Database Info

Stuck at samsung image

My Galaxy S SCL i9003 appears to be bricked.
I can still get up the Downloading screen, but cant get into recovery or anything like that (Volume UP, Home and Power right?)
Where can i get an image to flash via odin or something similar?

alfie196 said:
My Galaxy S SCL i9003 appears to be bricked.
I can still get up the Downloading screen, but cant get into recovery or anything like that (Volume UP, Home and Power right?)
Where can i get an image to flash via odin or something similar?
Click to expand...
Click to collapse
You could enter recovery before?? I mean, you have CWM installed right?
Anyways, if you can enter Download mode as you said you can flash any ROM you like, here you have:
- Stock ROMS
- Custom ROMs
Hope it helped ^^

That is a great help thanks, though some of the latests stock roms are on megaupload and are dead links.
Been searching for those threads for ages, though they seemed to have eluded me!/

alfie196 said:
That is a great help thanks, though some of the latests stock roms are on megaupload and are dead links.
Been searching for those threads for ages, though they seemed to have eluded me!/
Click to expand...
Click to collapse
here is a bit of help for u...
get xxkpq from here....i am giving u xxkpq as all the possible mods are there for it.
cheers..!
http://hotfile.com/dl/149819725/dd2716c/I9003XXKPQ_I9003SERKPQ_SER.rar.html

alfie196 said:
That is a great help thanks, though some of the latests stock roms are on megaupload and are dead links.
Been searching for those threads for ages, though they seemed to have eluded me!/
Click to expand...
Click to collapse
Haha well, some of them are on Megaupload, but most of them are on multiupload, which is great because it has links to many servers in the same one page! Try it!
And you're welcome, we're here to help

Still having issues, i was hoping to get it back to stock but i cant seem to find a complete update e.g. I9003 XXKPE if you know where i can find one please advise.(all the links to full updates are broken in the above links).
Also, being a noob i am struggling to find info on how to get CWM on my device, as i mentioned i can only get to Download screen. Do you know where i can instructions for flashing it with odin3? All the ones i have seen seem to suggest you need to know what version you are currently running, but i have no idea.
Thanks.

alfie196 said:
Still having issues, i was hoping to get it back to stock but i cant seem to find a complete update e.g. I9003 XXKPE if you know where i can find one please advise.(all the links to full updates are broken in the above links).
Also, being a noob i am struggling to find info on how to get CWM on my device, as i mentioned i can only get to Download screen. Do you know where i can instructions for flashing it with odin3? All the ones i have seen seem to suggest you need to know what version you are currently running, but i have no idea.
Thanks.
Click to expand...
Click to collapse
http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
xxkpe.....
thn xxkpq..
th cwm thru odin as pda...flas either amits universal or uc kernal v1009

alfie196 said:
Still having issues, i was hoping to get it back to stock but i cant seem to find a complete update e.g. I9003 XXKPE if you know where i can find one please advise.(all the links to full updates are broken in the above links).
Also, being a noob i am struggling to find info on how to get CWM on my device, as i mentioned i can only get to Download screen. Do you know where i can instructions for flashing it with odin3? All the ones i have seen seem to suggest you need to know what version you are currently running, but i have no idea.
Thanks.
Click to expand...
Click to collapse
I don't think you can install CWM withount knowing your current firmware... I'll make a tiny tutorial for you for flashing with Odin:
1. Download XXKPE from the link from geekynoob
2. Download the latona file: http://www.mediafire.com/?8753v6sqskbdxs6
3. Put your phone in Download Mode (when off, push Volume Down + Home + Power for a few seconds) and connect it to your PC via USB
4. In Odin, push PIT and select the latona file. Make sure Re-Partition is checked when you do (Auto Reboot and F. Reset Time should be checked as well).
5. Push Start and wait. When finished, the phone will reboot and stay on a black screen. Then, remove your battery and put it back again.
6. Get into Download Mode again and connect your phone to the PC. Now push Reset and select the XXKPE files:
Code:
[B]BOOTLOADER[/B] -> select the file with [I]APBOOT[/I] in his name
[B]PDA[/B] -> select the file with [I]CODE[/I] in his name
[B]PHONE[/B] -> select the file with [I]MODEM[/I] in his name
[B]CSC[/B] -> select the file with [I]CSC[/I] in his name
If any of these files do not exist, leave the field blank.
7. Push Start and wait until reboot If you want another version just flash over XXKPE
Now for the root and CWM:
1. Download the file for your firmware from here: http://forum.xda-developers.com/showthread.php?t=1331253
2. Enter into Download Mode
3. Open Odin, push Reset and load the file you downloaded in the PDA field. Push Start and done!!
If you don't know your version though or you can't flash KPE, it could be difficult to install CWM. You can always try using Kies and update your version (if there is an update) or reseting/reinstalling from there your curent firmware (I think you can, but not sure).
Ask if you found any problem!

sygmakikus said:
I don't think you can install CWM withount knowing your current firmware... I'll make a tiny tutorial for you for flashing with Odin:
1. Download XXKPE from the link from geekynoob
2. Download the latona file: http://www.mediafire.com/?8753v6sqskbdxs6
3. Put your phone in Download Mode (when off, push Volume Down + Home + Power for a few seconds) and connect it to your PC via USB
4. In Odin, push PIT and select the latona file. Make sure Re-Partition is checked when you do (Auto Reboot and F. Reset Time should be checked as well).
5. Push Start and wait. When finished, the phone will reboot and stay on a black screen. Then, remove your battery and put it back again.
6. Get into Download Mode again and connect your phone to the PC. Now push Reset and select the XXKPE files:
Code:
[B]BOOTLOADER[/B] -> select the file with [I]APBOOT[/I] in his name
[B]PDA[/B] -> select the file with [I]CODE[/I] in his name
[B]PHONE[/B] -> select the file with [I]MODEM[/I] in his name
[B]CSC[/B] -> select the file with [I]CSC[/I] in his name
If any of these files do not exist, leave the field blank.
7. Push Start and wait until reboot If you want another version just flash over XXKPE
Now for the root and CWM:
1. Download the file for your firmware from here: http://forum.xda-developers.com/showthread.php?t=1331253
2. Enter into Download Mode
3. Open Odin, push Reset and load the file you downloaded in the PDA field. Push Start and done!!
If you don't know your version though or you can't flash KPE, it could be difficult to install CWM. You can always try using Kies and update your version (if there is an update) or reseting/reinstalling from there your curent firmware (I think you can, but not sure).
Ask if you found any problem!
Click to expand...
Click to collapse
Hey, i also had the same problem and followed what you said but I am still stick at the samsung boot animation :/ . The first time it boots , the animation has some sound after that the animation ( samsung with a glow ) keeps reappearing. Is is some kind of boot loop ? I tried repeating the steps again and again and again but that had the same result .I used the XXXKPQ .Please help :'( . I am a noob . Thanks
---------- Post added at 08:29 PM ---------- Previous post was at 08:25 PM ----------
and I can access Download mode.
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
and I can only access download mode neither stock recovery nor CWM

Krishnadusad said:
Hey, i also had the same problem and followed what you said but I am still stick at the samsung boot animation :/ . The first time it boots , the animation has some sound after that the animation ( samsung with a glow ) keeps reappearing. Is is some kind of boot loop ? I tried repeating the steps again and again and again but that had the same result .I used the XXXKPQ .Please help :'( . I am a noob . Thanks
---------- Post added at 08:29 PM ---------- Previous post was at 08:25 PM ----------
and I can access Download mode.
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
and I can only access download mode neither stock recovery nor CWM
Click to expand...
Click to collapse
Are you sure you can't access recovery using volume up+home+power button? Do that and factory reset, it'll boot up
Cheers
Sent from my GT-i9003 powered by Smooth and no lag vurrutRom

bscraze said:
Are you sure you can't access recovery using volume up+home+power button? Do that and factory reset, it'll boot up
Cheers
Sent from my GT-i9003 powered by Smooth and no lag vurrutRom
Click to expand...
Click to collapse
THanks but,i can't :/ . During the many tries i did was once able to get into stock recovery and i tried wiping cache and factory reset but it gave me an error in system rfs when i wiped data . And now when i try getting into recovery it gives me a blaxk image and nothing appears. I can only get into download mode.

Krishnadusad said:
THanks but,i can't :/ . During the many tries i did was once able to get into stock recovery and i tried wiping cache and factory reset but it gave me an error in system rfs when i wiped data . And now when i try getting into recovery it gives me a blaxk image and nothing appears. I can only get into download mode.
Click to expand...
Click to collapse
A clean flash should help. Follow misledz thread on flashing
Cheers
Sent from my GT-i9003 powered by Smooth and no lag vurrutRom

bscraze said:
A clean flash should help. Follow misledz thread on flashing
Cheers
Sent from my GT-i9003 powered by Smooth and no lag vurrutRom
Click to expand...
Click to collapse
THANKS ALOT ! Downloaded the firmwares from samfirmware and followed the clean flash guide and it worked .It wouldn't have been possible without you guys

Cheers guys, finally found some time to revive it.
Sent from my HTC One X using XDA

boot loop!!
hi , i am having galaxy sl i9003, and all was going good until came to newzealand and updated my cell by official FW by kies. when i did that the cell restart by by it self and it stucks in the boot lood and when i saw the loop i remove battery and after that i starts it again what i see is my phone is formated no contacts no messages.thats not all after that as i had no choice to go for unofficial FW i tried some FW from every were. read so many forums and tried on my phone but didnt worked but what i came to know is my internal sd is broken thats the problem. i read one solution which contains root the phone and tried it and ended up having one more addition in my problems now it doesnt even starts its just stucks in boot loop no matter what ever i do. i can go to download mode and recovery mode thats all nothing else . i hope someone here can help me out plz!!!

Dharmik111120 said:
hi , i am having galaxy sl i9003, and all was going good until came to newzealand and updated my cell by official FW by kies. when i did that the cell restart by by it self and it stucks in the boot lood and when i saw the loop i remove battery and after that i starts it again what i see is my phone is formated no contacts no messages.thats not all after that as i had no choice to go for unofficial FW i tried some FW from every were. read so many forums and tried on my phone but didnt worked but what i came to know is my internal sd is broken thats the problem. i read one solution which contains root the phone and tried it and ended up having one more addition in my problems now it doesnt even starts its just stucks in boot loop no matter what ever i do. i can go to download mode and recovery mode thats all nothing else . i hope someone here can help me out plz!!!
Click to expand...
Click to collapse
Boot to recovery and factory reset.
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CleanKpu rom

bscraze said:
Boot to recovery and factory reset.
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CleanKpu rom
Click to expand...
Click to collapse
thanks bro for reply i tried factory reset , i tried many FW and ever time i do i first do factory reset. but it doesnt works.

Dharmik111120 said:
thanks bro for reply i tried factory reset , i tried many FW and ever time i do i first do factory reset. but it doesnt works.
Click to expand...
Click to collapse
Which firmware did you flash? Follow this flashing guide exactly and reflash: http://forum.xda-developers.com/showthread.php?t=1133787
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CleanKpu rom

bscraze said:
Which firmware did you flash? Follow this flashing guide exactly and reflash: http://forum.xda-developers.com/showthread.php?t=1133787
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CleanKpu rom
Click to expand...
Click to collapse
seriously i tried that a long ago!

Dharmik111120 said:
seriously i tried that a long ago!
Click to expand...
Click to collapse
You did not mention which stock rom you flashed.
Start from scratch.
Flash XXKPE first. Follow the guide given by Misledz.
Then go for XXKPQ or DDKP3 as you decide.

s5830i help needed!!!!

so here i am , i was trying o]to flash stock rom via odin and i used .pit file, it started .. and then it said re-partition operation failed.... now when i click on the power button the screen shows a light but there is no samsung logo, i cannot go into recovery mode but i can go into download mode, i also tried to flash the PDA from 4 shared but it also didn't work... please help me.....

try to Uncheck re-partition or look here showthread.php?t=1552792

/ Ech \ said:
so here i am , i was trying o]to flash stock rom via odin and i used .pit file, it started .. and then it said re-partition operation failed.... now when i click on the power button the screen shows a light but there is no samsung logo, i cannot go into recovery mode but i can go into download mode, i also tried to flash the PDA from 4 shared but it also didn't work... please help me.....
Click to expand...
Click to collapse
there are differences between s5830/s5830i
find a rom for s5830i only
check from fastboot if your phone is unlocked (S-off)
(maybe you try to flash a rom that requires S-off ??)
Code:
fastboot oem status
fastboot oem unlock
do you have a nandroid backup? it can help you to revert to stock rom
you should have one always do a backup before make changes !!
links
http://www.4shared.net/source.html?token=0e95ccde61c2962e03ea
(to flash read instructions...)
http://www.4shared.net/s5830i
if you have nandroid backup this can help

ruscan.calin said:
there are differences between s5830/s5830i
find a rom for s5830i only
check from fastboot if your phone is unlocked (S-off)
(maybe you try to flash a rom that requires S-off ??)
Code:
fastboot oem status
fastboot oem unlock
do you have a nandroid backup? it can help you to revert to stock rom
you should have one always do a backup before make changes !!
links
http://www.4shared.net/source.html?token=0e95ccde61c2962e03ea
(to flash read instructions...)
http://www.4shared.net/s5830i
if you have nandroid backup this can help
Click to expand...
Click to collapse
wtf ???? what is this 4shared.net?
new-aces.blogspot.com is my blog....what is it doing on 4shared.net
anw plz help me man i took my phone to a repair shop and he said he wasn't able to fix now when i turn it on i can see the samsung logo for like 5 secs and then it turns off again, then samsung logo 5 secs then turns off again i tried flashing pda.tar and it flashed successfully but still cannot turn on my phone help?

ObS3SSioN said:
try to Uncheck re-partition or look here showthread.php?t=1552792
Click to expand...
Click to collapse
i tried everythin.... not working now i can see samsung logo but for secs and then the phone turns off by itself and then samsung logo for 5 secs and then the phone turns off again so on....

are there any working stock roms for the s5830i and how to flash them , dont give me pda.tar it isnt working i need an official stock rom plz to fix the brick.. ty

/ Ech \ said:
wtf ???? what is this 4shared.net?
new-aces.blogspot.com is my blog....what is it doing on 4shared.net
anw plz help me man i took my phone to a repair shop and he said he wasn't able to fix now when i turn it on i can see the samsung logo for like 5 secs and then it turns off again, then samsung logo 5 secs then turns off again i tried flashing pda.tar and it flashed successfully but still cannot turn on my phone help?
Click to expand...
Click to collapse
maybe this thread can help you
this ROM seems to be a good one for you phone
-in Windows7/Vista open Odin as administrator
-try other version of Odin
-try to enable "re-partition"
-never use ROM Manager this can destroy your phone
-never use a ROM made for s5830 (you have s5830i)
---------- Post added at 06:03 PM ---------- Previous post was at 05:48 PM ----------
/ Ech \ said:
are there any working stock roms for the s5830i and how to flash them , dont give me pda.tar it isnt working i need an official stock rom plz to fix the brick.. ty
Click to expand...
Click to collapse
believe me a lot of people have problems with this model when flashing
try here for stock rom
enter s5830i in search field
(you need subscription to enable download mode)
also I made a thread for Samsung stock roms here
but there is nobody to answer :laugh:

ruscan.calin said:
maybe this thread can help you
this ROM seems to be a good one for you phone
-in Windows7/Vista open Odin as administrator
-try other version of Odin
-try to enable "re-partition"
-never use ROM Manager this can destroy your phone
-never use a ROM made for s5830 (you have s5830i)
---------- Post added at 06:03 PM ---------- Previous post was at 05:48 PM ----------
believe me a lot of people have problems with this model when flashing
try here for stock rom
enter s5830i in search field
(you need subscription to enable download mode)
also I made a thread for Samsung stock roms here
but there is nobody to answer :laugh:
Click to expand...
Click to collapse
hey man thanks for ur support but roms aren't flashing properly , maybe i need to split em using splitfus, anw if u can tell me how to get into recovery mode using a different method , cz i tried to get into recovery mode volume+home+power and it aint working so if there is any other way using pc or something , that would be great , thank u

/ Ech \ said:
hey man thanks for ur support but roms aren't flashing properly , maybe i need to split em using splitfus, anw if u can tell me how to get into recovery mode using a different method , cz i tried to get into recovery mode volume+home+power and it aint working so if there is any other way using pc or something , that would be great , thank u
Click to expand...
Click to collapse
to flash by Odin put your phone in download mode
Download Mode : Home + Vol Dn + Power Button this is not working ?
if not try to remove battery for a few s then put it back
what is your Odin version ?
here is Odin from sammobile site
to flash enter download mode
in Odin
OPS – inlcuded with Odin from sammobile site
Boot – DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.md5
Phone – MODEM_S5830iXXLB1_REV00.tar.md5
PDA – PDA_S5830iJPLB1_REV00.tar.md5
CSC – GT-S5830i-MULTI-CSC-OJPLA5.tar.md5
EFS -None
OnePackage - None
Click to expand...
Click to collapse
something like this maybe file names are not the same I gave an idea only
if this is not working check "re-partition" then flash again

ruscan.calin said:
to flash by Odin put your phone in download mode
Download Mode : Home + Vol Dn + Power Button this is not working ?
if not try to remove battery for a few s then put it back
what is your Odin version ?
here is Odin from sammobile site
to flash enter download mode
in Odin
something like this maybe file names are not the same I gave an idea only
if this is not working check "re-partition" then flash again
Click to expand...
Click to collapse
thanks bro i was able to fix it i flashed xxkl1 and used pit file and csc and phone and pda and ticked repartition.. ty anw ! i hit the thanks button i really appreciate ur support

/ Ech \ said:
thanks bro i was able to fix it i flashed xxkl1 and used pit file and csc and phone and pda and ticked repartition.. ty anw ! i hit the thanks button i really appreciate ur support
Click to expand...
Click to collapse
Man I like your last answer you solved your problem ! Good job !
I like to contribute solving problems because I hate problems :laugh:
I have had an Android phone made a custom ROM
and.. destroyed the phone with overclocking ...
now I have to buy another phone and Galaxy Ace/ Nexus is an option
Galaxy Ace is a good phone but there are problems when flashing so be careful when flashing again!
there are options to play with when flashing like check re-partition or use correct version of Odin
and sammobile.com is best site to check when having troubles !

How to ROOT GNote N7000 N7000XXLS2 4.1.1

Hello Friend, I need your help too, I'm from Brazil and just upgraded my Galaxy Note N7000 for N7000XXLS2 ROOM 4.1.1, and I wonder if there is already proceeding to ROOT this room.
Remember that I downloaded from this site sammobile.com room. So what procedure should I follow to do or perform root this room? Thank you brother :: D

Root JRO03C.N7000XXLS2
JuniorLima said:
Hello Friend, I need your help too, I'm from Brazil and just upgraded my Galaxy Note N7000 for N7000XXLS2 ROOM 4.1.1, and I wonder if there is already proceeding to ROOT this room.
Remember that I downloaded from this site sammobile.com room. So what procedure should I follow to do or perform root this room? Thank you brother :: D
Click to expand...
Click to collapse
I've tried other root methods the whole afternoon, none of them work yet.
---------- Post added at 08:45 PM ---------- Previous post was at 08:40 PM ----------
toni_gon said:
I've tried other root methods the whole afternoon, none of them work yet.
Click to expand...
Click to collapse
Once ROM'd this cannot be reversed back to ICS. I used Odin to re-flash the ROM to get the SGN to reboot properly. Its fully functional again:fingers-crossed:.

toni_gon said:
I've tried other root methods the whole afternoon, none of them work yet.
---------- Post added at 08:45 PM ---------- Previous post was at 08:40 PM ----------
Once ROM'd this cannot be reversed back to ICS. I used Odin to re-flash the ROM to get the SGN to reboot properly. Its fully functional again:fingers-crossed:.
Click to expand...
Click to collapse
I managed to make the ROOT ... if you want to know how to do is just say that I post here

how can i do that? i am trying this about 2 days and i cannot root it
Sent from my GT-N7000 using xda premium

vasyno1 said:
how can i do that? i am trying this about 2 days and i cannot root it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
just a minute, is that I'm from Brazil and I need to translate to English tutorial for you ok.
Ae ... you will like, it is not difficult the process is fully functional ... just a minute ..

[SIZE="<font><font>6</font></font>"][SIZE="<font><font>7</font></font>"]Performing the Root[/SIZE][/SIZE]
1-Have a micro SD card external memory and copy it to the file Philz Kernel 2.7. He will be key to your handset to work in step 7. Save it to a folder that starts with the letter A to be located more quickly (hint staff);
*
2-Download the Odin 3 v 1.87, unzip and run it. Now go to PDA and locate the file Kernel v5.3 GL Hydracore STD that you've already downloaded. Do not touch any other option Odin PC. Leave everything exactly as it is!
*
3-Turn off your phone (and make sure you have at least 80% battery charge);
*
4-Hold the Power + Home button + volume down to get into Download Mode / Odin Mode. Press the volume up and you're ready to install Kernel v5.3 GL Hydracore STD;
*
5-Connect your device to your computer using the USB cable. (WARNING! If your computer does not recognize your device, download and install Samsung Kies on your computer and then connect your device to have the drivers installed);
*
6-Once the ODIN PC indicate recognition of your device, click Start and NOT UNPLUG YOUR PHONE NO WAY! AVOID USING THE COMPUTER UNTIL THE INSTALLATION WAS DONE;
*
7-Wait for the device to restart. Probably he can not leave the home screen. Do not worry. Turn it off and remove the battery for 1 minute. For some reason I can not explain the GL Hydracore, even v7 is not working on Galaxy Note with Android 4.1.1 stock;
*
8-Now replace the battery and get into Clockworkmod (simultaneously press the Power + Home + Volume Up) and go to "Instal Zip from SD Card" and then "Chose External Zip from SD Card" and select the file Kernel Philz 2.7 CWM you downloaded and saved on your micro SD card. Select it and choose "yes" (Thanks to Junior Lima to discover that step tutorial)
*
8-Wait for the device to restart. Ready to Root and Clockworkmod device.
*
With this procedure you will increase the binary counter and get a yellow triangle every time you start your machine. Do not worry. Download the app Triangle Away v 2.10 and run it.
*
Okay, your system will be as an officer again.

can yoy give me the download links for files?

vasyno1 said:
can yoy give me the download links for files?
Click to expand...
Click to collapse
i used odin pda to install philZ-cwm6-xxls2-xjb-2.7.tar.md5 frm http://forum.xda-developers.com/showthread.php?t=1901191
later i copied Root_SuperSU0.95.Only-Signed to sd card i enteredrecovery mod and install zip from card
@ the end i installed triangle and everything went ok
have fun

rchaker said:
i used odin pda to install philZ-cwm6-xxls2-xjb-2.7.tar.md5 frm http://forum.xda-developers.com/showthread.php?t=1901191
later i copied Root_SuperSU0.95.Only-Signed to sd card i enteredrecovery mod and install zip from card
@ the end i installed triangle and everything went ok
have fun
Click to expand...
Click to collapse
Where did you get this process? I'd rather spend the Odin PDA KERNEL HYDRACORE life .... CWM then passes via the Kernel-PhilZ cwm6 ... was so I could do on my phone!!
Hydracore Kernel: http://forum.xda-developers.com/showthread.php?t=1749863 (V7 may be the same)
Kenel PhilZ-cwm6: http://205.196.121.32/yldwgfctn3vg/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
Running Wipe data factory / wipe cache / wipe dalvik after each flash
Triangle Away .... to remove triangle and binary counter ... (can be found in Google Apps)
has nothing to err .... hug

JuniorLima said:
Where did you get this process? I'd rather spend the Odin PDA KERNEL HYDRACORE life .... CWM then passes via the Kernel-PhilZ cwm6 ... was so I could do on my phone!!
Hydracore Kernel: http://forum.xda-developers.com/showthread.php?t=1749863 (V7 may be the same)
Kenel PhilZ-cwm6: http://205.196.121.32/yldwgfctn3vg/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
Running Wipe data factory / wipe cache / wipe dalvik after each flash
Triangle Away .... to remove triangle and binary counter ... (can be found in Google Apps)
has nothing to err .... hug
Click to expand...
Click to collapse
i ve done it on my n7000 and everything went ok

Strange results
JuniorLima said:
[SIZE="<font><font>6</font></font>"][SIZE="<font><font>7</font></font>"]Performing the Root[/SIZE][/SIZE]
1-Have a micro SD card external memory and copy it to the file Philz Kernel 2.7. He will be key to your handset to work in step 7. Save it to a folder that starts with the letter A to be located more quickly (hint staff);
*
2-Download the Odin 3 v 1.87, unzip and run it. Now go to PDA and locate the file Kernel v5.3 GL Hydracore STD that you've already downloaded. Do not touch any other option Odin PC. Leave everything exactly as it is!
*
3-Turn off your phone (and make sure you have at least 80% battery charge);
*
4-Hold the Power + Home button + volume down to get into Download Mode / Odin Mode. Press the volume up and you're ready to install Kernel v5.3 GL Hydracore STD;
*
5-Connect your device to your computer using the USB cable. (WARNING! If your computer does not recognize your device, download and install Samsung Kies on your computer and then connect your device to have the drivers installed);
*
6-Once the ODIN PC indicate recognition of your device, click Start and NOT UNPLUG YOUR PHONE NO WAY! AVOID USING THE COMPUTER UNTIL THE INSTALLATION WAS DONE;
*
7-Wait for the device to restart. Probably he can not leave the home screen. Do not worry. Turn it off and remove the battery for 1 minute. For some reason I can not explain the GL Hydracore, even v7 is not working on Galaxy Note with Android 4.1.1 stock;
*
8-Now replace the battery and get into Clockworkmod (simultaneously press the Power + Home + Volume Up) and go to "Instal Zip from SD Card" and then "Chose External Zip from SD Card" and select the file Kernel Philz 2.7 CWM you downloaded and saved on your micro SD card. Select it and choose "yes" (Thanks to Junior Lima to discover that step tutorial)
*
8-Wait for the device to restart. Ready to Root and Clockworkmod device.
*
With this procedure you will increase the binary counter and get a yellow triangle every time you start your machine. Do not worry. Download the app Triangle Away v 2.10 and run it.
*
Okay, your system will be as an officer again.
Click to expand...
Click to collapse
I had to use Odin to flash the Philz-cwm6-xxls-x2JB-2.7.tar file as it would not reboot after flashing hydracore. But the root was made with Super SU appearing in the apps drawer.
The second strange thing was no CWM recovery was installed, I had to get it from the play store and use the app to flash CWM.
But it's rooted now.
The next issue seems to be the Supernexus ROM from Faryaab, as it seems to have Build Prop issues.
A luta continua...

One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G

gflyer said:
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
Click to expand...
Click to collapse
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.

toni_gon said:
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
Click to expand...
Click to collapse
I've compared the buildprop files of both ROMS, does anyone know what has to be edited out of the buildprop file of the JB rom to allow installation of the SuperNexus ROM?
Perhaps the Samsung hidden attribs?

toni_gon said:
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
Click to expand...
Click to collapse
is really this room is having trouble working with the Kernel's working with the other's room ... the only room that is working with XXLS2 as I know, is the PhilZ. Regarding Hydracore, friend, we passed this kernel first, to win the CWM machine understand? because from it as we flash the kernel PhilZ ...

gflyer said:
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
Click to expand...
Click to collapse
Me did not work so ... I had to spend the first kernel of Hydracore .... the more strange, is that after flashing the Kernel Hydracore, the device will not turn over ... it shows the screen with the name of N7000 and turn it off ... it will not start. Only after passing the kernel PhilZ the device connects. I can not understand why, but if anyone knows, feel free to tell us .... thanks!!

JuniorLima said:
Me did not work so ... I had to spend the first kernel of Hydracore .... the more strange, is that after flashing the Kernel Hydracore, the device will not turn over ... it shows the screen with the name of N7000 and turn it off ... it will not start. Only after passing the kernel PhilZ the device connects. I can not understand why, but if anyone knows, feel free to tell us .... thanks!!
Click to expand...
Click to collapse
I achieved root in the same way, but could not boot into CWM after installing Hydarcore, I used Odin to flash Philz, after flashing Hydracore. The only remaining issue is to install the custom ROM SuperNexus from Faryaab, I keep getting build prop errors.
I've tried modding the Faryaab buildprop to almost the same as the Sammy XXLS2 and I still have not achieved it...
Anyone have any ideas?

Could this help?
http://forum.xda-developers.com/showpost.php?p=34577056&postcount=2

rchaker said:
i ve done it on my n7000 and everything went ok
Click to expand...
Click to collapse
Got it ... then the two processes work perfectly ... because I ran the process described at the beginning of the post and it worked fine ... Now it's a matter of taste ... even more

full instructions
rchaker said:
i ve done it on my n7000 and everything went ok
Click to expand...
Click to collapse
hi... good day... im planning to root my Galaxy Note running on official XLS2 4.1.1
this is my first time to root my phone and i wanna be sure that im doing it properly...
Could you please give me a step by step instructions as to how to root my phone?
thanks ain advance... and i appreciate your help

(Guide) How to root Samsung Galaxy Tab 3 SM-T111

How to root Samsung Galaxy Tab 3 Neo (Lite) SM-T111 (7.0 inch)
Just couple of days back I have made Prerooted Dr.Ketan custom ROM and many user asking about how to root SM-T111 so here describing simple method about how to root SM-T111.
1.Download tar version of SM-T110 TWRP which is working fine on T111. Here is original thread and you have to download This one. (select tar version NOT flashablbe zip). Thank to @gr8nole
2.Extract that recovery to get recovery.tar.md5
3.Flash this extracted file with Odin (PDA/AP tab)
4.Download SuperSU.zip and here is original thread of SuperSu by chainfire if you needs further info about SuperSU
5.Copy downloaded SuperSu file to Sd card
6.Reboot to recovery (Vol up+power+home)
7.select SuperSu zip and flash
Done !

Model number SM-T111M
Android version 4.2.2
Baseband version T111MUBUANB3
Kernel versiom 3.4.5-2531780
will it work?

Some problem
Model number SM-T111
Android version 4.2.2
Baseband version T111XXUANAC
Kernel versiom 3.4.5-2449362
Status TESTED ! AND WORK BUT STILL LOOP ON TWRP
usb debuger is on (before 2nd reset after installing superSU)
and now "adb" never detect my tab...cant use any adb command....
tested 2 time root 2 time stock recovery....
any idea ?
(i know my bad english but u surely understand i think)

Thanks
I'm Ok
Sent from my SM-T111

how to enter stock recovery in sm t111
I tried various button combo's, , home+ power, etc. screen blink tablet shut down

Switch of device
Press power +volume up +home
Once you see Samsung text logo on screen release power and keep holding other 2 button.
It will boot to recovery.
For download mode same way but use volume down in place of volume up.
Sent from my SM-N900 using xda premium

Please help.
I'm stuck on boot loop in recovery, nothing it's working, everything I do(charge, reboot system) the tablet it's entering recovery mode. How can I put the stock recovery or anything else? Thankyou
Edit: dw stock recovey from here and flash again with odin, now it's booting
There is a bug: after flash super su, install back stock recovery and it's ok
Edit: Samsung GALAXY Tab3 Lite 7.0 3G SM-T111 Stock firmware for Romania

dr.ketan said:
Switch of device
Press power +volume up +home
Once you see Samsung text logo on screen release power and keep holding other 2 button.
It will boot to recovery.
For download mode same way but use volume down in place of volume up.
Note: don't reboot to recovery mode , if you want to recovery mode just turn off and use power + vol up + home
Click to expand...
Click to collapse

Multi Window files needed!!!!!!!!
dr.ketan said:
How to root Samsung Galaxy Tab 3 Neo (Lite) SM-T111 (7.0 inch)
Just couple of days back I have made Prerooted Dr.Ketan custom ROM and many user asking about how to root SM-T111 so here describing simple method about how to root SM-T111.
1.Download tar version of SM-T110 TWRP which is working fine on T111. Here is original thread and you have to download This one. (select tar version NOT flashablbe zip). Thank to @gr8nole
2.Extract that recovery to get recovery.tar.md5
3.Flash this extracted file with Odin (PDA/AP tab)
4.Download SuperSU.zip and here is original thread of SuperSu by chainfire if you needs further info about SuperSU
5.Copy downloaded SuperSu file to Sd card
6.Reboot to recovery (Vol up+power+home)
7.select SuperSu zip and flash
Done !
Click to expand...
Click to collapse
Hello Dr.Ketan
i'm a beginner developer
i need a few files from tab 3 7 neo for porting multi window to various devices
if ur support is with me then please reply
or anyone else seeing this message would like to help that would be great

Hi everybody,
I'm trying to root my T111 just updated with the latest official Samsung firmware (Sept 2014), now I correctly flashed recovery through Odin, but when I enter CWM and select supersu.zip to install it, it returns signature error...
Could it be related to the latest official rom?
Do I need a different supersu package (I downloaded the latest)?
I tried do download it few times, thinking about a corrupted zip, but it's intact...
Thanks in advance.
Danilo
EDIT: I follow xda since 2008, first post 6 years later...

Post screenshot of your recovery
Sent from my SM-N900 using xda premium

dr.ketan said:
Post screenshot of your recovery
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
Took it from web, but this is exactly what I get.
Thanks for helping me, ketan. :good:

Your recovery seems stock only.
Sent from my SM-N900 using xda premium

dr.ketan said:
Your recovery seems stock only.
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
Really?!
Odin said it worked...
By the way, I try again, should TWRP.2.7.0.1 and the latest Supersu work?
Thanks again.
P.S.: ketan, are you working on a new rom on this device? I'd like to have a clean naked one...

donehello said:
Really?!
Odin said it worked...
By the way, I try again, should TWRP.2.7.0.1 and the latest Supersu work?
Thanks again.
P.S.: ketan, are you working on a new rom on this device? I'd like to have a clean naked one...
Click to expand...
Click to collapse
Use twrp one I have said in op.
I am busy with other development and no any plan to update rom for this device. One is based on previous version is there on Dev section. Basically this is not my primary device but only gaming device for my little kid. If I make any new version then will post in dev section.
Sent from my SM-N900 using xda premium

dr.ketan said:
Use twrp one I have said in op.
I am busy with other development and no any plan to update rom for this device. One is based on previous version is there on Dev section. Basically this is not my primary device but only gaming device for my little kid. If I make any new version then will post in dev section.
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
I know who you are ketan, already seen that thread, and that is not your primary device (actually is not my primary too).
Thanks for your help, I did something wrong while rooting, I did it again and worked fine...
Thanks again.
All the best. :good:

All The Steps Followed But At The End , It's not booting in recovery .
dr.ketan said:
How to root Samsung Galaxy Tab 3 Neo (Lite) SM-T111 (7.0 inch)
Just couple of days back I have made Prerooted Dr.Ketan custom ROM and many user asking about how to root SM-T111 so here describing simple method about how to root SM-T111.
1.Download tar version of SM-T110 TWRP which is working fine on T111. Here is original thread and you have to download This one. (select tar version NOT flashablbe zip). Thank to @gr8nole
2.Extract that recovery to get recovery.tar.md5
3.Flash this extracted file with Odin (PDA/AP tab)
4.Download SuperSU.zip and here is original thread of SuperSu by chainfire if you needs further info about SuperSU
5.Copy downloaded SuperSu file to Sd card
6.Reboot to recovery (Vol up+power+home)
7.select SuperSu zip and flash
Done !
Click to expand...
Click to collapse
Hello , I got a Galaxy Tab 3 Neo (SM-T111) , I followed your process for rooting my device , all steps followed and were going correct and i flashed recovery.tar.md5 file via odin but the problem is after flashing , and pressing power+vol up+home , I can't boot in recovery , I also left the power button when logo appears , but it goes black . And once it went to stock recovery I think and there were 2 error's (No Command and then simply Error) . Please a quick and fast answer will be thankfull.
Thanks in advance ,
[H]a!cON-

You can repeat procedure. Make sure you are downloading correct version as said in op.
Sent from my SM-N900 using xda premium

Can't boot in to recovery .
dr.ketan said:
How to root Samsung Galaxy Tab 3 Neo (Lite) SM-T111 (7.0 inch)
Just couple of days back I have made Prerooted Dr.Ketan custom ROM and many user asking about how to root SM-T111 so here describing simple method about how to root SM-T111.
1.Download tar version of SM-T110 TWRP which is working fine on T111. Here is original thread and you have to download This one. (select tar version NOT flashablbe zip). Thank to @gr8nole
2.Extract that recovery to get recovery.tar.md5
3.Flash this extracted file with Odin (PDA/AP tab)
4.Download SuperSU.zip and here is original thread of SuperSu by chainfire if you needs further info about SuperSU
5.Copy downloaded SuperSu file to Sd card
6.Reboot to recovery (Vol up+power+home)
7.select SuperSu zip and flash
Done !
Click to expand...
Click to collapse
All steps followed correctly but when after falshing recovery.tar.md5 when i try to boot into recovery it shows up the logo then i remove my finger from power button then the screen goes black . Please Help !
Model - Galaxy Tab 3 Neo (Sm-T111)
Kerlel Version - 3.4.5-2698417
Baseband Version - T111XXUANF3.
Thanks in advance .
[H]a!cON-
---------- Post added at 03:36 PM ---------- Previous post was at 03:31 PM ----------
[email protected] said:
Hello , I got a Galaxy Tab 3 Neo (SM-T111) , I followed your process for rooting my device , all steps followed and were going correct and i flashed recovery.tar.md5 file via odin but the problem is after flashing , and pressing power+vol up+home , I can't boot in recovery , I also left the power button when logo appears , but it goes black . And once it went to stock recovery I think and there were 2 error's (No Command and then simply Error) . Please a quick and fast answer will be thankfull.
Thanks in advance ,
[H]a!cON-
Click to expand...
Click to collapse
I downloaded T110.CMW.v6.0.4.8.tar.md5 and flashed , not working !
Model - Galaxy Tab 3 Neo (Sm-T111)
Kerlel Version - 3.4.5-2698417
Baseband Version - T111XXUANF3.
Thanks in advance .
[H]a!cON-

I said to use twrp not cwm
Sent from my SM-N900 using xda premium

(Guide) Root Note 3 SM-N900 5.0/Install Recovery

Here is a full guide on how to root and install custom recovery on Galaxy Note 3 N900 Lollipop
(THIS WILL VOIDE WARRENTY,I AM NOT RESPONSIBLE FOR IF YOUR DEVICE BRICKED)
How to do root:
NOTE 1- MAKE SURE YOU DOWNLOAD THE FILE FOR YOU CORRECT ROOT FILES, THE FILES ARE DIFFERENT FOR 4.4.2 AND DIFFERENT FOR 5.0
NOTE 2- IF YOU KNOW YOU WANT TO FLASH A ROM THEN NO NEED TO ROOT YOUR DEVICE, SKIP THIS AND GO TO HOW TO INSTALL CUSTOM RECOVERY!
Step 1)Get the CF root file compatabile to your vairant from here.. http://forum.xda-developers.com/showthread.php?t=2466423
Step 2) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 3) Now open ODIN on your PC and connect your Galaxy Note 3 to your computer.
Step 4) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 5) Click on pda in odin (if odin 3.09 choose AP) and choose the ".tar" file.
Step 6) Tick "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart
How To Install Custom Recovery
Download The Recovery Image You Want
For TWRP:
Download TWRP IMG From Here:
http://dl.twrp.me/ha3g/
(I dont have other recovery img links.. its your homework )
After downloading go to playstore and download :
Flashify: https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
AFter Installing Flashify Open it and grant SuperSu Permission
Then Choose: Recovey Image
Then: Choose A File And browse the twrp.img file you downloaded and Select it and select yup..
It Will Flash TWRP For Your Phone
And Then Select Reboot.. It Will Reboot Into TWRP Recovery
ROCK AND ROLL NOW
Credits:
@CF-Auto-Root
@TWRP Recovery

not working for me,it starts for few second and then i get the message GAIL

shalilou said:
not working for me,it starts for few second and then i get the message GAIL
Click to expand...
Click to collapse
Which Note 3 You Have?
This Method Is Tested In Note N900 Indian Official 5.0

Is there root for Note 3 N900s available?

If you wanna root kitkat its available but if you want rootfor lollipop its not available now... may be out soon.. you can check yourself from cf root website.. only n900s kitkat available
Sent from my SM-N900 using XDA Free mobile app

tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !

Miaow93 said:
tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !
Click to expand...
Click to collapse
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..

dhanmohan said:
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..
Click to expand...
Click to collapse
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP

Miaow93 said:
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP
Click to expand...
Click to collapse
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..

dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god

Miaow93 said:
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god
Click to expand...
Click to collapse
ohh i don't know about cwm as i don't use them

While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app

skssha said:
While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app
Click to expand...
Click to collapse
you mean usb debugging should turn off while installing recovery!

Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.

Prolab said:
Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.
Click to expand...
Click to collapse
Just wondering, has your KNOX been triggered?

Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes rooting device will trigger Knox.. If you want to reset Knox there's a method in general section I guess.. Boot loader but its for kk.. If u flash it,it will cause bootloop can reset Knox then u have to flash stock and u r fully official

Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes, with this method.

help
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop

Mr_Za said:
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop
Click to expand...
Click to collapse
Just download cf root of your version and make sure that cf file is for lollipop of ur note 3 version and follow the process

Thank you I rooted my device successfully