Database Info

How to ROOT GNote N7000 N7000XXLS2 4.1.1

Hello Friend, I need your help too, I'm from Brazil and just upgraded my Galaxy Note N7000 for N7000XXLS2 ROOM 4.1.1, and I wonder if there is already proceeding to ROOT this room.
Remember that I downloaded from this site sammobile.com room. So what procedure should I follow to do or perform root this room? Thank you brother :: D

Root JRO03C.N7000XXLS2
JuniorLima said:
Hello Friend, I need your help too, I'm from Brazil and just upgraded my Galaxy Note N7000 for N7000XXLS2 ROOM 4.1.1, and I wonder if there is already proceeding to ROOT this room.
Remember that I downloaded from this site sammobile.com room. So what procedure should I follow to do or perform root this room? Thank you brother :: D
Click to expand...
Click to collapse
I've tried other root methods the whole afternoon, none of them work yet.
---------- Post added at 08:45 PM ---------- Previous post was at 08:40 PM ----------
toni_gon said:
I've tried other root methods the whole afternoon, none of them work yet.
Click to expand...
Click to collapse
Once ROM'd this cannot be reversed back to ICS. I used Odin to re-flash the ROM to get the SGN to reboot properly. Its fully functional again:fingers-crossed:.

toni_gon said:
I've tried other root methods the whole afternoon, none of them work yet.
---------- Post added at 08:45 PM ---------- Previous post was at 08:40 PM ----------
Once ROM'd this cannot be reversed back to ICS. I used Odin to re-flash the ROM to get the SGN to reboot properly. Its fully functional again:fingers-crossed:.
Click to expand...
Click to collapse
I managed to make the ROOT ... if you want to know how to do is just say that I post here

how can i do that? i am trying this about 2 days and i cannot root it
Sent from my GT-N7000 using xda premium

vasyno1 said:
how can i do that? i am trying this about 2 days and i cannot root it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
just a minute, is that I'm from Brazil and I need to translate to English tutorial for you ok.
Ae ... you will like, it is not difficult the process is fully functional ... just a minute ..

[SIZE="<font><font>6</font></font>"][SIZE="<font><font>7</font></font>"]Performing the Root[/SIZE][/SIZE]
1-Have a micro SD card external memory and copy it to the file Philz Kernel 2.7. He will be key to your handset to work in step 7. Save it to a folder that starts with the letter A to be located more quickly (hint staff);
*
2-Download the Odin 3 v 1.87, unzip and run it. Now go to PDA and locate the file Kernel v5.3 GL Hydracore STD that you've already downloaded. Do not touch any other option Odin PC. Leave everything exactly as it is!
*
3-Turn off your phone (and make sure you have at least 80% battery charge);
*
4-Hold the Power + Home button + volume down to get into Download Mode / Odin Mode. Press the volume up and you're ready to install Kernel v5.3 GL Hydracore STD;
*
5-Connect your device to your computer using the USB cable. (WARNING! If your computer does not recognize your device, download and install Samsung Kies on your computer and then connect your device to have the drivers installed);
*
6-Once the ODIN PC indicate recognition of your device, click Start and NOT UNPLUG YOUR PHONE NO WAY! AVOID USING THE COMPUTER UNTIL THE INSTALLATION WAS DONE;
*
7-Wait for the device to restart. Probably he can not leave the home screen. Do not worry. Turn it off and remove the battery for 1 minute. For some reason I can not explain the GL Hydracore, even v7 is not working on Galaxy Note with Android 4.1.1 stock;
*
8-Now replace the battery and get into Clockworkmod (simultaneously press the Power + Home + Volume Up) and go to "Instal Zip from SD Card" and then "Chose External Zip from SD Card" and select the file Kernel Philz 2.7 CWM you downloaded and saved on your micro SD card. Select it and choose "yes" (Thanks to Junior Lima to discover that step tutorial)
*
8-Wait for the device to restart. Ready to Root and Clockworkmod device.
*
With this procedure you will increase the binary counter and get a yellow triangle every time you start your machine. Do not worry. Download the app Triangle Away v 2.10 and run it.
*
Okay, your system will be as an officer again.

can yoy give me the download links for files?

vasyno1 said:
can yoy give me the download links for files?
Click to expand...
Click to collapse
i used odin pda to install philZ-cwm6-xxls2-xjb-2.7.tar.md5 frm http://forum.xda-developers.com/showthread.php?t=1901191
later i copied Root_SuperSU0.95.Only-Signed to sd card i enteredrecovery mod and install zip from card
@ the end i installed triangle and everything went ok
have fun

rchaker said:
i used odin pda to install philZ-cwm6-xxls2-xjb-2.7.tar.md5 frm http://forum.xda-developers.com/showthread.php?t=1901191
later i copied Root_SuperSU0.95.Only-Signed to sd card i enteredrecovery mod and install zip from card
@ the end i installed triangle and everything went ok
have fun
Click to expand...
Click to collapse
Where did you get this process? I'd rather spend the Odin PDA KERNEL HYDRACORE life .... CWM then passes via the Kernel-PhilZ cwm6 ... was so I could do on my phone!!
Hydracore Kernel: http://forum.xda-developers.com/showthread.php?t=1749863 (V7 may be the same)
Kenel PhilZ-cwm6: http://205.196.121.32/yldwgfctn3vg/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
Running Wipe data factory / wipe cache / wipe dalvik after each flash
Triangle Away .... to remove triangle and binary counter ... (can be found in Google Apps)
has nothing to err .... hug

JuniorLima said:
Where did you get this process? I'd rather spend the Odin PDA KERNEL HYDRACORE life .... CWM then passes via the Kernel-PhilZ cwm6 ... was so I could do on my phone!!
Hydracore Kernel: http://forum.xda-developers.com/showthread.php?t=1749863 (V7 may be the same)
Kenel PhilZ-cwm6: http://205.196.121.32/yldwgfctn3vg/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
Running Wipe data factory / wipe cache / wipe dalvik after each flash
Triangle Away .... to remove triangle and binary counter ... (can be found in Google Apps)
has nothing to err .... hug
Click to expand...
Click to collapse
i ve done it on my n7000 and everything went ok

Strange results
JuniorLima said:
[SIZE="<font><font>6</font></font>"][SIZE="<font><font>7</font></font>"]Performing the Root[/SIZE][/SIZE]
1-Have a micro SD card external memory and copy it to the file Philz Kernel 2.7. He will be key to your handset to work in step 7. Save it to a folder that starts with the letter A to be located more quickly (hint staff);
*
2-Download the Odin 3 v 1.87, unzip and run it. Now go to PDA and locate the file Kernel v5.3 GL Hydracore STD that you've already downloaded. Do not touch any other option Odin PC. Leave everything exactly as it is!
*
3-Turn off your phone (and make sure you have at least 80% battery charge);
*
4-Hold the Power + Home button + volume down to get into Download Mode / Odin Mode. Press the volume up and you're ready to install Kernel v5.3 GL Hydracore STD;
*
5-Connect your device to your computer using the USB cable. (WARNING! If your computer does not recognize your device, download and install Samsung Kies on your computer and then connect your device to have the drivers installed);
*
6-Once the ODIN PC indicate recognition of your device, click Start and NOT UNPLUG YOUR PHONE NO WAY! AVOID USING THE COMPUTER UNTIL THE INSTALLATION WAS DONE;
*
7-Wait for the device to restart. Probably he can not leave the home screen. Do not worry. Turn it off and remove the battery for 1 minute. For some reason I can not explain the GL Hydracore, even v7 is not working on Galaxy Note with Android 4.1.1 stock;
*
8-Now replace the battery and get into Clockworkmod (simultaneously press the Power + Home + Volume Up) and go to "Instal Zip from SD Card" and then "Chose External Zip from SD Card" and select the file Kernel Philz 2.7 CWM you downloaded and saved on your micro SD card. Select it and choose "yes" (Thanks to Junior Lima to discover that step tutorial)
*
8-Wait for the device to restart. Ready to Root and Clockworkmod device.
*
With this procedure you will increase the binary counter and get a yellow triangle every time you start your machine. Do not worry. Download the app Triangle Away v 2.10 and run it.
*
Okay, your system will be as an officer again.
Click to expand...
Click to collapse
I had to use Odin to flash the Philz-cwm6-xxls-x2JB-2.7.tar file as it would not reboot after flashing hydracore. But the root was made with Super SU appearing in the apps drawer.
The second strange thing was no CWM recovery was installed, I had to get it from the play store and use the app to flash CWM.
But it's rooted now.
The next issue seems to be the Supernexus ROM from Faryaab, as it seems to have Build Prop issues.
A luta continua...

One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G

gflyer said:
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
Click to expand...
Click to collapse
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.

toni_gon said:
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
Click to expand...
Click to collapse
I've compared the buildprop files of both ROMS, does anyone know what has to be edited out of the buildprop file of the JB rom to allow installation of the SuperNexus ROM?
Perhaps the Samsung hidden attribs?

toni_gon said:
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
Click to expand...
Click to collapse
is really this room is having trouble working with the Kernel's working with the other's room ... the only room that is working with XXLS2 as I know, is the PhilZ. Regarding Hydracore, friend, we passed this kernel first, to win the CWM machine understand? because from it as we flash the kernel PhilZ ...

gflyer said:
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
Click to expand...
Click to collapse
Me did not work so ... I had to spend the first kernel of Hydracore .... the more strange, is that after flashing the Kernel Hydracore, the device will not turn over ... it shows the screen with the name of N7000 and turn it off ... it will not start. Only after passing the kernel PhilZ the device connects. I can not understand why, but if anyone knows, feel free to tell us .... thanks!!

JuniorLima said:
Me did not work so ... I had to spend the first kernel of Hydracore .... the more strange, is that after flashing the Kernel Hydracore, the device will not turn over ... it shows the screen with the name of N7000 and turn it off ... it will not start. Only after passing the kernel PhilZ the device connects. I can not understand why, but if anyone knows, feel free to tell us .... thanks!!
Click to expand...
Click to collapse
I achieved root in the same way, but could not boot into CWM after installing Hydarcore, I used Odin to flash Philz, after flashing Hydracore. The only remaining issue is to install the custom ROM SuperNexus from Faryaab, I keep getting build prop errors.
I've tried modding the Faryaab buildprop to almost the same as the Sammy XXLS2 and I still have not achieved it...
Anyone have any ideas?

Could this help?
http://forum.xda-developers.com/showpost.php?p=34577056&postcount=2

rchaker said:
i ve done it on my n7000 and everything went ok
Click to expand...
Click to collapse
Got it ... then the two processes work perfectly ... because I ran the process described at the beginning of the post and it worked fine ... Now it's a matter of taste ... even more

full instructions
rchaker said:
i ve done it on my n7000 and everything went ok
Click to expand...
Click to collapse
hi... good day... im planning to root my Galaxy Note running on official XLS2 4.1.1
this is my first time to root my phone and i wanna be sure that im doing it properly...
Could you please give me a step by step instructions as to how to root my phone?
thanks ain advance... and i appreciate your help

P3100 stuck at bootscreen help

Hi,
i was using cm10.1 which was running fine, i reloaded the stock jellybean 4.1.1 and now the tablet wont go beyond the flashing samsung boot screen?
i tried going back to ICS 4.0.4
I loaded these via the odin method, what i need is cwm but the tablet is stuck at the bootscreen, any kind person out there get any ideas what i can do
thanks
gazmon

I got the same problem with u~"~
I didn't flash anything but it stucks at that bootscreen.
I can enter download mode but not cmw also
How can we do....~"~

SAMHUI94 said:
I got the same problem with u~"~
I didn't flash anything but it stucks at that bootscreen.
I can enter download mode but not cmw also
How can we do....~"~
Click to expand...
Click to collapse
Sorted it now
If stuck at bootscreen turn off device, then hold power button and volume up to enter standard android recovery mode, then select clear dalvic and clear cache, reboot and that sorted it

i discovered that i can enter cwm recovery
But i made a full wipe, it still doesn't help.
Do i need to flash in offical rom?? Where can i find hk's rom??
Thx and please help

SAMHUI94 said:
i discovered that i can enter cwm recovery
But i made a full wipe, it still doesn't help.
Do i need to flash in offical rom?? Where can i find hk's rom??
Thx and please help
Click to expand...
Click to collapse
If you still have CWM recovery, then your attempt to ODIN the stock ROM did not work.
What version CWM do you have?
Find the stock ROMs here, but make sure your model is p3100 not P3113 or similar.
http://www.sammobile.com/firmware/?page=3&model=GT-P3113&pcode=0&os=1&type=3#firmware

DigitalMD said:
If you still have CWM recovery, then your attempt to ODIN the stock ROM did not work.
What version CWM do you have?
Find the stock ROMs here, but make sure your model is p3100 not P3113 or similar.
http://www.sammobile.com/firmware/?page=3&model=GT-P3113&pcode=0&os=1&type=3#firmware
Click to expand...
Click to collapse
I didn't use ODIN to recover. I just had a full wipe but it doesn't work.
I am having CWM on V6.0.1.0
Is the following process correct?
Open Odin-> Tablet in download mode-> Connect-> Choose the downloaded zip in PDA column
THX !!!

SAMHUI94 said:
I didn't use ODIN to recover. I just had a full wipe but it doesn't work.
I am having CWM on V6.0.1.0
Is the following process correct?
Open Odin-> Tablet in download mode-> Connect-> Choose the downloaded zip in PDA column
THX !!!
Click to expand...
Click to collapse
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5

DigitalMD said:
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5
Click to expand...
Click to collapse
Thx for your kindly help!
I will do this after i charged my tab2.
Hope I can boot my tab
---------- Post added at 01:42 AM ---------- Previous post was at 12:48 AM ----------
DigitalMD said:
almost
you can;'t use a zip file in odin
you have to extract the contents and point to the .tar.md5 file
example P3100ZTOLP3_P3100UBLP7_HOME.tar.md5
Click to expand...
Click to collapse
I succeed!!! Thx:good:
One more question here
Can I upgrade the android version by using odin with newest firmware?
Thats using 4.1 firmware with the same method I've done.
Sorry for my poor english.

(Guide) How to root Samsung Galaxy Tab 3 SM-T111

How to root Samsung Galaxy Tab 3 Neo (Lite) SM-T111 (7.0 inch)
Just couple of days back I have made Prerooted Dr.Ketan custom ROM and many user asking about how to root SM-T111 so here describing simple method about how to root SM-T111.
1.Download tar version of SM-T110 TWRP which is working fine on T111. Here is original thread and you have to download This one. (select tar version NOT flashablbe zip). Thank to @gr8nole
2.Extract that recovery to get recovery.tar.md5
3.Flash this extracted file with Odin (PDA/AP tab)
4.Download SuperSU.zip and here is original thread of SuperSu by chainfire if you needs further info about SuperSU
5.Copy downloaded SuperSu file to Sd card
6.Reboot to recovery (Vol up+power+home)
7.select SuperSu zip and flash
Done !

Model number SM-T111M
Android version 4.2.2
Baseband version T111MUBUANB3
Kernel versiom 3.4.5-2531780
will it work?

Some problem
Model number SM-T111
Android version 4.2.2
Baseband version T111XXUANAC
Kernel versiom 3.4.5-2449362
Status TESTED ! AND WORK BUT STILL LOOP ON TWRP
usb debuger is on (before 2nd reset after installing superSU)
and now "adb" never detect my tab...cant use any adb command....
tested 2 time root 2 time stock recovery....
any idea ?
(i know my bad english but u surely understand i think)

Thanks
I'm Ok
Sent from my SM-T111

how to enter stock recovery in sm t111
I tried various button combo's, , home+ power, etc. screen blink tablet shut down

Switch of device
Press power +volume up +home
Once you see Samsung text logo on screen release power and keep holding other 2 button.
It will boot to recovery.
For download mode same way but use volume down in place of volume up.
Sent from my SM-N900 using xda premium

Please help.
I'm stuck on boot loop in recovery, nothing it's working, everything I do(charge, reboot system) the tablet it's entering recovery mode. How can I put the stock recovery or anything else? Thankyou
Edit: dw stock recovey from here and flash again with odin, now it's booting
There is a bug: after flash super su, install back stock recovery and it's ok
Edit: Samsung GALAXY Tab3 Lite 7.0 3G SM-T111 Stock firmware for Romania

dr.ketan said:
Switch of device
Press power +volume up +home
Once you see Samsung text logo on screen release power and keep holding other 2 button.
It will boot to recovery.
For download mode same way but use volume down in place of volume up.
Note: don't reboot to recovery mode , if you want to recovery mode just turn off and use power + vol up + home
Click to expand...
Click to collapse

Multi Window files needed!!!!!!!!
dr.ketan said:
How to root Samsung Galaxy Tab 3 Neo (Lite) SM-T111 (7.0 inch)
Just couple of days back I have made Prerooted Dr.Ketan custom ROM and many user asking about how to root SM-T111 so here describing simple method about how to root SM-T111.
1.Download tar version of SM-T110 TWRP which is working fine on T111. Here is original thread and you have to download This one. (select tar version NOT flashablbe zip). Thank to @gr8nole
2.Extract that recovery to get recovery.tar.md5
3.Flash this extracted file with Odin (PDA/AP tab)
4.Download SuperSU.zip and here is original thread of SuperSu by chainfire if you needs further info about SuperSU
5.Copy downloaded SuperSu file to Sd card
6.Reboot to recovery (Vol up+power+home)
7.select SuperSu zip and flash
Done !
Click to expand...
Click to collapse
Hello Dr.Ketan
i'm a beginner developer
i need a few files from tab 3 7 neo for porting multi window to various devices
if ur support is with me then please reply
or anyone else seeing this message would like to help that would be great

Hi everybody,
I'm trying to root my T111 just updated with the latest official Samsung firmware (Sept 2014), now I correctly flashed recovery through Odin, but when I enter CWM and select supersu.zip to install it, it returns signature error...
Could it be related to the latest official rom?
Do I need a different supersu package (I downloaded the latest)?
I tried do download it few times, thinking about a corrupted zip, but it's intact...
Thanks in advance.
Danilo
EDIT: I follow xda since 2008, first post 6 years later...

Post screenshot of your recovery
Sent from my SM-N900 using xda premium

dr.ketan said:
Post screenshot of your recovery
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
Took it from web, but this is exactly what I get.
Thanks for helping me, ketan. :good:

Your recovery seems stock only.
Sent from my SM-N900 using xda premium

dr.ketan said:
Your recovery seems stock only.
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
Really?!
Odin said it worked...
By the way, I try again, should TWRP.2.7.0.1 and the latest Supersu work?
Thanks again.
P.S.: ketan, are you working on a new rom on this device? I'd like to have a clean naked one...

donehello said:
Really?!
Odin said it worked...
By the way, I try again, should TWRP.2.7.0.1 and the latest Supersu work?
Thanks again.
P.S.: ketan, are you working on a new rom on this device? I'd like to have a clean naked one...
Click to expand...
Click to collapse
Use twrp one I have said in op.
I am busy with other development and no any plan to update rom for this device. One is based on previous version is there on Dev section. Basically this is not my primary device but only gaming device for my little kid. If I make any new version then will post in dev section.
Sent from my SM-N900 using xda premium

dr.ketan said:
Use twrp one I have said in op.
I am busy with other development and no any plan to update rom for this device. One is based on previous version is there on Dev section. Basically this is not my primary device but only gaming device for my little kid. If I make any new version then will post in dev section.
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
I know who you are ketan, already seen that thread, and that is not your primary device (actually is not my primary too).
Thanks for your help, I did something wrong while rooting, I did it again and worked fine...
Thanks again.
All the best. :good:

All The Steps Followed But At The End , It's not booting in recovery .
dr.ketan said:
How to root Samsung Galaxy Tab 3 Neo (Lite) SM-T111 (7.0 inch)
Just couple of days back I have made Prerooted Dr.Ketan custom ROM and many user asking about how to root SM-T111 so here describing simple method about how to root SM-T111.
1.Download tar version of SM-T110 TWRP which is working fine on T111. Here is original thread and you have to download This one. (select tar version NOT flashablbe zip). Thank to @gr8nole
2.Extract that recovery to get recovery.tar.md5
3.Flash this extracted file with Odin (PDA/AP tab)
4.Download SuperSU.zip and here is original thread of SuperSu by chainfire if you needs further info about SuperSU
5.Copy downloaded SuperSu file to Sd card
6.Reboot to recovery (Vol up+power+home)
7.select SuperSu zip and flash
Done !
Click to expand...
Click to collapse
Hello , I got a Galaxy Tab 3 Neo (SM-T111) , I followed your process for rooting my device , all steps followed and were going correct and i flashed recovery.tar.md5 file via odin but the problem is after flashing , and pressing power+vol up+home , I can't boot in recovery , I also left the power button when logo appears , but it goes black . And once it went to stock recovery I think and there were 2 error's (No Command and then simply Error) . Please a quick and fast answer will be thankfull.
Thanks in advance ,
[H]a!cON-

You can repeat procedure. Make sure you are downloading correct version as said in op.
Sent from my SM-N900 using xda premium

Can't boot in to recovery .
dr.ketan said:
How to root Samsung Galaxy Tab 3 Neo (Lite) SM-T111 (7.0 inch)
Just couple of days back I have made Prerooted Dr.Ketan custom ROM and many user asking about how to root SM-T111 so here describing simple method about how to root SM-T111.
1.Download tar version of SM-T110 TWRP which is working fine on T111. Here is original thread and you have to download This one. (select tar version NOT flashablbe zip). Thank to @gr8nole
2.Extract that recovery to get recovery.tar.md5
3.Flash this extracted file with Odin (PDA/AP tab)
4.Download SuperSU.zip and here is original thread of SuperSu by chainfire if you needs further info about SuperSU
5.Copy downloaded SuperSu file to Sd card
6.Reboot to recovery (Vol up+power+home)
7.select SuperSu zip and flash
Done !
Click to expand...
Click to collapse
All steps followed correctly but when after falshing recovery.tar.md5 when i try to boot into recovery it shows up the logo then i remove my finger from power button then the screen goes black . Please Help !
Model - Galaxy Tab 3 Neo (Sm-T111)
Kerlel Version - 3.4.5-2698417
Baseband Version - T111XXUANF3.
Thanks in advance .
[H]a!cON-
---------- Post added at 03:36 PM ---------- Previous post was at 03:31 PM ----------
[email protected] said:
Hello , I got a Galaxy Tab 3 Neo (SM-T111) , I followed your process for rooting my device , all steps followed and were going correct and i flashed recovery.tar.md5 file via odin but the problem is after flashing , and pressing power+vol up+home , I can't boot in recovery , I also left the power button when logo appears , but it goes black . And once it went to stock recovery I think and there were 2 error's (No Command and then simply Error) . Please a quick and fast answer will be thankfull.
Thanks in advance ,
[H]a!cON-
Click to expand...
Click to collapse
I downloaded T110.CMW.v6.0.4.8.tar.md5 and flashed , not working !
Model - Galaxy Tab 3 Neo (Sm-T111)
Kerlel Version - 3.4.5-2698417
Baseband Version - T111XXUANF3.
Thanks in advance .
[H]a!cON-

I said to use twrp not cwm
Sent from my SM-N900 using xda premium

S6 bricked after root, tried everything

Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9, kies and smart switch (which says my device is not supported)
What can i do now?
Please help me

Speed™ said:
Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9 kies and smart switch (which says my devie is not supported.
What can i do now?
Please help me
Click to expand...
Click to collapse
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?

Faspaiso said:
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?
Click to expand...
Click to collapse
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode

Speed™ said:
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode
Click to expand...
Click to collapse
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.

I will try it. I'm downloading the firmware right now (so slow)
Is there any way to turn off the phone? I hope it won0t suffer burn in effect because of the static image.

Faspaiso said:
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.
Click to expand...
Click to collapse
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?

Speed™ said:
I did exactly what you said but nothing. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''

afehst said:
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''
Click to expand...
Click to collapse
I don't think i would help because i neither flashed the firmware. Anyway thanks

Speed™ said:
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?

Faspaiso said:
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?
Click to expand...
Click to collapse
I was on 5.0.2.
I used odin 3.10.6, clicked on AP, swlected the TAR file then clicked start. Everything goes OK until the end when odin displays FAIL. Really dunno what problem coulb be

Bring your S6 back to Samsung for warranty repair.

What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app

Cyanandroid said:
What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I can,t access to recovery but can access to odin mode (download mode)

Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Sent from my A0001 using XDA Free mobile app
---------- Post added at 06:42 AM ---------- Previous post was at 06:40 AM ----------
If not then just download the samsung galaxy stock rom zip amd flash it using philz.U can also root ur system using philz recovery as it has an built in rooting option...
Hope it helps
Sent from my A0001 using XDA Free mobile app

Speed™ said:
I can,t access to recovery but can access to odin mode (download mode)
Click to expand...
Click to collapse
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
Cyanandroid said:
Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Click to expand...
Click to collapse
He is simply asking for help. How should he know?

Faspaiso said:
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
He is simply asking for help. How should he know?
Click to expand...
Click to collapse
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.

Try flashing philz recovery.i actually prefer it.
Sent from my A0001 using XDA Free mobile app

Speed™ said:
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.
Click to expand...
Click to collapse
Well if you succesfully flash 5.1.1 your phone works again. No idea what's wrong with your Odin tho. Try delete all the Odin files and download it again (https://www.androidfilehost.com/?fid=95916177934555153).
I THINK you're on 5.1.1 bootloader and modem as I got the same error as you. I flashed 5.1.1 bootloader and modem and could not start phone before 5.1.1 firmware was flashed.
You COULD try follow this again STEP FOR STEP when re-downloaded Odin (and deleted all the old Odin files). http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3 REMEMBER to download the right version for your device. Like if you have SM-G920F it's JUST below the guide, else scroll further. Remember the bootloader and modem should be flashed at the SAME time and is not for the PDA slot. If it succesfully flash them, then try 5.1.1 stock firmware now.
But step for step the guide and be aware of those (DO NOT connect your phone before this step, otherwise it won't work!).
If you don't want to try that all over again (as I THINK you're on 5.1.1 bootloader and modem) you could try download download Odin again (as linked) and try different USB ports + PC's. If you try to flash bootloader + modem again, then try different PC's and USB ports too.

Wait wait guys... I just flashed a newer versione of twrp (
Why the hell i was flashing an older version??? ) and BOOM...it restarted and surprise...5.1.1 upgrade with my data and files (nothing touched and deleted).
I can't figure it out why root on 5.0.2 didn't work...
Finally i got it back working at least.
Thank you guys form you quick support and thank you Faspaiso for the help
Btw, root on 5.1.1 not already available?

Smells like reactivation lock.

Samsung galaxy s6 stuck in bootloop SM-920F

I have recently rooted my Galaxy S6 rooted it succesfully,Then I flashed TWRP with Flashify.The app wanted me to restart the phone..I restarted it, and it got stuck in a bootloop,phone doesnt want to turn on nor off (or maybe I don't know how). I tried to connect it with usb on laptop but it wont connect (odin doesn't recognize him).
Could you please help me,step by step ? I googled but couldn't find solution. Please I'm desperate

Update I got it into download mdoe

Benjamin042 said:
I have recently rooted my Galaxy S6 rooted it succesfully,Then I flashed TWRP with Flashify.The app wanted me to restart the phone..I restarted it, and it got stuck in a bootloop,phone doesnt want to turn on nor off (or maybe I don't know how). I tried to connect it with usb on laptop but it wont connect (odin doesn't recognize him).
Could you please help me,step by step ? I googled but couldn't find solution. Please I'm desperate
Click to expand...
Click to collapse
flash twrp using odin, and reboot your phone.

Siddheshpatil said:
flash twrp using odin, and reboot your phone.
Click to expand...
Click to collapse
You mean after I install firmware from sammobile ?

Benjamin042 said:
You mean after I install firmware from sammobile ?
Click to expand...
Click to collapse
you can flash firmware from sammobile. or you can directly flash twrp using odin right now.

Siddheshpatil said:
you can flash firmware from sammobile. or you can directly flash twrp using odin right now.
Click to expand...
Click to collapse
Does it matter how I rooted phone ? I did it with s6_unibase_bog8_v2.tar ?
Where should I download TWRP FROM ? twrp. m e /devices/samsunggalaxys6.html is this ok (and latest available version ?
I'm sorry I am such a noob.
Thank you for your help

Benjamin042 said:
Does it matter how I rooted phone ? I did it with s6_unibase_bog8_v2.tar ?
Where should I download TWRP FROM ? twrp. m e /devices/samsunggalaxys6.html is this ok (and latest available version ?
I'm sorry I am such a noob.
Thank you for your help
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BybHP3qhaGrmd04yQ2NxR3ZxWk0/view?usp=sharing
Here this should work. Flash it via odin, your device should boot into recovery after flashing this, then select reboot in recovery (reboot system). Wait for the phone to boot. (wait for like 15 mins - 20 mins max).
If it does not boot then flash stock firmware from sammobile and after booting, you can root it using unibase (like you did) and then flash twrp via odin.
Don't be sorry. Every pro was a noob once.

Flash all cache dosnt work use aother kernel

Siddheshpatil said:
Here this should work. Flash it via odin, your device should boot into recovery after flashing this, then select reboot in recovery (reboot system). Wait for the phone to boot. (wait for like 15 mins - 20 mins max).
If it does not boot then flash stock firmware from sammobile and after booting, you can root it using unibase (like you did) and then flash twrp via odin.
Don't be sorry. Every pro was a noob once.
Click to expand...
Click to collapse
I tried to follow one video from yt ,but it couldn't boot,so I flashed firmware and it didn't erased important data and phone is still rooted. Should I wipe all data ? I'm still planing to put some rom on it .
Do you mind if I pm you ?
Oh,and yes do I need to unlock bootloader ?

tazaga said:
Flash all cache dosnt work use aother kernel
Click to expand...
Click to collapse
Thank you,I alredy found solution

Benjamin042 said:
I tried to follow one video from yt ,but it couldn't boot,so I flashed firmware and it didn't erased important data and phone is still rooted. Should I wipe all data ? I'm still planing to put some rom on it .
Do you mind if I pm you ?
Oh,and yes do I need to unlock bootloader ?
Click to expand...
Click to collapse
If you are able to boot and if you have root then flash twrp via odin, wait for the phone to boot into twrp and then reboot the device from recovery. Then you can flash roms. You don't need to unlock the bootloader.