Hello,
I'm not new to the forums and I'm not new to bricking devices but I'm new to bricking GT-N8000 and this time i think i lost my efs and did not backup..
what i did wrong simply is i don't know how but i managed to flash 10.1 the TABLET instead of note and it didn't read any signal so when i figured out later what i did i downloaded a rom and tried to install hoping everything will be okay which it didn't.. downloaded a firmware from samfirmware which was one md5 file and since then i'm stuck with the opening window "Samsung Galaxy Note 10.1", so now i figured what i need is to flash EFS img, right now i have installed cwm and custom rom but when it loads it get stuck on Samsung logo.
i also factory reset after that i tried to format the sdcard which is the internal storage, and i think i might have format something called pre-load folder also the cache partition which i suspected due to my limited newbie thinking thought it might help
I'm not sure what should i do and i been looking everywhere for almost 7 hours now and still got nothing, Please Help.
i tried to flash the original firmware not that it came with because it came from china but the UAE one, and when i do it get stuck on the opening logo unlike the custom firmware that gets stuck on Samsung logo, and when i try to access the recovery mode i get this down there in the logo:
E: Failed to mount /efs (Invalid argument)
E: Failed to mount /efs (Invalid argument)
#Manual Mode#
--Applying Multi-CSC...
Applied CSC-Code : unknown
Successfully applied multi-CSC
E: Failed to mount /efs (Invalid argument)
E:can't mount /efs/log/boot_cause
E:can't open /efs/log/boot_cause
anyone can shed some light on what i might need to do
would somebody please help me
would somebody please help me, i don't know where else to go, i came here because this is like the mother of all developers im lost
can you get into ODIN mode?
yes
jaydubbbbs said:
can you get into ODIN mode?
Click to expand...
Click to collapse
yes i can get into download mode and i already used it to flash the original pda so with the cwm
Okay, lets take it a step at a time. Can you boot into recovery? IF so, clear the cache, dalvik, and do a factory reset (you will lose data). Then try rebooting the tab.
Also, what happens when you connect up to Odin? Does it show com connected?
i did all that
Riki1kenobi said:
Okay, lets take it a step at a time. Can you boot into recovery? IF so, clear the cache, dalvik, and do a factory reset (you will lose data). Then try rebooting the tab.
Also, what happens when you connect up to Odin? Does it show com connected?
Click to expand...
Click to collapse
i did all that already and i can connect to download mode fine no problem so does my recovery works fine as well,
the problem seems to be that when i installed the tablet rom erased my efs or im not sure what happened exactly but for all i know i need an efs img for n8000 because i didnt back it up and cant find it T_T
Which rom were you on originally, as in region and version? Which telco provider?
Your first post is a bit garbled and hard to read.
Im guessing you bought the tab in china? But you live in UAE?
you're rgith the device originally came from china and it was unlocked so i had to replace it with something else and it wasn't moded used it for over 4 months and then recently i tried to install something else which led to me by mistake install a tablet rom that was installed and there was no signal thats when i noticed, after that i downloaded moded one by revolution and installed it via cwm after that i rebooted and it got stuck at samsung logo then i tried the original one after reboot it got stuck at the first logo that says Samsung Galaxy note 10.1 after that i formated sdcard and preload folder so is cache
Assuming the product is not a fake flashing a stock rom may bring back your EFS folder .
Preference would be for the original rom .
EFS /IMEI is tied to the phone not a folder that can be swapped .
jje
im not sure
JJEgan said:
Assuming the product is not a fake flashing a stock rom may bring back your EFS folder .
Preference would be for the original rom .
EFS /IMEI is tied to the phone not a folder that can be swapped .
jje
Click to expand...
Click to collapse
i'm not sure what you meant, but why would i get that error that efs cannot be mounted and i already tried to flash the original rom, and it was one big file..
im just lost here i don't really know what to do im just assuming.. please advise
http:// http://www.sammobile.com/firmware/
Select N8000 roms in the search box and scroll down to the China rom. Download and install via odin. This will take you back to the stock rom. It should replace your efs folder.
Riki1kenobi said:
http:// http://www.sammobile.com/firmware/
Select N8000 roms in the search box and scroll down to the China rom. Download and install via odin. This will take you back to the stock rom. It should replace your efs folder.
Click to expand...
Click to collapse
im downloading now, but do you think it will work? i mean what different is it from any other rom, isnt all of them the same when it comes to that mattter ?
http://forum.xda-developers.com/showthread.php?t=2016792
have you flashed the China firmware from this thread thru ODIN? not thru CWM?
if it doesn't work, definitely do a wipe and reflash
downloading, but
jaydubbbbs said:
http://forum.xda-developers.com/showthread.php?t=2016792
have you flashed the China firmware from this thread thru ODIN? not thru CWM?
if it doesn't work, definitely do a wipe and reflash
Click to expand...
Click to collapse
im downloading it from samfirmware but do you really think that the original firmware could replace an efs mount error? i thought th efs wasn't replaceable and about the phone unit so is the IMEI,
also if anyone could or have already seen N8000 Pit file ever please advise where to get it because i've searched the internet all over for it with no use
On the OG tab 7 the efs was replaced by flashing to region specific stock. Would imagine it would be same here. You just lose ALL data in the process.
i have a friend who sent me EFS but when i tried to install it from recovery but it aborts, any ideas on how to get it there or if i have to unizp it and install one of the md5 files or one of bin inside like nv_data,
also please if you could help me locate the pit file for n8000 which doesn't exist i'd be grateful
dieselz said:
i have a friend who sent me EFS but when i tried to install it from recovery but it aborts, any ideas on how to get it there or if i have to unizp it and install one of the md5 files or one of bin inside like nv_data,
also please if you could help me locate the pit file for n8000 which doesn't exist i'd be grateful
Click to expand...
Click to collapse
From what I remember its not a flashable file. It needs to be copied and pasted via a file explorer.
is there a way?
is there a way to do that in cwm?
and what about that pit file, have you seen it or came across it before?
what happened when you used ODIN to flash a whole new firmware?
dieselz said:
is there a way to do that in cwm?
and what about that pit file, have you seen it or came across it before?
Click to expand...
Click to collapse
Not that I know of. You need r/w permissions (root access) and from the tab you need to use a file explorer to replace the efs folder with the new one. I doubt your friends efs data would help anyway, the imei is unique to each device.
The pit file contains the partition information for the device. Unless you have messed with it (unlikely as it is hard to mess with) then I wouldn't worry about the pit file.
Did you try flashing the china rom from samfirmware yet?
Related
Based on Latest firmware version : PDA:LI8 / PHONE:LI2 / CSC:LI6 (TGY)
Just like ausdim's deodex package, this is not a full ROM, it will install and replace only your system/app and system/framework folders so please make sure you are on the above stated firmware before continuing.
Tested on my ZHALI8 based GT-I9305 (TGY Hong Kong unit).
You need to have CWM Recovery installed.
Link:
http://d-h.st/users/kazuni/?fld_id=6292#files
Shoutout to ausdim's zipalign and deodex script, props bro!
Hi is that able to use on my ZHALI7 (HK Device) ?
Yes, it is.
Sent from my GT-I9305
kazuni said:
Yes, it is.
Sent from my GT-I9305
Click to expand...
Click to collapse
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot
asiafalcon said:
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot
Click to expand...
Click to collapse
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.
kazuni said:
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.
Click to expand...
Click to collapse
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。
Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?
bonglau0429 said:
Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?
Click to expand...
Click to collapse
You can use this package on ZHALI7, however it will not update your modem/csc/boot to ZHALI8. I don't think it's a major problem though, as it is just a software package modification and it should work properly.
asiafalcon said:
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。
Click to expand...
Click to collapse
Please send me private message, thanks
Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?
slotmachine88 said:
Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?
Click to expand...
Click to collapse
I'll state carefully and again, do not ever re-partition the device UNLESS 1) you have a backup EFS copy and 2) you are sure that the partition PIT file you are using is for i9305/T AND your specific model (16/32/64 gb), and nothing else.
I'll also re-elaborate my steps - after you have first flashed the Odin rom , make sure you install the CWM through odin AFTER at least two reboots. 3e will be gone once you do so.
Re: Kazumi
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?
slotmachine88 said:
Re: Kazumni
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?
Click to expand...
Click to collapse
should be, unless the device's NV data area (IMEI) is corrupted. Otherwise, I would suggest you to reflash the official rom first and check whether your device has a signal or not.
Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?
eric-filth said:
Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?
Click to expand...
Click to collapse
where from did u download firmware does it support odin
download from here http://forum.xda-developers.com/showthread.php?t=1704668
and carefully follow the instructions
after unzipping if it is one file dont forget to go to cwm and wipe data,cache partition,dalvick cache factory reset
if it contain three or more files then do the following
In Odin click the PDA button and select the PLATFORM file, click the CSC button and select the CSC file and finally click the BOOTLOADER button and select the BOOTLOADER file
eric-filth said:
Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?
Click to expand...
Click to collapse
Can you get back in to Download mode and install a custom recovery? If so, try that, then use the recovery to flash your ROM.
muddasir121 said:
where from did u download firmware does it support odin
download from here http://forum.xda-developers.com/showthread.php?t=1704668
and carefully follow the instructions
after unzipping if it is one file dont forget to go to cwm and wipe data,cache partition,dalvick cache factory reset
if it contain three or more files then do the following
In Odin click the PDA button and select the PLATFORM file, click the CSC button and select the CSC file and finally click the BOOTLOADER button and select the BOOTLOADER file
Click to expand...
Click to collapse
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
bill.weckel said:
Can you get back in to Download mode and install a custom recovery? If so, try that, then use the recovery to flash your ROM.
Click to expand...
Click to collapse
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?
eric-filth said:
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?
Click to expand...
Click to collapse
You stated in the OP that you had a 32 GB, so you'll need a 32 GB .PIT. However, I don't believe that is your problem as a .PIT defines the partition table layout on the device. That should not have been changed at all. I'd try redownloading the ROM you want and try again, or I'd choose another ROM. Also, are you 100% sure that the ROM you are using is compatible with your tablet?
eric-filth said:
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?
Click to expand...
Click to collapse
cwm recovery has an option to mount sd card did u try that. did u try with kies
bill.weckel said:
You stated in the OP that you had a 16 GB, so you'll need the 16 GB .PIT. However, I don't believe that is your problem as a .PIT defines the partition table layout on the device. That should not have been changed at all. I'd try redownloading the ROM you want and try again, or I'd choose another ROM. Also, are you 100% sure that the ROM you are using is compatible with your tablet?
Click to expand...
Click to collapse
The firmware is P5110XXCLK7_P5110OXACLK7_HOME
Now, i tried only for test flash CWM "GT-P5110_ClockworkMod-Recovery_6.0.1.0.tar" via ODIN and i got this error
Fail to download [8|SOS] [Data:2840(.0) > Part:2560(/2560)] (2kb unit)
Tegra_Nand_Write: Error to DownloadPartition_odin![err:0xfffffffff]
Ow my god im very sad.
I change firmware all my life with S2 and S3 and now this tab 2 give me this?
muddasir121 said:
cwm recovery has an option to mount sd card did u try that
Click to expand...
Click to collapse
Mine not, only mount system, efs, preload, data
remove SD card from tab, put it in another phone or card reader to transfer ROM and flash
nasty007 said:
remove SD card from tab, put it in another phone or card reader to transfer ROM and flash
Click to expand...
Click to collapse
He can't mount his external sdcard with the recovery he's using.
Might be a good idea to switch recoveries first
nasty007 said:
remove SD card from tab, put it in another phone or card reader to transfer ROM and flash
Click to expand...
Click to collapse
But CWM installed in my TAB is 5.5.0.4 and dont have option to install from external sd, only internal,
eric-filth said:
But CWM installed in my TAB is 5.5.0.4 and dont have option to install from external sd, only internal,
Click to expand...
Click to collapse
does it say mount to preload i think may be it is alternnative of internal sd
bill.weckel said:
He can't mount his external sdcard with the recovery he's using.
Might be a good idea to switch recoveries first
Click to expand...
Click to collapse
I tried now put TWRP and same error
Fail to download [8|SOS] [Data:2840(.0) > Part:2560(/2560)] (2kb unit)
Tegra_Nand_Write: Error to DownloadPartition_odin![err:0xfffffffff]
TAB 2 have bootloader locked? Or i saying bull****?
Looking the message of error with my little knowlodge saying the problem is partitions are changed and he cannot write correctly
muddasir121 said:
does it say mount to preload i think may be it is alternnative of internal sd
Click to expand...
Click to collapse
Doesn't work too.
I cant believe this.
Download working, CWM Working and i cant do nothing to repair my tab.
A little smile might help dude. Frustration is always an obstacle.
Checklist
- is your md5 file correct for your unit?
- is your md5 file not corrupted.
- permission in recovery set?
- cable, pc and tab identifies each other?
- try it step by step
- try different correct pit and md5 download.
Sent from my GT-P3100 using xda premium
I tried diffrent firmware (default when i buyed the Tab) and a have error too. Said the cache partition is to small
So i tried 2 differents .pit files and the errors are:
Im believe what Mobile Odin ****ed all my partitions (cache, system......) Impressive
Hit up chainfire.
sent from MY BAD A$$ ET4G
Download Modus is working.
007tiger said:
Download Modus is working.
Click to expand...
Click to collapse
Flash stock rom via Odin .
jje
JJEgan said:
Flash stock rom via Odin .
jje
Click to expand...
Click to collapse
Not working with
N8000-Stock-Recovery
N8000-CWM-6.0.2.8-Darkman
N8000XXALH2
P5100XXBLH4
N8000XXCMA5_N8000OXACMA5_DBT
007tiger said:
Not working with
N8000-Stock-Recovery
N8000-CWM-6.0.2.8-Darkman
N8000XXALH2
P5100XXBLH4
N8000XXCMA5_N8000OXACMA5_DBT
Click to expand...
Click to collapse
Service centre is your only route now .
Probable wrong firmware flashed judged by your post .
jje
jje
JJEgan said:
Service centre is your only route now .
Probable wrong firmware flashed judged by your post .
jje
jje
Click to expand...
Click to collapse
How can i format the internal card back to normal?
so you can flash thru ODIN, but no recovery, huh, so a wipe and factory reset is not possible, I take it does KIES recognize it?
jaydubbbbs said:
so you can flash thru ODIN, but no recovery, huh, so a wipe and factory reset is not possible, I take it does KIES recognize it?
Click to expand...
Click to collapse
Kies tells me my device does not support initialization
Have you try highonandroid recovery?
Flash it via odin
Enter recovery and wipe data...
It work for me yesterday
correct me if I'm wrong
try flashing TWPR
or try to flash factory firmware via odin
Have the same Problem. I've tried to flash stock firmware and recovery and twrp and cwm tha flashing works fine but the recovery is not work.
I think the partition is bad. how can I fix it??
sammyus said:
Have the same Problem. I've tried to flash stock firmware and recovery and twrp and cwm tha flashing works fine but the recovery is not work.
I think the partition is bad. how can I fix it??
Click to expand...
Click to collapse
Did you try to flash just the stock recovery with oden?
The file would be n8000_stockrecovery.tar
Also did you uncheck auto restart in oden and restart with the power button?
kkretch said:
Did you try to flash just the stock recovery with oden?
The file would be n8000_stockrecovery.tar
Also did you uncheck auto restart in oden and restart with the power button?
Click to expand...
Click to collapse
Yes of course I tried all the recoveries stock, twrp, cwm without autoreboot.... it doesn't help....
I think a firmware with PIT file would be helpful but it doesn't exist one.... right?
cenary sweille
Can anyone make this:
http://forum.xda-developers.com/showthread.php?t=960946
So I can maybe restore my Note...
It's a 16GB one...
I sadly find myself in this exact same position. My GT-N8000 was unrooted (though it had been rooted previously via framaroot) and working fine. A few days ago I tried to boot up in the morning, but the screen remained black Figuring that it just needed charging I set it to charge, then tried to start it again a few minutes later. It reached the glaxy Note 10.1 screen and never changed.
Over the last few days I have tried flashing CWM, TWRP and Strock recovery but with no joy. The tablet will boot into Doenload mode for ODIN but will never get to recovery mode.
Via ODIN, I have flashed the stock firmware, but still no change. I even tried repartitioning by flashing 4.04 Android firmware and the corresponding Pit file (found on these forums) but still no change.
Anybody have any idea what might have happened or how it might be fixed? Thanks so much if anyone can help me
bump....any suggestions would be so appreciated!
Same problem : (
I've taken my device to the maintenance center and they figured the problem out as a chip problem and the solution was to change the board with about half the device price .. Went to another maintenance center said that there is no solution else the chip
my regards
Same here
Even my note went through this problem. So, after sending it to the service center they say that the whole motherboard has to be changed.
Where I think that it can be solved by flashing correct \efs as I think \efs partition is corrupt...
deeoc said:
Even my note went through this problem. So, after sending it to the service center they say that the whole motherboard has to be changed.
Where I think that it can be solved by flashing correct \efs as I think \efs partition is corrupt...
Click to expand...
Click to collapse
Hi there, did come right as I have the exact same problem...
EFS simply restore your backed up EFS folder .
I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
E:failed to mount /data (No such file or directory)
E: failed to mount /sdcard (File exists)
E: copy_cache _media: Can't mount /sdcard
your storage not prepared yet,p lese use UI menu for format and reboot actions
Click to expand...
Click to collapse
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...
jutopa said:
I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...
Click to expand...
Click to collapse
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...
deDante said:
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...
Click to expand...
Click to collapse
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
Froyo has diferent bootloader than gb,ics,jb and kk. Try to flash only pit pull battery and then flash full ddlf2 with all files except pit. Good luck.
jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...
deDante said:
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...
Click to expand...
Click to collapse
Didn't work. Pretty sure that internal sd is broken.. hardware problem.
jutopa said:
Didn't work. Pretty sure that internal sd is broken.. hardware problem.
Click to expand...
Click to collapse
after flashing you get success Froyo on your device or not???
deDante said:
after flashing you get success Froyo on your device or not???
Click to expand...
Click to collapse
Noup. Reboots into recovery and got error message in recovery (the one I quoted before). After reboot, bootloop in samsung logo.
you got PASS message on odin after you flash froyo???
if PASS message appear you should be got success froyo installing and you can continue to backup you efs..
Sent from my GT-I9003 using XDA Premium 4
Hi there,
I have a Samsung Galaxy Note 10.1 WIFI (GT-N8010). I had it rooted, custom ROM on it.....frequently forced closes so i decided to cleensweep the thing. Went into TWRP....did factory reset (wipe cache, Dalvik and System) and then formatted DATA.
So no OS anymore.
Then when i wanted to flash the custom ROM (from external SD like i always do) again.....it got stuck.......couldnt flash it it said. Okay.....so.....now what i thought. I tried the procedure of flashing with the galaxy Toolkit. Doesnt work because it waits for "debug enable"....but there is no OS.....so cant do that.
Then i made the biggest mistake i guess.
I flashed new firmware through ODIN.....but accidently for the GT-N8000. Strange that the procedure went well.
Then it came: the device got stuck on the Samsung logo.....no bootloop....just the logo. When i restarted the tablet it went strait to download mode (power and vol - normally) I dont even get the choice of cancelling or continue to download mode. The screen looks like this:
ODIN MODE
product name: gt-n8000
current binary: samsung official
system status: custom
(and then in gray) RP SWREV: A2
And NO custom binary download: no
When i go into recovery mode (power and vol+) it goes strait to the android with "downloading, do not turn off device"
WHAT HAPPENED ????
And does somebody know what to do PRETTY PLEASE
Hope you guys know what to do....or is it bricked ????
PS. It's still seen by Odin !
Greetz from the netherlands
I had the same problem as you, and I had to flash via Odin v3.09 a firmware 4.4.2 and it rebooted fine.
crombull said:
I had the same problem as you, and I had to flash via Odin v3.09 a firmware 4.4.2 and it rebooted fine.
Click to expand...
Click to collapse
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
Thnx for the reply
PassieWater said:
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
Thnx for the reply
Click to expand...
Click to collapse
I have a similar problem and can't flash original firmware via odin. could you send me the pit file you have used?
Thanks in advance!
I just sent you the pit file through mail
Hope it helps
Bricked since updated to KitKat - Odin flashes fail!!
PassieWater said:
I just sent you the pit file through mail
Hope it helps
Click to expand...
Click to collapse
Could I please have a secure PIT file for the GT-N8010 16GB bought in France? I've bricked my Note 10.1 after updating to the official Kitkat (N8010XXUDNE4_N8010OXXDNF1_HOME.tar.md5). I did a wipe data and cache and all seemed to be working fine for 2 days... but the tablet got stuck on a game and after a force close has been stuck in a bootloop with no access to recovery mode. I do manage to get into download mode and have tried to flash a number of times with different roms (going back seems to be impossible with KitKat) but to no avail as I keep getting an issue about 'no PIT partition'. I took it to a shop (as my warranty ran out a month ago - lucky me!) and they were also unable to flash the tablet so the issue does not seem to be the cable or the drivers (as Odin recognizes the tablet). I tried flashing with a PIT file (ticking re-partition with and without the kitkat rom) that I got on some website but I'm not certain it is the right one for my GT-N8010 and it also fails. Before I try a Nand erase I want to make sure that I have the right PIT file. By the way does the PIT file you have work with KitKat as the one I found seems to be for an outdated version of Android and as Kitkat doesn't enable one to go back to an older version of Android I'm in a catch 22 with only the Nand erase option left?
FYI, I tried flashing a recovery like TWP to try flashing custom roms but it also doesn't work.
Any other ideas? Should I tick Nand Erase and Phone EFS Clear. As the issue seems to be the kitkat bootloader is it possible to flash a bootloader? Can't find any trace of anything other than the tar files for GT-N8010 in Jelly Bean or KitKat. Anybody have a bootloader, PDA, CSC and Phone file for the GT-N8010? Can one attempt the following on a GT-N8010: http://forum.xda-developers.com/showthread.php?t=2610757&page=2 ?
Thanks for any help as I've been without my tablet for weeks now!!:crying:
Need PIT file for GT-N8010 16GB under Kitkat
Any PIT file please? Thanks!
Same problem here
PassieWater said:
I just sent you the pit file through mail
Hope it helps
Click to expand...
Click to collapse
can you send me that pit file too, please?
Me too!
I'd like that file too...
I just flashed the wrong bootloader file onto my N8010. Luckily it's still working!
Still looking for the correct KitKat bootloader, but I'd happily take the pit file and see if that works.
Pretty Please!
PassieWater said:
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
I have the same problem... flashed 4.4.2 on a North American Galaxy Note 10.1 (2012) with Odin and am stuck in downloading mode.
Can someone send me the pit file I require? Please!
Click to expand...
Click to collapse
Lucky me! Flashing the wrong bootloader probably didn't work. I was able to flash a stock KitKat rom yesterday and my device still seems to have a working pit file.
Details: German Note 10.1 GT N8010 updated to KitKat, but the pit file seems to be older. Any other info needed?
This is how I got the pit file.
Code:
sudo heimdall download-pit --output Samsung-Note-10.1-PIT.txt
I had trouble opening the result in a text editor, so I'm not sure, I got it right. You'll probably have to rename it... Let's see, if I'm allowed to upload.
mendacium said:
Lucky me! Flashing the wrong bootloader probably didn't work. I was able to flash a stock KitKat rom yesterday and my device still seems to have a working pit file.
Details: German Note 10.1 GT N8010 updated to KitKat, but the pit file seems to be older. Any other info needed?
This is how I got the pit file.
Code:
sudo heimdall download-pit --output Samsung-Note-10.1-PIT.txt
I had trouble opening the result in a text editor, so I'm not sure, I got it right. You'll probably have to rename it... Let's see, if I'm allowed to upload.
Click to expand...
Click to collapse
Thanks... Any idea what the name of the original PIT file is?
(I believe it should have the .pit extension. I hope I can rename this file accordingly?)
Sorry, no.
Heimdall doesn't seem to care how the file is named. I'd hazard a guess, that it's similar for most Samsung devices.
help please. .
Hi
Any chance of sending me the PIT file. . I did the same! :'(
Thanks in advance .
.