after flashing my galaxy sl i9003 using xxkph it is done smoothly but after restart my mobile it doesn't start normaly it is restarting aain and again and recovery mode doesn't appear how to fix this issue
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
hi brother
i didnt take any backup i am a biginer that do so..
the reason is my first fw is froyo i just updated to xwkpg(2.3.5) via kies and again flashed with odin ie gb ver xxkpq (2.3.6) then try to instal cf root but it is not suite for my fw after restarting nothing appear on my phone ten somebody give me a post to do wit xxkph i try this via odil 3 to 5 times it comes boot screen and do not enter ome screen then someone post me to do with xxkb3 this fw is prograssing download what i do to come my ome screen pls help me bro
Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
pls brother kindly give me a solution
Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
wiping data/factory reset it shows e:format_volume: rfs format failed on /dev/block/set11o error message
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
hi brother
both download and recovery modes r working but again same problem
Uan_ar said:
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Just download and flash kb3 ,then tells me did phone reboot if yes then I will help further.
I know KB3 WILL solve your problem.
Sent from my GT-I9003 using Tapatalk
Uan_ar said:
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Click to expand...
Click to collapse
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
praveenpravi47 said:
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Click to expand...
Click to collapse
You have to extract the files from the .rar of the KPE (password is samfirmware.com).
praveenpravi47 said:
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
Click to expand...
Click to collapse
i'm sorry but i didn't understand you. Will you please rephrase it? You could flash it ok and also the cf-root? Did you follow all the instructions, step by step? Did you do a factory reset?
If it is not working yet, maybe you could try to flash the kb3, just like manrock111 said. He is much more experienced than i in this kind of things.
file extension problem
i searched for the files and downloaded it butits its extension is .tar.md5 can i use it like that?
Wow my phone is now working :thumbup::thumbup::thumbup::thumbup:
Sent from my GT-I9003 using xda premium
Related
After following kkrraazzyy 's instructions for rooting my Galaxy S I9003 which, according to the comments, seemed to work for a lot of people, I came across a problem.
After selecting the pit file, putting my phone into download mode, connecting the usb, and noting that the COM was recognized by Odin, I clicked start.
The process was running smoothly until it reached the Reset phase. At this point the phone screen's "Downloading" image went blank and has remained blank for a while now.
Help, Please!!
Odin is not use to root..Odin is for flashing firmware..
To flash firmware,follow the guide by Misledz here(Gingerbread only)..
http://forum.xda-developers.com/showthread.php?t=1133787
For root, use CF-root by skin1980(For xxkph & JPKP5 only)..
http://forum.xda-developers.com/showthread.php?t=1201062
For other froyo version,you can search from this forum..All guide is there~..
I followed the instructions but I'm still getting this blank screen once it reaches the reset! I don't think the phone is booting properly (or at all perhaps)...
Okay so basically here is the problem:
I wanted to root my Samsung Galaxy S I9003 (Build JPKC2). Unfortunately for me, I ended up flashing it instead of rooting it. I used Odin and everything was going smoothly (little did I know I was flashing not rooting) then when it came to the reset phase, my phone screen went from the downloading mode screen to a blank one.
Can someone please help me and tell me what to do?
Also if you need anymore information, please feel free to ask; just bear in mind that I can't access anything on the phone because it doesn't turn on.
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
shriomman said:
LOL !!! u put the file in the PIT location !! lol.. just download kpe and kph and flash using this guide http://forum.xda-developers.com/showthread.php?t=1133787
and to root just flash that in odin
http://forum.xda-developers.com/showthread.php?t=1201062
[size=+2]READ THE INSTRUCTIONS CAREFULLY 2ce BEFORE ACTUALLY FLASHING IT ![/size]
Click to expand...
Click to collapse
okay to root, which .tar file do I download?
and will it work? I don't think the phone is booting! Will rooting it fix this problem?
it is simple man..
step:
1- Flash XXKPE file, put all the file in the required box in Odin v1.83 then
1a- 3 check box are CHECK!
2- Flash XXKPH, only 1 required box needed which is PDA.
2a- 2 check box are CHECK!
root
1- Flash CF-Root kernel in Odin v1.83 under PDA.
finish
look the instruction given by member above..
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
ahmedrady459 said:
okay I follow, that's great...I'm just wondering which file I should use from here:
http://forum.xda-developers.com/showthread.php?t=1201062
Click to expand...
Click to collapse
There are 2 method:-
1- CF-ROOT-XXKPH-05.09.2011.tar to flash using odin v1.83 under PDA
2- CF-ROOT-XXKPH-CWM_manager-05.09.2011.zip to flash using ClockWork Recovery
u can find this on 2nd post
thank you! but where is the second post?
lol same thread just u give me before..under 1st post is 2nd post
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
ahmedrady459 said:
oh! sorry about that.. thanks
so if I'm using odin i just put CF-ROOT-XXKPH-05.09.2011.tar into the pda and run it?
and that should fix my whole problem, including the boot issue?
Click to expand...
Click to collapse
yes i recommend u to use odin n flash that cf kernel.
about ur probs, im not very sure but u can try..if u r still facing the probs, u need to re-flash again from xxkpe
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
ahmedrady459 said:
okay just one last question...which check boxes should be checked when I'm using odin and CF-ROOT-XXKPH-05.09.2011.tar into the pda?
Click to expand...
Click to collapse
Auto Reboot and F. Reset Time should CHECK!
left Re-Partition UNCHECK!
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
ahmedrady459 said:
I got the same problem! When the device is supposed to reboot, the screen stays blank. It doesn't reboot! What do I do!? :S
Click to expand...
Click to collapse
maybe u should re-flash again from xxkpe then xxkph..make sure u do the right step..
this is my video http://www.youtube.com/watch?v=6l6hTuWWjLE
the video looks very helpful but do i put the xxkpe file in pit, pda, bootloader, phone, AND csc? All of them with the same xxkpe file?
yes..put all the xxkpe file in the required box.. put it all together..3 check box there should CHECK. hit start button and wait until boot into the system. then turn off your phone and go to downloading mode again
then
flash xxkph file, which is only 1 file and put it in the PDA..Re-partition should UNCHECK!
hit start button and wait until reboot into phone menu.
after that, turn off ur phone again and go to downloading mode and flash CF-Root
download the XXKPE and XXKPH here:-
http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
after flashing galaxy sl i9003 with xxkph using odin its going well, but after first boot it shows language selection option it is normal. but every restart it shows same option how to solve this:
praveenpravi47 said:
after flashing galaxy sl i9003 with xxkph using odin its going well, but after first boot it shows language selection option it is normal. but every restart it shows same option how to solve this:
Click to expand...
Click to collapse
had happened to me also after foll steps:
1) flash kpe pit file only. (didnt have entire zip so had flashed pit only)
2) flash kpq (only pda)
resulted in the above problem
-----------------------------------
so had to flash complete kpe, ie all the 5 files-pit, bootloader, pda, modem and csc, and after reboot flashed kpq, only pda.
then no problem.
hi bro
where i get these five files i search every were but no results could u post me a link? pls
praveenpravi47 said:
where i get these five files i search every were but no results could u post me a link? pls
Click to expand...
Click to collapse
mediafire.com/?geydlhgbck7aofb
or
select xxkpe link from here
http://forum.xda-developers.com/showthread.php?t=1004647
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
here is the picture
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
ibaz said:
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
Click to expand...
Click to collapse
can any one see the picture at all??? because i cant ....
ok well now the phone is pretty much got stuck at the firmware screen as show in the picture...it got stuck like this after i install it with oldin
and when i choose install from zip my first choice is REMICS-I9003-V1.5 second is I9003XXKPE both wont install... it will just abort...after few second...
i have no idea what i have done totally new to this just dont want to paid local phone shop 50$ usd just to root it so try it my self
not sure what went wrong im a bit confuse with how to use oldin so maybe that the problem i saw there is PIT bootloader PDA phone and CSC...
not sure what to put
so at pit i uselatona 20110114.pit downloaded from XDA link
and PDA i use CM9 ALPHA8 GT I9003 PDA
that all i know...oh crap...
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
ibaz said:
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
Click to expand...
Click to collapse
i can boot into recovery mode and download mode
some other guy helped me out im able to got my phone working again i make mistake on odin file
so now my problem is how can i ICS on it... or at least with touchwiz 4 or something
all i want to do is to install REMICS-I9003-V1.5
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
ibaz said:
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
Click to expand...
Click to collapse
i went to this page but i dont know the step to install this rom.
starcraft2010 said:
i went to this page but i dont know the step to install this rom.
Click to expand...
Click to collapse
Step by step
1. Do Nandroid backup
2. Do a factory reset/data wipe (of course you can try to install the ROM over other ICS roms)
4. Install the ROM
5. Reboot (automatically)
6. Wait till full boot of your phone
Note: Do not Format Data after the installation of ROM. Just wipe cache and dalvik cache!!
Click to expand...
Click to collapse
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
i think ur internal memory may be corrupted so if u r under warrranty flash any stock rom and take it to the service centre so if really it its internal memory is corrupted they will replace the motherboard if u r under warranty.
Hetalk said:
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
Click to expand...
Click to collapse
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
starcraft2010 said:
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
Click to expand...
Click to collapse
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Hetalk said:
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Click to expand...
Click to collapse
no im not... i need more help on step 4 LIKE HOW TO INSTALL CWM firmware on normal android..stuff like that...
starcraft2010 said:
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
Click to expand...
Click to collapse
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
ganeshbiyer said:
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
Click to expand...
Click to collapse
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
starcraft2010 said:
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
Click to expand...
Click to collapse
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
ok sound great i assume if every thing is done correct i should be able to install the RemICS v1.5 then wish me luck
thanks man
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
well now i got a working normal unrooted GB 2.3.4 if i want to root it what are my step? i got ext4 format thingy and when i try to install the ICS it said abort again...
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Hetalk said:
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Click to expand...
Click to collapse
YO IM ON REMIS ics now but the problem now is it russian... and i cant read russian lol
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...
Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
Help please...
Click to expand...
Click to collapse
refer to this thread http://forum.xda-developers.com/showthread.php?t=1894737 the first guide on how to upgrade to GB. Not saying ur in FROYO but it has the same step. Follow carefully
just did all steps in the guide with JPKPH not XXPQ... but still rebooting...
Arabi3d said:
just did all steps in the guide with JPKPH not XXPQ... but still rebooting...
Click to expand...
Click to collapse
Your phone has corrupted NAND memory probably.
chriz74 said:
Your phone has corrupted NAND memory probably.
Click to expand...
Click to collapse
How to fix it???
I flashed a MIUI and it worked perfectly... but when i enter Recovery mode and make mount and storage\ format dbdata it shows error...
also if i restore my stock rom JXKP3 or flash a new stock rom it keeps reboot again and the Factory Reset doesn't work....
please if anybody knows a solution please tell me...
Flash xxkpe then ddlf2
sent from Samsung galaxy S i9003 Remics JB v3
Send to the samsung service.. It's hardware problem..
Sent from my GT-I9003 using Tapatalk 2
Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...
Click to expand...
Click to collapse
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash
chongns said:
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash
Click to expand...
Click to collapse
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???
Arabi3d said:
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???
Click to expand...
Click to collapse
this problem are not so technical. so i request you to search the forum.
hits. search for arabic patch.
Sent from my Galaxy Nexus using Tapatalk 2
hi all
i have got my friends I9003 for some day usage
its certain i dont like 2.3.7 as i am using xperia arc s with 4.0.4 original xperia T Rom by Zoeb0001
so to have ics experiance on samsung i have flash [ROM][PORT][Android 4.0.4] RemICS v1.5.3 - SIII look
and every thing is working fine but no getting network
what i have done till the time is below
1 rooted phone with the help of DDKP1-CFROOT-19-12-2011.tar
2. then flash this rom: [ROM][PORT][Android 4.0.4] RemICS v1.5.3 - SIII look
and not getting network using vodafone india 3G network
any help
thanx in adavence
1. flash ddlf2 firmware from her http://www.hotfile.com/dl/161660941/...2_INU.zip.html and password for zip is sampro.pl OR samfirmware
2. then flash cf-root from here http://www.mediafire.com/?0ndawa4g0s851h4 then go to recovery mode by pressing volume up,home button and power button
3. Wipe Data / Factory Reset.
4. Select the rom in recovery
5.and install
6.your device will be rebooted.
sent from Samsung galaxy S i9003 Remics JB v3
first link
karanmirchandani96 said:
1. flash ddlf2 firmware from her http://www.hotfile.com/dl/161660941/...2_INU.zip.html and password for zip is sampro.pl OR samfirmware
2. then flash cf-root from here http://www.mediafire.com/?0ndawa4g0s851h4 then go to recovery mode by pressing volume up,home button and power button
3. Wipe Data / Factory Reset.
4. Select the rom in recovery
5.and install
6.your device will be rebooted.
sent from Samsung galaxy S i9003 Remics JB v3
Click to expand...
Click to collapse
first link firmware ddlf2 not working
chauhanjayc said:
first link firmware ddlf2 not working
Click to expand...
Click to collapse
here u go.. http://www.hotfile.com/dl/161660941/8fd61ef/I9003DDLF2_I9003ODDLF2_INU.zip.html
how to flash Help
Hi friends,
last week i try to flash remics on my i9003.
below steps are followed during flashing.
1.am downloaded remics, odin and cf root.
2.first i did I9003_latona_20110114.pit file load in odin and put my mobile download mode
and check re-partition, auto reboot,f.reset time and click the start button.
3.after that i loaded cf root on PDA and uncheck the re-partition and clicked the start button it completed and mobile started to root explorer.
4.then i copied remics file to memory card and put it in mobile.
5.Now wipe all the data and try to install remics , but it shows assert failed error.
6.now my mobile lost the old firmware 2.3.6 unable to use it..
7.please friends help me to resolve this problem.
8.finally i try to flash DDLF2 (2.3.6) gingerbread from this link http://forum.xda-developers.com/showthread.php?t=1004647,
but i got continues reboot of samsung logo. i don't know which files to load in BOOTLOADER,PDA,PHONE,CSC in odin please help..
hariharasuthan said:
Hi friends,
last week i try to flash remics on my i9003.
below steps are followed during flashing.
1.am downloaded remics, odin and cf root.
2.first i did I9003_latona_20110114.pit file load in odin and put my mobile download mode
and check re-partition, auto reboot,f.reset time and click the start button.
3.after that i loaded cf root on PDA and uncheck the re-partition and clicked the start button it completed and mobile started to root explorer.
4.then i copied remics file to memory card and put it in mobile.
5.Now wipe all the data and try to install remics , but it shows assert failed error.
6.now my mobile lost the old firmware 2.3.6 unable to use it..
7.please friends help me to resolve this problem.
8.finally i try to flash DDLF2 (2.3.6) gingerbread from this link http://forum.xda-developers.com/showthread.php?t=1004647,
but i got continues reboot of samsung logo. i don't know which files to load in BOOTLOADER,PDA,PHONE,CSC in odin please help..
Click to expand...
Click to collapse
Refer this for flashing guide..
http://forum.xda-developers.com/showthread.php?t=1004622
Sent from my GT-I9003 using xda premium
File missing
kishankpadiyar said:
Refer this for flashing guide..
http://forum.xda-developers.com/showthread.php?t=1004622
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
thanks for the reply dude..
where should i get this files .. the link does't having this files..
8.Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
hariharasuthan said:
thanks for the reply dude..
where should i get this files .. the link does't having this files..
8.Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
Click to expand...
Click to collapse
1. download XXKPE from here.. http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
then flash using odin as in the instructions..
2. let it boot and then do factory reset then Download DDLF2.. which has only single file.. and put that in PDA section and flash again..
NOTE: XXKPE has the 3 files ua asking about..
Thank you
thanks dude ,
now am running 2.3.4 ...
can u please guide me to install remics ??
hariharasuthan said:
thanks dude ,
now am running 2.3.4 ...
can u please guide me to install remics ??
Click to expand...
Click to collapse
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Select the ROM zip from your SD Card and flash.
4. Go to Advanced -> Reboot Recovery.
5. After the Recovery restarts, Wipe Data / Factory Reset.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Rooting
for root the mobile below file is correct??
ZHKPE-CFROOT-25-05-2012.tar
is this file alone loaded in PDA and latona.pit or any other file needed for Rooting??
---------- Post added at 04:14 PM ---------- Previous post was at 03:20 PM ----------
kishankpadiyar said:
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Select the ROM zip from your SD Card and flash.
4. Go to Advanced -> Reboot Recovery.
5. After the Recovery restarts, Wipe Data / Factory Reset.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Click to expand...
Click to collapse
for root the mobile below file is correct??
ZHKPE-CFROOT-25-05-2012.tar
is this file alone loaded in PDA and latona.pit or any other file needed for Rooting??
hariharasuthan said:
for root the mobile below file is correct??
ZHKPE-CFROOT-25-05-2012.tar
is this file alone loaded in PDA and latona.pit or any other file needed for Rooting??
---------- Post added at 04:14 PM ---------- Previous post was at 03:20 PM ----------
for root the mobile below file is correct??
ZHKPE-CFROOT-25-05-2012.tar
is this file alone loaded in PDA and latona.pit or any other file needed for Rooting??
Click to expand...
Click to collapse
Since i dont know which Rom ua on.. so u can try universal cf root from here http://forum.xda-developers.com/showthread.php?t=1351056
or download the exact cf root file for your firmware from here http://forum.xda-developers.com/showpost.php?p=19018861&postcount=1
Cf root Help
kishankpadiyar said:
Since i dont know which Rom ua on.. so u can try universal cf root from here http://forum.xda-developers.com/showthread.php?t=1351056
or download the exact cf root file for your firmware from here http://forum.xda-developers.com/showpost.php?p=19018861&postcount=1
Click to expand...
Click to collapse
hi friend,
i have attached the version of my mobile.
i have tried bagaria-09.GT-I9003_PDA and CF-ROOT-XXKPH-21.08.2011 for rooting but i got black screen and no further boot up.
so reflash the DDLF2 and using it.
please guide me how to root with this file and flash remics.
hariharasuthan said:
hi friend,
i have attached the version of my mobile.
i have tried bagaria-09.GT-I9003_PDA and CF-ROOT-XXKPH-21.08.2011 for rooting but i got black screen and no further boot up.
so reflash the DDLF2 and using it.
please guide me how to root with this file and flash remics.
Click to expand...
Click to collapse
Flash this file for LF2... I use this.. there may be updated files.. bt never mind for that.. just flash this..
then enter recovery.. flash Remics rom.. reboot recovery.. wipe data/ factory reset.. clear dalvik cache.. flash gapps n reboot..
thanks
kishankpadiyar said:
Flash this file for LF2... I use this.. there may be updated files.. bt never mind for that.. just flash this..
then enter recovery.. flash Remics rom.. reboot recovery.. wipe data/ factory reset.. clear dalvik cache.. flash gapps n reboot..
Click to expand...
Click to collapse
thank you friend now am running remics:good:... thanks for the guidance:angel: