[Deodexed & Zipaligned GT-I9305 ZHALI8] for GT-I9305 [ONLINE] - Galaxy S III I9305 (4G LTE + 2GB RAM) Android Deve

Based on Latest firmware version : PDA:LI8 / PHONE:LI2 / CSC:LI6 (TGY)
Just like ausdim's deodex package, this is not a full ROM, it will install and replace only your system/app and system/framework folders so please make sure you are on the above stated firmware before continuing.
Tested on my ZHALI8 based GT-I9305 (TGY Hong Kong unit).
You need to have CWM Recovery installed.
Link:
http://d-h.st/users/kazuni/?fld_id=6292#files
Shoutout to ausdim's zipalign and deodex script, props bro!

Hi is that able to use on my ZHALI7 (HK Device) ?

Yes, it is.
Sent from my GT-I9305

kazuni said:
Yes, it is.
Sent from my GT-I9305
Click to expand...
Click to collapse
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot

asiafalcon said:
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot
Click to expand...
Click to collapse
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.

kazuni said:
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.
Click to expand...
Click to collapse
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊,说的好累。。兄弟你在香港,应该懂中文吧?
我按照之前给的连接的办法,在odin界面刷入cwm包,之后重启机器,结果进入的还是3e的界面。之前机器到手的时候是li7,后来连接wifi之后,强制升级了。

Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?

bonglau0429 said:
Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?
Click to expand...
Click to collapse
You can use this package on ZHALI7, however it will not update your modem/csc/boot to ZHALI8. I don't think it's a major problem though, as it is just a software package modification and it should work properly.

asiafalcon said:
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊,说的好累。。兄弟你在香港,应该懂中文吧?
我按照之前给的连接的办法,在odin界面刷入cwm包,之后重启机器,结果进入的还是3e的界面。之前机器到手的时候是li7,后来连接wifi之后,强制升级了。
Click to expand...
Click to collapse
Please send me private message, thanks

Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?

slotmachine88 said:
Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?
Click to expand...
Click to collapse
I'll state carefully and again, do not ever re-partition the device UNLESS 1) you have a backup EFS copy and 2) you are sure that the partition PIT file you are using is for i9305/T AND your specific model (16/32/64 gb), and nothing else.
I'll also re-elaborate my steps - after you have first flashed the Odin rom , make sure you install the CWM through odin AFTER at least two reboots. 3e will be gone once you do so.

Re: Kazumi
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?

slotmachine88 said:
Re: Kazumni
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?
Click to expand...
Click to collapse
should be, unless the device's NV data area (IMEI) is corrupted. Otherwise, I would suggest you to reflash the official rom first and check whether your device has a signal or not.

Related

[ROOT/CWM-TOUCH] Galaxy S2-Plus i9105

I DO NOT OWN THE DEVICE SO I CANNOT TEST SO PLEASE TEST AND REPORT !
I have got some request to port CWM/root this device i have tried my best to port it from galaxy grand duos as they are of the same SoC's and somewhat the same specs !
So if any doubts you can ask freely !
The guide is same as this ---> Click me !
Instructions :
-Download CWMtouch-i9105_chotu.tar.md5.zip from here ---> Click me !
-For Indian firmwares download this recovery image ---> Click me!
-Extract it and flash it with odinv3 (you can download it from guide link attachement)
-Got to cwm by vol up + home + power button ..
Done !
How to root :
Download Superuser app from here ---> Click me !
Flash it seeing the guide link i gave !
Please any one test it so that i can make changes or finalize !
CREDITS :
Chainfire for amazing SuperSu app
Press thanks if i helped !
FAQ's :
Q. I am getting stock recovery instead of CWM touch recovery.Why is that ?
Two reasons : 1. If your firware is updated through KIES the odin cannot reach the block in which the recovery is there.
Solution : Flash any Stock Firmware through Odin and then flash the recovery.
2. Random issue is spotted where the recovery does not flash after the above solution too.
Solution : Uncheck auto-reboot. After Odin says PASS remove battery and re-insert it, Now you can enter CWM !
Q. Why is my download not ending even though md5 is verified?
Solution : If you are using the USB cable which came with the phone please change it , it is damn slow !
Q. COM port is not turning up !!!!!!
Solution : Update your ADB driver or install it properly.
Q. All of the above is correct,then why the hell odin is not flashing the recovery ?
Solution : Try flashing through odin3 v3.07(try googling it for download),then too you can't get it right then the hell demon is in your mobile he'll not let you do this
Click to expand...
Click to collapse
Thank you so much for your work and kindly helps.
Hi,
First of all many thanks chotu222.
I have just tested this and I can confirm that it works without any problems !
I have flashed the SuperSU 1.10 zip file as indicated in the tutorial and already installed one app that requires root.
Thank you !
flor1n said:
Hi,
First of all many thanks chotu222.
I have just tested this and I can confirm that it works without any problems !
I have flashed the SuperSU 1.10 zip file as indicated in the tutorial and already installed one app that requires root.
Thank you !
Click to expand...
Click to collapse
That means you have got root right ???
I have changed the topic to confirmed thanks for testing
flor1n said:
Hi,
First of all many thanks chotu222.
I have just tested this and I can confirm that it works without any problems !
I have flashed the SuperSU 1.10 zip file as indicated in the tutorial and already installed one app that requires root.
Thank you !
Click to expand...
Click to collapse
congratulations.
chotu222 said:
That means you have got root right ???
I have changed the topic to confirmed thanks for testing
Click to expand...
Click to collapse
Yes I can confirm that I have root privileges.
it works
now I have super SU on my I9105P. that's fatastic.
Thank you all!!
tested it on I9105p, unfortunately it did not root! I'm still stuck in Android system recovery, while Odin says succesfull.
You must be missing something or doing something wrong.
What version of ODIN do you have ? I have used v3.07
Have you enabled the "USB debugging" in android's Developer options ?
Give us more details on the exact procedure/steps that you are doing.
flor1n said:
You must be missing something or doing something wrong.
What version of ODIN do you have ? I have used v3.07
Have you enabled the "USB debugging" in android's Developer options ?
Give us more details on the exact procedure/steps that you are doing.
Click to expand...
Click to collapse
Not sure if I did something wrong, also I had Odin v3.04 I downloaded/used Odin v3.07 afterwards, but that still did not work.
These are the steps I did.
1. I downloaded the ABD drivers
2. Downloaded the recovery from this thread
3. Turned off my device
4. Went to odin mode
5. Connected my usb cable to my mobile
6. The mobile got detected through Odin3
7. I selected CWM through PDA
8. Clicked start
9. Waited till it went succesfull
10. Turned my phone yet again off
11. Tried to go to CWM, but instead I went to Android system recovery
Also dev. options were enabled.
Haiph0 said:
Not sure if I did something wrong, also I had Odin v3.04 I downloaded/used Odin v3.07 afterwards, but that still did not work.
These are the steps I did.
1. I downloaded the ABD drivers
2. Downloaded the recovery from this thread
3. Turned off my device
4. Went to odin mode
5. Connected my usb cable to my mobile
6. The mobile got detected through Odin3
7. I selected CWM through PDA
8. Clicked start
9. Waited till it went succesfull
10. Turned my phone yet again off
11. Tried to go to CWM, but instead I went to Android system recovery
Also dev. options were enabled.
Click to expand...
Click to collapse
OK, here are some other things that may help with troubleshooting:
- I have the i9105P model (with NFC)
- The drivers installed from KIES tough this should not make any difference.
- The firmware version installed on my phone using ODIN is I9105XXAMB2 downloaded from here: http://samsung-updates.com/device/?id=GT-I9105P
For the non-NFC version I cannot see a similar firmware version but I see that there is an I9105DDAMB2 version built on 12 Feb
Maybe chotu222 is can tell if the firmware revision on the phone should make any difference.
flor1n said:
OK, here are some other things that may help with troubleshooting:
- I have the i9105P model (with NFC)
- The drivers installed from KIES tough this should not make any difference.
- The firmware version installed on my phone using ODIN is I9105XXAMB2 downloaded from here: http://samsung-updates.com/device/?id=GT-I9105P
For the non-NFC version I cannot see a similar firmware version but I see that there is an I9105DDAMB2 version built on 12 Feb
Maybe chotu222 is can tell if the firmware revision on the phone should make any difference.
Click to expand...
Click to collapse
OHHHH, I'm using I9105PXXAMA2, perhaps it's because of the firmware. Perhaps Chotu might be able to fix this. Thanks.
Haiph0 said:
OHHHH, I'm using I9105PXXAMA2, perhaps it's because of the firmware. Perhaps Chotu might be able to fix this. Thanks.
Click to expand...
Click to collapse
Yes it is because of the firmware. .it differs from region to region !
If you can give your recovery image I might port it to you too !!
chotu222 said:
Yes it is because of the firmware. .it differs from region to region !
If you can give your recovery image I might port it to you too !!
Click to expand...
Click to collapse
Sorry for asking, but how do I give my recovery image to you? I have no idea on how that works.
I can confirm it works great, thank you very much for the info.
Haiph0 said:
Sorry for asking, but how do I give my recovery image to you? I have no idea on how that works.
Click to expand...
Click to collapse
download your firmware from google any site
extract it with winrar or anything ! you will see recovery.img in it ...i want that recovery image
chotu222 said:
download your firmware from google any site
extract it with winrar or anything ! you will see recovery.img in it ...i want that recovery image
Click to expand...
Click to collapse
Done, I have sent you a private message.
- I have the i9105P model (with NFC)
- just installed on my phone using ODIN this I9105XXAMB2
but installation of SuperSU in CWM fails It says "Bad"
have tried 1.10 and 1.20
Click to expand...
Click to collapse
ok, solved
used another SD-Card, seems to be a size Problem. 16GB SD - Not ok, 8 GB - OK
myf said:
ok, solved
used another SD-Card, seems to be a size Problem. 16GB SD - Not ok, 8 GB - OK
Click to expand...
Click to collapse
backup your data format sdcard once then it will be ok

[Q] Can't install CM 11 Error Status 7 WifiRf Model

I have the Galaxy Tab 2 10.1 Wifi & rf Model
First time "rooting a device". And now I'm trying to install a rom with no success PLEASE HELP ME
First, i rooted the tablet with CF-Auto-Root from ChainFire http://forum.xda-developers.com/showthread.php?t=1957165
Everything went great. I checked with root checker and i got root access.
Later I installed via Odin GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5 http://www.androidfilehost.com/?w=files&flid=14129 from Android-Andi
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the
cm-11-20140426-UNOFFICIAL-p5110.zip http://www.androidfilehost.com/?w=files&flid=14141 that I had on the sd card
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
jazzvel said:
I have the Galaxy Tab 2 10.1 Wifi & rf Model
First time "rooting a device". And now I'm trying to install a rom with no success PLEASE HELP ME
First, i rooted the tablet with CF-Auto-Root from ChainFire http://forum.xda-developers.com/showthread.php?t=1957165
Everything went great. I checked with root checker and i got root access.
Later I installed via Odin GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5 from Android-Andi
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the cm-11-20140426-UNOFFICIAL-p5100.zip that i had on the sd card
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
Click to expand...
Click to collapse
Looks like you flashed a 5100 Rom on a 5110 or 5113 tab. Check your model number carefully before proceeding and thenyou need to use the ROM that is specific to your tab model. If you have a model GTP5100 then only 5100 Rom. If you have 5110 or 5113 model then you may use a 5110 or 5113 Rom. Those 2 (5110/5113) are basically interchangeable. Be careful and make sure you are using correct version as you may brick your device if not.
CSP III said:
Looks like you flashed a 5100 Rom on a 5110 or 5113 tab. Check your model number carefully before proceeding and thenyou need to use the ROM that is specific to your tab model. If you have a model GTP5100 then only 5100 Rom. If you have 5110 or 5113 model then you may use a 5110 or 5113 Rom. Those 2 (5110/5113) are basically interchangeable. Be careful and make sure you are using correct version as you may brick your device if not.
Click to expand...
Click to collapse
Oh my bad, there was a typo on my post the name of the file I fixed it and added the links to the places where i got the files.
So yeah, I used the correct one the 5110 that is supposed to work with the 5113.
And well, the result is that I have a rooted tablet with the GT-P5110_PhilZ-Touch-Recovery_6.26.1 But Can't install the CM 11...
Any Help will be much appreciated
jazzvel said:
Oh my bad, there was a typo on my post the name of the file I fixed it and added the links to the places where i got the files.
So yeah, I used the correct one the 5110 that is supposed to work with the 5113.
And well, the result is that I have a rooted tablet with the GT-P5110_PhilZ-Touch-Recovery_6.26.1 But Can't install the CM 11...
Any Help will be much appreciated
Click to expand...
Click to collapse
Try one of Android Andi's CM11 Unofficial builds.http://forum.xda-developers.com/showthread.php?t=2571498 Personally, I never have luck with the nightlies.
CSP III said:
Try one of Android Andi's CM11 Unofficial builds.http://forum.xda-developers.com/showthread.php?t=2571498 Personally, I never have luck with the nightlies.
Click to expand...
Click to collapse
and that is what I tried
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the
cm-11-20140426-UNOFFICIAL-p5110.zip
Click to expand...
Click to collapse
if I have the Philz-touch recovery, if I flash another recovery via Oidn will philz-touch recovery will be replaced? Can I do that without messing my tablet?
And then try to install the unofficial cm 11 again?
jazzvel said:
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
Click to expand...
Click to collapse
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Android-Andi said:
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Click to expand...
Click to collapse
Thanks for your answer.
So I can just flash the correct one and it will overwrite the existing one? Or do i have to uninstall first?
No Mirrors
Android-Andi said:
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Click to expand...
Click to collapse
I get no mirrors for this download. But I do with any other downloads you have there.
GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5
Or could I install the .zip with Odin?
GT-P5110_PhilZ-Touch-Recovery_6.26.1.zip
no @jazzvel you can not use the zip (not without modification to flash it from current recovery).... i did that four you.
Download attached "recovery-tab2.zip"
copy it to your internal Storage or MicroSD
boot your recovery
flash the "recovery-tab2.zip"
reboot your recovery to take affect!
DON´T USE ATTACHED ZIP ON OTHER DEVICES - P511X ONLY!
It Worked!
Android-Andi said:
no @jazzvel you can not use the zip (not without modification to flash it from current recovery).... i did that four you.
Download attached "recovery-tab2.zip"
copy it to your internal Storage or MicroSD
boot your recovery
flash the "recovery-tab2.zip"
reboot your recovery to take affect!
DON´T USE ATTACHED ZIP ON OTHER DEVICES - P511X ONLY!
Click to expand...
Click to collapse
This worked flawlesly! Thanks!
If you don't mind me asking, just want to know for future reference
The recovery-tab2.zip contained the correct philz-touch recovery or What was it?
Thank you very much!
You are the man!

[Q] N8020 semi brick,stuck startup logo,No Recovery Mode!

Hello All,
My N8020 is now semi brick after trying to flash it back to stock.It was on custom rom before but showing different errors so i decided to change the rom...First i tried to install another custom rom which was cynogenmod 10 but after intstalling this rom from cwm phone stuck at cynogenmod startup logo i waited for long time but still nothing.Then tried different versions of cynogen roms but same...After all this i decided to install a official rom so i flashed this with
N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar
but now the real problem started..Now i can boot phone in download mode but not in recovery mode at all...Then i tried to flash a cwm via odin and get "PASS" messege in odin but still no recovery mode...Tried to flash to flash clockwork recovery several time but nothing changed and then i check in download mode the custom flash counter increase every time i try to flash cwm...then i searched the stock recovery for 8020 but when i try to flash it via odin i always get "FAIL"...
Now i m out of ideas and searching for a real solution....SO can anybody please tell me what to do next to get it back to life???
Regards,
Muneeb
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thanks for reply but can u please tell me from where i get n8020 twrp?i only able to find N8000 to N8013 but cant find for N8020....
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thnx but its still same..did this as per your instructions but tablet still on samsung galaxy note 10.1 logo i have pressed the vol up for long time but nothing...One more thing that one more count added to custom binary download.
Still no luck...
I'm sorry to hear that. I hope you'll find a solution soon.
Sent from my Nexus 5 using Tapatalk
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
MUNEEB_AKHTAR_RAZA said:
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
Click to expand...
Click to collapse
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
KDKobes said:
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
Click to expand...
Click to collapse
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
MUNEEB_AKHTAR_RAZA said:
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
Click to expand...
Click to collapse
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
KDKobes said:
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
Click to expand...
Click to collapse
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
I didn't find a working pit for my n 8010. Don't worry too much about the binary counter, mine was 118 today, I reset it with triangle away. I don't have the balls to do a nand erase on mine, I'm not even sure that is required for my problem, at least mine is working.
Sent from my Nexus 5 using Tapatalk
MUNEEB_AKHTAR_RAZA said:
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
Click to expand...
Click to collapse
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
KDKobes said:
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
Click to expand...
Click to collapse
Never ticked this option yet...So you suggest me to do so?
MUNEEB_AKHTAR_RAZA said:
Never ticked this option yet...So you suggest me to do so?
Click to expand...
Click to collapse
Yes, dont check auto boot though leave that unchecked and if it passes reboot to recovery and do a data wipe then reboot. If you run into error add your pit file to the pit window along with your stock tar.md5 file and run it just as I mentioned before with repartition selected
Make sure the pit file you use is for your device model/storage size
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
pilo_kulet said:
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
Click to expand...
Click to collapse
Last post 2014 poster no longer active on the forum .
TWRP and CWM see development threads .
Oddly enough a notification was sent to my email. That's correct though I'm no longer active in this forum.
Here is all I have left on the Galaxy Note 10.1, anything else you need you will have to find.
https://drive.google.com/open?id=0B-BP_JVn6T1Mb1o4UXVUYUpnc0E
Thanks for that .
I PM the mods is probably why you got the message .
Sadly/ logically this forum is nearly dead .

[Q] Need root for Galaxy Mega 2

I have tried every root method except for vroot or anything that doesn't exist on xda
Cause one click root sound too good to be true (Well except if it's on xda)
I have waited a month for root
Why no root,no forums,no support for this device yet?
(Well except there is cf auto root for older version)
I think i have reply too much asking for root
I decide to create new thread interest
What should i do?
Wait a just a little bit more?
skyhot004 said:
I have tried every root method except for vroot or anything that doesn't exist on xda
Cause one click root sound too good to be true (Well except if it's on xda)
I have waited a month for root
Why no root,no forums,no support for this device yet?
(Well except there is cf auto root for older version)
I think i have reply too much asking for root
I decide to create new thread interest
What should i do?
Wait a just a little bit more?
Click to expand...
Click to collapse
This is how you root your galaxy mega 2
http://androidxda.com/root-samsung-galaxy-mega-2-sm-g750f
## Hit the thanks button if i helped u
Mr.WoW said:
This is how you root your galaxy mega 2
http://androidxda.com/root-samsung-galaxy-mega-2-sm-g750f
## Hit the thanks button if i helped u
Click to expand...
Click to collapse
I already tried CF auto root and every possible method on xda (It's written in my post........)
I'm just trying to get mega 2 some attention
skyhot004 said:
I already tried CF auto root and every possible method on xda (It's written in my post........)
I'm just trying to get mega 2 some attention
Click to expand...
Click to collapse
Oh .. you mean that CF Auto root didn't work for you
I thought it works always
Sewrizer said:
CF autoroot always works.
You must have done something wrong. Try that method again and report back please.
Click to expand...
Click to collapse
I have already done it again before making a thread
It's just not work
Well there's error something like : Can't write to x
It's can't write to cache or nand i can't remember
Also! my mega 2 is in the latest version and the build number is different from cf auto root file
But it's written that it's may work and there's a high chance that it will
CF auto root build number : KTU84P.G750FXXU1ANI1
My build number : KTU84P.G750FXXU1ANJ1
I can flash back my stock firmware so it's not write permission problem
Same problem here.. i have galaxy mega 2 too.. always failed when try rooting this phone..
But i have SM-G750H not SM-G750F .. anyone can please help me? I need root my phone.. thanks
stephanus88 said:
Same problem here.. i have galaxy mega 2 too.. always failed when try rooting this phone..
But i have SM-G750H not SM-G750F .. anyone can please help me? I need root my phone.. thanks
Click to expand...
Click to collapse
Hi, any update regarding rooting mega 2 (KTU84P.G750FXXU1ANJ1) ??
I'm really getting too tired trying every method availible on web but no luck to get it rooted yet!.. always fail in odin
numan8 said:
Hi, any update regarding rooting mega 2 (KTU84P.G750FXXU1ANJ1) ??
I'm really getting too tired trying every method availible on web but no luck to get it rooted yet!.. always fail in odin
Click to expand...
Click to collapse
SM-G750H? CF-AUTO-ROOT Before rooting please flash the matching FIRMWARE.
Hello, my phone is SM-G750F not SM-G750H.
So, will this file work with it? .... i have tried CF-Auto-Root for SM-G750F from their website, but it always fail in oden!.
numan8 said:
Hello, my phone is SM-G750F not SM-G750H.
So, will this file work with it? .... i have tried CF-Auto-Root for SM-G750F from their website, but it always fail in oden!.
Click to expand...
Click to collapse
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT
LS.xD said:
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT
Click to expand...
Click to collapse
hi,
well, this matter i've missed and just noticed now, and seems it is the cause of the failed install.
the build numbers for the two phones i was trying to root are G750FXXU1ANGD and G750FXXU1ANJ1 . But when i've just checked again your post , the build number that you mentioned is G750FXXU1ANI1.
I'm downloading now the proper (G750FXXU1ANI1) from sammobile , and going to flash both of the phones and then try to root them with the file you showed above , hopefully it will work !.
thanks alot LS.xD
Update - fail again!
LS.xD said:
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT
Click to expand...
Click to collapse
numan8 said:
hi,
well, this matter i've missed and just noticed now, and seems it is the cause of the failed install.
the build numbers for the two phones i was trying to root are G750FXXU1ANGD and G750FXXU1ANJ1 . But when i've just checked again your post , the build number that you mentioned is G750FXXU1ANI1.
I'm downloading now the proper (G750FXXU1ANI1) from sammobile , and going to flash both of the phones and then try to root them with the file you showed above , hopefully it will work !.
thanks alot LS.xD
Click to expand...
Click to collapse
Hello... plz help
i did downloaded and flash this version from sammobile (G750FXXU1ANI1_G750FOLB1ANI1_G750FXXU0ANI1_HOME.tar.md5)
and after i tried to flash the cf-root file (CF-Auto-Root-mega2lte-mega2ltexx-smg750f.tar.md5) still get the error in odin (see attachment).
please advice me what shall i do more to get this thing rooted.
numan8 said:
Hello... plz help
i did downloaded and flash this version from sammobile (G750FXXU1ANI1_G750FOLB1ANI1_G750FXXU0ANI1_HOME.tar.md5)
and after i tried to flash the cf-root file (CF-Auto-Root-mega2lte-mega2ltexx-smg750f.tar.md5) still get the error in odin (see attachment).
please advice me what shall i do more to get this thing rooted.
Click to expand...
Click to collapse
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?
LS.xD said:
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?
Click to expand...
Click to collapse
yes i did wipe user data and wipe cavhe right before i flash cf-root.
numan8 said:
yes i did wipe user data and wipe cavhe right before i flash cf-root.
Click to expand...
Click to collapse
I don't get it. FW + ROOT match your phone and its still not working. I'll try to get some more informations.
Is Samsung KIES installed on your computer? Uninstall it!
USB debugging enabled? Enable it!
LS.xD said:
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?
Click to expand...
Click to collapse
LS.xD said:
I don't get it. FW + ROOT match your phone and its still not working. I'll try to get some more informations.
Click to expand...
Click to collapse
yes, it just like that!! ... i bought this phone 3 days ago and since then i'm struggling just how to root it
numan8 said:
yes, it just like that!! ... i bought this phone 3 days ago and since then i'm struggling just how to root it
Click to expand...
Click to collapse
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
@numan8 I need to know if you run Win 7/8/8.1 - 32 or 64bit
LS.xD said:
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
Click to expand...
Click to collapse
please do, i'm still waiting..
appreciate if you can do fix this headache root file.
attached the fail screenshot using the new odin you've given
numan8 said:
please do, i'm still waiting..
appreciate if you can do fix this headache root file.
attached the fail screenshot using the new odin you've given
Click to expand...
Click to collapse
SOLUTION:
I extracted the recovery from CF-AUTO-ROOT and converted it to ODIN flashable recovery SM-G750F
First flash the recovery.tar.md5 and then flash the CF-AUTO-ROOT you already downloaded.
LS.xD said:
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
@numan8 I need to know if you run Win 7/8/8.1 - 32 or 64bit
Click to expand...
Click to collapse
LS.xD said:
SOLUTION:
I extracted the recovery from CF-AUTO-ROOT and converted it to ODIN flashable recovery SM-G750F
First flash the recovery.tar.md5 and then flash the CF-AUTO-ROOT you already downloaded.
Click to expand...
Click to collapse
i did follow what you said, flash your recovery file and it show pass in odin ... then flash the cf-root but fail again.
see the screenshots for more details

[Guide][Receive OTA after root][keep apps/data][GT-I9500][5.0.1]

a lot of users are having this problem and if you want to receive an OTA you have to flash the stock unrooted firmware that will cause lose of data.
this guide will show you how to receive OTA again without losing your stuff
This works on GT-I9500 ONLY! (Lollipop 5.0.1 Recovery)
This also should work on any other model, but you have to replace the recovery with your model!
Steps:
1- Go to SuperSU and scroll down to "Full unroot" then reboot.
2- Download This file to PC and extract it.
3- Go to download mode by pressing the power key + home key + volume down key at the same time, then press volume up.
4- Flash the file via Odin (AP) or (PDA)
go to check the system status, you will find it Official
you can now receive OTA.
Q&A:
What is OTA (Over The Air)? Its an update which you can receive over wifi or mobile data.
What do i get from OTA? Well, if you root your device you wont be able to receive an update again, unless from flashing firmware via Odin.
- Why im still on custom status? Because you modified your system.
- What kind of modifying? Installing busybox, editing or deleting or changing any app or file system.
and some times xposed.
- How do i restore the old app? You can restore them by flashing firmware or by restoring Nandroid backup.
- Then what is the use of your guide? Well my guide helps in first place the rooted not the modded onces.
and always do Nandroid of the original system apps+data
you are still having your apps, data, pics, vids, etc...
you can root again at anytime.
check my thread for rooting if you want
im not responsible for any bricks
thank you...
KillerJM249 said:
thank you...
Click to expand...
Click to collapse
At any time
Bricked.. wat to do?
If i am bricked, will flashing the official rom again solve the problem??
Thanks alot ...
Sent from my GT-I9500 using Tapatalk 2
yagneshlp said:
If i am bricked, will flashing the official rom again solve the problem??
Click to expand...
Click to collapse
What kind of bricked? Soft brick like bootloop?
S_7 said:
Thanks alot ...
Sent from my GT-I9500 using Tapatalk 2
Click to expand...
Click to collapse
Your welcome!
Hi there,
Thanks for the guide, just thinking you may want to say what option in Odin to put the file and what OTA stands for, for the noobs.
Just a thought.
TG09 said:
Hi there,
Thanks for the guide, just thinking you may want to say what option in Odin to put the file and what OTA stands for, for the noobs.
Just a thought.
Click to expand...
Click to collapse
Done
if i flash custom kernel i will still get update with this ?
leap_ahead said:
if i flash custom kernel i will still get update with this ?
Click to expand...
Click to collapse
I didnt test it, if you can do please confirm, and if you cant get an update just flash the stock kernel (boot.img)
If i remove some files on rom i will get update .?
Thanks
didn't work. still shows custom and doesn't check for the update.
leap_ahead said:
If i remove some files on rom i will get update .?
Thanks
Click to expand...
Click to collapse
At some point the update maybe canceled, because the update checks for the apps before the installation, always do a backup of your phone then remove what you want, after you want to update just restore the system folder from the backup
sak500 said:
didn't work. still shows custom and doesn't check for the update.
Click to expand...
Click to collapse
If you can see the stock recovery then check the SuperSU app again and maybe you are having a custom kernel
RubbaBand said:
If you can see the stock recovery then check the SuperSU app again and maybe you are having a custom kernel
Click to expand...
Click to collapse
So i need to unroot it as well ? Anyway flashed via odin original stock russian lollipop rom just to check for any update and the flashed twrp and rooted it back. Just that it takes 10 mins or more to do all this. Thought your small flash file would work .
sak500 said:
So i need to unroot it as well ? Anyway flashed via odin original stock russian lollipop rom just to check for any update and the flashed twrp and rooted it back. Just that it takes 10 mins or more to do all this. Thought your small flash file would work .
Click to expand...
Click to collapse
U try the method with flash only stock recovery and not work?
leap_ahead said:
U try the method with flash only stock recovery and not work?
Click to expand...
Click to collapse
yes flashed stock recovery but still showed custom. I was on original stock russain with root and custom recovery only. No custom kernel or different ROM.
sak500 said:
So i need to unroot it as well ? Anyway flashed via odin original stock russian lollipop rom just to check for any update and the flashed twrp and rooted it back. Just that it takes 10 mins or more to do all this. Thought your small flash file would work .
Click to expand...
Click to collapse
yes you need to full unroot your device as mentioned in the guide then flash the file, lol no my small file its just the stock recovery
Is this available for Gt-i9505 version
Is this available for GT-i9505 version?

Categories

Resources