Download Modus is working.
007tiger said:
Download Modus is working.
Click to expand...
Click to collapse
Flash stock rom via Odin .
jje
JJEgan said:
Flash stock rom via Odin .
jje
Click to expand...
Click to collapse
Not working with
N8000-Stock-Recovery
N8000-CWM-6.0.2.8-Darkman
N8000XXALH2
P5100XXBLH4
N8000XXCMA5_N8000OXACMA5_DBT
007tiger said:
Not working with
N8000-Stock-Recovery
N8000-CWM-6.0.2.8-Darkman
N8000XXALH2
P5100XXBLH4
N8000XXCMA5_N8000OXACMA5_DBT
Click to expand...
Click to collapse
Service centre is your only route now .
Probable wrong firmware flashed judged by your post .
jje
jje
JJEgan said:
Service centre is your only route now .
Probable wrong firmware flashed judged by your post .
jje
jje
Click to expand...
Click to collapse
How can i format the internal card back to normal?
so you can flash thru ODIN, but no recovery, huh, so a wipe and factory reset is not possible, I take it does KIES recognize it?
jaydubbbbs said:
so you can flash thru ODIN, but no recovery, huh, so a wipe and factory reset is not possible, I take it does KIES recognize it?
Click to expand...
Click to collapse
Kies tells me my device does not support initialization
Have you try highonandroid recovery?
Flash it via odin
Enter recovery and wipe data...
It work for me yesterday
correct me if I'm wrong
try flashing TWPR
or try to flash factory firmware via odin
Have the same Problem. I've tried to flash stock firmware and recovery and twrp and cwm tha flashing works fine but the recovery is not work.
I think the partition is bad. how can I fix it??
sammyus said:
Have the same Problem. I've tried to flash stock firmware and recovery and twrp and cwm tha flashing works fine but the recovery is not work.
I think the partition is bad. how can I fix it??
Click to expand...
Click to collapse
Did you try to flash just the stock recovery with oden?
The file would be n8000_stockrecovery.tar
Also did you uncheck auto restart in oden and restart with the power button?
kkretch said:
Did you try to flash just the stock recovery with oden?
The file would be n8000_stockrecovery.tar
Also did you uncheck auto restart in oden and restart with the power button?
Click to expand...
Click to collapse
Yes of course I tried all the recoveries stock, twrp, cwm without autoreboot.... it doesn't help....
I think a firmware with PIT file would be helpful but it doesn't exist one.... right?
cenary sweille
Can anyone make this:
http://forum.xda-developers.com/showthread.php?t=960946
So I can maybe restore my Note...
It's a 16GB one...
I sadly find myself in this exact same position. My GT-N8000 was unrooted (though it had been rooted previously via framaroot) and working fine. A few days ago I tried to boot up in the morning, but the screen remained black Figuring that it just needed charging I set it to charge, then tried to start it again a few minutes later. It reached the glaxy Note 10.1 screen and never changed.
Over the last few days I have tried flashing CWM, TWRP and Strock recovery but with no joy. The tablet will boot into Doenload mode for ODIN but will never get to recovery mode.
Via ODIN, I have flashed the stock firmware, but still no change. I even tried repartitioning by flashing 4.04 Android firmware and the corresponding Pit file (found on these forums) but still no change.
Anybody have any idea what might have happened or how it might be fixed? Thanks so much if anyone can help me
bump....any suggestions would be so appreciated!
Same problem : (
I've taken my device to the maintenance center and they figured the problem out as a chip problem and the solution was to change the board with about half the device price .. Went to another maintenance center said that there is no solution else the chip
my regards
Same here
Even my note went through this problem. So, after sending it to the service center they say that the whole motherboard has to be changed.
Where I think that it can be solved by flashing correct \efs as I think \efs partition is corrupt...
deeoc said:
Even my note went through this problem. So, after sending it to the service center they say that the whole motherboard has to be changed.
Where I think that it can be solved by flashing correct \efs as I think \efs partition is corrupt...
Click to expand...
Click to collapse
Hi there, did come right as I have the exact same problem...
EFS simply restore your backed up EFS folder .
Related
I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
really sorry mate - but i think you've hard bricked the thing..
http://forum.xda-developers.com/showthread.php?t=1807002
this could be your issue..
omg...i thought it is soft bricked as i still able to access into download mode ~>.<~
Verifies that the firmware package that you downloaded is not corrupt, then enters in download mode, flash with ODIN ,if it remains in bootloop enters into recovery and performs wipe date , factory reset, should start ....
dejima said:
I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
Click to expand...
Click to collapse
download stock rom,go to download mode,and flash with odin..after that,full wipe,factory reset.try flash it with new downloaded ics md5 file again.
May i know which firmware is consider a stock rom? i tried few of them from sammobile, but all stuck at factoryfs.img >.<
dejima said:
I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
Click to expand...
Click to collapse
The same to me, maybe superbrick.
Try to download pit file for P6200 and reflash firmware, pit file via Odin.
If not work, send it to SS service for warranty or repartition use pit file, look for at Gnotes, Tab 7.7 box.
Sent from my GT-P6200 using Tapatalk 2
dejima said:
May i know which firmware is consider a stock rom? i tried few of them from sammobile, but all stuck at factoryfs.img >.<
Click to expand...
Click to collapse
everything from sammobile is a stock ROM.
you tried a few?? what was your criteria for choosing them?
wingie6200 said:
everything from sammobile is a stock ROM.
you tried a few?? what was your criteria for choosing them?
Click to expand...
Click to collapse
Those from my region and some randomly picked. I also tried with pit and repartition...well~ no luck too
the worst case just send to service center
dejima said:
Those from my region and some randomly picked. I also tried with pit and repartition...well~ no luck too
the worst case just send to service center
Click to expand...
Click to collapse
I would check here first
http://forum.xda-developers.com/showthread.php?t=1681047
Sent from my myTouch 4g via Tapatalk
ringnutz said:
I would check here first
http://forum.xda-developers.com/showthread.php?t=1681047
Sent from my myTouch 4g via Tapatalk
Click to expand...
Click to collapse
Probably the files on : http://forum.xda-developers.com/showthread.php?t=1681047 are not ok for p6200....... the files in that guide are for p6210 wifi only ( without 3g module like p6200... ). Or not?!?!?!
tellone said:
Probably the files on : http://forum.xda-developers.com/showthread.php?t=1681047 are not ok for p6200....... the files in that guide are for p6210 wifi only ( without 3g module like p6200... ). Or not?!?!?!
Click to expand...
Click to collapse
I would expect that if you would find the files for the 6200 version that it would do the same thing. It's already borked. Is it under warranty
Sent from my myTouch 4g via Tapatalk
Hello All,
My N8020 is now semi brick after trying to flash it back to stock.It was on custom rom before but showing different errors so i decided to change the rom...First i tried to install another custom rom which was cynogenmod 10 but after intstalling this rom from cwm phone stuck at cynogenmod startup logo i waited for long time but still nothing.Then tried different versions of cynogen roms but same...After all this i decided to install a official rom so i flashed this with
N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar
but now the real problem started..Now i can boot phone in download mode but not in recovery mode at all...Then i tried to flash a cwm via odin and get "PASS" messege in odin but still no recovery mode...Tried to flash to flash clockwork recovery several time but nothing changed and then i check in download mode the custom flash counter increase every time i try to flash cwm...then i searched the stock recovery for 8020 but when i try to flash it via odin i always get "FAIL"...
Now i m out of ideas and searching for a real solution....SO can anybody please tell me what to do next to get it back to life???
Regards,
Muneeb
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thanks for reply but can u please tell me from where i get n8020 twrp?i only able to find N8000 to N8013 but cant find for N8020....
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thnx but its still same..did this as per your instructions but tablet still on samsung galaxy note 10.1 logo i have pressed the vol up for long time but nothing...One more thing that one more count added to custom binary download.
Still no luck...
I'm sorry to hear that. I hope you'll find a solution soon.
Sent from my Nexus 5 using Tapatalk
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
MUNEEB_AKHTAR_RAZA said:
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
Click to expand...
Click to collapse
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
KDKobes said:
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
Click to expand...
Click to collapse
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
MUNEEB_AKHTAR_RAZA said:
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
Click to expand...
Click to collapse
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
KDKobes said:
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
Click to expand...
Click to collapse
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
I didn't find a working pit for my n 8010. Don't worry too much about the binary counter, mine was 118 today, I reset it with triangle away. I don't have the balls to do a nand erase on mine, I'm not even sure that is required for my problem, at least mine is working.
Sent from my Nexus 5 using Tapatalk
MUNEEB_AKHTAR_RAZA said:
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
Click to expand...
Click to collapse
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
KDKobes said:
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
Click to expand...
Click to collapse
Never ticked this option yet...So you suggest me to do so?
MUNEEB_AKHTAR_RAZA said:
Never ticked this option yet...So you suggest me to do so?
Click to expand...
Click to collapse
Yes, dont check auto boot though leave that unchecked and if it passes reboot to recovery and do a data wipe then reboot. If you run into error add your pit file to the pit window along with your stock tar.md5 file and run it just as I mentioned before with repartition selected
Make sure the pit file you use is for your device model/storage size
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
pilo_kulet said:
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
Click to expand...
Click to collapse
Last post 2014 poster no longer active on the forum .
TWRP and CWM see development threads .
Oddly enough a notification was sent to my email. That's correct though I'm no longer active in this forum.
Here is all I have left on the Galaxy Note 10.1, anything else you need you will have to find.
https://drive.google.com/open?id=0B-BP_JVn6T1Mb1o4UXVUYUpnc0E
Thanks for that .
I PM the mods is probably why you got the message .
Sadly/ logically this forum is nearly dead .
I'm stuck in a boot loop after replacing my build.prop file, I replaced it with my own stock unedited one that I made a back up of with the one I edited with those RAM fixes. That did nothing and made my phone even slower so I used ES explorer and moved my stock file to the system folder and did an overwrite. Now my phone is stuck in a bootloop. I'm rooted not running a custom rom or recovery. Is there any way I can get this working without doing a factory reset? Yes I already tried wiping cache.
EDIT: DID A FACTORY RESET AND WIPED CACHE STILL STUCK IN BOOTLOOP.
st0j said:
I'm stuck in a boot loop after replacing my build.prop file, I replaced it with my own stock unedited one that I made a back up of with the one I edited with those RAM fixes. That did nothing and made my phone even slower so I used ES explorer and moved my stock file to the system folder and did an overwrite. Now my phone is stuck in a bootloop. I'm rooted not running a custom rom or recovery. Is there any way I can get this working without doing a factory reset? Yes I already tried wiping cache.
EDIT: DID A FACTORY RESET AND WIPED CACHE STILL STUCK IN BOOTLOOP.
Click to expand...
Click to collapse
always you have to do a nandroid backup for this case, but if you don't have the only way to fix this problem is flashing de stock firmware.
jah2110 said:
always you have to do a nandroid backup for this case, but if you don't have the only way to fix this problem is flashing de stock firmware.
Click to expand...
Click to collapse
How exactly do I go about doing this as I dont have a custom recovery or anything?
st0j said:
How exactly do I go about doing this as I dont have a custom recovery or anything?
Click to expand...
Click to collapse
only need to put the phone in download mode and flash the stock firmware with Odin.
jah2110 said:
only need to put the phone in download mode and flash the stock firmware with Odin.
Click to expand...
Click to collapse
Would you recommend the original stock firmware or using a custom ROM?
st0j said:
Would you recommend the original stock firmware or using a custom ROM?
Click to expand...
Click to collapse
first you have to get out of that situation, that mean you need a stock firm. Later read tutorials to install a custom rom, because if you have problems modification build.prop installing a custom rom is more harder. Download and install the stock firmware.
jah2110 said:
first you have to get out of that situation, that mean you need a stock firm. Later read tutorials to install a custom rom, because if you have problems modification build.prop installing a custom rom is more harder. Download and install the stock firmware.
Click to expand...
Click to collapse
Agreed. I'm still curious how I managed to put my phone into a bootloop by restoring my own build.prop file.
While using odin to flash firmware my usb connection kept cunning in and out for some reason I dont know why I even installed the updates. And it failed. Now I cant get rid of "An error has occured while updating the device software use emergency........" screen.... Now what.
st0j said:
While using odin to flash firmware my usb connection kept cunning in and out for some reason I dont know why I even installed the updates. And it failed. Now I cant get rid of "An error has occured while updating the device software use emergency........" screen.... Now what.
Click to expand...
Click to collapse
ttry to conect to kies and do a emergency restore.
here you have a video.
http://m.youtube.com/watch?v=UEnm5TU5KMw
I got back into download mode, and now it gives me an error saying it cant open serial(COM) port.
st0j said:
I got back into download mode, and now it gives me an error saying it cant open serial(COM) port.
Click to expand...
Click to collapse
Get into download mode, use odin to flash back the stock firmware.
jah2110 said:
ttry to conect to kies and do a emergency restore.
here you have a video.
http://m.youtube.com/watch?v=UEnm5TU5KMw
Click to expand...
Click to collapse
I got back into download mode, and now it gives me an error saying it cant open serial(COM) port.
Saafir said:
Did you make sure permissions was set correctly after the replacement? ALWAYS check them after moving crucial system files. build.prop should be set at rw-r-r (0644)
Click to expand...
Click to collapse
I got it to work, used another USB cable and odin finished installing it after 20 tries of USB fails.
I've tried everything that i could find using google. Nothing has worked so far.
My friend has a S6 that was on 5.1.1 with root. It didnt received OTA updates so he tried to flash the new Nougat rom using ODIN. Alas the phone softbricked.
I can access download mode, but doesn't matter what firmware i try ODIN always end up failing. It's either sboot.bin, cm.bin so i think it has something to do with the bootloader? I'm not sure.
Tried to use SmartSwitch too but after it downloads the firmware it gives me an error and says to enter safe mode (????) so that's not working either.
Has anyone have an ideia of what to try next?
Thanks in advance.
M3gNa said:
I've tried everything that i could find using google. Nothing has worked so far.
My friend has a S6 that was on 5.1.1 with root. It didnt received OTA updates so he tried to flash the new Nougat rom using ODIN. Alas the phone softbricked.
I can access download mode, but doesn't matter what firmware i try ODIN always end up failing. It's either sboot.bin, cm.bin so i think it has something to do with the bootloader? I'm not sure.
Tried to use SmartSwitch too but after it downloads the firmware it gives me an error and says to enter safe mode (????) so that's not working either.
Has anyone have an ideia of what to try next?
Thanks in advance.
Click to expand...
Click to collapse
Hold down all the buttens on the phone , it should eventually get to download mode , then flash twrp and then flash a rom and see if it boots that way
hairyfred said:
Hold down all the buttens on the phone , it should eventually get to download mode , then flash twrp and then flash a rom and see if it boots that way
Click to expand...
Click to collapse
Already tried. Touchscreen on TWRP is not responsive.
Do you using latest Odin 3.12.7 and newest Samsung USB Drivers and latest right firmware for your model (the best way to get it is SamFirm)?
Softbricked S6, Only Download mode
Hi,
I'm facing the same issue. Tried multiple firmware from sammobile using latest version of odin. I can access only download mode and when not in download it boots till the samsung logo and goes into bootloop. https://imgur.com/a/9bJnM
tarun1188 said:
Hi,
I'm facing the same issue. Tried multiple firmware from sammobile using latest version of odin. I can access only download mode and when not in download it boots till the samsung logo and goes into bootloop. https://imgur.com/a/9bJnM
Click to expand...
Click to collapse
Flash twrp, flash a rom , should let it boot
hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
Touchscreen is not working on TWRP. I'm downloading a Custom ROM and will try to install it trough ADB using TWRP commands. Shot in the dark.
Ended up not working.
Tried PhilZ recovery and I got to flash Global Elite rom but it doesn't boot. Is PhilZ compatible with Nougat roms? What else can I try with this recovery.
hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
I flashed TWRP using odin and got "pass" message. But i cannot access recovering mode. I can access only recovery mode and after flashing with stock rom i get the message as "pass" in odin as always but same bootloop.
tarun1188 said:
I flashed TWRP using odin and got "pass" message. But i cannot access recovering mode. I can access only recovery mode and after flashing with stock rom i get the message as "pass" in odin as always but same bootloop.
Click to expand...
Click to collapse
Download right newest firmware for your model, use SamFirm to get it. Then use Odin 3.12.7 with newest Samsung USB Drivers to full-flash stock ROM. Set also "Factory Reset" in Odin then START. If Odin shows you 'pass' then everything comes good.
rifek4 said:
Download right newest firmware for your model, use SamFirm to get it. Then use Odin 3.12.7 with newest Samsung USB Drivers to full-flash stock ROM. Set also "Factory Reset" in Odin then START. If Odin shows you 'pass' then everything comes good.
Click to expand...
Click to collapse
Done that, No change. What else can i try to make this work ?
tarun1188 said:
Done that, No change. What else can i try to make this work ?
Click to expand...
Click to collapse
Did you for sure used right firmware correctly for your model etc? Look HERE, try like that.
How is/was your reactivation lock? On or off. I had problems with odin when it was ON.
Sent from my SM-G925F using Tapatalk
gmajnkek said:
How is/was your reactivation lock? On or off. I had problems with odin when it was ON.
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
It is OFF. See here => https://imgur.com/a/9bJnM I downloaded the right firmware for model. I'm sure of it now. Used samsung smartswitch to know my csc code using serial number. Still i'm facing the same issue. I'll try flashing it on another pc later today. Also, Should i change any odin setting while flashing ?? Like NAND erase or bootloader update etc
tarun1188 said:
It is OFF. See here => https://imgur.com/a/9bJnM I downloaded the right firmware for model. I'm sure of it now. Used samsung smartswitch to know my csc code using serial number. Still i'm facing the same issue. I'll try flashing it on another pc later today. Also, Should i change any odin setting while flashing ?? Like NAND erase or bootloader update etc
Click to expand...
Click to collapse
Not necessary, just "Factory Reset" and that's it. I don't know why Odin shows you "pass
" and your phone still shows "system status: custom". Looks like Odin didn't flashing correctly.
rifek4 said:
Not necessary, just "Factory Reset" and that's it. I don't know why Odin shows you "pass
" and your phone still shows "system status: custom". Looks like Odin didn't flashing correctly.
Click to expand...
Click to collapse
This was before i flashed using Odin. I tried flashing twrp first and then stock rom. Does this make any difference ?
P.S: I'm not able to access recovery mode, only ODIN is possible.
tarun1188 said:
This was before i flashed using Odin. I tried flashing twrp first and then stock rom. Does this make any difference ?
P.S: I'm not able to access recovery mode, only ODIN is possible.
Click to expand...
Click to collapse
Make photo of bootloader after flashed stock via Odin.
BTW
First TWRP then stock? Why? xD
hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
This.
tarun1188 said:
This.
Click to expand...
Click to collapse
Ok, but why stock? If you flashed TWRP then full-wipe and clean install for example Noble ROM. Try like that...
hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
rifek4 said:
Ok, but why stock? If you flashed TWRP then full-wipe and clean install for example Noble ROM. Try like that...
Click to expand...
Click to collapse
After i flash TWRP, Odin show 'pass' but i'm not able to access recovery mode. vol up + home + power button.
hey all, im new here and i am new to the whole phone fixing thing. my stepmoms galaxy a505w had recently gotten the new android 11 update but after it updated, it completley got stuck in a boot loop on the galaxy A50 boot screen. at first it wasnt even going into recovery mode. only download mode and the boot loop screen. but then i got the stock firmware for it and flashed it with odin 3.13.3 and now i have a recovery mode now. so far nothing has worked. facotry reset? nope. resetting cache? nope. reflashing the stock firmware? also nope. im not sure what to do at this point. i tried going to samsung, but the 1 yr manufacturers warranty is out now. anything helps.
thanks - Muppypup
Muppypup said:
hey all, im new here and i am new to the whole phone fixing thing. my stepmoms galaxy a505w had recently gotten the new android 11 update but after it updated, it completley got stuck in a boot loop on the galaxy A50 boot screen. at first it wasnt even going into recovery mode. only download mode and the boot loop screen. but then i got the stock firmware for it and flashed it with odin 3.13.3 and now i have a recovery mode now. so far nothing has worked. facotry reset? nope. resetting cache? nope. reflashing the stock firmware? also nope. im not sure what to do at this point. i tried going to samsung, but the 1 yr manufacturers warranty is out now. anything helps.
thanks - Muppypup
Click to expand...
Click to collapse
try using odin 3.14.4 an run as admin to flash the stock firmware
ok ill try that. thank you
howdeedodat said:
try using odin 3.14.4 an run as admin to flash the stock firmware
Click to expand...
Click to collapse
ok currently its on the boot screen but it hasnt looped yet. i think that what happens after its reset
howdeedodat said:
try using odin 3.14.4 an run as admin to flash the stock firmware
Click to expand...
Click to collapse
EDIT: it looped unfortunately
Muppypup said:
EDIT: it looped unfortunately
Click to expand...
Click to collapse
sorry if i may ask which region ur firmware are ?
howdeedodat said:
sorry if i may ask which region ur firmware are ?
Click to expand...
Click to collapse
my region is canada in download mode it says my carrier id is XAC
Muppypup said:
my region is canada in download mode it says my carrier id is XAC
Click to expand...
Click to collapse
try flash the A505WVLSBCUB1 with android 10, n used the csc not the home_csc after odin flash success try to go to recovery wipe data n cache, hope it fixed ur phone
howdeedodat said:
try flash the A505WVLSBCUB1 with android 10, n used the csc not the home_csc after odin flash success try to go to recovery wipe data n cache, hope it fixed ur phone
Click to expand...
Click to collapse
ok. its just downloading. slow internet amirite
howdeedodat said:
try flash the A505WVLSBCUB1 with android 10, n used the csc not the home_csc after odin flash success try to go to recovery wipe data n cache, hope it fixed ur phone
Click to expand...
Click to collapse
It didnt work. I got this error message
Muppypup said:
It didnt work. I got this error message
Click to expand...
Click to collapse
before u flash the rom that i recomended which rom u flash into it ?
howdeedodat said:
before u flash the rom that i recomended which rom u flash into it ?
Click to expand...
Click to collapse
i used a different stock ROM