Database Info

[Q] xxkph

after flashing my galaxy sl i9003 using xxkph it is done smoothly but after restart my mobile it doesn't start normaly it is restarting aain and again and recovery mode doesn't appear how to fix this issue

Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?

hi brother
i didnt take any backup i am a biginer that do so..
the reason is my first fw is froyo i just updated to xwkpg(2.3.5) via kies and again flashed with odin ie gb ver xxkpq (2.3.6) then try to instal cf root but it is not suite for my fw after restarting nothing appear on my phone ten somebody give me a post to do wit xxkph i try this via odil 3 to 5 times it comes boot screen and do not enter ome screen then someone post me to do with xxkb3 this fw is prograssing download what i do to come my ome screen pls help me bro

Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
pls brother kindly give me a solution

Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
wiping data/factory reset it shows e:format_volume: rfs format failed on /dev/block/set11o error message

can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787

hi brother
both download and recovery modes r working but again same problem

Uan_ar said:
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls

Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.

Just download and flash kb3 ,then tells me did phone reboot if yes then I will help further.
I know KB3 WILL solve your problem.
Sent from my GT-I9003 using Tapatalk

Uan_ar said:
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Click to expand...
Click to collapse
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?

praveenpravi47 said:
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Click to expand...
Click to collapse
You have to extract the files from the .rar of the KPE (password is samfirmware.com).
praveenpravi47 said:
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
Click to expand...
Click to collapse
i'm sorry but i didn't understand you. Will you please rephrase it? You could flash it ok and also the cf-root? Did you follow all the instructions, step by step? Did you do a factory reset?
If it is not working yet, maybe you could try to flash the kb3, just like manrock111 said. He is much more experienced than i in this kind of things.

file extension problem
i searched for the files and downloaded it butits its extension is .tar.md5 can i use it like that?

Wow my phone is now working :thumbup::thumbup::thumbup::thumbup:
Sent from my GT-I9003 using xda premium

bootloop - no baseband

hi guys, hope somebody can help,
I got an i9003 on botloop. Sometime it hangs on samsung logo.
I'd like to reflash it to stock kernel / rom but the phone was given to me already with this problem, so I don't know the baseband. I've been reading and believe you need to know the baseband in order to know what fw/ rom to use?
so my question is how to know the baseband or how to re-stock phone.
many thanks,
regards,
moncho

moncho12 said:
hi guys, hope somebody can help,
I got an i9003 on botloop. Sometime it hangs on samsung logo.
I'd like to reflash it to stock kernel / rom but the phone was given to me already with this problem, so I don't know the baseband. I've been reading and believe you need to know the baseband in order to know what fw/ rom to use?
so my question is how to know the baseband or how to re-stock phone.
many thanks,
regards,
moncho
Click to expand...
Click to collapse
I'd say phone is already on bootloop. Try flashing xxkpe using odin.
Use below 2 thread for help on flashing xxkpe
http://forum.xda-developers.com/showthread.php?t=1004647
http://forum.xda-developers.com/showthread.php?t=1133787
Once you get out of bootloop post here and someone can help you further.

Hetalk said:
I'd say phone is already on bootloop. Try flashing xxkpe using odin.
Use below 2 thread for help on flashing xxkpe
http://forum.xda-developers.com/showthread.php?t=1004647
http://forum.xda-developers.com/showthread.php?t=1133787
Once you get out of bootloop post here and someone can help you further.
Click to expand...
Click to collapse
will do!
I'll get back with update, thanks!
:good:

moncho12 said:
will do!
I'll get back with update, thanks!
:good:
Click to expand...
Click to collapse
I've followed the instructions on the XXKPE section and uploaded the latona file and then the whole I9003XXKPE package. things went smoothly.
then the phone boots into recovery and starts installing... but shows this 2 error messages:
E:failed to mount /data (no such file or directory)
-- wiping data...
formating /data...
E:format_volume: rfs format failed on /dev/block/mmcblk0p3
data wipe failed
I must say the sd card I got is from a photo camera and I haven't formatted it.
ANY SUGGESTIONS? at the moment the phone is bootlooping.
edit:
Reading a lot:It seems that it could be hw problem, internal memory...
Also it could be some combination of rom/ pit or no pit / re-partition or not etc. guess I'll keep trying..
thanks!!

moncho12 said:
I've followed the instructions on the XXKPE section and uploaded the latona file and then the whole I9003XXKPE package. things went smoothly.
then the phone boots into recovery and starts installing... but shows this 2 error messages:
E:failed to mount /data (no such file or directory)
-- wiping data...
formating /data...
E:format_volume: rfs format failed on /dev/block/mmcblk0p3
data wipe failed
I must say the sd card I got is from a photo camera and I haven't formatted it.
ANY SUGGESTIONS? at the moment the phone is bootlooping.
edit:
Reading a lot:It seems that it could be hw problem, internal memory...
Also it could be some combination of rom/ pit or no pit / re-partition or not etc. guess I'll keep trying..
thanks!!
Click to expand...
Click to collapse
yes keep on trying and if it boots dial *#06# to see if IMEI is still there and if its not then ur EFS folder has been corrupted and the only way to bring it back to normal is the sammy center..

moncho12 said:
I've followed the instructions on the XXKPE section and uploaded the latona file and then the whole I9003XXKPE package. things went smoothly.
then the phone boots into recovery and starts installing... but shows this 2 error messages:
E:failed to mount /data (no such file or directory)
-- wiping data...
formating /data...
E:format_volume: rfs format failed on /dev/block/mmcblk0p3
data wipe failed
I must say the sd card I got is from a photo camera and I haven't formatted it.
ANY SUGGESTIONS? at the moment the phone is bootlooping.
edit:
Reading a lot:It seems that it could be hw problem, internal memory...
Also it could be some combination of rom/ pit or no pit / re-partition or not etc. guess I'll keep trying..
thanks!!
Click to expand...
Click to collapse
once i had got same problem with above error as you shown. flashing kpe had solved my problem.

ur internal memory may be corrupted i had faced the same problem u can refer to this threads http://forum.xda-developers.com/showthread.php?t=1735718 and http://forum.xda-developers.com/showthread.php?t=1241574

Help... it keeps rebooting

My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...

Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
Help please...
Click to expand...
Click to collapse
refer to this thread http://forum.xda-developers.com/showthread.php?t=1894737 the first guide on how to upgrade to GB. Not saying ur in FROYO but it has the same step. Follow carefully

just did all steps in the guide with JPKPH not XXPQ... but still rebooting...

Arabi3d said:
just did all steps in the guide with JPKPH not XXPQ... but still rebooting...
Click to expand...
Click to collapse
Your phone has corrupted NAND memory probably.

chriz74 said:
Your phone has corrupted NAND memory probably.
Click to expand...
Click to collapse
How to fix it???
I flashed a MIUI and it worked perfectly... but when i enter Recovery mode and make mount and storage\ format dbdata it shows error...
also if i restore my stock rom JXKP3 or flash a new stock rom it keeps reboot again and the Factory Reset doesn't work....
please if anybody knows a solution please tell me...

Flash xxkpe then ddlf2
sent from Samsung galaxy S i9003 Remics JB v3

Send to the samsung service.. It's hardware problem..
Sent from my GT-I9003 using Tapatalk 2

Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...
Click to expand...
Click to collapse
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash

chongns said:
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash
Click to expand...
Click to collapse
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???

Arabi3d said:
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???
Click to expand...
Click to collapse
this problem are not so technical. so i request you to search the forum.
hits. search for arabic patch.
Sent from my Galaxy Nexus using Tapatalk 2

Bricked phone,

I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
E:failed to mount /data (No such file or directory)
E: failed to mount /sdcard (File exists)
E: copy_cache _media: Can't mount /sdcard
your storage not prepared yet,p lese use UI menu for format and reboot actions
Click to expand...
Click to collapse
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...

jutopa said:
I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...
Click to expand...
Click to collapse
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...

deDante said:
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...
Click to expand...
Click to collapse
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same

jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
Froyo has diferent bootloader than gb,ics,jb and kk. Try to flash only pit pull battery and then flash full ddlf2 with all files except pit. Good luck.

jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...

deDante said:
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...
Click to expand...
Click to collapse
Didn't work. Pretty sure that internal sd is broken.. hardware problem.

jutopa said:
Didn't work. Pretty sure that internal sd is broken.. hardware problem.
Click to expand...
Click to collapse
after flashing you get success Froyo on your device or not???

deDante said:
after flashing you get success Froyo on your device or not???
Click to expand...
Click to collapse
Noup. Reboots into recovery and got error message in recovery (the one I quoted before). After reboot, bootloop in samsung logo.

you got PASS message on odin after you flash froyo???
if PASS message appear you should be got success froyo installing and you can continue to backup you efs..
Sent from my GT-I9003 using XDA Premium 4

[Q] Can't flash stock firmware... Always boot loop after flashing

Hi!
I have tried all different kinds of stock firmwares including India, Germany... Odin starts succesfully, finishes, but when it goes to recovery mode it shows data error:
it says that system/csc/TWO/system is missing.. also i can't apply sd card update.. I tried both cache and data reset.. Nothing works
Please help

Hi follow that thread pls.
http://forum.xda-developers.com/showthread.php?p=51886671#post51886671

ahmetakin said:
Hi follow that thread pls.
http://forum.xda-developers.com/showthread.php?p=51886671#post51886671
Click to expand...
Click to collapse
This topic isn't answering anything..
The thing is that i can flash to stock.. i goes well.. but after flashing i'm stuck with bootloop..
I thing i need 4 file rom.. i only found 1 file rom from sammmobile.com

I did it.. I needed to flash it with 4 file firmware
It looks like it was something wrong with csc or something like that
Thanks!

plzzzz tell me the linkkkk.......
where u found the 4 file firmware
i have this error

Sanjay(SUN) said:
plzzzz tell me the linkkkk.......
where u found the 4 file firmware
i have this error
Click to expand...
Click to collapse
you can download firmwares at
sammobile.com .Just create ur
account and then u can download.

sana415 said:
you can download firmwares at
sammobile.com .Just create ur
account and then u can download.
Click to expand...
Click to collapse
Absolutely!!