Database Info

GT-I9003 restart

hi ,
i had restarting problem with my galaxy SL GT-I9003
its rom foryo 2.2.1
i change the rom by odin from 2.2.1 to 2.3.4
and had the same problem
and back it to 2.2.1 and no solution..
this like my problem ....
http://www.youtube.com/watch?v=k1cNc8dzUmc
plz any help
when i enter the recovery i see this text
--Movi_check start..!!
Movinand open fail
Movinand Checksum Confirmation Fail
1fs pass open fail
--movi_checking undone!...
update medis, please wait
E: Can't mount /dev/block/mmcb1k0p1
(No such file or directory)
E: copy_dbdata_meadia:Can't mount SDCARD:
your storage not prepared yet , please use UI menu for format and reboot actions.
copy default media content failed.
Click to expand...
Click to collapse
hellllllllllllllllllp

any help

what firmware version on are you right now?

noypi_ako said:
what firmware version on are you right now?
Click to expand...
Click to collapse
firmware version foryo 2.2.1

i mean, DXKB or XXKP or something ?

the problem is the ext4, when you flash stock room do not have ext support, simply flash vurrutv8 over xxkpq and problem gone
or re format it with pit to rfs, easy!
Sent from my GT-I9003 using xda premium

i mean, DXKB or XXKP or something ?
Click to expand...
Click to collapse
Where do I know?
-------
I9003JPKD1_CL913246_PDA_Kernel
I9003JXKA4_CL856203_Phone.tar
I9003OJPKC2_CL964196_CSC.tar
-------
velve.ffff said:
the problem is the ext4, when you flash stock room do not have ext support, simply flash vurrutv8 over xxkpq and problem gone
or re format it with pit to rfs, easy!
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I Beginner
Can you explain to me the way step by step plz
its 2.2.1

read this carefully and follow every step written on it for XXKPQ
http://forum.xda-developers.com/showthread.php?t=1133787
you have to download 2 firmwares XXKPE and XXKPQ
read and then follow that guide carefully

noypi_ako said:
read this carefully and follow every step written on it for XXKPQ
http://forum.xda-developers.com/showthread.php?t=1133787
you have to download 2 firmwares XXKPE and XXKPQ
read and then follow that guide carefully
Click to expand...
Click to collapse
can u give me links of the 2 firmwares plz ><

Roua Got your PM. Sorry I didn't reply there, but you can get it from sammobile.com, You can download the firmware's there properly as most of them have taken off the firmware links from hotlink due to being deleted by SOPA issues. Anyways you can get it re-downloaded there. You only need to extract it once from it's current ZIP file and not twice Follow my guide and everything should go great from there.
Hopefully if you get stuck you can follow up with me

noypi_ako said:
read this carefully and follow every step written on it for XXKPQ
http://forum.xda-developers.com/showthread.php?t=1133787
you have to download 2 firmwares XXKPE and XXKPQ
read and then follow that guide carefully
Click to expand...
Click to collapse
ohhh plz
i did what u say
but it's keeps restarting .. and without starting tune
its stuck at samsung logo again..

You and me are in same situation
http://forum.xda-developers.com/showthread.php?t=1622695
Hope we will get a way out.

androidn00bie said:
You and me are in same situation
http://forum.xda-developers.com/showthread.php?t=1622695
Hope we will get a way out.
Click to expand...
Click to collapse
i hope so

boot loop from samsung logo
I am also facing similar problem.I think we have to fix the internal sdcard "E:" access problem then we have to proceed to normal Rom flashing.
please anybody help us.
Thanks

ok
i will explain better,
when you flash a custom room like cm, poseidon or so, partition, our disk are formatted to ext 4 type, re flash to xxkpq don't back to rfs,xxkpq kernel, doesn't have ext 4 support, and of course, starts fail and stuck to logo for this reason, try to flash uc kernel or another kernel with ext 4 to get your device working, if doesn't work, try to re flash xxkpe with pit and re format (if you don't know how follow guide, now I can't point you because I'm from my phone)
Sent from my GT-I9003 using xda premium

velve.ffff said:
ok
i will explain better,
when you flash a custom room like cm, poseidon or so, partition, our disk are formatted to ext 4 type, re flash to xxkpq don't back to rfs,xxkpq kernel, doesn't have ext 4 support, and of course, starts fail and stuck to logo for this reason, try to flash uc kernel or another kernel with ext 4 to get your device working, if doesn't work, try to re flash xxkpe with pit and re format (if you don't know how follow guide, now I can't point you because I'm from my phone)
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
most of them havent flashed any roms besides stock. im running out of ideas already besides telling them to bring it to service center.

noypi_ako said:
most of them havent flashed any roms besides stock. im running out of ideas already besides telling them to bring it to service center.
Click to expand...
Click to collapse
i found "clockwork" way in the following link we might try it
Thanks

sazu1976 said:
i found "clockwork" way in the following link we might try it
Thanks
Click to expand...
Click to collapse
and here is the link
http://forum.xda-developers.com/showthread.php?t=1151704

i don't understand wt to do now
explain plz

ohhhhhhhh i think i had problem here
after flashed to xxkpq
when i enter the recovery i see this
i think i stuck in 3e maybe ?!!
android system recovery <3e>
E: failed to mount / data (no such file or directory )
--copying media files...
E: failed to mount / sdcard (File exists)
E:copy_cache_media:can't mount /sdcard
your storage not prepared yet,please use UI menu for format and reboot actions
meida files copy failed
# MANUAL MODE #
--appling multi-CSC...
installing multi-CSC
cant access to '/system/csc/MID/system/'.
successfully applied multi-CSC

[HELP!!!] P6200--Tons of error in recovery mode

Sorry to avoid hijacking other post...
That's the step how I get to this...
ICS with wifi not working
Odin back to HC with same .PIT
Completed once, while cant google-login, saying android.setting error
Try to use odin to return to ICS, with the same .PIT file...
Bricked...cant enter recovery, but only download mode
Use Heimdall to flash the recovery.img from previous page
Successfully entered recovery, but showing this...
#Manual Mode#
-- Updating Application...
E:failed to mount /system (Invalid argument)
E: install_application_for_customer: Can't mount /system
copy application failed.
-- Appling Multi-CSC...
E:failed to mount /system (Invalid argument)
E:multi_csc: cant mount /system
Multi-csc applied failed.
Can also enter download mode, while odin now cant recognize it...
Thank you~~~
and sorry that i am too green to post link.....><
Did i brick my tab.... ><
ht tp://i10.photobucket.com/albums/a106/lokfukobe/IMG042.jpg

are you using P6200 or P6200L or maybe some other series? and what ICS are you flashing? Austria Open (XXLQ1)?
what odin version you used? odin3 v.1.85?
is it any possibility the HC or ICS stock ROM is broken?
what CWM version do you use?
can you post the log on odin after flashing back to HC?

motosuki said:
are you using P6200 or P6200L or maybe some other series? and what ICS are you flashing? Austria Open (XXLQ1)?
what odin version you used? odin3 v.1.85?
is it any possibility the HC or ICS stock ROM is broken?
what CWM version do you use?
Click to expand...
Click to collapse
Thanks motosuki, :crying::crying:
I think mine is P6200, I m from HK, while when I bought it from others(2nd hand), it's flashed with UK HC rom.
Then I flashed XXLQ1 using MobileODIN...
Afterthat, I used odin3 v1.85 to flash back to HC, and of cos during this period that I cannot even boot up into system...
I have done numerous factory reset...= =
UM....and sorry, I m not quite sure if I use any CWM....now the recovery heading shows...(3e)
:crying::crying::crying: Thanks for your kindly help~~~~

lokfukobe said:
Thanks motosuki, :crying::crying:
I think mine is P6200, I m from HK, while when I bought it from others(2nd hand), it's flashed with UK HC rom.
Then I flashed XXLQ1 using MobileODIN...
Afterthat, I used odin3 v1.85 to flash back to HC, and of cos during this period that I cannot even boot up into system...
I have done numerous factory reset...= =
UM....and sorry, I m not quite sure if I use any CWM....
:crying::crying::crying: Thanks for your kindly help~~~~
Click to expand...
Click to collapse
have you try flashing to ICS with the pit file? try use this pit file.
use odin3 v.1.85, check re-partition, auto reboot, and f.reset time. put the XXLQ1 ROM on PDA and make sure its on tar.md5 format.
i hope it work.

motosuki said:
are you using P6200 or P6200L or maybe some other series? and what ICS are you flashing? Austria Open (XXLQ1)?
what odin version you used? odin3 v.1.85?
is it any possibility the HC or ICS stock ROM is broken?
what CWM version do you use?
can you post the log on odin after flashing back to HC?
Click to expand...
Click to collapse
motosuki said:
have you try flashing to ICS with the pit file? try use this pit file.
use odin3 v.1.85, check re-partition, auto reboot, and f.reset time. put the XXLQ1 ROM on PDA and make sure its on tar.md5 format.
i hope it work.
Click to expand...
Click to collapse
Thanks~~~~
May I ask, in case.... cos, this morning before I went work..
I found that odin cant recognize my tab...even there is a "dingding" sound from computer...(computer recognized it)
if I still cant get my tab recognized by odin....
anything I can do on it??
And actually, is my problem not really that serious now....:crying::crying::crying::crying:

lokfukobe said:
Thanks~~~~
May I ask, in case.... cos, this morning before I went work..
I found that odin cant recognize my tab...even there is a "dingding" sound from computer...(computer recognized it)
if I still cant get my tab recognized by odin....
anything I can do on it??
And actually, is my problem not really that serious now....:crying::crying::crying::crying:
Click to expand...
Click to collapse
maybe you just need to re-install samsung kies to get the driver back. don't forget to restart your pc.

motosuki said:
maybe you just need to re-install samsung kies to get the driver back. don't forget to restart your pc.
Click to expand...
Click to collapse
Thank you so much~~~
Your reply gives me so much confidence, and so comforting~~~ :good::good:
Will update as soon as I try tonight~~thank you~~

Help... it keeps rebooting

My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...

Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
Help please...
Click to expand...
Click to collapse
refer to this thread http://forum.xda-developers.com/showthread.php?t=1894737 the first guide on how to upgrade to GB. Not saying ur in FROYO but it has the same step. Follow carefully

just did all steps in the guide with JPKPH not XXPQ... but still rebooting...

Arabi3d said:
just did all steps in the guide with JPKPH not XXPQ... but still rebooting...
Click to expand...
Click to collapse
Your phone has corrupted NAND memory probably.

chriz74 said:
Your phone has corrupted NAND memory probably.
Click to expand...
Click to collapse
How to fix it???
I flashed a MIUI and it worked perfectly... but when i enter Recovery mode and make mount and storage\ format dbdata it shows error...
also if i restore my stock rom JXKP3 or flash a new stock rom it keeps reboot again and the Factory Reset doesn't work....
please if anybody knows a solution please tell me...

Flash xxkpe then ddlf2
sent from Samsung galaxy S i9003 Remics JB v3

Send to the samsung service.. It's hardware problem..
Sent from my GT-I9003 using Tapatalk 2

Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...
Click to expand...
Click to collapse
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash

chongns said:
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash
Click to expand...
Click to collapse
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???

Arabi3d said:
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???
Click to expand...
Click to collapse
this problem are not so technical. so i request you to search the forum.
hits. search for arabic patch.
Sent from my Galaxy Nexus using Tapatalk 2

[Q] [HELP!!!] Bricked GT-N8000

Hello,
I'm not new to the forums and I'm not new to bricking devices but I'm new to bricking GT-N8000 and this time i think i lost my efs and did not backup..
what i did wrong simply is i don't know how but i managed to flash 10.1 the TABLET instead of note and it didn't read any signal so when i figured out later what i did i downloaded a rom and tried to install hoping everything will be okay which it didn't.. downloaded a firmware from samfirmware which was one md5 file and since then i'm stuck with the opening window "Samsung Galaxy Note 10.1", so now i figured what i need is to flash EFS img, right now i have installed cwm and custom rom but when it loads it get stuck on Samsung logo.
i also factory reset after that i tried to format the sdcard which is the internal storage, and i think i might have format something called pre-load folder also the cache partition which i suspected due to my limited newbie thinking thought it might help
I'm not sure what should i do and i been looking everywhere for almost 7 hours now and still got nothing, Please Help.
i tried to flash the original firmware not that it came with because it came from china but the UAE one, and when i do it get stuck on the opening logo unlike the custom firmware that gets stuck on Samsung logo, and when i try to access the recovery mode i get this down there in the logo:
E: Failed to mount /efs (Invalid argument)
E: Failed to mount /efs (Invalid argument)
#Manual Mode#
--Applying Multi-CSC...
Applied CSC-Code : unknown
Successfully applied multi-CSC
E: Failed to mount /efs (Invalid argument)
E:can't mount /efs/log/boot_cause
E:can't open /efs/log/boot_cause
anyone can shed some light on what i might need to do

would somebody please help me
would somebody please help me, i don't know where else to go, i came here because this is like the mother of all developers im lost

can you get into ODIN mode?

yes
jaydubbbbs said:
can you get into ODIN mode?
Click to expand...
Click to collapse
yes i can get into download mode and i already used it to flash the original pda so with the cwm

Okay, lets take it a step at a time. Can you boot into recovery? IF so, clear the cache, dalvik, and do a factory reset (you will lose data). Then try rebooting the tab.
Also, what happens when you connect up to Odin? Does it show com connected?

i did all that
Riki1kenobi said:
Okay, lets take it a step at a time. Can you boot into recovery? IF so, clear the cache, dalvik, and do a factory reset (you will lose data). Then try rebooting the tab.
Also, what happens when you connect up to Odin? Does it show com connected?
Click to expand...
Click to collapse
i did all that already and i can connect to download mode fine no problem so does my recovery works fine as well,
the problem seems to be that when i installed the tablet rom erased my efs or im not sure what happened exactly but for all i know i need an efs img for n8000 because i didnt back it up and cant find it T_T

Which rom were you on originally, as in region and version? Which telco provider?
Your first post is a bit garbled and hard to read.
Im guessing you bought the tab in china? But you live in UAE?

you're rgith the device originally came from china and it was unlocked so i had to replace it with something else and it wasn't moded used it for over 4 months and then recently i tried to install something else which led to me by mistake install a tablet rom that was installed and there was no signal thats when i noticed, after that i downloaded moded one by revolution and installed it via cwm after that i rebooted and it got stuck at samsung logo then i tried the original one after reboot it got stuck at the first logo that says Samsung Galaxy note 10.1 after that i formated sdcard and preload folder so is cache

Assuming the product is not a fake flashing a stock rom may bring back your EFS folder .
Preference would be for the original rom .
EFS /IMEI is tied to the phone not a folder that can be swapped .
jje

im not sure
JJEgan said:
Assuming the product is not a fake flashing a stock rom may bring back your EFS folder .
Preference would be for the original rom .
EFS /IMEI is tied to the phone not a folder that can be swapped .
jje
Click to expand...
Click to collapse
i'm not sure what you meant, but why would i get that error that efs cannot be mounted and i already tried to flash the original rom, and it was one big file..
im just lost here i don't really know what to do im just assuming.. please advise

http:// http://www.sammobile.com/firmware/
Select N8000 roms in the search box and scroll down to the China rom. Download and install via odin. This will take you back to the stock rom. It should replace your efs folder.

Riki1kenobi said:
http:// http://www.sammobile.com/firmware/
Select N8000 roms in the search box and scroll down to the China rom. Download and install via odin. This will take you back to the stock rom. It should replace your efs folder.
Click to expand...
Click to collapse
im downloading now, but do you think it will work? i mean what different is it from any other rom, isnt all of them the same when it comes to that mattter ?

http://forum.xda-developers.com/showthread.php?t=2016792
have you flashed the China firmware from this thread thru ODIN? not thru CWM?
if it doesn't work, definitely do a wipe and reflash

downloading, but
jaydubbbbs said:
http://forum.xda-developers.com/showthread.php?t=2016792
have you flashed the China firmware from this thread thru ODIN? not thru CWM?
if it doesn't work, definitely do a wipe and reflash
Click to expand...
Click to collapse
im downloading it from samfirmware but do you really think that the original firmware could replace an efs mount error? i thought th efs wasn't replaceable and about the phone unit so is the IMEI,
also if anyone could or have already seen N8000 Pit file ever please advise where to get it because i've searched the internet all over for it with no use

On the OG tab 7 the efs was replaced by flashing to region specific stock. Would imagine it would be same here. You just lose ALL data in the process.

i have a friend who sent me EFS but when i tried to install it from recovery but it aborts, any ideas on how to get it there or if i have to unizp it and install one of the md5 files or one of bin inside like nv_data,
also please if you could help me locate the pit file for n8000 which doesn't exist i'd be grateful

dieselz said:
i have a friend who sent me EFS but when i tried to install it from recovery but it aborts, any ideas on how to get it there or if i have to unizp it and install one of the md5 files or one of bin inside like nv_data,
also please if you could help me locate the pit file for n8000 which doesn't exist i'd be grateful
Click to expand...
Click to collapse
From what I remember its not a flashable file. It needs to be copied and pasted via a file explorer.

is there a way?
is there a way to do that in cwm?
and what about that pit file, have you seen it or came across it before?

what happened when you used ODIN to flash a whole new firmware?

dieselz said:
is there a way to do that in cwm?
and what about that pit file, have you seen it or came across it before?
Click to expand...
Click to collapse
Not that I know of. You need r/w permissions (root access) and from the tab you need to use a file explorer to replace the efs folder with the new one. I doubt your friends efs data would help anyway, the imei is unique to each device.
The pit file contains the partition information for the device. Unless you have messed with it (unlikely as it is hard to mess with) then I wouldn't worry about the pit file.
Did you try flashing the china rom from samfirmware yet?

Bricked phone,

I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
E:failed to mount /data (No such file or directory)
E: failed to mount /sdcard (File exists)
E: copy_cache _media: Can't mount /sdcard
your storage not prepared yet,p lese use UI menu for format and reboot actions
Click to expand...
Click to collapse
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...

jutopa said:
I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...
Click to expand...
Click to collapse
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...

deDante said:
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...
Click to expand...
Click to collapse
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same

jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
Froyo has diferent bootloader than gb,ics,jb and kk. Try to flash only pit pull battery and then flash full ddlf2 with all files except pit. Good luck.

jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...

deDante said:
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...
Click to expand...
Click to collapse
Didn't work. Pretty sure that internal sd is broken.. hardware problem.

jutopa said:
Didn't work. Pretty sure that internal sd is broken.. hardware problem.
Click to expand...
Click to collapse
after flashing you get success Froyo on your device or not???

deDante said:
after flashing you get success Froyo on your device or not???
Click to expand...
Click to collapse
Noup. Reboots into recovery and got error message in recovery (the one I quoted before). After reboot, bootloop in samsung logo.

you got PASS message on odin after you flash froyo???
if PASS message appear you should be got success froyo installing and you can continue to backup you efs..
Sent from my GT-I9003 using XDA Premium 4