Database Info

[CWM]Samsung Galaxy Y (ALPHA)

I have tried my best to make it work but I am not able to figure-out what is wrong with it.
I am able to boot into CWM but it is not performing functions like backup,restore,mount,system,etc.
But you can download the attached zip place it in the root of your SD-CARD and flash it from recovery.
After you fla**** with stock recovery, it will automatically OPEN CWM recovery.
You can scroll with volume buttons and center button to select and power button to go back.
But after reboot it will when you press power+volume up+centre it will boot in stock samsung recovery.
After you flash it you can also use ROM MANAGER and press Reboot into Recovery to boot in CWM Recovery.
It will not hurt your phone but i am not responsible for any harm to your phone.
Any help is appreciated.
EDIT: My recovery is not working. Use this recovery by Skin1980: www.multiupload.com/IGKG2L5RAF

Why is this in the Questions and Answers section?

Because I want help in making it stable.

I am not a developer.
But.. Galaxy 5's recovery works(for me atleast) on Galaxy Y, so you might wanna have a look at its code, it can not mount though.. and it also is overwritten or something and everytime I use ROM manager to boot up n CWM it gets replaced again(same as u said in short).
P.S. 'Thanks' for trying.

still wait to finish.i vote you

I expect this was a long time, trying out many more of you, I voted you

install CMW recovery on Galaxy Y [ TESTED ]
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....

ankit024 said:
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....
Click to expand...
Click to collapse
give me some pic plz.

Hi,
This CWM recovery if for 2.3.5(i forgot the build no)? or 2.3.6(DKK4 which I have)?
can somebody post a normalboot.img of this?
many thanks!

im waiting for work n the stable one!! keep posting guyss!!!

great work.. waiting fr full working beta release

I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
http://www.multiupload.com/48YV5Z4YLQ
Flash it with Odin.... in the PDA field
Report me ASAP

Skin1980 said:
I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
http://www.multiupload.com/48YV5Z4YLQ
Flash it with Odin.... in the PDA field
Report me ASAP
Click to expand...
Click to collapse
does it works for all firmware?tell as more about it please

Skin1980 said:
I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
Flash it with Odin.... in the PDA field
Report me ASAP
Click to expand...
Click to collapse
failed in flashing progress
i think this because s5360 can't install one-package firmware

anyone try successful??

failed also, i am using cygwin to recompile it as .tar
but it still says the same thing..
i thought the one package is already solved there was a blog who made that post about flashing in one package.

ankit024 said:
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....
Click to expand...
Click to collapse
Yeah but the backup and restore is not functional... It dont recognize /data between making backup so on the end it dont make md5 sum and thats al... unuseable recovery...

vndlsm said:
failed also, i am using cygwin to recompile it as .tar
but it still says the same thing..
i thought the one package is already solved there was a blog who made that post about flashing in one package.
Click to expand...
Click to collapse
unfortunately its not solved!its theoriticaly but it does not work!i wish someone could find a solution to one package flash!

If there's somebody that can do the tester please write to me... i haven't this phone but i'm pretty sure that i can solve this in few time
Inviato dal mio GT-I9100 usando Tapatalk

Skin1980 said:
If there's somebody that can do the tester please write to me... i haven't this phone but i'm pretty sure that i can solve this in few time
Inviato dal mio GT-I9100 usando Tapatalk
Click to expand...
Click to collapse
I have tried to flash it with ODIN but it failed then I made an update.zip package with your recovery but after flashing it soft-bricked my phone.
I think something is wrong with the recovery you should fix it.
I can test these recoveries for you but since I am going out for holiday for 10 days sometime I may not test it instantly.
Thanks for your participation in development for this phone.

[GUIDE]Flashing Stock Firmware(Getting Warranty Back)

FLASHING STOCK FIRMWARE (WITH VIDEO)
Hey guys many a times by flashing and modding your device there is very huge risk of SOFT BRICKING your device.Recently i flashed Beats Audio mod on my device and after flashing the mod i got no sound from the device, in these cases flashing stock firmware can be of great use. Or even if you want your warranty back you can use this method. Thjere is already an guide by Omkar$ on same topic but in this guide i will also be posting a video. All credits go to Omkar$.
Things Required
1) ODIN 3.07
2) Samsung USB Drivers
3) Stock firmware(In Second Post)
4)USB Cable
5)Your Galaxy Core
Attention Before Flashing
1)Make Sure Battery Is ABOVE 30%
2)DON'T UNPLUG the Cable During Flashing
3)Follow Procedure Carefully Flashing Right Files
4)No Nuclear War Is Going On
5)Any Other Problem PM me
Let's Begin
1)Install Samsung Drivers On Your PC
2)Reboot Your PC
3)Download The ODIN 3.07 From the link Above And Extract it.
4)Download The Firmware From Below(2nd Post)
5)Extract The Firmware
6)Turn Off Your Galaxy Core
7)Boot your Galaxy Core into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
8)Now Booting You into the DOWNLOAD mode you will get the warning. Press VOLUME UP TO CONTINUE
9)Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10)When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11)click on PDA button && select the Gt-i8262XXXXXX_i8262XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12) now click on "START" button & it will take 10 minutes to flash the firmware ....
DON"T INTERRUPT THE FLASHING PROCESS OR U MAY BRICK YOUR DEVICE
13) U will see a "PASS" & "RESET" on ODIN application...
14)Kudos You Have The Factory Firmware
Problem's Which Can Occur During Flashing
Q)ODIN GOT STUCK DURING FLASHING??
A)ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
Q2) If your device gets a Boot Loop [ boot animation agian & agian ] ??
A)ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
ANY OTHER PROBLEM PM ME
SUUGESTION BEFORE FLASHING
You may want to backup all of your application by Using Either TITANIUM BACKUP or by APP BACKUP AND RESTORE. Because after flashing the stock firmware your all data and applications will be formatted.
Thanks AND Credit TO
1)Omkar$
2)You People For Trying
3)Internet
VIDEO
As Promised Guys The Video Is Ready Do Like This Video
LIKE
COMMENT
SUBSCRIBE!
DONT SHOW IT MEAN IT PRESS THANKS

Reserved
Here Are The Links Enjoy
First Link(All Countries)
Second Link(All Countries)
(UPDATED) 3rd Link(All Countries)
PRESS THANKS IF I HAVE HELPED

Reserved Again
Reserved Again For Future Purpose

Please update stock rom for india to i8262xxbmj5. Thank u
Sent from my GT-I8262 using XDA Premium 4 mobile app

pratik_vartak said:
Please update stock rom for india to i8262xxbmj5. Thank u
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
All the firmwares are posted by Sampro.pl and samfirmware so i can't help until they post the new firmware. As soon as the latest firmwares will be posted i will update u...
Why So Serious?!

How do i see out of wich country my phone is??? :I8262JVAMG2...changelist1378515 date is Mon Aug 25 15:08:56 KST 2013 PLEAAASE HELP MR I WANT MY STOCK ROM BACK:crying:

YouWillnEvErKnOw said:
How do i see out of wich country my phone is??? :I8262JVAMG2...changelist1378515 date is Mon Aug 25 15:08:56 KST 2013 PLEAAASE HELP MR I WANT MY STOCK ROM BACK:crying:
Click to expand...
Click to collapse
Flash Any firmware all would work....
Sent from my GT-I8262 using XDA Premium 4 mobile app

Will the tutorial work with i8260? I got bloatet fw from my carrier...

thecoreguy said:
FLASHING STOCK FIRMWARE (WITH VIDEO)
Hey guys many a times by flashing and modding your device there is very huge risk of SOFT BRICKING your device.Recently i flashed Beats Audio mod on my device and after flashing the mod i got no sound from the device, in these cases flashing stock firmware can be of great use. Or even if you want your warranty back you can use this method. Thjere is already an guide by Omkar$ on same topic but in this guide i will also be posting a video. All credits go to Omkar$.
Things Required
1) ODIN 3.07
2) Samsung USB Drivers
3) Stock firmware(In Second Post)
4)USB Cable
5)Your Galaxy Core
Attention Before Flashing
1)Make Sure Battery Is ABOVE 30%
2)DON'T UNPLUG the Cable During Flashing
3)Follow Procedure Carefully Flashing Right Files
4)No Nuclear War Is Going On
5)Any Other Problem PM me
Let's Begin
1)Install Samsung Drivers On Your PC
2)Reboot Your PC
3)Download The ODIN 3.07 From the link Above And Extract it.
4)Download The Firmware From Below(2nd Post)
5)Extract The Firmware
6)Turn Off Your Galaxy Core
7)Boot your Galaxy Core into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
8)Now Booting You into the DOWNLOAD mode you will get the warning. Press VOLUME UP TO CONTINUE
9)Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10)When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11)click on PDA button && select the Gt-i8262XXXXXX_i8262XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12) now click on "START" button & it will take 10 minutes to flash the firmware ....
DON"T INTERRUPT THE FLASHING PROCESS OR U MAY BRICK YOUR DEVICE
13) U will see a "PASS" & "RESET" on ODIN application...
14)Kudos You Have The Factory Firmware
Problem's Which Can Occur During Flashing
Q)ODIN GOT STUCK DURING FLASHING??
A)ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
Q2) If your device gets a Boot Loop [ boot animation agian & agian ] ??
A)ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
ANY OTHER PROBLEM PM ME
SUUGESTION BEFORE FLASHING
You may want to backup all of your application by Using Either TITANIUM BACKUP or by APP BACKUP AND RESTORE. Because after flashing the stock firmware your all data and applications will be formatted.
Thanks AND Credit TO
1)Omkar$
2)You People For Trying
3)Internet
VIDEO
For You People I will make a video on how you can install The STock Firmware.Stay Tuned
DONT SHOW IT MEAN IT PRESS THANKS
Click to expand...
Click to collapse
after fashing with cm 11....is there any possibilty to support my galaxy core otg

viru94 said:
after fashing with stock.rom.....is there any possibilty to support my galaxy core otg
Click to expand...
Click to collapse
No you need New Kernel Fir That...
Sent from my GT-I8262 using XDA Premium 4 mobile app

rzepa90 said:
Will the tutorial work with i8260? I got bloatet fw from my carrier...
Click to expand...
Click to collapse
Instead Of Using Files For Galaxy Core DUOS USE FULE FOR GALAXY CORE and the rest flashing procedure would be same :v
Sent from my GT-I8262 using XDA Premium 4 mobile app

will there be ota updates now
Sent from my GT-I8262 using XDA Free mobile app

CM11 KitKat ROM
After flashing CM11 KitKat ROM, my phone no longer works, sdcard not detected, no camera app, gallery not working as well. I can't use my phone. Hopefully flashing the stock firmware via Odin will save my phone. I'm downloading the stock firmware as of this writing, thanks for the link, download speed is fast. I'm from Philippines, does it matter if I flash the stock ROM for India?
Downloading the stock ROM for Philippines is taking a lot of time.
I'll get back to you after I flash the stock ROM for India.
---------- Post added at 11:56 AM ---------- Previous post was at 11:04 AM ----------
mightyj0e said:
After flashing CM11 KitKat ROM, my phone no longer works, sdcard not detected, no camera app, gallery not working as well. I can't use my phone. Hopefully flashing the stock firmware via Odin will save my phone. I'm downloading the stock firmware as of this writing, thanks for the link, download speed is fast. I'm from Philippines, does it matter if I flash the stock ROM for India?
Downloading the stock ROM for Philippines is taking a lot of time.
I'll get back to you after I flash the stock ROM for India.
Click to expand...
Click to collapse
I successfully flashed the stock ROM, now it stuck on Samsung Logo. it's been 5 minutes now.

thecoreguy said:
Flash Any firmware all would work....
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You mean flashing any firmware in any country will not change the devices language cause I know 2 languages only.

mightyj0e said:
After flashing CM11 KitKat ROM, my phone no longer works, sdcard not detected, no camera app, gallery not working as well. I can't use my phone. Hopefully flashing the stock firmware via Odin will save my phone. I'm downloading the stock firmware as of this writing, thanks for the link, download speed is fast. I'm from Philippines, does it matter if I flash the stock ROM for India?
Downloading the stock ROM for Philippines is taking a lot of time.
I'll get back to you after I flash the stock ROM for India.
---------- Post added at 11:56 AM ---------- Previous post was at 11:04 AM ----------
I successfully flashed the stock ROM, now it stuck on Samsung Logo. it's been 5 minutes now.
Click to expand...
Click to collapse
Bro you have been in bootloop....switch off your phone...go to recovery mode...wipe data and wipe cache. ...then reboot...it will definitely start
Sent from my GT-I8262 using XDA Premium 4 mobile app

mightyj0e said:
After flashing CM11 KitKat ROM, my phone no longer works, sdcard not detected, no camera app, gallery not working as well. I can't use my phone. Hopefully flashing the stock firmware via Odin will save my phone. I'm downloading the stock firmware as of this writing, thanks for the link, download speed is fast. I'm from Philippines, does it matter if I flash the stock ROM for India?
Downloading the stock ROM for Philippines is taking a lot of time.
I'll get back to you after I flash the stock ROM for India.
---------- Post added at 11:56 AM ---------- Previous post was at 11:04 AM ----------
I successfully flashed the stock ROM, now it stuck on Samsung Logo. it's been 5 minutes now.
Click to expand...
Click to collapse
Bro, I'm from the Philippines and I too am wondering if any of the firmwares for Core would work. As of now I'm trying to download the core's firmware for another country.
Sent from my GT-I8262 using XDA Premium 4 mobile app

Hi Im just confused I bought my Galaxy Core GTI8262 in Saudi Arabia and Im in Philippines right now. Should I download and use the stock firmware from Saudi Arabia or should I just use the one from the Philippines. Does it does an effect from my phone to use either of any of the stock firmware. Its just confusing can u help me pls. Thanks.

are you moved to philippines or just on vacation?
if you moved, i suggest you to use philippines firmware and flash it via odin
--------------------------
Device:
-Galaxy Core Duos [GT-I826]
SetUp:
-SaMyKat v2 ROM
-Infinity Kernel
-TweakDrypt

LoneVipers said:
are you moved to philippines or just on vacation?
if you moved, i suggest you to use philippines firmware and flash it via odin
--------------------------
Device:
-Galaxy Core Duos [GT-I826]
SetUp:
-SaMyKat v2 ROM
-Infinity Kernel
-TweakDrypt
Click to expand...
Click to collapse
Ok I got it. I will be downloading the firmware from the Philippines.
My only question now is what is the difference of this two firmwares of Galaxy CORE GT-I8262 from Philippines
Philippines (Globe) - GLB
Philippines (Open Line) - XTC
So that i wont mess up with my phone if things got wrong

thecoreguy said:
FLASHING STOCK FIRMWARE (WITH VIDEO)
Hey guys many a times by flashing and modding your device there is very huge risk of SOFT BRICKING your device.Recently i flashed Beats Audio mod on my device and after flashing the mod i got no sound from the device, in these cases flashing stock firmware can be of great use. Or even if you want your warranty back you can use this method. Thjere is already an guide by Omkar$ on same topic but in this guide i will also be posting a video. All credits go to Omkar$.
Things Required
1) ODIN 3.07
2) Samsung USB Drivers
3) Stock firmware(In Second Post)
4)USB Cable
5)Your Galaxy Core
Attention Before Flashing
1)Make Sure Battery Is ABOVE 30%
2)DON'T UNPLUG the Cable During Flashing
3)Follow Procedure Carefully Flashing Right Files
4)No Nuclear War Is Going On
5)Any Other Problem PM me
Let's Begin
1)Install Samsung Drivers On Your PC
2)Reboot Your PC
3)Download The ODIN 3.07 From the link Above And Extract it.
4)Download The Firmware From Below(2nd Post)
5)Extract The Firmware
6)Turn Off Your Galaxy Core
7)Boot your Galaxy Core into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
8)Now Booting You into the DOWNLOAD mode you will get the warning. Press VOLUME UP TO CONTINUE
9)Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10)When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11)click on PDA button && select the Gt-i8262XXXXXX_i8262XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12) now click on "START" button & it will take 10 minutes to flash the firmware ....
DON"T INTERRUPT THE FLASHING PROCESS OR U MAY BRICK YOUR DEVICE
13) U will see a "PASS" & "RESET" on ODIN application...
14)Kudos You Have The Factory Firmware
Problem's Which Can Occur During Flashing
Q)ODIN GOT STUCK DURING FLASHING??
A)ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
Q2) If your device gets a Boot Loop [ boot animation agian & agian ] ??
A)ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
ANY OTHER PROBLEM PM ME
SUUGESTION BEFORE FLASHING
You may want to backup all of your application by Using Either TITANIUM BACKUP or by APP BACKUP AND RESTORE. Because after flashing the stock firmware your all data and applications will be formatted.
Thanks AND Credit TO
1)Omkar$
2)You People For Trying
3)Internet
VIDEO
As Promised Guys The Video Is Ready Do Like This Video
LIKE
COMMENT
SUBSCRIBE!
DONT SHOW IT MEAN IT PRESS THANKS
Click to expand...
Click to collapse
Works Like a Champ..

[Q&A] [GT-S7582][Recovery] TWRP 2.8 touch recovery for Samsung S Duos 2(S7582)

Q&A for [GT-S7582][Recovery] TWRP 2.8 touch recovery for Samsung S Duos 2(S7582)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GT-S7582][Recovery] TWRP 2.8 touch recovery for Samsung S Duos 2(S7582). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Dear
Dear its fully functional in s7582. Cwm have lot of bugs. Backup and restore Problem

How can we apply this with just an android phone? No pc.

Valkyura said:
How can we apply this with just an android phone? No pc.
Click to expand...
Click to collapse
sorry you can't apply this recovery without pc...coz you have to flash it with odin...

TWRP 2.8 touch recovery for Samsung S Duos 2(S7582) - note on bugs
saikatrockz said:
Bugs!!
Time is shown wrong in recovery
Click to expand...
Click to collapse
The time is shown correctly if time zone is set in options. (Settings->Time Zone)
Thanks for this recovery!

you can flash it with no pc
man you can flash it using flashify or nandroid manager from google play store
you can follow this
1' install busybox on your device
2'install flashify or nandroid manager from play store
3: download the recovey.tar then extract it using es file explorer or root explorer or even zarchiver (if the file was ,(recovery.tar.md5) you can just rename it to (recovey.tar ) then extract it )
4pen flashify or nandroid manager the look for flash new recovery
5 look for your recovery then click flash
and walla
please hit thanks if i helped

The Time is not a bug !!!
hi i am using the recovery made by you and have absolute no problems in the time display
the time can be set in the settings /or the advanced menus (i really forgot where)
but i cant use the mtp and the usb storage function in the recovery
i consider this a real bug (until u help me) in the recovery
But thanx anyways for the awesome TWRP Recovery

twrp
how can i use the back up?

cwm flash permanently
first flash cwm via odin then flash super su and then download root explorer pro from onhax and visit etc>install-recovery.sh and rename to install-recovery.sh.bak and now again flash cwm

Not working, pls help! (GT-S7582)
After flashing TWRP, got a PASS message in Odin.
And when I press Vol up+Lock+home TWRP interface doesnt appear,
instead No Command screen comes and then Android system recovery (3e) screen
comes up...
Tried CWM, but same result!
Please help! I've been googling it for a couple of days...!!

unable to Use Odin
V3T_N said:
first flash cwm via odin then flash super su and then download root explorer pro from onhax and visit etc>install-recovery.sh and rename to install-recovery.sh.bak and now again flash cwm
Click to expand...
Click to collapse
Please help to install Odin , i have downloaded samsung drivers and kies and installed , in device manager , CDC and Gt-7582 not installed yet , i update driver of Gt-7582 and choose "Samsung ADB Interface . CDC still not installed. i think due to this Odin ID:com not turns to blue. sorry for bad english.

steel no answers, ha? oh, ok, tnx devs!

Can i flash twrp without pc and if yes plz guide me ... i have samsung s duos 2

rahulhanda20 said:
Can i flash twrp without pc and if yes plz guide me ... i have samsung s duos 2
Click to expand...
Click to collapse
See the pervious post and you will find how to flash TWRP without pc
You have to use Flashify App
---------- Post added at 05:54 PM ---------- Previous post was at 05:49 PM ----------
sarajsadanand said:
After flashing TWRP, got a PASS message in Odin.
And when I press Vol up+Lock+home TWRP interface doesnt appear,
instead No Command screen comes and then Android system recovery (3e) screen
comes up...
Tried CWM, but same result!
Please help! I've been googling it for a couple of days...!!
Click to expand...
Click to collapse
Don't Reboot your phone after flash completed
Instant of Reboot press Vol up+Lock+home and tell me what's the result
---------- Post added at 05:56 PM ---------- Previous post was at 05:54 PM ----------
RamHa said:
steel no answers, ha? oh, ok, tnx devs!
Click to expand...
Click to collapse
Sorry for late reply
Actually I was busy with my study
I am here on XDA after a long time
Can you tell me what you want to know

recovery is not working in samsung s8572
sarajsadanand said:
After flashing TWRP, got a PASS message in Odin.
And when I press Vol up+Lock+home TWRP interface doesnt appear,
instead No Command screen comes and then Android system recovery (3e) screen
comes up...
Tried CWM, but same result!
Please help! I've been googling it for a couple of days...!!
Click to expand...
Click to collapse
I have faced same problem.... Plz tell us what to do

same problem, after installed recovery, phone starts and then restart in recovery mode, then again resart and restart, what can i do sir ji?
---------- Post added at 09:34 PM ---------- Previous post was at 09:33 PM ----------
here same problem, after installed recovery, phone starts and then restart in recovery mode, then again resart and restart, what can i do sir ji?

ahked.ragab said:
man you can flash it using flashify or nandroid manager from google play store
you can follow this
1' install busybox on your device
2'install flashify or nandroid manager from play store
3: download the recovey.tar then extract it using es file explorer or root explorer or even zarchiver (if the file was ,(recovery.tar.md5) you can just rename it to (recovey.tar ) then extract it )
4pen flashify or nandroid manager the look for flash new recovery
5 look for your recovery then click flash
and walla
please hit thanks if i helped
Click to expand...
Click to collapse
Thanks man! This saved me!

(Guide) Root Note 3 SM-N900 5.0/Install Recovery

Here is a full guide on how to root and install custom recovery on Galaxy Note 3 N900 Lollipop
(THIS WILL VOIDE WARRENTY,I AM NOT RESPONSIBLE FOR IF YOUR DEVICE BRICKED)
How to do root:
NOTE 1- MAKE SURE YOU DOWNLOAD THE FILE FOR YOU CORRECT ROOT FILES, THE FILES ARE DIFFERENT FOR 4.4.2 AND DIFFERENT FOR 5.0
NOTE 2- IF YOU KNOW YOU WANT TO FLASH A ROM THEN NO NEED TO ROOT YOUR DEVICE, SKIP THIS AND GO TO HOW TO INSTALL CUSTOM RECOVERY!
Step 1)Get the CF root file compatabile to your vairant from here.. http://forum.xda-developers.com/showthread.php?t=2466423
Step 2) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 3) Now open ODIN on your PC and connect your Galaxy Note 3 to your computer.
Step 4) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 5) Click on pda in odin (if odin 3.09 choose AP) and choose the ".tar" file.
Step 6) Tick "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart
How To Install Custom Recovery
Download The Recovery Image You Want
For TWRP:
Download TWRP IMG From Here:
http://dl.twrp.me/ha3g/
(I dont have other recovery img links.. its your homework )
After downloading go to playstore and download :
Flashify: https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
AFter Installing Flashify Open it and grant SuperSu Permission
Then Choose: Recovey Image
Then: Choose A File And browse the twrp.img file you downloaded and Select it and select yup..
It Will Flash TWRP For Your Phone
And Then Select Reboot.. It Will Reboot Into TWRP Recovery
ROCK AND ROLL NOW
Credits:
@CF-Auto-Root
@TWRP Recovery

not working for me,it starts for few second and then i get the message GAIL

shalilou said:
not working for me,it starts for few second and then i get the message GAIL
Click to expand...
Click to collapse
Which Note 3 You Have?
This Method Is Tested In Note N900 Indian Official 5.0

Is there root for Note 3 N900s available?

If you wanna root kitkat its available but if you want rootfor lollipop its not available now... may be out soon.. you can check yourself from cf root website.. only n900s kitkat available
Sent from my SM-N900 using XDA Free mobile app

tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !

Miaow93 said:
tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !
Click to expand...
Click to collapse
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..

dhanmohan said:
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..
Click to expand...
Click to collapse
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP

Miaow93 said:
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP
Click to expand...
Click to collapse
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..

dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god

Miaow93 said:
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god
Click to expand...
Click to collapse
ohh i don't know about cwm as i don't use them

While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app

skssha said:
While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app
Click to expand...
Click to collapse
you mean usb debugging should turn off while installing recovery!

Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.

Prolab said:
Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.
Click to expand...
Click to collapse
Just wondering, has your KNOX been triggered?

Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes rooting device will trigger Knox.. If you want to reset Knox there's a method in general section I guess.. Boot loader but its for kk.. If u flash it,it will cause bootloop can reset Knox then u have to flash stock and u r fully official

Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes, with this method.

help
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop

Mr_Za said:
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop
Click to expand...
Click to collapse
Just download cf root of your version and make sure that cf file is for lollipop of ur note 3 version and follow the process

Thank you I rooted my device successfully

SM-G357FZ

I need help with this model of Samsung Galaxy Ace...
First the root:
The posts about rooting this phone doesn't work... After reading a long time I discovered the tutorials were for 4.4.2 when the Ace 4 now have 4.4.4
The recovery:
Following the steps carefully a lot of times... I still having the stock recovery... Why?
The ROMs:
Easy. There insn't any ROM...
My question is... Why haven't anyone posted anything yet about this model?
Other question... Why sometimes I find it as Ace Style?
Thanks.
Greetings from Spain.

Samsung galaxy ace.
An average device to use.
I have used ace nxt.
And it was rooted by flashing zip from custom recovery.
If you have found a cwm or twrp for your self.
Boot device to download mode then connect it to pc and open odin3.
And then press the continew button on device. You will see a comport on odin getting yellow.
Sellect the recovery.img and select start.
It will pass the process around 3 min
And then reboot to recovery to see wether its there or not and flash the root.zip
You can find both cuatom recovery for your model and root.zip on google.
You Can ask me for a detiled guide also.
Hit thanks if this helped
Sent from my LG-X160 using XDA Free mobile app

I would really love to have a Custom ROM for my SM-G357FZ!