Hi,
I have a i9003 that ran on stock 2.2.1 ROM and I've been having serious SOD problems.
Updated to 2.3.5 ZHKPD last night using KIES. The update was successful but gave me screen blackouts during calls (screen and buttons turned all black whenever I start a call. I heard voice but was never able to turn on the screen again) in addition to SOD problems.
I have then downloaded Odin 1.83, and "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" from here and tried to flash my phone again after reading a lot of guides on this forum.
I got a "Can't open the specified file" error from Odin (see attachment). Now when I turn on my phone all I see is a picture with a phone and a computer.
Was the re-partition cause of the problem?
Can someone here please let me know what I can do? To get 2.3.5 back into my phone?
Thanks in advance.
Did u flash XXKPE beefore flashing ???
If you have then try downloading the firmware from another source
I haven't - the "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" file is the only one I tried to flash.
It's phone from Hong Kong and I do want to keep something from the stock firmware, such as the Chinese input.
What do you suggest I should do next?
flash it again from xxkpe with the step "re-partition"
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Well, the only question is: Can you come into download mode?
If you can, just flash KPE>KPD and everything solved.
If you can't get a jig or go to service center.
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
dbowers said:
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Click to expand...
Click to collapse
Yes, XXKPE with pit, after that, ZCKPD WITHOUT pit
Use this guide for more help
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using XDA App
Thanks all for your help so far. I've now flashed it to XXKPE - going to flash ZHKPD now.
No prob
Sent from my GT-I9003 using XDA App
Related
My phone has running at stock ROM KB5. I have wipe all data (factory reset), then follow instrution of this topic http://forum.xda-developers.com/showthread.php?t=1001759. But the first time I forget uncheck Re-partition, Odin run all but Fail stop at Cache...(success 0, fail 1). I put phone into download mode to flashing again but Odin alway --> Fail, change another computer still Fail, I change flash stock KB5 rom still problem Fail, I change Odin 1.82 ---> Odin run to Cache.... and show "Odin3 Comunicator has stop working". PLEASE HELP ME.
Please help me..... I cant flash my phone
i do not know if it will help but do you have a pit file?
http://forum.xda-developers.com/showthread.php?t=1079123
I used the pit file here and it worked for me.
bateman26 said:
i do not know if it will help but do you have a pit file?
http://forum.xda-developers.com/showthread.php?t=1079123
I used the pit file here and it worked for me.
Click to expand...
Click to collapse
I have use file s1_odin_4G_Sedy.pit to flash rom, but get same problem, Odin still stuck at "cache.rfs". Fail ! I have tried flash rom via Heimdall and same result.
Maybe my phone hardware has problem ?
jackytran said:
I have use file s1_odin_4G_Sedy.pit to flash rom, but get same problem, Odin still stuck at "cache.rfs". Fail ! I have tried flash rom via Heimdall and same result.
Maybe my phone hardware has problem ?
Click to expand...
Click to collapse
Try the kc1 or kd1 without the .pit file
Sent from my Galaxy Tab running CM7
Well flahshing roms via CWM is likely not going to fix your problem, sounds like you may have changed your partition tables and will need to find a pit. I thought I read someone in the 4g forum made a working one.
Galaxy S4G Pit
Good Luck.
which kd1 rom are u trying to install. theres a kd1 rom the it was compress wrong by the programer.
Are you using Odin or heimdall what options are you selecting?
Are you able to get into download mode? (Do you see the guy with the shovel)
Make sure you have the proper usb drivers installed as well and that you are using
the factory usb cable, I have had issues with other cables.
I had the same problem, I just kept trying til it worked
Sent from my Galaxy Tab running CM7
sorry it sounds noob but i bought this phone recently. It is my first android phone. I downloaded odin and i have "I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar" file
now what am i gonna do ? just select "pda" then select this file and press start ?
and should i check "re-partition" ?
thanks for all answers.
Lol
Sent from my GT-I9003 using Tapatalk
manrock111 said:
Lol
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
don't LOL at him no one was born intelligent expect few ! and yes users should search things before but turkish people are not comfortable with english language so u should have either redirect him to a valuable post instead of making fun of him.
and btw i think he is asking weather he can directly flash his foryo os to the latest gb fw directly.
i think that he should post some more info regarding his ques..
-simmer
dorukc said:
sorry it sounds noob but i bought this phone recently. It is my first android phone. I downloaded odin and i have "I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar" file
now what am i gonna do ? just select "pda" then select this file and press start ?
and should i check "re-partition" ?
thanks for all answers.
Click to expand...
Click to collapse
Don't know buddy... If the file is one file as provided by odin than as per my understanding it should be flashed as pda...
Since it is an upgrade to xxkc1, you should be able to upgrade to gb from froyo. I would recommend downloading a froyo binary, hard reset the phone and then flash this file as pda. In case you get bootloop, go to recovery and remove cache and data and see if you can get to gb desktop...
If this didn't work, you should be able to downgrade to froyo....
I have seen drawbacks of gb bootloader... Lost 2 motherboards
Please take extra caution...i wrong be responsible for bricking or anything else
Sent from my GT-I9003 using XDA Premium App
dorukc said:
sorry it sounds noob but i bought this phone recently. It is my first android phone. I downloaded odin and i have "I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar" file
now what am i gonna do ? just select "pda" then select this file and press start ?
and should i check "re-partition" ?
thanks for all answers.
Click to expand...
Click to collapse
Hello All:
First of all thank this great work and I e know many waiting to be ported to a custom rom.
What I've done:
1) install the firmware THROUGH Odin. XXKPE
2) Install the firmware PDA XXKPH as Odin.
3) install GT-PDA-XXKPE I9003_PDA-fixed with Odin.
3) open and press SuperOneClickv1.9.1 GingerBreak and Root.
4) install CF-ROOT - I9003 - Beta as a PDA with Odin.
and voila, I have installed Legen _x_tripin and so far so good.
this is what I have done
I hope he does well
there's no such thing that Turkish people are not familiar with English.
as to your question, my friend, you need to flash XXKPE first. to do that, just make a quick search on this section. i'm sure you're gonna find what you need.
anyway, if you need help just send me a message.
Sent from my GT-I9003 using XDA App
First off: Flashing this firmware seems to be a bit problematic. I would suggest looking at the feedback thread beforehand.
A prerequisite to flashing this from FROYO would be to flash using the .pit file, the Boot file (APBOOT), the Modem file (PHONE), the multi-CSC file (CSC) from the XXKPE release from this link.
Use the file from this feedback thread (mentioned above too), as the PDA file.
First you must use just the .pit file in ODIN and check that re-partition is selected.
Hit reset.
Then add the aforementioned files to their respective sections in ODIN and flash.
Into my knowledge if you are on froyo then first flash with kpe with all available files under rar file(please follow flash guide thread ) then for kph (single Flash), select single file as PDA in odin then flash.
If you stuck on boot loop then factory reset your phone under recovery mode ok
I hope this will help you.
Sent from my GT-I9003 using Tapatalk
I9003XXKPE: http://www.multiupload.com/MU_EHEU3C4CV1
ROM: i9003XXKPH (Gingerbread 2.3.4):
[CF-ROOT][I9003] CF-ROOT for Gingerbread XXKPH : http://forum.xda-developers.com/attachment.php?attachmentid=692109&d=1313612038
ok
@jooode:
http://forum.xda-developers.com/attachment.php?attachmentid=692109&d=1313612038
--> is a dead link
dorukc said:
sorry it sounds noob but i bought this phone recently. It is my first android phone. I downloaded odin and i have "I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar" file
now what am i gonna do ? just select "pda" then select this file and press start ?
and should i check "re-partition" ?
thanks for all answers.
Click to expand...
Click to collapse
dude.... u can try this link.. i juz flashed based on this tutorial... very easy
http://forum.xda-developers.com/showthread.php?t=1133787
courtesy of @Misledz
After following kkrraazzyy 's instructions for rooting my Galaxy S I9003 which, according to the comments, seemed to work for a lot of people, I came across a problem.
After selecting the pit file, putting my phone into download mode, connecting the usb, and noting that the COM was recognized by Odin, I clicked start.
The process was running smoothly until it reached the Reset phase. At this point the phone screen's "Downloading" image went blank and has remained blank for a while now.
Help, Please!!
Odin is not use to root..Odin is for flashing firmware..
To flash firmware,follow the guide by Misledz here(Gingerbread only)..
http://forum.xda-developers.com/showthread.php?t=1133787
For root, use CF-root by skin1980(For xxkph & JPKP5 only)..
http://forum.xda-developers.com/showthread.php?t=1201062
For other froyo version,you can search from this forum..All guide is there~..
I followed the instructions but I'm still getting this blank screen once it reaches the reset! I don't think the phone is booting properly (or at all perhaps)...
Okay so basically here is the problem:
I wanted to root my Samsung Galaxy S I9003 (Build JPKC2). Unfortunately for me, I ended up flashing it instead of rooting it. I used Odin and everything was going smoothly (little did I know I was flashing not rooting) then when it came to the reset phase, my phone screen went from the downloading mode screen to a blank one.
Can someone please help me and tell me what to do?
Also if you need anymore information, please feel free to ask; just bear in mind that I can't access anything on the phone because it doesn't turn on.
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
shriomman said:
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
Click to expand...
Click to collapse
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
it is simple man..
step:
1- Flash XXKPE file, put all the file in the required box in Odin v1.83 then
1a- 3 check box are CHECK!
2- Flash XXKPH, only 1 required box needed which is PDA.
2a- 2 check box are CHECK!
root
1- Flash CF-Root kernel in Odin v1.83 under PDA.
finish
look the instruction given by member above..
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
ahmedrady459 said:
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
Click to expand...
Click to collapse
There are 2 method:-
1- CF-ROOT-XXKPH-05.09.2011.tar to flash using odin v1.83 under PDA
2- CF-ROOT-XXKPH-CWM_manager-05.09.2011.zip to flash using ClockWork Recovery
u can find this on 2nd post
thank you! but where is the second post?
lol same thread just u give me before..under 1st post is 2nd post
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
ahmedrady459 said:
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
Click to expand...
Click to collapse
yes i recommend u to use odin n flash that cf kernel.
about ur probs, im not very sure but u can try..if u r still facing the probs, u need to re-flash again from xxkpe
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
ahmedrady459 said:
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
Click to expand...
Click to collapse
Auto Reboot and F. Reset Time should CHECK!
left Re-Partition UNCHECK!
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
ahmedrady459 said:
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
Click to expand...
Click to collapse
maybe u should re-flash again from xxkpe then xxkph..make sure u do the right step..
this is my video http://www.youtube.com/watch?v=6l6hTuWWjLE
the video looks very helpful but do i put the xxkpe file in pit, pda, bootloader, phone, AND csc? All of them with the same xxkpe file?
yes..put all the xxkpe file in the required box.. put it all together..3 check box there should CHECK. hit start button and wait until boot into the system. then turn off your phone and go to downloading mode again
then
flash xxkph file, which is only 1 file and put it in the PDA..Re-partition should UNCHECK!
hit start button and wait until reboot into phone menu.
after that, turn off ur phone again and go to downloading mode and flash CF-Root
download the XXKPE and XXKPH here:-
http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Hi all.. I helped out a friend to root and install MIUI on his i9003, i myself use a captivate.
These were the steps taken: odin to xxkpe, then odin to xxkp7 then cwm flash to MIUI.
He would like to go back to stock as MIUI is not bug-free and its affecting him. Anyways, i was searching the forum and found a few threads regarding this but I am still confused.
Going back to stock from MIUI/cm7/cm9 from my captivate is just to run odin-1-click and everything is done. Here im using odin v1.85 and wish to go back to I9003DXKP9, as this is the official firmware here.
So in order to go back to stock, i just flash the I9003DXKP9 using odin? Another concern is the I9003DXKP9 firmware has just 1 file :
Code:
I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
and when i flashed XXKPE it had 5 files:
Code:
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar
latona_20110114.pit
MODEM_I9003XXKPE_REV_00_CL1041909.tar
I also read that if the firmware has only 1 file, just flash the pda and nothing else. So is it safe to assume that the process of going back to stock is just flashing the single firmware for DXKP9 or should i go back to XXKPE and then to DXKP9?? Any help would be greatly appreciated..
its better you first flash xxkpe then one file firmware, if u r reverting back from cm7/ miui/ cm9..
since sometimes phone gets into bootloop when just one file firmware is used to revert back to stock rom...
one file firmware is mainly used to upgrade from another stock firmware...
Hope i helped you..
suresh13 said:
I also read that if the firmware has only 1 file, just flash the pda and nothing else. So is it safe to assume that the process of going back to stock is just flashing the single firmware for DXKP9 or should i go back to XXKPE and then to DXKP9?? Any help would be greatly appreciated..
Click to expand...
Click to collapse
here is the guide for you.. http://forum.xda-developers.com/showthread.php?t=1133787
crk1995 said:
its better you first flash xxkpe then one file firmware, if u r reverting back from cm7/ miui/ cm9..
since sometimes phone gets into bootloop when just one file firmware is used to revert back to stock rom...
one file firmware is mainly used to upgrade from another stock firmware...
Hope i helped you..
Click to expand...
Click to collapse
Thanks, thats what i did just to be sure. Went back to xxkp3 and to dxkp9 rom. everything works fine now
On a side note, when i try to install cf-root for DXKP9, i get bootloop at sl9003 logo screen..
malungkot said:
here is the guide for you.. http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
Thanks, i already looked into that post, it does say all about upgrading but nothing about downgrading/installing the particular fw i want to go back to..
suresh13 said:
Thanks, thats what i did just to be sure. Went back to xxkp3 and to dxkp9 rom. everything works fine now
On a side note, when i try to install cf-root for DXKP9, i get bootloop at sl9003 logo screen..
Click to expand...
Click to collapse
check whether u r installing the right version of cf root...
install exactly the same version as ur fw has...
or go for universal cf root... its way more convenient...
note: i hope u meant xxkpe instead of xxkp3 ....
hi you all
HELP! Odin failed during upgrade to DXKP9
what should i do?
during the upgrade.Now when I turn on my phone all I see is a picture with a phone and a computer. Was the re-partition cause of the problem?
should i flash it first to DXKF1> DXKP9?
and i use latona came from this forum adn the odin
I used odin a thousand times and it never failed, you must be placing the CSC, PHONE, PDA and BOOT files in the wrong place... Or maybe you didn't use the latona file?
what should i do?
during the upgrade.Now when I turn on my phone all I see is a picture with a phone and a computer. Was the re-partition cause of the problem?
should i flash it first to DXKF1> DXKP9?
and i use latona came from this forum adn the odin
I found another post with that same problem of you... Try SEARCHING before posting, please!!
Apparently, your phone is not bricked, don't worry. Just follow the instructions they give here: http://forum.xda-developers.com/showthread.php?t=803693
I hope you can fix it!!
i can still get to download mode my problem is how can i pass the odin procedure
rheedakins said:
i can still get to download mode my problem is how can i pass the odin procedure
Click to expand...
Click to collapse
Don't panic.
Your phone is soft-bricked.
Just flash any stock rom(preferably XXKPE) via ODIN and you are good to go.
Get XXKPE from here:http://forum.xda-developers.com/showthread.php?t=1004647
Follow the guide here carefully: http://forum.xda-developers.com/showthread.php?t=1133787
Very clear instructions.
Should not be any problem.
Guys, dxkp9 is a single pack, u cant use pit file.
Now u have to flash dxkf1, than flash dxkp9
Sent from my GT-I9003 using Tapatalk