Hi all.. I helped out a friend to root and install MIUI on his i9003, i myself use a captivate.
These were the steps taken: odin to xxkpe, then odin to xxkp7 then cwm flash to MIUI.
He would like to go back to stock as MIUI is not bug-free and its affecting him. Anyways, i was searching the forum and found a few threads regarding this but I am still confused.
Going back to stock from MIUI/cm7/cm9 from my captivate is just to run odin-1-click and everything is done. Here im using odin v1.85 and wish to go back to I9003DXKP9, as this is the official firmware here.
So in order to go back to stock, i just flash the I9003DXKP9 using odin? Another concern is the I9003DXKP9 firmware has just 1 file :
Code:
I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
and when i flashed XXKPE it had 5 files:
Code:
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar
latona_20110114.pit
MODEM_I9003XXKPE_REV_00_CL1041909.tar
I also read that if the firmware has only 1 file, just flash the pda and nothing else. So is it safe to assume that the process of going back to stock is just flashing the single firmware for DXKP9 or should i go back to XXKPE and then to DXKP9?? Any help would be greatly appreciated..
its better you first flash xxkpe then one file firmware, if u r reverting back from cm7/ miui/ cm9..
since sometimes phone gets into bootloop when just one file firmware is used to revert back to stock rom...
one file firmware is mainly used to upgrade from another stock firmware...
Hope i helped you..
suresh13 said:
I also read that if the firmware has only 1 file, just flash the pda and nothing else. So is it safe to assume that the process of going back to stock is just flashing the single firmware for DXKP9 or should i go back to XXKPE and then to DXKP9?? Any help would be greatly appreciated..
Click to expand...
Click to collapse
here is the guide for you.. http://forum.xda-developers.com/showthread.php?t=1133787
crk1995 said:
its better you first flash xxkpe then one file firmware, if u r reverting back from cm7/ miui/ cm9..
since sometimes phone gets into bootloop when just one file firmware is used to revert back to stock rom...
one file firmware is mainly used to upgrade from another stock firmware...
Hope i helped you..
Click to expand...
Click to collapse
Thanks, thats what i did just to be sure. Went back to xxkp3 and to dxkp9 rom. everything works fine now
On a side note, when i try to install cf-root for DXKP9, i get bootloop at sl9003 logo screen..
malungkot said:
here is the guide for you.. http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
Thanks, i already looked into that post, it does say all about upgrading but nothing about downgrading/installing the particular fw i want to go back to..
suresh13 said:
Thanks, thats what i did just to be sure. Went back to xxkp3 and to dxkp9 rom. everything works fine now
On a side note, when i try to install cf-root for DXKP9, i get bootloop at sl9003 logo screen..
Click to expand...
Click to collapse
check whether u r installing the right version of cf root...
install exactly the same version as ur fw has...
or go for universal cf root... its way more convenient...
note: i hope u meant xxkpe instead of xxkp3 ....
Related
After following kkrraazzyy 's instructions for rooting my Galaxy S I9003 which, according to the comments, seemed to work for a lot of people, I came across a problem.
After selecting the pit file, putting my phone into download mode, connecting the usb, and noting that the COM was recognized by Odin, I clicked start.
The process was running smoothly until it reached the Reset phase. At this point the phone screen's "Downloading" image went blank and has remained blank for a while now.
Help, Please!!
Odin is not use to root..Odin is for flashing firmware..
To flash firmware,follow the guide by Misledz here(Gingerbread only)..
http://forum.xda-developers.com/showthread.php?t=1133787
For root, use CF-root by skin1980(For xxkph & JPKP5 only)..
http://forum.xda-developers.com/showthread.php?t=1201062
For other froyo version,you can search from this forum..All guide is there~..
I followed the instructions but I'm still getting this blank screen once it reaches the reset! I don't think the phone is booting properly (or at all perhaps)...
Okay so basically here is the problem:
I wanted to root my Samsung Galaxy S I9003 (Build JPKC2). Unfortunately for me, I ended up flashing it instead of rooting it. I used Odin and everything was going smoothly (little did I know I was flashing not rooting) then when it came to the reset phase, my phone screen went from the downloading mode screen to a blank one.
Can someone please help me and tell me what to do?
Also if you need anymore information, please feel free to ask; just bear in mind that I can't access anything on the phone because it doesn't turn on.
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
shriomman said:
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
Click to expand...
Click to collapse
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
it is simple man..
step:
1- Flash XXKPE file, put all the file in the required box in Odin v1.83 then
1a- 3 check box are CHECK!
2- Flash XXKPH, only 1 required box needed which is PDA.
2a- 2 check box are CHECK!
root
1- Flash CF-Root kernel in Odin v1.83 under PDA.
finish
look the instruction given by member above..
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
ahmedrady459 said:
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
Click to expand...
Click to collapse
There are 2 method:-
1- CF-ROOT-XXKPH-05.09.2011.tar to flash using odin v1.83 under PDA
2- CF-ROOT-XXKPH-CWM_manager-05.09.2011.zip to flash using ClockWork Recovery
u can find this on 2nd post
thank you! but where is the second post?
lol same thread just u give me before..under 1st post is 2nd post
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
ahmedrady459 said:
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
Click to expand...
Click to collapse
yes i recommend u to use odin n flash that cf kernel.
about ur probs, im not very sure but u can try..if u r still facing the probs, u need to re-flash again from xxkpe
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
ahmedrady459 said:
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
Click to expand...
Click to collapse
Auto Reboot and F. Reset Time should CHECK!
left Re-Partition UNCHECK!
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
ahmedrady459 said:
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
Click to expand...
Click to collapse
maybe u should re-flash again from xxkpe then xxkph..make sure u do the right step..
this is my video http://www.youtube.com/watch?v=6l6hTuWWjLE
the video looks very helpful but do i put the xxkpe file in pit, pda, bootloader, phone, AND csc? All of them with the same xxkpe file?
yes..put all the xxkpe file in the required box.. put it all together..3 check box there should CHECK. hit start button and wait until boot into the system. then turn off your phone and go to downloading mode again
then
flash xxkph file, which is only 1 file and put it in the PDA..Re-partition should UNCHECK!
hit start button and wait until reboot into phone menu.
after that, turn off ur phone again and go to downloading mode and flash CF-Root
download the XXKPE and XXKPH here:-
http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Hi,
I have a i9003 that ran on stock 2.2.1 ROM and I've been having serious SOD problems.
Updated to 2.3.5 ZHKPD last night using KIES. The update was successful but gave me screen blackouts during calls (screen and buttons turned all black whenever I start a call. I heard voice but was never able to turn on the screen again) in addition to SOD problems.
I have then downloaded Odin 1.83, and "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" from here and tried to flash my phone again after reading a lot of guides on this forum.
I got a "Can't open the specified file" error from Odin (see attachment). Now when I turn on my phone all I see is a picture with a phone and a computer.
Was the re-partition cause of the problem?
Can someone here please let me know what I can do? To get 2.3.5 back into my phone?
Thanks in advance.
Did u flash XXKPE beefore flashing ???
If you have then try downloading the firmware from another source
I haven't - the "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" file is the only one I tried to flash.
It's phone from Hong Kong and I do want to keep something from the stock firmware, such as the Chinese input.
What do you suggest I should do next?
flash it again from xxkpe with the step "re-partition"
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Well, the only question is: Can you come into download mode?
If you can, just flash KPE>KPD and everything solved.
If you can't get a jig or go to service center.
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
dbowers said:
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Click to expand...
Click to collapse
Yes, XXKPE with pit, after that, ZCKPD WITHOUT pit
Use this guide for more help
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using XDA App
Thanks all for your help so far. I've now flashed it to XXKPE - going to flash ZHKPD now.
No prob
Sent from my GT-I9003 using XDA App
how to get back to FROYO 2.2.1 DDKB2 firmware from XXKPQ firmware????????????
Flash the .pit then the XXKB3 three files...repeat it again then
Flash DDKB2 as PDA repeat this as well
Perform factory reset after every flash
i dont understand what do u mean by repeat it again.and is .pit means xxkpe?
Why u want to go back to froyo when u have better gingerbread rom...?
hey buddy i just want to know in case of emergency so pls tell me about ranhoovers reply.....
ronhoover88 said:
Flash the .pit then the XXKB3 three files...repeat it again then
Flash DDKB2 as PDA repeat this as well
Perform factory reset after every flash
Click to expand...
Click to collapse
does xxkb3 come with the pit file? the rom thread doesn't specify and I won't download just to find out.
in another thread, someone stated that there is a separate pit file for froyo vs GB, and that you can't use the GB pit file for going back to froyo.
I found a froyo pit file, but I can't confirm how good it is since it's not on the sammy site or here on xda. the page to get the file is here
burninghouse said:
i dont understand what do u mean by repeat it again.and is .pit means xxkpe?
Click to expand...
Click to collapse
no, I don't know what it stands for (google could tell me if I was interested...), but the pit file is for designating partition sizes, which is necessary when installing different versions of fw, like froyo vs GB.
See the below link for flashing guide and there you will find the pit file for froyo
http://forum.xda-developers.com/showpost.php?p=12310540&postcount=1
so ranhoover u mean dat i can follow dis way:-????
xxkpe->xxkb3(twice)->ddkb2(twice)
so should i go in dis way:-????
xxkpe->xxkb3->ddkb2
Who is ran hoover??
XXKB3(twice)-DDKB2(twice)
Dont bother looking at XXKPE!!
If you still want GB after flashing DDKB2 get back here i'll tell you how to do it
Hi everyone,
I had GT i9003 with 2.3.6 as the firmware.
I recently flashed custom ROM CM10-GalaxySL-JZO54K-Alpha4.zip , which worked fine intially.
Later due to network problems i tried restoring to my original firmware.
After doing the restore I am stuck.
Right now whatever i do the phone comes back to CWM recovery. I have tried to flash the phone again with
different custom ROMs, but after saying the installation complete the phone again reboots to CWM recovery.
Hope i have made my problem clear.
can anyone put some light on this?????
hey dude CM10 A4 has different partition,you must flash from pit,you can't restore you GB file from CM10 A4
MR.Volkf said:
hey dude CM10 A4 has different partition,you must flash from pit,you can't restore you GB file from CM10 A4
Click to expand...
Click to collapse
Thanks for the reply
Could you please guide me how to do that??
NastyRom said:
Thanks for the reply
Could you please guide me how to do that??
Click to expand...
Click to collapse
Flash latona.pit...then XXKPE , Then DDLF2...latona.pit will reset ur partition...
When flashing from CM10 ALpha4 latona.pit then XXKPE but DONT include BOOTLOADER.
same problem
I have same problem can anyone plz tell me in detail what to do..??
ASAP
This will work..!!
all-stock roms - http://forum.xda-developers.com/showthread.php?t=1004647
first install I9003XXKPQ (with 4 files + pit alt link: http://www.mediafire.com/?ka3krtzka2oho88)
Then install I9003DDLF2
NastyRom said:
Could you please guide me how to do that??
Click to expand...
Click to collapse
If you made a NANDROID(CWM) backup of your GingerBread 2.3.6 firmware, you won´t be able restore it while still on CM10.(as mentioned by MR.Volkf).
I suppose you know that to get back to 2.3.6 you will need to use ODIN to flash the firmwares previously mentioned.
If you´re not familiar with the proper steps involved with ODIN, here´s a great guide on how to do that, thanks to "Misledz".
http://forum.xda-developers.com/showthread.php?t=1133787
Once you get back to GB(2.3.6), then I believe you should be able to restore any GB NANDROID backups that you may have previously made.(From the restore option in CWM recovery mode).
Good Luck!
thanku
amitkpatil.20 said:
all-stock roms - http://forum.xda-developers.com/showthread.php?t=1004647
first install I9003XXKPQ (with 4 files + pit alt link: http://www.mediafire.com/?ka3krtzka2oho88)
Then install I9003DDLF2
Click to expand...
Click to collapse
:good:thanks so much
Hi
This may be a repeated request. Just to wanted to get a confirm link which should have Tab2 GT-P3100 Stock Rom & Recovery and process to go back to stock.
Thanks.
Please refer here....
http://forum.xda-developers.com/showthread.php?p=38273172
If you need latest recovery from other locations pm me I will give ready link....
Hope I helped you...
adishakthi said:
Please refer here....
http://forum.xda-developers.com/showthread.php?p=38273172
If you need latest recovery from other locations pm me I will give ready link....
Hope I helped you...
Click to expand...
Click to collapse
I think this is what I needed. Just wanted to make sure I have everything when I brick my tablet and need to claim warranty. I hope the Baseband and Stock Recovery need ODIN installation and the installation steps for both are same.
I could not find out any tutorial here, how to use ODIN. If can somebody made one, bcoz there are peoples who wants to go back to stock ROM and this will help them.
Baseband
Version: P3100 DDCLK1
Android :4.1.1
Downliad link:
http://www.mediafire.com/?a8mv3tc8tx6xwkh
Stock recovery:
http://www.mediafire.com/download.php?bur55ysr1xl52vo
Firmware:
http://www.hotfile.com/dl/183584982/...1_INU.zip.html
BTW: I am presently with Adi's SungSonic HD Rom:good: and it is better than CM10.1 (My experience, no offense)
@ Adi
Can you please guide me step by step flashing Stock ROM using ODIN.
I googled and know little bit of ODIN flashing..Just need to select PDA and flash it once my phone detected by ODIN.
But I have 3 diff package here..
Recovery
Baseband
Firmware
How can I flash all of these by ODIN?
KSKHH said:
@ Adi
Can you please guide me step by step flashing Stock ROM using ODIN.
I googled and know little bit of ODIN flashing..Just need to select PDA and flash it once my phone detected by ODIN.
But I have 3 diff package here..
Recovery
Baseband
Firmware
How can I flash all of these by ODIN?
Click to expand...
Click to collapse
Firmware is an total package that contains all elements.......including bootloader. ...
Flash it via pc Odin pc Odin. ......
Before flashing whole firmware it is recommended to flash stock recovery and kernel via mobile Odin. ....
I have provided baseband and recover separately. ....
Because some people may need only baseband and they don't want to flash everything. .....
adishakthi said:
Firmware is an total package that contains all elements.......including bootloader. ...
Flash it via pc Odin pc Odin. ......
Before flashing whole firmware it is recommended to flash stock recovery and kernel via mobile Odin. ....
I have provided baseband and recover separately. ....
Because some people may need only baseband and they don't want to flash everything. .....
Click to expand...
Click to collapse
So if I download the Firmware then I will get stock recovery and Kernel as well...Am I right?
Can you please tell me file names for those?
So after flashing Stock Recovery & Kernel...I have to flash the firmware which will again flash Stock Recovery & Kernel..
Edit: I have flashed stock firmware.