Database Info

[Deodexed & Zipaligned GT-I9305 ZHALI8] for GT-I9305 [ONLINE]

Based on Latest firmware version : PDA:LI8 / PHONE:LI2 / CSC:LI6 (TGY)
Just like ausdim's deodex package, this is not a full ROM, it will install and replace only your system/app and system/framework folders so please make sure you are on the above stated firmware before continuing.
Tested on my ZHALI8 based GT-I9305 (TGY Hong Kong unit).
You need to have CWM Recovery installed.
Link:
http://d-h.st/users/kazuni/?fld_id=6292#files
Shoutout to ausdim's zipalign and deodex script, props bro!

Hi is that able to use on my ZHALI7 (HK Device) ?

Yes, it is.
Sent from my GT-I9305

kazuni said:
Yes, it is.
Sent from my GT-I9305
Click to expand...
Click to collapse
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot

asiafalcon said:
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot
Click to expand...
Click to collapse
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.

kazuni said:
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.
Click to expand...
Click to collapse
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。

Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?

bonglau0429 said:
Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?
Click to expand...
Click to collapse
You can use this package on ZHALI7, however it will not update your modem/csc/boot to ZHALI8. I don't think it's a major problem though, as it is just a software package modification and it should work properly.

asiafalcon said:
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。
Click to expand...
Click to collapse
Please send me private message, thanks

Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?

slotmachine88 said:
Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?
Click to expand...
Click to collapse
I'll state carefully and again, do not ever re-partition the device UNLESS 1) you have a backup EFS copy and 2) you are sure that the partition PIT file you are using is for i9305/T AND your specific model (16/32/64 gb), and nothing else.
I'll also re-elaborate my steps - after you have first flashed the Odin rom , make sure you install the CWM through odin AFTER at least two reboots. 3e will be gone once you do so.

Re: Kazumi
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?

slotmachine88 said:
Re: Kazumni
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?
Click to expand...
Click to collapse
should be, unless the device's NV data area (IMEI) is corrupted. Otherwise, I would suggest you to reflash the official rom first and check whether your device has a signal or not.

P3100 stuck at bootscreen help

Hi,
i was using cm10.1 which was running fine, i reloaded the stock jellybean 4.1.1 and now the tablet wont go beyond the flashing samsung boot screen?
i tried going back to ICS 4.0.4
I loaded these via the odin method, what i need is cwm but the tablet is stuck at the bootscreen, any kind person out there get any ideas what i can do
thanks
gazmon

I got the same problem with u~"~
I didn't flash anything but it stucks at that bootscreen.
I can enter download mode but not cmw also
How can we do....~"~

SAMHUI94 said:
I got the same problem with u~"~
I didn't flash anything but it stucks at that bootscreen.
I can enter download mode but not cmw also
How can we do....~"~
Click to expand...
Click to collapse
Sorted it now
If stuck at bootscreen turn off device, then hold power button and volume up to enter standard android recovery mode, then select clear dalvic and clear cache, reboot and that sorted it

i discovered that i can enter cwm recovery
But i made a full wipe, it still doesn't help.
Do i need to flash in offical rom?? Where can i find hk's rom??
Thx and please help

SAMHUI94 said:
i discovered that i can enter cwm recovery
But i made a full wipe, it still doesn't help.
Do i need to flash in offical rom?? Where can i find hk's rom??
Thx and please help
Click to expand...
Click to collapse
If you still have CWM recovery, then your attempt to ODIN the stock ROM did not work.
What version CWM do you have?
Find the stock ROMs here, but make sure your model is p3100 not P3113 or similar.
http://www.sammobile.com/firmware/?page=3&model=GT-P3113&pcode=0&os=1&type=3#firmware

DigitalMD said:
If you still have CWM recovery, then your attempt to ODIN the stock ROM did not work.
What version CWM do you have?
Find the stock ROMs here, but make sure your model is p3100 not P3113 or similar.
http://www.sammobile.com/firmware/?page=3&model=GT-P3113&pcode=0&os=1&type=3#firmware
Click to expand...
Click to collapse
I didn't use ODIN to recover. I just had a full wipe but it doesn't work.
I am having CWM on V6.0.1.0
Is the following process correct?
Open Odin-> Tablet in download mode-> Connect-> Choose the downloaded zip in PDA column
THX !!!

SAMHUI94 said:
I didn't use ODIN to recover. I just had a full wipe but it doesn't work.
I am having CWM on V6.0.1.0
Is the following process correct?
Open Odin-> Tablet in download mode-> Connect-> Choose the downloaded zip in PDA column
THX !!!
Click to expand...
Click to collapse
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5

DigitalMD said:
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5
Click to expand...
Click to collapse
Thx for your kindly help!
I will do this after i charged my tab2.
Hope I can boot my tab
---------- Post added at 01:42 AM ---------- Previous post was at 12:48 AM ----------
DigitalMD said:
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5
Click to expand...
Click to collapse
I succeed!!! Thx:good:
One more question here
Can I upgrade the android version by using odin with newest firmware?
Thats using 4.1 firmware with the same method I've done.
Sorry for my poor english.

Why can't I find a solid tutorial to unroot my P6210?

Even for the stock firmware. In the Official Firmware thread the only link I get is a download manager. I have downloaded tons of files before and know to avoid all those big download buttons because they are garbage software. But where is my firmware download? What am I doing wrong?

Correct me if I'm wrong anyone, but if I understand correctly if you reflash a stock rom that will unroot you, and is safer/easier than any unroot methods that are out there...

skurys said:
Correct me if I'm wrong anyone, but if I understand correctly if you reflash a stock rom that will unroot you, and is safer/easier than any unroot methods that are out there...
Click to expand...
Click to collapse
Yes it is safer to unroot that way.. other than other methods of unrooting your tab... but why do you want to unroot your tab? Any problems with root?
Sent from my GT-P6200 using XDA Premium HD app

theejay0625 said:
Yes it is safer to unroot that way.. other than other methods of unrooting your tab... but why do you want to unroot your tab? Any problems with root?
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Yet I can't find a copy of the stock ROM.

DanRo80 said:
Even for the stock firmware. In the Official Firmware thread the only link I get is a download manager. I have downloaded tons of files before and know to avoid all those big download buttons because they are garbage software. But where is my firmware download? What am I doing wrong?
Click to expand...
Click to collapse
Try here - http://live.samsung-updates.com/index.php?device=GT-P6210. (US="XAR" region)
You can also choose different models in the select window.

SaurusM3 said:
Try here - http://live.samsung-updates.com/index.php?device=GT-P6210. (US="XAR" region)
You can also choose different models in the select window.
Click to expand...
Click to collapse
It doesn't matter where I place the file it keeps telling me "can't open" and "installation aborted". What am I doing incorrectly?

DanRo80 said:
It doesn't matter where I place the file it keeps telling me "can't open" and "installation aborted". What am I doing incorrectly?
Click to expand...
Click to collapse
Assuming you managed to download the zip file( yes, you can downoad it from that site, just look for the small download buttons )
The .zip file that you download isn't a "update.zip" type file, it's just a normal zip that contains you rom image. You're suppose to extract the .md5 file in the zip and flash it with Odin.
What works for me:
- Start Odin 3.07 : http://samsung-updates.com/Odin307.zip
- Click the PDA button and select the .md5 file, let it process for a while
- Put the tab in Odin mode - Shut down then hold power + vol down key
- Flash the firmware in Odin( Start button )
PS : 10th post for me, Ima gonna go spam the dev forum now MWHAHAHAHAHAH

MichaelIvinov said:
Assuming you managed to download the zip file( yes, you can downoad it from that site, just look for the small download buttons )
The .zip file that you download isn't a "update.zip" type file, it's just a normal zip that contains you rom image. You're suppose to extract the .md5 file in the zip and flash it with Odin.
What works for me:
- Start Odin 3.07 : http://samsung-updates.com/Odin307.zip
- Click the PDA button and select the .md5 file, let it process for a while
- Put the tab in Odin mode - Shut down then hold power + vol down key
- Flash the firmware in Odin( Start button )
PS : 10th post for me, Ima gonna go spam the dev forum now MWHAHAHAHAHAH
Click to expand...
Click to collapse
I did it this way and after restarting it is staying on the Samsung screen.

DanRo80 said:
I did it this way and after restarting it is staying on the Samsung screen.
Click to expand...
Click to collapse
You also must "factory reset" your device, as in erase all user data. Power + Volume up and then choose facotry reset / erase user data or similar, I can't remember

install supersu, in the settings there's a function for a full unroot. that should fully "unroot" our device. all root does is add some files to /system. nothing more. at least that's the case with our tab+.

MichaelIvinov said:
You also must "factory reset" your device, as in erase all user data. Power + Volume up and then choose facotry reset / erase user data or similar, I can't remember
Click to expand...
Click to collapse
Thank you. That worked.

Bricked phone,

I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
E:failed to mount /data (No such file or directory)
E: failed to mount /sdcard (File exists)
E: copy_cache _media: Can't mount /sdcard
your storage not prepared yet,p lese use UI menu for format and reboot actions
Click to expand...
Click to collapse
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...

jutopa said:
I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...
Click to expand...
Click to collapse
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...

deDante said:
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...
Click to expand...
Click to collapse
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same

jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
Froyo has diferent bootloader than gb,ics,jb and kk. Try to flash only pit pull battery and then flash full ddlf2 with all files except pit. Good luck.

jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...

deDante said:
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...
Click to expand...
Click to collapse
Didn't work. Pretty sure that internal sd is broken.. hardware problem.

jutopa said:
Didn't work. Pretty sure that internal sd is broken.. hardware problem.
Click to expand...
Click to collapse
after flashing you get success Froyo on your device or not???

deDante said:
after flashing you get success Froyo on your device or not???
Click to expand...
Click to collapse
Noup. Reboots into recovery and got error message in recovery (the one I quoted before). After reboot, bootloop in samsung logo.

you got PASS message on odin after you flash froyo???
if PASS message appear you should be got success froyo installing and you can continue to backup you efs..
Sent from my GT-I9003 using XDA Premium 4

I9500 11GB reverting to 8GB

I got a weird issue, I re-partitioned my S4 to 11GB and everything worked fine.
But when I revert back to 8GB the mobile doesn't get recognized by any computer.
I tried stock and custom, Kitkat, Lollipop, and Marshmallow but no luck.
Tried connecting it while in recovery mode, GearCM or TWRP v3, still no luck.
The only way to fix this is by re-partitioning it to 11GB again.
Any solution? Anyone faced that before?

Have you tried flashing the stock ROM with a PIT file?

GDReaper said:
Have you tried flashing the stock ROM with a PIT file?
Click to expand...
Click to collapse
I flashed two different Stock ROMs with different PIT files but no luck.
I even done a Nand Erase All with different PIT files, but still I can't get it recognized to any PC.

aboodyaiman said:
I flashed two different Stock ROMs with different PIT files but no luck.
I even done a Nand Erase All with different PIT files, but still I can't get it recognized to any PC.
Click to expand...
Click to collapse
So why don't you keep it 11GB? Why do you want to go back?

GDReaper said:
So why don't you keep it 11GB? Why do you want to go back?
Click to expand...
Click to collapse
I'm keeping it 11GB, but some ROMs doesn't support 11GB, such as RR ROM...

If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom

khatkhatik said:
If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom
Click to expand...
Click to collapse
Any bootloader/modem? I got the OL1 and PB2 one's.

aboodyaiman said:
Any bootloader/modem? I got the OL1 and PB2 one's.
Click to expand...
Click to collapse
any modem : yup (just be a lollipop one)
any bootloader : nope
bootloader must has param.bin

Sorry for hijacking,
If you need param.bin, I've this one stored on my cloud storage. Feel free to use it.
param_i9500.zip
Edit:
Could be flashed over 8GB or 11GB pit.
Sent from my ASUS_Z00A using XDA Labs

khatkhatik said:
If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom
Click to expand...
Click to collapse
IT WORKED!! Thank you so much
But I got a little question, it's 8867 in size while I got a pit that makes it 8888, do you think it's because of that pit file I got?

krasCGQ said:
Sorry for hijacking,
If you need param.bin, I've this one stored on my cloud storage. Feel free to use it.
param_i9500.zip
Edit:
Could be flashed over 8GB or 11GB pit.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
I was waiting for this <3 Thank you.

aboodyaiman said:
IT WORKED!! Thank you so much
But I got a little question, it's 8867 in size while I got a pit that makes it 8888, do you think it's because of that pit file I got?
Click to expand...
Click to collapse
idk bc I didnt use 8gb pit for a long time
I think all the 8gb pit are same but ur case is weird
u can check ur pit files exact partition size with a software called "PIT Magic v1.3.10"
:good:

here is what i did.
in BL i put the param.bin
in AP i put twrp
in CP i put the modem
in PIT i put the 8gb pit file.
then boot into twrp and format each partition (no errors) and now i am flashing the stock rom.
did i do it correctly?

darkilong said:
here is what i did.
in BL i put the param.bin
in AP i put twrp
in CP i put the modem
in PIT i put the 8gb pit file.
then boot into twrp and format each partition (no errors) and now i am flashing the stock rom.
did i do it correctly?
Click to expand...
Click to collapse
I need to put a special note, that you need to format /data as ext3 first and format it again as ext4 as the direct format doesn't work.
Sent from my ASUS_Z00A using XDA Labs

krasCGQ said:
I need to put a special note, that you need to format /data as ext3 first and format it again as ext4 as the direct format doesn't work.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
how do i do this?
all i did in twrp is i went to wipe then advance then check then swipe.

darkilong said:
how do i do this?
all i did in twrp is i went to wipe then advance then check then swipe.
Click to expand...
Click to collapse
Tick data, select Change File System, select ext3, swipe, repeat but select ext4 instead.
Sent from my ASUS_Z00A using XDA Labs

krasCGQ said:
Tick data, select Change File System, select ext3, swipe, repeat but select ext4 instead.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
update:
i tried what you suggested, reflashing stock rom now. encountered same problem even in twrp, the phone reboots itself.
god help me i am trying to fix this for 2 days now.
=======
Here is the problem that i am encountering right now.
i am not sure what i am doing wrong, and this time whenever i flash something from recovery the phone reboots.
here are the things i did, using philz touch, i chose the install new rom (i do this everytime when flashing a new rom) then flash RR, was able to finish it but stuck in boot loop. so followed the same steps and flashed 2 other roms, infernus and halcycon (used these roms before) however before finishing the installation the phone reboots.
next step i flashed twrp via odin (success) and flashed the latest version via twrp recovery. guess what same problem, with RR it is stuck in boot loop while with other roms, it does not complete the installation. this thing never happened to me.
next step i used this adb thing and i believe it is successful, however same problem persists.
the only thing i can think of is to flash the original i9500 firmware which i am downloading right now and will flash it via odin.

darkilong said:
update:
i tried what you suggested, reflashing stock rom now. encountered same problem even in twrp, the phone reboots itself.
god help me i am trying to fix this for 2 days now.
=======
Here is the problem that i am encountering right now.
i am not sure what i am doing wrong, and this time whenever i flash something from recovery the phone reboots.
here are the things i did, using philz touch, i chose the install new rom (i do this everytime when flashing a new rom) then flash RR, was able to finish it but stuck in boot loop. so followed the same steps and flashed 2 other roms, infernus and halcycon (used these roms before) however before finishing the installation the phone reboots.
next step i flashed twrp via odin (success) and flashed the latest version via twrp recovery. guess what same problem, with RR it is stuck in boot loop while with other roms, it does not complete the installation. this thing never happened to me.
next step i used this adb thing and i believe it is successful, however same problem persists.
the only thing i can think of is to flash the original i9500 firmware which i am downloading right now and will flash it via odin.
Click to expand...
Click to collapse
Do you have the original firmware? If so put it in AP and the 8GB pit file and tick the Nand Earse All, wait for the ROM to be booted, reboot into stock recovery and do a full wipe (factory reset and cache) then reboot.

Then flash TWRP and try to install the RR one and give me your feedback.

aboodyaiman said:
Do you have the original firmware? If so put it in AP and the 8GB pit file and tick the Nand Earse All, wait for the ROM to be booted, reboot into stock recovery and do a full wipe (factory reset and cache) then reboot.
Click to expand...
Click to collapse
it failed, write failed it says in odin