Database Info

[Deodexed & Zipaligned GT-I9305 ZHALI8] for GT-I9305 [ONLINE]

Based on Latest firmware version : PDA:LI8 / PHONE:LI2 / CSC:LI6 (TGY)
Just like ausdim's deodex package, this is not a full ROM, it will install and replace only your system/app and system/framework folders so please make sure you are on the above stated firmware before continuing.
Tested on my ZHALI8 based GT-I9305 (TGY Hong Kong unit).
You need to have CWM Recovery installed.
Link:
http://d-h.st/users/kazuni/?fld_id=6292#files
Shoutout to ausdim's zipalign and deodex script, props bro!

Hi is that able to use on my ZHALI7 (HK Device) ?

Yes, it is.
Sent from my GT-I9305

kazuni said:
Yes, it is.
Sent from my GT-I9305
Click to expand...
Click to collapse
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot

asiafalcon said:
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot
Click to expand...
Click to collapse
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.

kazuni said:
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.
Click to expand...
Click to collapse
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。

Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?

bonglau0429 said:
Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?
Click to expand...
Click to collapse
You can use this package on ZHALI7, however it will not update your modem/csc/boot to ZHALI8. I don't think it's a major problem though, as it is just a software package modification and it should work properly.

asiafalcon said:
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。
Click to expand...
Click to collapse
Please send me private message, thanks

Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?

slotmachine88 said:
Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?
Click to expand...
Click to collapse
I'll state carefully and again, do not ever re-partition the device UNLESS 1) you have a backup EFS copy and 2) you are sure that the partition PIT file you are using is for i9305/T AND your specific model (16/32/64 gb), and nothing else.
I'll also re-elaborate my steps - after you have first flashed the Odin rom , make sure you install the CWM through odin AFTER at least two reboots. 3e will be gone once you do so.

Re: Kazumi
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?

slotmachine88 said:
Re: Kazumni
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?
Click to expand...
Click to collapse
should be, unless the device's NV data area (IMEI) is corrupted. Otherwise, I would suggest you to reflash the official rom first and check whether your device has a signal or not.

[Q] (Q) ¿Error al entrar en CWM?

Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!

hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.

matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk

CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!

that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.

CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?

matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.

CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this

CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!

Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors

@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.

CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks

matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.

vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!

matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps

Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made​​?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)

you need to wipe it 1st before flashing CM11 and Gapps...

Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS

[Q] Help Me Please...My device is dead

So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

TheAndroidNinja said:
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc

Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk

Frankenscript said:
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help

TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
Click to expand...
Click to collapse
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.

tokenpoke said:
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx

TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
Click to expand...
Click to collapse
Read my last post. Use a different ROM then. There are plenty to choose from.

To be clear what you need to do is use the CWM you have to install A DIFFERENT recovery, one more compatible with a lot of the current custom ROMs. I have used TWRP so for example:
1. Boot to CWM with TWRP package on your microSD
2. Flash TWRP
3. Reboot into recovery... CWM will be gone and you will have TWRP instead
4. In Twrp Wipe caches and format system
5. Still In Twrp, Flash ROM of your choice from ROM downloaded onto your microsd
6. Reboot system and give it time.
Let us know how it goes!

Thank you everyone
Thank You Thanx a lot for helping me guys
I downloaded TWRP n then downloaded the latest version of OMNI Rom and it worked
Thnak u soo much guys
CWM n Cyanagonemod has a lot of bugs and is really ****

CSP III said:
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
Click to expand...
Click to collapse
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please

Glad you got your system to boot omnirom! You may need to re root the device... Others here can help you get that done, as I'm no expert.

TheAndroidNinja said:
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well

Thanx
CSP III said:
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Click to expand...
Click to collapse
Just flashed Supersu and it worked thanx a lot guys

XT926 loses connection with simcard and restarts.

Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal

rafjak said:
Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal
Click to expand...
Click to collapse
Have you tried to re-flash your stock rom.

OGdroidster said:
Have you tried to re-flash your stock rom.
Click to expand...
Click to collapse
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ

I had the issue too under cyanogen...
On mine i have disassambled the phone and maximized the gap between Mainboard and housing on the left... Then i fixed the screws again... Now the sim tray is sitting tighter! Only all two weeks i get this error again
Gesendet von meinem Moto Razr M mit Tapatalk

rafjak said:
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ
Click to expand...
Click to collapse
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.

OGdroidster said:
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.
Click to expand...
Click to collapse
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ

rafjak said:
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ
Click to expand...
Click to collapse
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?

OGdroidster said:
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?
Click to expand...
Click to collapse
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ

rafjak said:
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ
Click to expand...
Click to collapse
use what ever recovery you want. If you run into problems you can use twrp to fix or repair certain things.

Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.

Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
rafjak said:
Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.
Click to expand...
Click to collapse
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.

OGdroidster said:
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
Click to expand...
Click to collapse
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ

rafjak said:
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ
Click to expand...
Click to collapse
What version of TWRP are you using? If you told me already sorry just don't remember.

OGdroidster said:
What version of TWRP are you using? If you told me already sorry just don't remember.
Click to expand...
Click to collapse
2.8.6.0
Is there some newer one for XT926?
RJ

rafjak said:
2.8.6.0
Is there some newer one for XT926?
RJ
Click to expand...
Click to collapse
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.

OGdroidster said:
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.
Click to expand...
Click to collapse
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ

rafjak said:
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ
Click to expand...
Click to collapse
Mine doesn't reboot and has been optimized. Also try a different ROM to flash but like DU or Mokee there's plenty of other ones. But try changing system to ext4 first. Then flash. I gave you directions on that in post few minutes ago. Try it and see if it works.

Returning to the main topic of this tread.
I have noticed that when I have MOBILE DATA turn off
the restarts do not occur.
Regards
RJ

Is it possible to flash CM 11 via twrp 2.8.6.0?
Regards
RJ

I have found the solution of this issue.
The problem is with the FAST DORMANCY service.
When it is active but provider does not support it
it causes problem.
It should be disabled in the file /system/build.prop
ro.mot.ds.fastdormancy.disable=true
Regards
RJ

Help!My OPO cannot flash ROM with recovery.

The Screenshot is below. I got stuck in the H2OS 2.0 so I flash the cos12 to save it from bricking. Then I flash the TWRP. When I wanted to flash a CM13,the problem in the screenshot occurred. Need some Help here.

Help,PLZ
I don't have another phone.I gotta fix this as soon as possible in case I don't miss any important phone calls. plz. Somebody gives me a hand.

The problem is that you're not installing the TWRP flashable rom.
See that the zip file of the CM13 build you tried to install is called cm13......bacon-signed-fastboot......zip. So you're trying to install a fastboot rom with a custom recovery, instead of trying to install a custom rom for a custom recovery. That's why TWRP doesn't found any meta-inf folder.
When downloading the rom in the official web be sure to download the one compatible with custom recoveries.

mustang_ssc said:
The problem is that you're not installing the TWRP flashable rom.
See that the zip file of the CM13 build you tried to install is called cm13......bacon-signed-fastboot......zip. So you're trying to install a fastboot rom with a custom recovery, instead of trying to install a custom rom for a custom recovery. That's why TWRP doesn't found any meta-inf folder.
When downloading the rom in the official web be sure to download the one compatible with custom recoveries.
Click to expand...
Click to collapse
Okay,Thanks. But when I tried another ROM (NucleaRom-V2.1.4-BETA[7.0]-bacon-20161011-0245.zip) ,I failed again. It occurred error 7. The TWRP is universal in many ROMs,right?I used to installed many with it successfully.However, I failed again and again this time.

SimonYJB said:
Okay,Thanks. But when I tried another ROM (NucleaRom-V2.1.4-BETA[7.0]-bacon-20161011-0245.zip) ,I failed again. It occurred error 7. The TWRP is universal in many ROMs,right?I used to installed many with it successfully.However, I failed again and again this time.
Click to expand...
Click to collapse
The 7 error use to happen when you get a bad download and there is missing data. You can compare the md5 of the rom to check if there are missing data or simply download it again, or try another rom.
Also i suggest you to use the latest TugaPower TWRP.

mustang_ssc said:
The 7 error use to happen when you get a bad download and there is missing data. You can compare the md5 of the rom to check if there are missing data or simply download it again, or try another rom.
Also i suggest you to use the latest TugaPower TWRP.
Click to expand...
Click to collapse
Actually,I'm using the latest TeamWin - TWRP. Here is the screenshot. I downloaded the cm13 official but it didn't work too. Could you give a guide to get a Tugapower TWRP? Maybe it will work with the TugaPower TWRP.

SimonYJB said:
Actually,I'm using the latest TeamWin - TWRP. Here is the screenshot. I downloaded the cm13 official but it didn't work too. Could you give a guide to get a Tugapower TWRP? Maybe it will work with the TugaPower TWRP.
Click to expand...
Click to collapse
Did you do wipes (system, data, cache and dalvik cache) before flashing the roms?

mustang_ssc said:
Did you do wipes (system, data, cache and dalvik cache) before flashing the roms?
Click to expand...
Click to collapse
yea,of course. This problem began at my last ROM(H2OS V2.0.1). Is it the main reason? Before that ROM ,everything goes well.

SimonYJB said:
yea,of course. This problem began at my last ROM(H2OS V2.0.1). Is it the main reason? Before that ROM ,everything goes well.
Click to expand...
Click to collapse
Well, honestly i don't know.
I would suggest you to check if the files you have downloaded are not corrupted in case the computer where you're downloading the roms is corrupt them, i experienced that case. So you can check md5 following this guide: http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/113984-what-md5-how-use-verify-your-download.html
And the TWRP i suggested you is here: http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366. You can install it though fastboot or try with the current recovery you have.

mustang_ssc said:
Well, honestly i don't know.
I would suggest you to check if the files you have downloaded are not corrupted in case the computer where you're downloading the roms is corrupt them, i experienced that case. So you can check md5 following this guide: http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/113984-what-md5-how-use-verify-your-download.html
And the TWRP i suggested you is here: http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366. You can install it though fastboot or try with the current recovery you have.
Click to expand...
Click to collapse
Thank you very much. I really appreciate it. I'll try as you say.Hope the issues can be solved.:good: