I got a weird issue, I re-partitioned my S4 to 11GB and everything worked fine.
But when I revert back to 8GB the mobile doesn't get recognized by any computer.
I tried stock and custom, Kitkat, Lollipop, and Marshmallow but no luck.
Tried connecting it while in recovery mode, GearCM or TWRP v3, still no luck.
The only way to fix this is by re-partitioning it to 11GB again.
Any solution? Anyone faced that before?
Have you tried flashing the stock ROM with a PIT file?
GDReaper said:
Have you tried flashing the stock ROM with a PIT file?
Click to expand...
Click to collapse
I flashed two different Stock ROMs with different PIT files but no luck.
I even done a Nand Erase All with different PIT files, but still I can't get it recognized to any PC.
aboodyaiman said:
I flashed two different Stock ROMs with different PIT files but no luck.
I even done a Nand Erase All with different PIT files, but still I can't get it recognized to any PC.
Click to expand...
Click to collapse
So why don't you keep it 11GB? Why do you want to go back?
GDReaper said:
So why don't you keep it 11GB? Why do you want to go back?
Click to expand...
Click to collapse
I'm keeping it 11GB, but some ROMs doesn't support 11GB, such as RR ROM...
If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom
khatkhatik said:
If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom
Click to expand...
Click to collapse
Any bootloader/modem? I got the OL1 and PB2 one's.
aboodyaiman said:
Any bootloader/modem? I got the OL1 and PB2 one's.
Click to expand...
Click to collapse
any modem : yup (just be a lollipop one)
any bootloader : nope
bootloader must has param.bin
Sorry for hijacking,
If you need param.bin, I've this one stored on my cloud storage. Feel free to use it.
param_i9500.zip
Edit:
Could be flashed over 8GB or 11GB pit.
Sent from my ASUS_Z00A using XDA Labs
khatkhatik said:
If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom
Click to expand...
Click to collapse
IT WORKED!! Thank you so much
But I got a little question, it's 8867 in size while I got a pit that makes it 8888, do you think it's because of that pit file I got?
krasCGQ said:
Sorry for hijacking,
If you need param.bin, I've this one stored on my cloud storage. Feel free to use it.
param_i9500.zip
Edit:
Could be flashed over 8GB or 11GB pit.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
I was waiting for this <3 Thank you.
aboodyaiman said:
IT WORKED!! Thank you so much
But I got a little question, it's 8867 in size while I got a pit that makes it 8888, do you think it's because of that pit file I got?
Click to expand...
Click to collapse
idk bc I didnt use 8gb pit for a long time
I think all the 8gb pit are same but ur case is weird
u can check ur pit files exact partition size with a software called "PIT Magic v1.3.10"
:good:
here is what i did.
in BL i put the param.bin
in AP i put twrp
in CP i put the modem
in PIT i put the 8gb pit file.
then boot into twrp and format each partition (no errors) and now i am flashing the stock rom.
did i do it correctly?
darkilong said:
here is what i did.
in BL i put the param.bin
in AP i put twrp
in CP i put the modem
in PIT i put the 8gb pit file.
then boot into twrp and format each partition (no errors) and now i am flashing the stock rom.
did i do it correctly?
Click to expand...
Click to collapse
I need to put a special note, that you need to format /data as ext3 first and format it again as ext4 as the direct format doesn't work.
Sent from my ASUS_Z00A using XDA Labs
krasCGQ said:
I need to put a special note, that you need to format /data as ext3 first and format it again as ext4 as the direct format doesn't work.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
how do i do this?
all i did in twrp is i went to wipe then advance then check then swipe.
darkilong said:
how do i do this?
all i did in twrp is i went to wipe then advance then check then swipe.
Click to expand...
Click to collapse
Tick data, select Change File System, select ext3, swipe, repeat but select ext4 instead.
Sent from my ASUS_Z00A using XDA Labs
krasCGQ said:
Tick data, select Change File System, select ext3, swipe, repeat but select ext4 instead.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
update:
i tried what you suggested, reflashing stock rom now. encountered same problem even in twrp, the phone reboots itself.
god help me i am trying to fix this for 2 days now.
=======
Here is the problem that i am encountering right now.
i am not sure what i am doing wrong, and this time whenever i flash something from recovery the phone reboots.
here are the things i did, using philz touch, i chose the install new rom (i do this everytime when flashing a new rom) then flash RR, was able to finish it but stuck in boot loop. so followed the same steps and flashed 2 other roms, infernus and halcycon (used these roms before) however before finishing the installation the phone reboots.
next step i flashed twrp via odin (success) and flashed the latest version via twrp recovery. guess what same problem, with RR it is stuck in boot loop while with other roms, it does not complete the installation. this thing never happened to me.
next step i used this adb thing and i believe it is successful, however same problem persists.
the only thing i can think of is to flash the original i9500 firmware which i am downloading right now and will flash it via odin.
darkilong said:
update:
i tried what you suggested, reflashing stock rom now. encountered same problem even in twrp, the phone reboots itself.
god help me i am trying to fix this for 2 days now.
=======
Here is the problem that i am encountering right now.
i am not sure what i am doing wrong, and this time whenever i flash something from recovery the phone reboots.
here are the things i did, using philz touch, i chose the install new rom (i do this everytime when flashing a new rom) then flash RR, was able to finish it but stuck in boot loop. so followed the same steps and flashed 2 other roms, infernus and halcycon (used these roms before) however before finishing the installation the phone reboots.
next step i flashed twrp via odin (success) and flashed the latest version via twrp recovery. guess what same problem, with RR it is stuck in boot loop while with other roms, it does not complete the installation. this thing never happened to me.
next step i used this adb thing and i believe it is successful, however same problem persists.
the only thing i can think of is to flash the original i9500 firmware which i am downloading right now and will flash it via odin.
Click to expand...
Click to collapse
Do you have the original firmware? If so put it in AP and the 8GB pit file and tick the Nand Earse All, wait for the ROM to be booted, reboot into stock recovery and do a full wipe (factory reset and cache) then reboot.
Then flash TWRP and try to install the RR one and give me your feedback.
aboodyaiman said:
Do you have the original firmware? If so put it in AP and the 8GB pit file and tick the Nand Earse All, wait for the ROM to be booted, reboot into stock recovery and do a full wipe (factory reset and cache) then reboot.
Click to expand...
Click to collapse
it failed, write failed it says in odin
Related
Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?
eric-filth said:
Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?
Click to expand...
Click to collapse
where from did u download firmware does it support odin
download from here http://forum.xda-developers.com/showthread.php?t=1704668
and carefully follow the instructions
after unzipping if it is one file dont forget to go to cwm and wipe data,cache partition,dalvick cache factory reset
if it contain three or more files then do the following
In Odin click the PDA button and select the PLATFORM file, click the CSC button and select the CSC file and finally click the BOOTLOADER button and select the BOOTLOADER file
eric-filth said:
Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?
Click to expand...
Click to collapse
Can you get back in to Download mode and install a custom recovery? If so, try that, then use the recovery to flash your ROM.
muddasir121 said:
where from did u download firmware does it support odin
download from here http://forum.xda-developers.com/showthread.php?t=1704668
and carefully follow the instructions
after unzipping if it is one file dont forget to go to cwm and wipe data,cache partition,dalvick cache factory reset
if it contain three or more files then do the following
In Odin click the PDA button and select the PLATFORM file, click the CSC button and select the CSC file and finally click the BOOTLOADER button and select the BOOTLOADER file
Click to expand...
Click to collapse
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
bill.weckel said:
Can you get back in to Download mode and install a custom recovery? If so, try that, then use the recovery to flash your ROM.
Click to expand...
Click to collapse
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?
eric-filth said:
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?
Click to expand...
Click to collapse
You stated in the OP that you had a 32 GB, so you'll need a 32 GB .PIT. However, I don't believe that is your problem as a .PIT defines the partition table layout on the device. That should not have been changed at all. I'd try redownloading the ROM you want and try again, or I'd choose another ROM. Also, are you 100% sure that the ROM you are using is compatible with your tablet?
eric-filth said:
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?
Click to expand...
Click to collapse
cwm recovery has an option to mount sd card did u try that. did u try with kies
bill.weckel said:
You stated in the OP that you had a 16 GB, so you'll need the 16 GB .PIT. However, I don't believe that is your problem as a .PIT defines the partition table layout on the device. That should not have been changed at all. I'd try redownloading the ROM you want and try again, or I'd choose another ROM. Also, are you 100% sure that the ROM you are using is compatible with your tablet?
Click to expand...
Click to collapse
The firmware is P5110XXCLK7_P5110OXACLK7_HOME
Now, i tried only for test flash CWM "GT-P5110_ClockworkMod-Recovery_6.0.1.0.tar" via ODIN and i got this error
Fail to download [8|SOS] [Data:2840(.0) > Part:2560(/2560)] (2kb unit)
Tegra_Nand_Write: Error to DownloadPartition_odin![err:0xfffffffff]
Ow my god im very sad.
I change firmware all my life with S2 and S3 and now this tab 2 give me this?
muddasir121 said:
cwm recovery has an option to mount sd card did u try that
Click to expand...
Click to collapse
Mine not, only mount system, efs, preload, data
remove SD card from tab, put it in another phone or card reader to transfer ROM and flash
nasty007 said:
remove SD card from tab, put it in another phone or card reader to transfer ROM and flash
Click to expand...
Click to collapse
He can't mount his external sdcard with the recovery he's using.
Might be a good idea to switch recoveries first
nasty007 said:
remove SD card from tab, put it in another phone or card reader to transfer ROM and flash
Click to expand...
Click to collapse
But CWM installed in my TAB is 5.5.0.4 and dont have option to install from external sd, only internal,
eric-filth said:
But CWM installed in my TAB is 5.5.0.4 and dont have option to install from external sd, only internal,
Click to expand...
Click to collapse
does it say mount to preload i think may be it is alternnative of internal sd
bill.weckel said:
He can't mount his external sdcard with the recovery he's using.
Might be a good idea to switch recoveries first
Click to expand...
Click to collapse
I tried now put TWRP and same error
Fail to download [8|SOS] [Data:2840(.0) > Part:2560(/2560)] (2kb unit)
Tegra_Nand_Write: Error to DownloadPartition_odin![err:0xfffffffff]
TAB 2 have bootloader locked? Or i saying bull****?
Looking the message of error with my little knowlodge saying the problem is partitions are changed and he cannot write correctly
muddasir121 said:
does it say mount to preload i think may be it is alternnative of internal sd
Click to expand...
Click to collapse
Doesn't work too.
I cant believe this.
Download working, CWM Working and i cant do nothing to repair my tab.
A little smile might help dude. Frustration is always an obstacle.
Checklist
- is your md5 file correct for your unit?
- is your md5 file not corrupted.
- permission in recovery set?
- cable, pc and tab identifies each other?
- try it step by step
- try different correct pit and md5 download.
Sent from my GT-P3100 using xda premium
I tried diffrent firmware (default when i buyed the Tab) and a have error too. Said the cache partition is to small
So i tried 2 differents .pit files and the errors are:
Im believe what Mobile Odin ****ed all my partitions (cache, system......) Impressive
Hit up chainfire.
sent from MY BAD A$$ ET4G
I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
E:failed to mount /data (No such file or directory)
E: failed to mount /sdcard (File exists)
E: copy_cache _media: Can't mount /sdcard
your storage not prepared yet,p lese use UI menu for format and reboot actions
Click to expand...
Click to collapse
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...
jutopa said:
I was flashing with ODIN and accidently exchange some parts of the Firmware.
In PDA I put CSC
In CSC I put PDA
Now, I get this error in recovery
I have one funtional phone. Can I copy my internal sd cards files and pushed to my bricked phone to make it work?
I have tried all ODIN flashing combinations. Nothing works. Full KPE, Full DDFL2
I'm desparate...
Click to expand...
Click to collapse
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...
deDante said:
had experienced this problem, put wrong file on odin, do clean install from froyo and this problem solved for me...
put PIT and repartition first, than start process, after that flash froyo...
Click to expand...
Click to collapse
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
Froyo has diferent bootloader than gb,ics,jb and kk. Try to flash only pit pull battery and then flash full ddlf2 with all files except pit. Good luck.
jutopa said:
I try to do that.
Flashed PIT
Put Start
Pulled back battery, dowload mode again
Put PDA, PHONE and CSC from KB3 (FROYO) ( Didn't found anyone with Bootloader, I guess it's normal)
Still the same
Click to expand...
Click to collapse
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...
deDante said:
like I mentioned before, put PIT from Froyo and thick repartition first, after that flash Froyo ROM...also backup efs after flashing Froyo, and continue your work, CMIIW...
Click to expand...
Click to collapse
Didn't work. Pretty sure that internal sd is broken.. hardware problem.
jutopa said:
Didn't work. Pretty sure that internal sd is broken.. hardware problem.
Click to expand...
Click to collapse
after flashing you get success Froyo on your device or not???
deDante said:
after flashing you get success Froyo on your device or not???
Click to expand...
Click to collapse
Noup. Reboots into recovery and got error message in recovery (the one I quoted before). After reboot, bootloop in samsung logo.
you got PASS message on odin after you flash froyo???
if PASS message appear you should be got success froyo installing and you can continue to backup you efs..
Sent from my GT-I9003 using XDA Premium 4
Hello All,
My N8020 is now semi brick after trying to flash it back to stock.It was on custom rom before but showing different errors so i decided to change the rom...First i tried to install another custom rom which was cynogenmod 10 but after intstalling this rom from cwm phone stuck at cynogenmod startup logo i waited for long time but still nothing.Then tried different versions of cynogen roms but same...After all this i decided to install a official rom so i flashed this with
N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar
but now the real problem started..Now i can boot phone in download mode but not in recovery mode at all...Then i tried to flash a cwm via odin and get "PASS" messege in odin but still no recovery mode...Tried to flash to flash clockwork recovery several time but nothing changed and then i check in download mode the custom flash counter increase every time i try to flash cwm...then i searched the stock recovery for 8020 but when i try to flash it via odin i always get "FAIL"...
Now i m out of ideas and searching for a real solution....SO can anybody please tell me what to do next to get it back to life???
Regards,
Muneeb
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thanks for reply but can u please tell me from where i get n8020 twrp?i only able to find N8000 to N8013 but cant find for N8020....
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thnx but its still same..did this as per your instructions but tablet still on samsung galaxy note 10.1 logo i have pressed the vol up for long time but nothing...One more thing that one more count added to custom binary download.
Still no luck...
I'm sorry to hear that. I hope you'll find a solution soon.
Sent from my Nexus 5 using Tapatalk
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
MUNEEB_AKHTAR_RAZA said:
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
Click to expand...
Click to collapse
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
KDKobes said:
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
Click to expand...
Click to collapse
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
MUNEEB_AKHTAR_RAZA said:
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
Click to expand...
Click to collapse
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
KDKobes said:
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
Click to expand...
Click to collapse
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
I didn't find a working pit for my n 8010. Don't worry too much about the binary counter, mine was 118 today, I reset it with triangle away. I don't have the balls to do a nand erase on mine, I'm not even sure that is required for my problem, at least mine is working.
Sent from my Nexus 5 using Tapatalk
MUNEEB_AKHTAR_RAZA said:
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
Click to expand...
Click to collapse
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
KDKobes said:
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
Click to expand...
Click to collapse
Never ticked this option yet...So you suggest me to do so?
MUNEEB_AKHTAR_RAZA said:
Never ticked this option yet...So you suggest me to do so?
Click to expand...
Click to collapse
Yes, dont check auto boot though leave that unchecked and if it passes reboot to recovery and do a data wipe then reboot. If you run into error add your pit file to the pit window along with your stock tar.md5 file and run it just as I mentioned before with repartition selected
Make sure the pit file you use is for your device model/storage size
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
pilo_kulet said:
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
Click to expand...
Click to collapse
Last post 2014 poster no longer active on the forum .
TWRP and CWM see development threads .
Oddly enough a notification was sent to my email. That's correct though I'm no longer active in this forum.
Here is all I have left on the Galaxy Note 10.1, anything else you need you will have to find.
https://drive.google.com/open?id=0B-BP_JVn6T1Mb1o4UXVUYUpnc0E
Thanks for that .
I PM the mods is probably why you got the message .
Sadly/ logically this forum is nearly dead .
Hi there,
I have a Samsung Galaxy Note 10.1 WIFI (GT-N8010). I had it rooted, custom ROM on it.....frequently forced closes so i decided to cleensweep the thing. Went into TWRP....did factory reset (wipe cache, Dalvik and System) and then formatted DATA.
So no OS anymore.
Then when i wanted to flash the custom ROM (from external SD like i always do) again.....it got stuck.......couldnt flash it it said. Okay.....so.....now what i thought. I tried the procedure of flashing with the galaxy Toolkit. Doesnt work because it waits for "debug enable"....but there is no OS.....so cant do that.
Then i made the biggest mistake i guess.
I flashed new firmware through ODIN.....but accidently for the GT-N8000. Strange that the procedure went well.
Then it came: the device got stuck on the Samsung logo.....no bootloop....just the logo. When i restarted the tablet it went strait to download mode (power and vol - normally) I dont even get the choice of cancelling or continue to download mode. The screen looks like this:
ODIN MODE
product name: gt-n8000
current binary: samsung official
system status: custom
(and then in gray) RP SWREV: A2
And NO custom binary download: no
When i go into recovery mode (power and vol+) it goes strait to the android with "downloading, do not turn off device"
WHAT HAPPENED ????
And does somebody know what to do PRETTY PLEASE
Hope you guys know what to do....or is it bricked ????
PS. It's still seen by Odin !
Greetz from the netherlands
I had the same problem as you, and I had to flash via Odin v3.09 a firmware 4.4.2 and it rebooted fine.
crombull said:
I had the same problem as you, and I had to flash via Odin v3.09 a firmware 4.4.2 and it rebooted fine.
Click to expand...
Click to collapse
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
Thnx for the reply
PassieWater said:
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
Thnx for the reply
Click to expand...
Click to collapse
I have a similar problem and can't flash original firmware via odin. could you send me the pit file you have used?
Thanks in advance!
I just sent you the pit file through mail
Hope it helps
Bricked since updated to KitKat - Odin flashes fail!!
PassieWater said:
I just sent you the pit file through mail
Hope it helps
Click to expand...
Click to collapse
Could I please have a secure PIT file for the GT-N8010 16GB bought in France? I've bricked my Note 10.1 after updating to the official Kitkat (N8010XXUDNE4_N8010OXXDNF1_HOME.tar.md5). I did a wipe data and cache and all seemed to be working fine for 2 days... but the tablet got stuck on a game and after a force close has been stuck in a bootloop with no access to recovery mode. I do manage to get into download mode and have tried to flash a number of times with different roms (going back seems to be impossible with KitKat) but to no avail as I keep getting an issue about 'no PIT partition'. I took it to a shop (as my warranty ran out a month ago - lucky me!) and they were also unable to flash the tablet so the issue does not seem to be the cable or the drivers (as Odin recognizes the tablet). I tried flashing with a PIT file (ticking re-partition with and without the kitkat rom) that I got on some website but I'm not certain it is the right one for my GT-N8010 and it also fails. Before I try a Nand erase I want to make sure that I have the right PIT file. By the way does the PIT file you have work with KitKat as the one I found seems to be for an outdated version of Android and as Kitkat doesn't enable one to go back to an older version of Android I'm in a catch 22 with only the Nand erase option left?
FYI, I tried flashing a recovery like TWP to try flashing custom roms but it also doesn't work.
Any other ideas? Should I tick Nand Erase and Phone EFS Clear. As the issue seems to be the kitkat bootloader is it possible to flash a bootloader? Can't find any trace of anything other than the tar files for GT-N8010 in Jelly Bean or KitKat. Anybody have a bootloader, PDA, CSC and Phone file for the GT-N8010? Can one attempt the following on a GT-N8010: http://forum.xda-developers.com/showthread.php?t=2610757&page=2 ?
Thanks for any help as I've been without my tablet for weeks now!!:crying:
Need PIT file for GT-N8010 16GB under Kitkat
Any PIT file please? Thanks!
Same problem here
PassieWater said:
I just sent you the pit file through mail
Hope it helps
Click to expand...
Click to collapse
can you send me that pit file too, please?
Me too!
I'd like that file too...
I just flashed the wrong bootloader file onto my N8010. Luckily it's still working!
Still looking for the correct KitKat bootloader, but I'd happily take the pit file and see if that works.
Pretty Please!
PassieWater said:
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
I have the same problem... flashed 4.4.2 on a North American Galaxy Note 10.1 (2012) with Odin and am stuck in downloading mode.
Can someone send me the pit file I require? Please!
Click to expand...
Click to collapse
Lucky me! Flashing the wrong bootloader probably didn't work. I was able to flash a stock KitKat rom yesterday and my device still seems to have a working pit file.
Details: German Note 10.1 GT N8010 updated to KitKat, but the pit file seems to be older. Any other info needed?
This is how I got the pit file.
Code:
sudo heimdall download-pit --output Samsung-Note-10.1-PIT.txt
I had trouble opening the result in a text editor, so I'm not sure, I got it right. You'll probably have to rename it... Let's see, if I'm allowed to upload.
mendacium said:
Lucky me! Flashing the wrong bootloader probably didn't work. I was able to flash a stock KitKat rom yesterday and my device still seems to have a working pit file.
Details: German Note 10.1 GT N8010 updated to KitKat, but the pit file seems to be older. Any other info needed?
This is how I got the pit file.
Code:
sudo heimdall download-pit --output Samsung-Note-10.1-PIT.txt
I had trouble opening the result in a text editor, so I'm not sure, I got it right. You'll probably have to rename it... Let's see, if I'm allowed to upload.
Click to expand...
Click to collapse
Thanks... Any idea what the name of the original PIT file is?
(I believe it should have the .pit extension. I hope I can rename this file accordingly?)
Sorry, no.
Heimdall doesn't seem to care how the file is named. I'd hazard a guess, that it's similar for most Samsung devices.
help please. .
Hi
Any chance of sending me the PIT file. . I did the same! :'(
Thanks in advance .
.
My friend was installing the twrp to root a J7 metal.
Now the cell phone does not restart, and I do not know what the **** it did KKkkkkkkkkkk
It wants to remove the twrp without formatting the device.
If installing the original rom by Odin using home_csc does it return to normal without formatting?
open the program odin, select the section PIT, put all the checkboxes and flash. The PIT. file can take from the archive of the stock firmware zip.
CPI Justiceiro said:
My friend was installing the twrp to root a J7 metal.
Now the cell phone does not restart, and I do not know what the **** it did KKkkkkkkkkkk
It wants to remove the twrp without formatting the device.
If installing the original rom by Odin using home_csc does it return to normal without formatting?
Click to expand...
Click to collapse
You must wipe System IS modified beetween Stock and Customs roms
alik23kz said:
open the program odin, select the section PIT, put all the checkboxes and flash. The PIT. file can take from the archive of the stock firmware zip.
Click to expand...
Click to collapse
That is, I just get the PIT file and put it in the Odin field, mark these boxes that you mentioned and click on Flash Will not this format the phone? Because it can not be formatted otherwise you will lose all the data ...
CPI Justiceiro said:
That is, I just get the PIT file and put it in the Odin field, mark these boxes that you mentioned and click on Flash Will not this format the phone? Because it can not be formatted otherwise you will lose all the data ...
Click to expand...
Click to collapse
this method will completely erase the phone's memory, but will restore it to the factory state
alik23kz said:
this method will completely erase the phone's memory, but will restore it to the factory state
Click to expand...
Click to collapse
This is the problem, he could not lose the data of the device ... would be to use the method of installation of the complete rom in Odin but using the home-csc we would be able to return the system without losing the data?
CPI Justiceiro said:
This is the problem, he could not lose the data of the device ... would be to use the method of installation of the complete rom in Odin but using the home-csc we would be able to return the system without losing the data?
Click to expand...
Click to collapse
I don't know, but probably not,
Stock recovery
CPI Justiceiro said:
This is the problem, he could not lose the data of the device ... would be to use the method of installation of the complete rom in Odin but using the home-csc we would be able to return the system without losing the data?
Click to expand...
Click to collapse
You may be able to pull the stock recovery from the AP file of the firmware an flash just that with odin !
That may work for you !
peter couniaz said:
You may be able to pull the stock recovery from the AP file of the firmware an flash just that with odin !
That may work for you !
Click to expand...
Click to collapse
So if I just use the AP file that has inside the ZIP of the rom I can recover the original Recovery and so the system can restart the boot without needing to format and lose the data?
Sorry for so many questions but it is a delicate situation and really he can not lose the data of the device.
Stock recovery
CPI Justiceiro said:
So if I just use the AP file that has inside the ZIP of the rom I can recover the original Recovery and so the system can restart the boot without needing to format and lose the data?
Click to expand...
Click to collapse
No if you pull the stock recovery img from the AP file in the zip you can make tar file so you can flash just the stock recovery an get twrp out of the phone !
If you flash the hole AP file you will format the phone ! At that point mite as well all four files !