hi you all
HELP! Odin failed during upgrade to DXKP9
what should i do?
during the upgrade.Now when I turn on my phone all I see is a picture with a phone and a computer. Was the re-partition cause of the problem?
should i flash it first to DXKF1> DXKP9?
and i use latona came from this forum adn the odin
I used odin a thousand times and it never failed, you must be placing the CSC, PHONE, PDA and BOOT files in the wrong place... Or maybe you didn't use the latona file?
what should i do?
during the upgrade.Now when I turn on my phone all I see is a picture with a phone and a computer. Was the re-partition cause of the problem?
should i flash it first to DXKF1> DXKP9?
and i use latona came from this forum adn the odin
I found another post with that same problem of you... Try SEARCHING before posting, please!!
Apparently, your phone is not bricked, don't worry. Just follow the instructions they give here: http://forum.xda-developers.com/showthread.php?t=803693
I hope you can fix it!!
i can still get to download mode my problem is how can i pass the odin procedure
rheedakins said:
i can still get to download mode my problem is how can i pass the odin procedure
Click to expand...
Click to collapse
Don't panic.
Your phone is soft-bricked.
Just flash any stock rom(preferably XXKPE) via ODIN and you are good to go.
Get XXKPE from here:http://forum.xda-developers.com/showthread.php?t=1004647
Follow the guide here carefully: http://forum.xda-developers.com/showthread.php?t=1133787
Very clear instructions.
Should not be any problem.
Guys, dxkp9 is a single pack, u cant use pit file.
Now u have to flash dxkf1, than flash dxkp9
Sent from my GT-I9003 using Tapatalk
Related
My phone has running at stock ROM KB5. I have wipe all data (factory reset), then follow instrution of this topic http://forum.xda-developers.com/showthread.php?t=1001759. But the first time I forget uncheck Re-partition, Odin run all but Fail stop at Cache...(success 0, fail 1). I put phone into download mode to flashing again but Odin alway --> Fail, change another computer still Fail, I change flash stock KB5 rom still problem Fail, I change Odin 1.82 ---> Odin run to Cache.... and show "Odin3 Comunicator has stop working". PLEASE HELP ME.
Please help me..... I cant flash my phone
i do not know if it will help but do you have a pit file?
http://forum.xda-developers.com/showthread.php?t=1079123
I used the pit file here and it worked for me.
bateman26 said:
i do not know if it will help but do you have a pit file?
http://forum.xda-developers.com/showthread.php?t=1079123
I used the pit file here and it worked for me.
Click to expand...
Click to collapse
I have use file s1_odin_4G_Sedy.pit to flash rom, but get same problem, Odin still stuck at "cache.rfs". Fail ! I have tried flash rom via Heimdall and same result.
Maybe my phone hardware has problem ?
jackytran said:
I have use file s1_odin_4G_Sedy.pit to flash rom, but get same problem, Odin still stuck at "cache.rfs". Fail ! I have tried flash rom via Heimdall and same result.
Maybe my phone hardware has problem ?
Click to expand...
Click to collapse
Try the kc1 or kd1 without the .pit file
Sent from my Galaxy Tab running CM7
Well flahshing roms via CWM is likely not going to fix your problem, sounds like you may have changed your partition tables and will need to find a pit. I thought I read someone in the 4g forum made a working one.
Galaxy S4G Pit
Good Luck.
which kd1 rom are u trying to install. theres a kd1 rom the it was compress wrong by the programer.
Are you using Odin or heimdall what options are you selecting?
Are you able to get into download mode? (Do you see the guy with the shovel)
Make sure you have the proper usb drivers installed as well and that you are using
the factory usb cable, I have had issues with other cables.
I had the same problem, I just kept trying til it worked
Sent from my Galaxy Tab running CM7
After following kkrraazzyy 's instructions for rooting my Galaxy S I9003 which, according to the comments, seemed to work for a lot of people, I came across a problem.
After selecting the pit file, putting my phone into download mode, connecting the usb, and noting that the COM was recognized by Odin, I clicked start.
The process was running smoothly until it reached the Reset phase. At this point the phone screen's "Downloading" image went blank and has remained blank for a while now.
Help, Please!!
Odin is not use to root..Odin is for flashing firmware..
To flash firmware,follow the guide by Misledz here(Gingerbread only)..
http://forum.xda-developers.com/showthread.php?t=1133787
For root, use CF-root by skin1980(For xxkph & JPKP5 only)..
http://forum.xda-developers.com/showthread.php?t=1201062
For other froyo version,you can search from this forum..All guide is there~..
I followed the instructions but I'm still getting this blank screen once it reaches the reset! I don't think the phone is booting properly (or at all perhaps)...
Okay so basically here is the problem:
I wanted to root my Samsung Galaxy S I9003 (Build JPKC2). Unfortunately for me, I ended up flashing it instead of rooting it. I used Odin and everything was going smoothly (little did I know I was flashing not rooting) then when it came to the reset phase, my phone screen went from the downloading mode screen to a blank one.
Can someone please help me and tell me what to do?
Also if you need anymore information, please feel free to ask; just bear in mind that I can't access anything on the phone because it doesn't turn on.
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
shriomman said:
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
Click to expand...
Click to collapse
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
it is simple man..
step:
1- Flash XXKPE file, put all the file in the required box in Odin v1.83 then
1a- 3 check box are CHECK!
2- Flash XXKPH, only 1 required box needed which is PDA.
2a- 2 check box are CHECK!
root
1- Flash CF-Root kernel in Odin v1.83 under PDA.
finish
look the instruction given by member above..
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
ahmedrady459 said:
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
Click to expand...
Click to collapse
There are 2 method:-
1- CF-ROOT-XXKPH-05.09.2011.tar to flash using odin v1.83 under PDA
2- CF-ROOT-XXKPH-CWM_manager-05.09.2011.zip to flash using ClockWork Recovery
u can find this on 2nd post
thank you! but where is the second post?
lol same thread just u give me before..under 1st post is 2nd post
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
ahmedrady459 said:
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
Click to expand...
Click to collapse
yes i recommend u to use odin n flash that cf kernel.
about ur probs, im not very sure but u can try..if u r still facing the probs, u need to re-flash again from xxkpe
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
ahmedrady459 said:
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
Click to expand...
Click to collapse
Auto Reboot and F. Reset Time should CHECK!
left Re-Partition UNCHECK!
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
ahmedrady459 said:
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
Click to expand...
Click to collapse
maybe u should re-flash again from xxkpe then xxkph..make sure u do the right step..
this is my video http://www.youtube.com/watch?v=6l6hTuWWjLE
the video looks very helpful but do i put the xxkpe file in pit, pda, bootloader, phone, AND csc? All of them with the same xxkpe file?
yes..put all the xxkpe file in the required box.. put it all together..3 check box there should CHECK. hit start button and wait until boot into the system. then turn off your phone and go to downloading mode again
then
flash xxkph file, which is only 1 file and put it in the PDA..Re-partition should UNCHECK!
hit start button and wait until reboot into phone menu.
after that, turn off ur phone again and go to downloading mode and flash CF-Root
download the XXKPE and XXKPH here:-
http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
after flashing galaxy sl i9003 with xxkph using odin its going well, but after first boot it shows language selection option it is normal. but every restart it shows same option how to solve this:
praveenpravi47 said:
after flashing galaxy sl i9003 with xxkph using odin its going well, but after first boot it shows language selection option it is normal. but every restart it shows same option how to solve this:
Click to expand...
Click to collapse
had happened to me also after foll steps:
1) flash kpe pit file only. (didnt have entire zip so had flashed pit only)
2) flash kpq (only pda)
resulted in the above problem
-----------------------------------
so had to flash complete kpe, ie all the 5 files-pit, bootloader, pda, modem and csc, and after reboot flashed kpq, only pda.
then no problem.
hi bro
where i get these five files i search every were but no results could u post me a link? pls
praveenpravi47 said:
where i get these five files i search every were but no results could u post me a link? pls
Click to expand...
Click to collapse
mediafire.com/?geydlhgbck7aofb
or
select xxkpe link from here
http://forum.xda-developers.com/showthread.php?t=1004647
Hi,
I have a i9003 that ran on stock 2.2.1 ROM and I've been having serious SOD problems.
Updated to 2.3.5 ZHKPD last night using KIES. The update was successful but gave me screen blackouts during calls (screen and buttons turned all black whenever I start a call. I heard voice but was never able to turn on the screen again) in addition to SOD problems.
I have then downloaded Odin 1.83, and "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" from here and tried to flash my phone again after reading a lot of guides on this forum.
I got a "Can't open the specified file" error from Odin (see attachment). Now when I turn on my phone all I see is a picture with a phone and a computer.
Was the re-partition cause of the problem?
Can someone here please let me know what I can do? To get 2.3.5 back into my phone?
Thanks in advance.
Did u flash XXKPE beefore flashing ???
If you have then try downloading the firmware from another source
I haven't - the "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" file is the only one I tried to flash.
It's phone from Hong Kong and I do want to keep something from the stock firmware, such as the Chinese input.
What do you suggest I should do next?
flash it again from xxkpe with the step "re-partition"
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Well, the only question is: Can you come into download mode?
If you can, just flash KPE>KPD and everything solved.
If you can't get a jig or go to service center.
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
dbowers said:
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Click to expand...
Click to collapse
Yes, XXKPE with pit, after that, ZCKPD WITHOUT pit
Use this guide for more help
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using XDA App
Thanks all for your help so far. I've now flashed it to XXKPE - going to flash ZHKPD now.
No prob
Sent from my GT-I9003 using XDA App
hi all
I did a hard reset and then i'm getting bootloops,i tried to flash a rom from sd card with odin and i got operation aborted.please advise how can i unbrick it
flash original samsung firmware via windows ODIN
it happens to me before
Firmware finds here
http://forum.xda-developers.com/showthread.php?t=1367478
thanks,i tried that but seems i also need a pit file and for bootloader i need a tar file format,from the firmwares i downloaded i get a md5 file,tell me pls where do i find them or how do i do?
just put that md5 files to pda section in odin... then flash away...
oh... btw... use window version of odin from 1st post.
edan1979 said:
just put that md5 files to pda section in odin... then flash away...
oh... btw... use window version of odin from 1st post.
Click to expand...
Click to collapse
did that already...and still have bootloop
EDIT: WORKS! after flash did factory reset and cache wipe!
Thank you all for sugestions
i am trying to flash official version of samsung galaxy gt6200 through odin but cant get done :S....first time flashing my tab ...plzz any suggessions ?