Problem Rooting Samsung Galaxy S I9003 using Odin - Samsung Galaxy SL i9003

After following kkrraazzyy 's instructions for rooting my Galaxy S I9003 which, according to the comments, seemed to work for a lot of people, I came across a problem.
After selecting the pit file, putting my phone into download mode, connecting the usb, and noting that the COM was recognized by Odin, I clicked start.
The process was running smoothly until it reached the Reset phase. At this point the phone screen's "Downloading" image went blank and has remained blank for a while now.
Help, Please!!

Odin is not use to root..Odin is for flashing firmware..
To flash firmware,follow the guide by Misledz here(Gingerbread only)..
http://forum.xda-developers.com/showthread.php?t=1133787
For root, use CF-root by skin1980(For xxkph & JPKP5 only)..
http://forum.xda-developers.com/showthread.php?t=1201062
For other froyo version,you can search from this forum..All guide is there~..

I followed the instructions but I'm still getting this blank screen once it reaches the reset! I don't think the phone is booting properly (or at all perhaps)...

Okay so basically here is the problem:
I wanted to root my Samsung Galaxy S I9003 (Build JPKC2). Unfortunately for me, I ended up flashing it instead of rooting it. I used Odin and everything was going smoothly (little did I know I was flashing not rooting) then when it came to the reset phase, my phone screen went from the downloading mode screen to a blank one.
Can someone please help me and tell me what to do?
Also if you need anymore information, please feel free to ask; just bear in mind that I can't access anything on the phone because it doesn't turn on.

LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]

okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?

shriomman said:
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
Click to expand...
Click to collapse
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?

it is simple man..
step:
1- Flash XXKPE file, put all the file in the required box in Odin v1.83 then
1a- 3 check box are CHECK!
2- Flash XXKPH, only 1 required box needed which is PDA.
2a- 2 check box are CHECK!
root
1- Flash CF-Root kernel in Odin v1.83 under PDA.
finish
look the instruction given by member above..

okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062

ahmedrady459 said:
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
Click to expand...
Click to collapse
There are 2 method:-
1- CF-ROOT-XXKPH-05.09.2011.tar to flash using odin v1.83 under PDA
2- CF-ROOT-XXKPH-CWM_manager-05.09.2011.zip to flash using ClockWork Recovery
u can find this on 2nd post

thank you! but where is the second post?

lol same thread just u give me before..under 1st post is 2nd post

oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?

ahmedrady459 said:
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
Click to expand...
Click to collapse
yes i recommend u to use odin n flash that cf kernel.
about ur probs, im not very sure but u can try..if u r still facing the probs, u need to re-flash again from xxkpe

okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?

ahmedrady459 said:
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
Click to expand...
Click to collapse
Auto Reboot and F. Reset Time should CHECK!
left Re-Partition UNCHECK!

I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S

ahmedrady459 said:
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
Click to expand...
Click to collapse
maybe u should re-flash again from xxkpe then xxkph..make sure u do the right step..
this is my video http://www.youtube.com/watch?v=6l6hTuWWjLE

the video looks very helpful but do i put the xxkpe file in pit, pda, bootloader, phone, AND csc? All of them with the same xxkpe file?

yes..put all the xxkpe file in the required box.. put it all together..3 check box there should CHECK. hit start button and wait until boot into the system. then turn off your phone and go to downloading mode again
then
flash xxkph file, which is only 1 file and put it in the PDA..Re-partition should UNCHECK!
hit start button and wait until reboot into phone menu.
after that, turn off ur phone again and go to downloading mode and flash CF-Root
download the XXKPE and XXKPH here:-
http://forum.xda-developers.com/showthread.php?p=12310841#post12310841

Related

[HELP] How to flash i9003 [XXKPH]

sorry it sounds noob but i bought this phone recently. It is my first android phone. I downloaded odin and i have "I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar" file
now what am i gonna do ? just select "pda" then select this file and press start ?
and should i check "re-partition" ?
thanks for all answers.
Lol
Sent from my GT-I9003 using Tapatalk
manrock111 said:
Lol
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
don't LOL at him no one was born intelligent expect few ! and yes users should search things before but turkish people are not comfortable with english language so u should have either redirect him to a valuable post instead of making fun of him.
and btw i think he is asking weather he can directly flash his foryo os to the latest gb fw directly.
i think that he should post some more info regarding his ques..
-simmer
dorukc said:
sorry it sounds noob but i bought this phone recently. It is my first android phone. I downloaded odin and i have "I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar" file
now what am i gonna do ? just select "pda" then select this file and press start ?
and should i check "re-partition" ?
thanks for all answers.
Click to expand...
Click to collapse
Don't know buddy... If the file is one file as provided by odin than as per my understanding it should be flashed as pda...
Since it is an upgrade to xxkc1, you should be able to upgrade to gb from froyo. I would recommend downloading a froyo binary, hard reset the phone and then flash this file as pda. In case you get bootloop, go to recovery and remove cache and data and see if you can get to gb desktop...
If this didn't work, you should be able to downgrade to froyo....
I have seen drawbacks of gb bootloader... Lost 2 motherboards
Please take extra caution...i wrong be responsible for bricking or anything else
Sent from my GT-I9003 using XDA Premium App
dorukc said:
sorry it sounds noob but i bought this phone recently. It is my first android phone. I downloaded odin and i have "I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar" file
now what am i gonna do ? just select "pda" then select this file and press start ?
and should i check "re-partition" ?
thanks for all answers.
Click to expand...
Click to collapse
Hello All:
First of all thank this great work and I e know many waiting to be ported to a custom rom.
What I've done:
1) install the firmware THROUGH Odin. XXKPE
2) Install the firmware PDA XXKPH as Odin.
3) install GT-PDA-XXKPE I9003_PDA-fixed with Odin.
3) open and press SuperOneClickv1.9.1 GingerBreak and Root.
4) install CF-ROOT - I9003 - Beta as a PDA with Odin.
and voila, I have installed Legen _x_tripin and so far so good.
this is what I have done
I hope he does well
there's no such thing that Turkish people are not familiar with English.
as to your question, my friend, you need to flash XXKPE first. to do that, just make a quick search on this section. i'm sure you're gonna find what you need.
anyway, if you need help just send me a message.
Sent from my GT-I9003 using XDA App
First off: Flashing this firmware seems to be a bit problematic. I would suggest looking at the feedback thread beforehand.
A prerequisite to flashing this from FROYO would be to flash using the .pit file, the Boot file (APBOOT), the Modem file (PHONE), the multi-CSC file (CSC) from the XXKPE release from this link.
Use the file from this feedback thread (mentioned above too), as the PDA file.
First you must use just the .pit file in ODIN and check that re-partition is selected.
Hit reset.
Then add the aforementioned files to their respective sections in ODIN and flash.
Into my knowledge if you are on froyo then first flash with kpe with all available files under rar file(please follow flash guide thread ) then for kph (single Flash), select single file as PDA in odin then flash.
If you stuck on boot loop then factory reset your phone under recovery mode ok
I hope this will help you.
Sent from my GT-I9003 using Tapatalk
I9003XXKPE: http://www.multiupload.com/MU_EHEU3C4CV1
ROM: i9003XXKPH (Gingerbread 2.3.4):
[CF-ROOT][I9003] CF-ROOT for Gingerbread XXKPH : http://forum.xda-developers.com/attachment.php?attachmentid=692109&d=1313612038
ok
@jooode:
http://forum.xda-developers.com/attachment.php?attachmentid=692109&d=1313612038
--> is a dead link
dorukc said:
sorry it sounds noob but i bought this phone recently. It is my first android phone. I downloaded odin and i have "I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar" file
now what am i gonna do ? just select "pda" then select this file and press start ?
and should i check "re-partition" ?
thanks for all answers.
Click to expand...
Click to collapse
dude.... u can try this link.. i juz flashed based on this tutorial... very easy
http://forum.xda-developers.com/showthread.php?t=1133787
courtesy of @Misledz

[Q] xxkph

after flashing my galaxy sl i9003 using xxkph it is done smoothly but after restart my mobile it doesn't start normaly it is restarting aain and again and recovery mode doesn't appear how to fix this issue
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
hi brother
i didnt take any backup i am a biginer that do so..
the reason is my first fw is froyo i just updated to xwkpg(2.3.5) via kies and again flashed with odin ie gb ver xxkpq (2.3.6) then try to instal cf root but it is not suite for my fw after restarting nothing appear on my phone ten somebody give me a post to do wit xxkph i try this via odil 3 to 5 times it comes boot screen and do not enter ome screen then someone post me to do with xxkb3 this fw is prograssing download what i do to come my ome screen pls help me bro
Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
pls brother kindly give me a solution
Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
wiping data/factory reset it shows e:format_volume: rfs format failed on /dev/block/set11o error message
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
hi brother
both download and recovery modes r working but again same problem
Uan_ar said:
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Just download and flash kb3 ,then tells me did phone reboot if yes then I will help further.
I know KB3 WILL solve your problem.
Sent from my GT-I9003 using Tapatalk
Uan_ar said:
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Click to expand...
Click to collapse
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
praveenpravi47 said:
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Click to expand...
Click to collapse
You have to extract the files from the .rar of the KPE (password is samfirmware.com).
praveenpravi47 said:
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
Click to expand...
Click to collapse
i'm sorry but i didn't understand you. Will you please rephrase it? You could flash it ok and also the cf-root? Did you follow all the instructions, step by step? Did you do a factory reset?
If it is not working yet, maybe you could try to flash the kb3, just like manrock111 said. He is much more experienced than i in this kind of things.
file extension problem
i searched for the files and downloaded it butits its extension is .tar.md5 can i use it like that?
Wow my phone is now working :thumbup::thumbup::thumbup::thumbup:
Sent from my GT-I9003 using xda premium

[Q] xxkph problem after flashing

after flashing galaxy sl i9003 with xxkph using odin its going well, but after first boot it shows language selection option it is normal. but every restart it shows same option how to solve this:
praveenpravi47 said:
after flashing galaxy sl i9003 with xxkph using odin its going well, but after first boot it shows language selection option it is normal. but every restart it shows same option how to solve this:
Click to expand...
Click to collapse
had happened to me also after foll steps:
1) flash kpe pit file only. (didnt have entire zip so had flashed pit only)
2) flash kpq (only pda)
resulted in the above problem
-----------------------------------
so had to flash complete kpe, ie all the 5 files-pit, bootloader, pda, modem and csc, and after reboot flashed kpq, only pda.
then no problem.
hi bro
where i get these five files i search every were but no results could u post me a link? pls
praveenpravi47 said:
where i get these five files i search every were but no results could u post me a link? pls
Click to expand...
Click to collapse
mediafire.com/?geydlhgbck7aofb
or
select xxkpe link from here
http://forum.xda-developers.com/showthread.php?t=1004647

HELP! Odin failed during upgrade to ZHKPD

Hi,
I have a i9003 that ran on stock 2.2.1 ROM and I've been having serious SOD problems.
Updated to 2.3.5 ZHKPD last night using KIES. The update was successful but gave me screen blackouts during calls (screen and buttons turned all black whenever I start a call. I heard voice but was never able to turn on the screen again) in addition to SOD problems.
I have then downloaded Odin 1.83, and "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" from here and tried to flash my phone again after reading a lot of guides on this forum.
I got a "Can't open the specified file" error from Odin (see attachment). Now when I turn on my phone all I see is a picture with a phone and a computer.
Was the re-partition cause of the problem?
Can someone here please let me know what I can do? To get 2.3.5 back into my phone?
Thanks in advance.
Did u flash XXKPE beefore flashing ???
If you have then try downloading the firmware from another source
I haven't - the "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" file is the only one I tried to flash.
It's phone from Hong Kong and I do want to keep something from the stock firmware, such as the Chinese input.
What do you suggest I should do next?
flash it again from xxkpe with the step "re-partition"
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Well, the only question is: Can you come into download mode?
If you can, just flash KPE>KPD and everything solved.
If you can't get a jig or go to service center.
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
dbowers said:
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Click to expand...
Click to collapse
Yes, XXKPE with pit, after that, ZCKPD WITHOUT pit
Use this guide for more help
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using XDA App
Thanks all for your help so far. I've now flashed it to XXKPE - going to flash ZHKPD now.
No prob
Sent from my GT-I9003 using XDA App

[Q] PLease help!!! odin flash fails!!!

hi you all
HELP! Odin failed during upgrade to DXKP9
what should i do?
during the upgrade.Now when I turn on my phone all I see is a picture with a phone and a computer. Was the re-partition cause of the problem?
should i flash it first to DXKF1> DXKP9?
and i use latona came from this forum adn the odin
I used odin a thousand times and it never failed, you must be placing the CSC, PHONE, PDA and BOOT files in the wrong place... Or maybe you didn't use the latona file?
what should i do?
during the upgrade.Now when I turn on my phone all I see is a picture with a phone and a computer. Was the re-partition cause of the problem?
should i flash it first to DXKF1> DXKP9?
and i use latona came from this forum adn the odin
I found another post with that same problem of you... Try SEARCHING before posting, please!!
Apparently, your phone is not bricked, don't worry. Just follow the instructions they give here: http://forum.xda-developers.com/showthread.php?t=803693
I hope you can fix it!!
i can still get to download mode my problem is how can i pass the odin procedure
rheedakins said:
i can still get to download mode my problem is how can i pass the odin procedure
Click to expand...
Click to collapse
Don't panic.
Your phone is soft-bricked.
Just flash any stock rom(preferably XXKPE) via ODIN and you are good to go.
Get XXKPE from here:http://forum.xda-developers.com/showthread.php?t=1004647
Follow the guide here carefully: http://forum.xda-developers.com/showthread.php?t=1133787
Very clear instructions.
Should not be any problem.
Guys, dxkp9 is a single pack, u cant use pit file.
Now u have to flash dxkf1, than flash dxkp9
Sent from my GT-I9003 using Tapatalk

Categories

Resources