Database Info

[Deodexed & Zipaligned GT-I9305 ZHALI8] for GT-I9305 [ONLINE]

Based on Latest firmware version : PDA:LI8 / PHONE:LI2 / CSC:LI6 (TGY)
Just like ausdim's deodex package, this is not a full ROM, it will install and replace only your system/app and system/framework folders so please make sure you are on the above stated firmware before continuing.
Tested on my ZHALI8 based GT-I9305 (TGY Hong Kong unit).
You need to have CWM Recovery installed.
Link:
http://d-h.st/users/kazuni/?fld_id=6292#files
Shoutout to ausdim's zipalign and deodex script, props bro!

Hi is that able to use on my ZHALI7 (HK Device) ?

Yes, it is.
Sent from my GT-I9305

kazuni said:
Yes, it is.
Sent from my GT-I9305
Click to expand...
Click to collapse
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot

asiafalcon said:
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot
Click to expand...
Click to collapse
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.

kazuni said:
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.
Click to expand...
Click to collapse
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。

Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?

bonglau0429 said:
Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?
Click to expand...
Click to collapse
You can use this package on ZHALI7, however it will not update your modem/csc/boot to ZHALI8. I don't think it's a major problem though, as it is just a software package modification and it should work properly.

asiafalcon said:
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。
Click to expand...
Click to collapse
Please send me private message, thanks

Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?

slotmachine88 said:
Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?
Click to expand...
Click to collapse
I'll state carefully and again, do not ever re-partition the device UNLESS 1) you have a backup EFS copy and 2) you are sure that the partition PIT file you are using is for i9305/T AND your specific model (16/32/64 gb), and nothing else.
I'll also re-elaborate my steps - after you have first flashed the Odin rom , make sure you install the CWM through odin AFTER at least two reboots. 3e will be gone once you do so.

Re: Kazumi
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?

slotmachine88 said:
Re: Kazumni
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?
Click to expand...
Click to collapse
should be, unless the device's NV data area (IMEI) is corrupted. Otherwise, I would suggest you to reflash the official rom first and check whether your device has a signal or not.

[Q] Need root for Galaxy Mega 2

I have tried every root method except for vroot or anything that doesn't exist on xda
Cause one click root sound too good to be true (Well except if it's on xda)
I have waited a month for root
Why no root,no forums,no support for this device yet?
(Well except there is cf auto root for older version)
I think i have reply too much asking for root
I decide to create new thread interest
What should i do?
Wait a just a little bit more?

skyhot004 said:
I have tried every root method except for vroot or anything that doesn't exist on xda
Cause one click root sound too good to be true (Well except if it's on xda)
I have waited a month for root
Why no root,no forums,no support for this device yet?
(Well except there is cf auto root for older version)
I think i have reply too much asking for root
I decide to create new thread interest
What should i do?
Wait a just a little bit more?
Click to expand...
Click to collapse
This is how you root your galaxy mega 2
http://androidxda.com/root-samsung-galaxy-mega-2-sm-g750f
## Hit the thanks button if i helped u

Mr.WoW said:
This is how you root your galaxy mega 2
http://androidxda.com/root-samsung-galaxy-mega-2-sm-g750f
## Hit the thanks button if i helped u
Click to expand...
Click to collapse
I already tried CF auto root and every possible method on xda (It's written in my post........)
I'm just trying to get mega 2 some attention

skyhot004 said:
I already tried CF auto root and every possible method on xda (It's written in my post........)
I'm just trying to get mega 2 some attention
Click to expand...
Click to collapse
Oh .. you mean that CF Auto root didn't work for you
I thought it works always

Sewrizer said:
CF autoroot always works.
You must have done something wrong. Try that method again and report back please.
Click to expand...
Click to collapse
I have already done it again before making a thread
It's just not work
Well there's error something like : Can't write to x
It's can't write to cache or nand i can't remember
Also! my mega 2 is in the latest version and the build number is different from cf auto root file
But it's written that it's may work and there's a high chance that it will
CF auto root build number : KTU84P.G750FXXU1ANI1
My build number : KTU84P.G750FXXU1ANJ1
I can flash back my stock firmware so it's not write permission problem

Same problem here.. i have galaxy mega 2 too.. always failed when try rooting this phone..
But i have SM-G750H not SM-G750F .. anyone can please help me? I need root my phone.. thanks

stephanus88 said:
Same problem here.. i have galaxy mega 2 too.. always failed when try rooting this phone..
But i have SM-G750H not SM-G750F .. anyone can please help me? I need root my phone.. thanks
Click to expand...
Click to collapse
Hi, any update regarding rooting mega 2 (KTU84P.G750FXXU1ANJ1) ??
I'm really getting too tired trying every method availible on web but no luck to get it rooted yet!.. always fail in odin

numan8 said:
Hi, any update regarding rooting mega 2 (KTU84P.G750FXXU1ANJ1) ??
I'm really getting too tired trying every method availible on web but no luck to get it rooted yet!.. always fail in odin
Click to expand...
Click to collapse
SM-G750H? CF-AUTO-ROOT Before rooting please flash the matching FIRMWARE.

Hello, my phone is SM-G750F not SM-G750H.
So, will this file work with it? .... i have tried CF-Auto-Root for SM-G750F from their website, but it always fail in oden!.

numan8 said:
Hello, my phone is SM-G750F not SM-G750H.
So, will this file work with it? .... i have tried CF-Auto-Root for SM-G750F from their website, but it always fail in oden!.
Click to expand...
Click to collapse
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT

LS.xD said:
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT
Click to expand...
Click to collapse
hi,
well, this matter i've missed and just noticed now, and seems it is the cause of the failed install.
the build numbers for the two phones i was trying to root are G750FXXU1ANGD and G750FXXU1ANJ1 . But when i've just checked again your post , the build number that you mentioned is G750FXXU1ANI1.
I'm downloading now the proper (G750FXXU1ANI1) from sammobile , and going to flash both of the phones and then try to root them with the file you showed above , hopefully it will work !.
thanks alot LS.xD

Update - fail again!
LS.xD said:
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT
Click to expand...
Click to collapse
numan8 said:
hi,
well, this matter i've missed and just noticed now, and seems it is the cause of the failed install.
the build numbers for the two phones i was trying to root are G750FXXU1ANGD and G750FXXU1ANJ1 . But when i've just checked again your post , the build number that you mentioned is G750FXXU1ANI1.
I'm downloading now the proper (G750FXXU1ANI1) from sammobile , and going to flash both of the phones and then try to root them with the file you showed above , hopefully it will work !.
thanks alot LS.xD
Click to expand...
Click to collapse
Hello... plz help
i did downloaded and flash this version from sammobile (G750FXXU1ANI1_G750FOLB1ANI1_G750FXXU0ANI1_HOME.tar.md5)
and after i tried to flash the cf-root file (CF-Auto-Root-mega2lte-mega2ltexx-smg750f.tar.md5) still get the error in odin (see attachment).
please advice me what shall i do more to get this thing rooted.

numan8 said:
Hello... plz help
i did downloaded and flash this version from sammobile (G750FXXU1ANI1_G750FOLB1ANI1_G750FXXU0ANI1_HOME.tar.md5)
and after i tried to flash the cf-root file (CF-Auto-Root-mega2lte-mega2ltexx-smg750f.tar.md5) still get the error in odin (see attachment).
please advice me what shall i do more to get this thing rooted.
Click to expand...
Click to collapse
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?

LS.xD said:
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?
Click to expand...
Click to collapse
yes i did wipe user data and wipe cavhe right before i flash cf-root.

numan8 said:
yes i did wipe user data and wipe cavhe right before i flash cf-root.
Click to expand...
Click to collapse
I don't get it. FW + ROOT match your phone and its still not working. I'll try to get some more informations.
Is Samsung KIES installed on your computer? Uninstall it!
USB debugging enabled? Enable it!

LS.xD said:
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?
Click to expand...
Click to collapse
LS.xD said:
I don't get it. FW + ROOT match your phone and its still not working. I'll try to get some more informations.
Click to expand...
Click to collapse
yes, it just like that!! ... i bought this phone 3 days ago and since then i'm struggling just how to root it

numan8 said:
yes, it just like that!! ... i bought this phone 3 days ago and since then i'm struggling just how to root it
Click to expand...
Click to collapse
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
@numan8 I need to know if you run Win 7/8/8.1 - 32 or 64bit

LS.xD said:
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
Click to expand...
Click to collapse
please do, i'm still waiting..
appreciate if you can do fix this headache root file.
attached the fail screenshot using the new odin you've given

numan8 said:
please do, i'm still waiting..
appreciate if you can do fix this headache root file.
attached the fail screenshot using the new odin you've given
Click to expand...
Click to collapse
SOLUTION:
I extracted the recovery from CF-AUTO-ROOT and converted it to ODIN flashable recovery SM-G750F
First flash the recovery.tar.md5 and then flash the CF-AUTO-ROOT you already downloaded.

LS.xD said:
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
@numan8 I need to know if you run Win 7/8/8.1 - 32 or 64bit
Click to expand...
Click to collapse
LS.xD said:
SOLUTION:
I extracted the recovery from CF-AUTO-ROOT and converted it to ODIN flashable recovery SM-G750F
First flash the recovery.tar.md5 and then flash the CF-AUTO-ROOT you already downloaded.
Click to expand...
Click to collapse
i did follow what you said, flash your recovery file and it show pass in odin ... then flash the cf-root but fail again.
see the screenshots for more details

Q: update to JB to Lollipop

Hello All,
I want to install lollipop builds on my tab 2 7" (Gt-P3100) now i am on Jb 4.1.1 can i directly flash LP after i root and install philz. or tell me how to do i saw jb 4.2.2 update file but when i download it says site blocked. so please help me how to do in step by step

It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button ?

You can flash the latest bootloader from codeworkx dev-host folder, make sure you are in your device folder!
http://d-h.st/users/codeworkx

shsagnik said:
It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button
Click to expand...
Click to collapse
i tried download 4.2.2 firmware frm one thread but site blocked can u give me link ?

shsagnik said:
It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button
Click to expand...
Click to collapse
Hassan 4 said:
You can flash the latest bootloader from codeworkx dev-host folder, make sure you are in your device folder!
http://d-h.st/users/codeworkx
Click to expand...
Click to collapse
u want me to flash this frm that link >> http://d-h.st/Nfz and also tell me how to flash

daringsmart said:
u want me to flash this frm that link >> http://d-h.st/Nfz and also tell me how to flash
Click to expand...
Click to collapse
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.

shsagnik said:
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.
Click to expand...
Click to collapse
i downloaded 4.2 firmware frm sammobile after flash how do i root it ? and can u send me link of recovery
edit: i could not flash 4.2 firmware :\ pls someone give me a good link

daringsmart said:
i downloaded 4.2 firmware frm sammobile after flash how do i root it ? and can u send me link of recovery
edit: i could not flash 4.2 firmware :\ pls someone give me a good link
Click to expand...
Click to collapse
Try googling the file name

shsagnik said:
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.
Click to expand...
Click to collapse
shsagnik said:
Try googling the file name
Click to expand...
Click to collapse
yes i did but everything same buddy -_- any solution ?

Someone pls help me

daringsmart said:
Someone pls help me
Click to expand...
Click to collapse
Posting the link in 10 mins
_________________________________________________________________________________________________
Here is the link to file you need to flash :-http://www.sammobile.com/firmwares/download/17730/P3100XXDMG6_P3100OXADMG6_XEF/
I am also posting the steps:-
How to Update Galaxy Tab 2 7.0 P3100 to Official JB 4.2.2 XXDMG6 Firmware
Odin can be properly used only if your Galaxy Tab 2 7.0 drivers are being installed on your computer. If the drivers are not there, get them manually or use Samsung KIES.
Download Odin on your computer.
Unzip the file on your PC and install the same.
Also, run Odin on your computer.
Finally, go here and download the Jelly Bean 4.2.2 file.
Place the file on desktop and on the same place unzip the package.
Enter the Tab 2 in download mode.
For download mode first turn off your handset; wait a few seconds and then press on Power, Volume Down and Home buttons at the same time.
Connect your device with the computer via USB cable.
Odin will recognize your tablet and on the program you will see the “added” message displayed and the ID:COM section blue or yellow.
If not, resolve the problems by reinstalling the drivers on the computer.
From Odin click on the option named “PDA”.
Pick the update file from your computer.
The re-partition section and the f. reset time box should be unchecked.
Click on “start”.
The XXDMG6 Firmware will now be installed.
In the end on Odin the ID:COM section will be green and the “pass” message will be displayed.
Then, you will be able to unplug the USB cable; also reboot your device.

shsagnik said:
Posting the link in 10 mins
_________________________________________________________________________________________________
Here is the link to file you need to flash :-http://www.sammobile.com/firmwares/download/17730/P3100XXDMG6_P3100OXADMG6_XEF/
I am also posting the steps:-
How to Update Galaxy Tab 2 7.0 P3100 to Official JB 4.2.2 XXDMG6 Firmware
Odin can be properly used only if your Galaxy Tab 2 7.0 drivers are being installed on your computer. If the drivers are not there, get them manually or use Samsung KIES.
Download Odin on your computer.
Unzip the file on your PC and install the same.
Also, run Odin on your computer.
Finally, go here and download the Jelly Bean 4.2.2 file.
Place the file on desktop and on the same place unzip the package.
Enter the Tab 2 in download mode.
For download mode first turn off your handset; wait a few seconds and then press on Power, Volume Down and Home buttons at the same time.
Connect your device with the computer via USB cable.
Odin will recognize your tablet and on the program you will see the “added” message displayed and the ID:COM section blue or yellow.
If not, resolve the problems by reinstalling the drivers on the computer.
From Odin click on the option named “PDA”.
Pick the update file from your computer.
The re-partition section and the f. reset time box should be unchecked.
Click on “start”.
The XXDMG6 Firmware will now be installed.
In the end on Odin the ID:COM section will be green and the “pass” message will be displayed.
Then, you will be able to unplug the USB cable; also reboot your device.
Click to expand...
Click to collapse
Buddy I downloaded the same file but when I extract it show error

daringsmart said:
Buddy I downloaded the same file but when I extract it show error
Click to expand...
Click to collapse
What's the error message?

Hey author i m using p3100 i want it to safe root with all safe parameters like safe kernel n all??
So help me????

Er. Abhi said:
Hey author i m using p3100 i want it to safe root with all safe parameters like safe kernel n all??
So help me????
Click to expand...
Click to collapse
Tell me what I can do to help you?

Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app

Er. Abhi said:
Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
You don't need to update bootloader if you are on 4.1.2 as it has a lollipop compatible boot loader,
You can get the custom recovery file from here, I am posting of my favorite recovery that is TWRP
Just click here :- TWRP
Of course you need a rooted tab for flashing it, you can just download it to your tab and flash it by using Rashr (it's a app available on playstore, just click on it to go to the google play page to download it) or existing recovery, that you most probably don't have.
And tell me anything else you want, but don't forget to press the thanks button

Er. Abhi said:
Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
shsagnik said:
You don't need to update bootloader if you are on 4.1.2 as it has a lollipop compatible boot loader,
You can get the custom recovery file from here, I am posting of my favorite recovery that is TWRP
Just click here :- TWRP
Of course you need a rooted tab for flashing it, you can just download it to your tab and flash it by using Rashr (it's a app available on playstore, just click on it to go to the google play page to download it) or existing recovery, that you most probably don't have.
And tell me anything else you want, but don't forget to press the thanks button
Click to expand...
Click to collapse
If @Er. Abhi doesn't already have custom recovery installed, he can flash TWRP with Odin or Heimdall. I can confirm the Heimdall will flash the twrp img file.
jrc2

Can u also provide me link frm whr i download firmware for p3100 4.1.2
Official???
Sent from my GT-P3100 using XDA Free mobile app

Er. Abhi said:
Can u also provide me link frm whr i download firmware for p3100 4.1.2
Official???
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
Why you need firmware? Don't you have the 4.1.2 installed?

(Guide) Root Note 3 SM-N900 5.0/Install Recovery

Here is a full guide on how to root and install custom recovery on Galaxy Note 3 N900 Lollipop
(THIS WILL VOIDE WARRENTY,I AM NOT RESPONSIBLE FOR IF YOUR DEVICE BRICKED)
How to do root:
NOTE 1- MAKE SURE YOU DOWNLOAD THE FILE FOR YOU CORRECT ROOT FILES, THE FILES ARE DIFFERENT FOR 4.4.2 AND DIFFERENT FOR 5.0
NOTE 2- IF YOU KNOW YOU WANT TO FLASH A ROM THEN NO NEED TO ROOT YOUR DEVICE, SKIP THIS AND GO TO HOW TO INSTALL CUSTOM RECOVERY!
Step 1)Get the CF root file compatabile to your vairant from here.. http://forum.xda-developers.com/showthread.php?t=2466423
Step 2) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 3) Now open ODIN on your PC and connect your Galaxy Note 3 to your computer.
Step 4) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 5) Click on pda in odin (if odin 3.09 choose AP) and choose the ".tar" file.
Step 6) Tick "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart
How To Install Custom Recovery
Download The Recovery Image You Want
For TWRP:
Download TWRP IMG From Here:
http://dl.twrp.me/ha3g/
(I dont have other recovery img links.. its your homework )
After downloading go to playstore and download :
Flashify: https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
AFter Installing Flashify Open it and grant SuperSu Permission
Then Choose: Recovey Image
Then: Choose A File And browse the twrp.img file you downloaded and Select it and select yup..
It Will Flash TWRP For Your Phone
And Then Select Reboot.. It Will Reboot Into TWRP Recovery
ROCK AND ROLL NOW
Credits:
@CF-Auto-Root
@TWRP Recovery

not working for me,it starts for few second and then i get the message GAIL

shalilou said:
not working for me,it starts for few second and then i get the message GAIL
Click to expand...
Click to collapse
Which Note 3 You Have?
This Method Is Tested In Note N900 Indian Official 5.0

Is there root for Note 3 N900s available?

If you wanna root kitkat its available but if you want rootfor lollipop its not available now... may be out soon.. you can check yourself from cf root website.. only n900s kitkat available
Sent from my SM-N900 using XDA Free mobile app

tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !

Miaow93 said:
tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !
Click to expand...
Click to collapse
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..

dhanmohan said:
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..
Click to expand...
Click to collapse
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP

Miaow93 said:
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP
Click to expand...
Click to collapse
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..

dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god

Miaow93 said:
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god
Click to expand...
Click to collapse
ohh i don't know about cwm as i don't use them

While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app

skssha said:
While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app
Click to expand...
Click to collapse
you mean usb debugging should turn off while installing recovery!

Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.

Prolab said:
Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.
Click to expand...
Click to collapse
Just wondering, has your KNOX been triggered?

Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes rooting device will trigger Knox.. If you want to reset Knox there's a method in general section I guess.. Boot loader but its for kk.. If u flash it,it will cause bootloop can reset Knox then u have to flash stock and u r fully official

Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes, with this method.

help
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop

Mr_Za said:
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop
Click to expand...
Click to collapse
Just download cf root of your version and make sure that cf file is for lollipop of ur note 3 version and follow the process

Thank you I rooted my device successfully

*****Problem with apk*****

Hello
i have an android mobile,which i had rooted and then accidently deleted Package Installer and then i hard reset my mobile.
I cannot install any app also USB computer connectivity not working only can be used for charging.
Please help with this problem.

saqib ullah said:
Hello
i have an android mobile,which i had rooted and then accidently deleted Package Installer and then i hard reset my mobile.
I cannot install any app also USB computer connectivity not working only can be used for charging.
Please help with this problem.
Click to expand...
Click to collapse
What app do you use to uninstall the package installer?
What is your devices?
Need more info..

Moblie app
Thunderoar said:
What app do you use to uninstall the package installer?
What is your devices?
Need more info..
Click to expand...
Click to collapse
I think that was titan backup or super user.

app used for uninstalling package installer
that was i forgot but my mobile is android 4.2.2 with no update option from settings

saqib ullah said:
that was i forgot but my mobile is android 4.2.2 with no update option from settings
Click to expand...
Click to collapse
Do you have any custom recovery? Also which mobile do you have?

custom recovery
aviralrstg said:
Do you have any custom recovery? Also which mobile do you have?
Click to expand...
Click to collapse
No unfortunately i don't have any custom recovery

saqib ullah said:
No unfortunately i don't have any custom recovery
Click to expand...
Click to collapse
Do you have any app installed like Rashr or flashify or flashfire which can be used to flash recovery? Also tell us your mobile like samsung /lg etc. not just android version. You will find this info in Settings>>About.

aviralrstg said:
Do you have any app installed like Rashr or flashify or flashfire which can be used to flash recovery? Also tell us your mobile like samsung /lg etc. not just android version. You will find this info in Settings>>About.
Click to expand...
Click to collapse
No it is hard reseted.No recovery apps
Model Number QMobile A75
Android Version 3.4.5
Software Version A75_MP_140113
also i have it's stock rom(file.rar) on my computer.
Thanks for reply.Kindly help me with s solution

saqib ullah said:
No it is hard reseted.No recovery apps
Model Number QMobile A75
Android Version 3.4.5
Software Version A75_MP_140113
also i have it's stock rom(file.rar) on my computer.
Thanks for reply.Kindly help me with s solution
Click to expand...
Click to collapse
First confirm me is this your device? http://m.gsmarena.com/qmobile_noir_a75-7387.php
If it is your phone, just flash the stock ROM file using SP Flash Tools.Check here for detailed instructions with images on how to use SP Flash Tools:
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
If you successfully flash the stock ROM, your problem would be fixed. But be careful using the software, don't click anywhere if you don't know what it will do.
Make sure the file you have is not corrupted.
If you need to re-download stock ROM file: https://firmwarefile.com/qmobile-a75
Hit thanks if it helped!

aviralrstg said:
First confirm me is this your device? http://m.gsmarena.com/qmobile_noir_a75-7387.php
If it is your phone, just flash the stock ROM file using SP Flash Tools.Check here for detailed instructions with images on how to use SP Flash Tools:
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
If you successfully flash the stock ROM, your problem would be fixed. But be careful using the software, don't click anywhere if you don't know what it will do.
Make sure the file you have is not corrupted.
If you need to re-download stock ROM file: https://firmwarefile.com/qmobile-a75
Hit thanks if it helped!
Click to expand...
Click to collapse
yes this is my mobile i already have its stock rom but by mobile's charging port only can be used for charging,not connecting to computer.is there any other way to flash rom to it or sideload that package installer.

saqib ullah said:
yes this is my mobile i already have its stock rom but by mobile's charging port only can be used for charging,not connecting to computer.is there any other way to flash rom to it or sideload that package installer.
Click to expand...
Click to collapse
Your mobile's port is ok, you will need to install drivers on your computer for it to be able to detect your mobile for flashing the ROM. Unless there is a custom ROM for your device, there us no other way.
Hit thanks if it helped!

I've tried this too but my mobile not connecting through usb my problem is to find a way to install or side load package installer

Sounds like you're rooted... try extracting the package manager apk from a stock zip just placing the files back as they were in your file explorer. You'll have to reboot of course

MelloZ said:
Sounds like you're rooted... try extracting the package manager apk from a stock zip just placing the files back as they were in your file explorer. You'll have to reboot of course
Click to expand...
Click to collapse
Yes it was but now it's unrooted due to hard reseted by mistake.Is there any other solution without using usb mobile port as it is damaged means can only be used for charging .
if(you helped me)
{
Thanks
}
else
Try to help me please

saqib ullah said:
Yes it was but now it's unrooted due to hard reseted by mistake.Is there any other solution without using usb mobile port as it is damaged means can only be used for charging .
if(you helped me)
{
Thanks
}
else
Try to help me please
Click to expand...
Click to collapse
There is a thanks button at every post which increases thanks count of a person on how XDA profile. If you feel a post helped you, you should just hit the button under his post.
The method I told you (to flash stock rom using SP flash tools) can fix even hard bricked phones(when the phone dies,the screen doesn't even turn on). I don't know of any other way to help you since:
1. You don't have a custom recovery.
2. You are not rooted.
3. You can't install any app to root/install custom recovery.
4. You deny to do the only thing that can fix your phone.
Phone USB ports are not damaged easily otherwise you won't be able to even charge.
1. Change your USB cable.
2. Try using another computer(you need a windows PC)
3. Download and install appropriate drivers to your computer.
When I get free time, I will post some links for drivers you can try. If you're not willing to do it, ask a friend to help you or you are on your own, I won't help anymore.