Database Info

URGENT! Mobile Odin ******* my Tab2 10.1, what i do?

Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?

eric-filth said:
Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?
Click to expand...
Click to collapse
where from did u download firmware does it support odin
download from here http://forum.xda-developers.com/showthread.php?t=1704668
and carefully follow the instructions
after unzipping if it is one file dont forget to go to cwm and wipe data,cache partition,dalvick cache factory reset
if it contain three or more files then do the following
In Odin click the PDA button and select the PLATFORM file, click the CSC button and select the CSC file and finally click the BOOTLOADER button and select the BOOTLOADER file

eric-filth said:
Guys i will try explain the best possible with my poor english.
Model P5510 32GB had super user and mobile odin installed with Android 3.1, ok...
So i load the new firmware 4.1.1 inside Mobile Odin and Flash Firmware
Write recovery, Kernel, System and after this stuck on mobile odin screen i wait about 10min and same. So i turn power off and power on and stuck on LOGO.
So i tried flash via Odin 1.87, i entered Download Mode and PDA choose the firmware... start to copy but stuck on the first file.
What i do ?
.pit fix my problem? If yes, what i use?
Click to expand...
Click to collapse
Can you get back in to Download mode and install a custom recovery? If so, try that, then use the recovery to flash your ROM.

muddasir121 said:
where from did u download firmware does it support odin
download from here http://forum.xda-developers.com/showthread.php?t=1704668
and carefully follow the instructions
after unzipping if it is one file dont forget to go to cwm and wipe data,cache partition,dalvick cache factory reset
if it contain three or more files then do the following
In Odin click the PDA button and select the PLATFORM file, click the CSC button and select the CSC file and finally click the BOOTLOADER button and select the BOOTLOADER file
Click to expand...
Click to collapse
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
bill.weckel said:
Can you get back in to Download mode and install a custom recovery? If so, try that, then use the recovery to flash your ROM.
Click to expand...
Click to collapse
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?

eric-filth said:
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?
Click to expand...
Click to collapse
You stated in the OP that you had a 32 GB, so you'll need a 32 GB .PIT. However, I don't believe that is your problem as a .PIT defines the partition table layout on the device. That should not have been changed at all. I'd try redownloading the ROM you want and try again, or I'd choose another ROM. Also, are you 100% sure that the ROM you are using is compatible with your tablet?

eric-filth said:
I got UK 4.1.1 from Sammobile
I choose .tar.md5 to PDA and have error
Yes i can enter in CWM Recovery but i dont have any custom .zip inside internal card. How i can transfer files from computer to tablet without SO?
I want to try pit file, but i dont know the corret pit for me.
signed_espresso_20120220_8G.pit
or
signed_espresso_20120220_16G.pit
?
Click to expand...
Click to collapse
cwm recovery has an option to mount sd card did u try that. did u try with kies

bill.weckel said:
You stated in the OP that you had a 16 GB, so you'll need the 16 GB .PIT. However, I don't believe that is your problem as a .PIT defines the partition table layout on the device. That should not have been changed at all. I'd try redownloading the ROM you want and try again, or I'd choose another ROM. Also, are you 100% sure that the ROM you are using is compatible with your tablet?
Click to expand...
Click to collapse
The firmware is P5110XXCLK7_P5110OXACLK7_HOME
Now, i tried only for test flash CWM "GT-P5110_ClockworkMod-Recovery_6.0.1.0.tar" via ODIN and i got this error
Fail to download [8|SOS] [Data:2840(.0) > Part:2560(/2560)] (2kb unit)
Tegra_Nand_Write: Error to DownloadPartition_odin![err:0xfffffffff]
Ow my god im very sad.
I change firmware all my life with S2 and S3 and now this tab 2 give me this?

muddasir121 said:
cwm recovery has an option to mount sd card did u try that
Click to expand...
Click to collapse
Mine not, only mount system, efs, preload, data

remove SD card from tab, put it in another phone or card reader to transfer ROM and flash

nasty007 said:
remove SD card from tab, put it in another phone or card reader to transfer ROM and flash
Click to expand...
Click to collapse
He can't mount his external sdcard with the recovery he's using.
Might be a good idea to switch recoveries first

nasty007 said:
remove SD card from tab, put it in another phone or card reader to transfer ROM and flash
Click to expand...
Click to collapse
But CWM installed in my TAB is 5.5.0.4 and dont have option to install from external sd, only internal,

eric-filth said:
But CWM installed in my TAB is 5.5.0.4 and dont have option to install from external sd, only internal,
Click to expand...
Click to collapse
does it say mount to preload i think may be it is alternnative of internal sd

bill.weckel said:
He can't mount his external sdcard with the recovery he's using.
Might be a good idea to switch recoveries first
Click to expand...
Click to collapse
I tried now put TWRP and same error
Fail to download [8|SOS] [Data:2840(.0) > Part:2560(/2560)] (2kb unit)
Tegra_Nand_Write: Error to DownloadPartition_odin![err:0xfffffffff]
TAB 2 have bootloader locked? Or i saying bull****?
Looking the message of error with my little knowlodge saying the problem is partitions are changed and he cannot write correctly

muddasir121 said:
does it say mount to preload i think may be it is alternnative of internal sd
Click to expand...
Click to collapse
Doesn't work too.
I cant believe this.
Download working, CWM Working and i cant do nothing to repair my tab.

A little smile might help dude. Frustration is always an obstacle.
Checklist
- is your md5 file correct for your unit?
- is your md5 file not corrupted.
- permission in recovery set?
- cable, pc and tab identifies each other?
- try it step by step
- try different correct pit and md5 download.
Sent from my GT-P3100 using xda premium

I tried diffrent firmware (default when i buyed the Tab) and a have error too. Said the cache partition is to small
So i tried 2 differents .pit files and the errors are:
Im believe what Mobile Odin ****ed all my partitions (cache, system......) Impressive

Hit up chainfire.
sent from MY BAD A$$ ET4G

Can I chech repartition in odin, without .pit?

I flashed P6800XXLQB_P6800OXXLQ8_P6800XXLPW_HOME.tar.md5 as PDA, but it left all my apps. I want to fully format the memory and flash the PDA. Can I do that without .pit?

nope, just enter stock recovery and do a factory reset

heyjoe66 said:
nope, just enter stock recovery and do a factory reset
Click to expand...
Click to collapse
Thanks, did that, now it says my CSC is KOR. Is that bad?

not at all, if it's working fine and has the language of your preference

[Completed] Odin doesn't work - messed up partitions?

help when i use odin it doesn't do anything, everything is still the same when it boots
i did as im supposed to -> http://pasteboard.co/WYxqdEN.png
I think I have messed up partitions from link2SD or something...do I need a pit file?
if i format (and brick) my phone with safestrap...would odin work then?
do i need a bl file?

freecore.mc said:
help when i use odin it doesn't do anything, everything is still the same when it boots
i did as im supposed to -> http://pasteboard.co/WYxqdEN.png
I think I have messed up partitions from link2SD or something...do I need a pit file?
if i format (and brick) my phone with safestrap...would odin work then?
do i need a bl file?
Click to expand...
Click to collapse
For restoring partitions you will need a pit file and for restoring the /system and /preload you'll need the PDA file.
Cheers.

I9500 11GB reverting to 8GB

I got a weird issue, I re-partitioned my S4 to 11GB and everything worked fine.
But when I revert back to 8GB the mobile doesn't get recognized by any computer.
I tried stock and custom, Kitkat, Lollipop, and Marshmallow but no luck.
Tried connecting it while in recovery mode, GearCM or TWRP v3, still no luck.
The only way to fix this is by re-partitioning it to 11GB again.
Any solution? Anyone faced that before?

Have you tried flashing the stock ROM with a PIT file?

GDReaper said:
Have you tried flashing the stock ROM with a PIT file?
Click to expand...
Click to collapse
I flashed two different Stock ROMs with different PIT files but no luck.
I even done a Nand Erase All with different PIT files, but still I can't get it recognized to any PC.

aboodyaiman said:
I flashed two different Stock ROMs with different PIT files but no luck.
I even done a Nand Erase All with different PIT files, but still I can't get it recognized to any PC.
Click to expand...
Click to collapse
So why don't you keep it 11GB? Why do you want to go back?

GDReaper said:
So why don't you keep it 11GB? Why do you want to go back?
Click to expand...
Click to collapse
I'm keeping it 11GB, but some ROMs doesn't support 11GB, such as RR ROM...

If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom

khatkhatik said:
If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom
Click to expand...
Click to collapse
Any bootloader/modem? I got the OL1 and PB2 one's.

aboodyaiman said:
Any bootloader/modem? I got the OL1 and PB2 one's.
Click to expand...
Click to collapse
any modem : yup (just be a lollipop one)
any bootloader : nope
bootloader must has param.bin

Sorry for hijacking,
If you need param.bin, I've this one stored on my cloud storage. Feel free to use it.
param_i9500.zip
Edit:
Could be flashed over 8GB or 11GB pit.
Sent from my ASUS_Z00A using XDA Labs

khatkhatik said:
If u odin a stock rom over 11GB partition the bluetooth doesnt work
u must do the steps that u did to go to 11GB exactly but pit file that must be 8GB one
so do this steps before odin a stock
1st backup efs and so on
2nd odin these files
1. a bootloader file that has param.bin as BL in odin
2. TWRP recovery as AP
3. a modem as CP
4. JA3G_EUR_OPEN.pit as 8GB pit
after odin it go to twrp advanced format all partition (except external) step by step not all together (u will see a lot of error after formating do this step again until there was no error )
then odin a stock rom
Click to expand...
Click to collapse
IT WORKED!! Thank you so much
But I got a little question, it's 8867 in size while I got a pit that makes it 8888, do you think it's because of that pit file I got?

krasCGQ said:
Sorry for hijacking,
If you need param.bin, I've this one stored on my cloud storage. Feel free to use it.
param_i9500.zip
Edit:
Could be flashed over 8GB or 11GB pit.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
I was waiting for this <3 Thank you.

aboodyaiman said:
IT WORKED!! Thank you so much
But I got a little question, it's 8867 in size while I got a pit that makes it 8888, do you think it's because of that pit file I got?
Click to expand...
Click to collapse
idk bc I didnt use 8gb pit for a long time
I think all the 8gb pit are same but ur case is weird
u can check ur pit files exact partition size with a software called "PIT Magic v1.3.10"
:good:

here is what i did.
in BL i put the param.bin
in AP i put twrp
in CP i put the modem
in PIT i put the 8gb pit file.
then boot into twrp and format each partition (no errors) and now i am flashing the stock rom.
did i do it correctly?

darkilong said:
here is what i did.
in BL i put the param.bin
in AP i put twrp
in CP i put the modem
in PIT i put the 8gb pit file.
then boot into twrp and format each partition (no errors) and now i am flashing the stock rom.
did i do it correctly?
Click to expand...
Click to collapse
I need to put a special note, that you need to format /data as ext3 first and format it again as ext4 as the direct format doesn't work.
Sent from my ASUS_Z00A using XDA Labs

krasCGQ said:
I need to put a special note, that you need to format /data as ext3 first and format it again as ext4 as the direct format doesn't work.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
how do i do this?
all i did in twrp is i went to wipe then advance then check then swipe.

darkilong said:
how do i do this?
all i did in twrp is i went to wipe then advance then check then swipe.
Click to expand...
Click to collapse
Tick data, select Change File System, select ext3, swipe, repeat but select ext4 instead.
Sent from my ASUS_Z00A using XDA Labs

krasCGQ said:
Tick data, select Change File System, select ext3, swipe, repeat but select ext4 instead.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
update:
i tried what you suggested, reflashing stock rom now. encountered same problem even in twrp, the phone reboots itself.
god help me i am trying to fix this for 2 days now.
=======
Here is the problem that i am encountering right now.
i am not sure what i am doing wrong, and this time whenever i flash something from recovery the phone reboots.
here are the things i did, using philz touch, i chose the install new rom (i do this everytime when flashing a new rom) then flash RR, was able to finish it but stuck in boot loop. so followed the same steps and flashed 2 other roms, infernus and halcycon (used these roms before) however before finishing the installation the phone reboots.
next step i flashed twrp via odin (success) and flashed the latest version via twrp recovery. guess what same problem, with RR it is stuck in boot loop while with other roms, it does not complete the installation. this thing never happened to me.
next step i used this adb thing and i believe it is successful, however same problem persists.
the only thing i can think of is to flash the original i9500 firmware which i am downloading right now and will flash it via odin.

darkilong said:
update:
i tried what you suggested, reflashing stock rom now. encountered same problem even in twrp, the phone reboots itself.
god help me i am trying to fix this for 2 days now.
=======
Here is the problem that i am encountering right now.
i am not sure what i am doing wrong, and this time whenever i flash something from recovery the phone reboots.
here are the things i did, using philz touch, i chose the install new rom (i do this everytime when flashing a new rom) then flash RR, was able to finish it but stuck in boot loop. so followed the same steps and flashed 2 other roms, infernus and halcycon (used these roms before) however before finishing the installation the phone reboots.
next step i flashed twrp via odin (success) and flashed the latest version via twrp recovery. guess what same problem, with RR it is stuck in boot loop while with other roms, it does not complete the installation. this thing never happened to me.
next step i used this adb thing and i believe it is successful, however same problem persists.
the only thing i can think of is to flash the original i9500 firmware which i am downloading right now and will flash it via odin.
Click to expand...
Click to collapse
Do you have the original firmware? If so put it in AP and the 8GB pit file and tick the Nand Earse All, wait for the ROM to be booted, reboot into stock recovery and do a full wipe (factory reset and cache) then reboot.

Then flash TWRP and try to install the RR one and give me your feedback.

aboodyaiman said:
Do you have the original firmware? If so put it in AP and the 8GB pit file and tick the Nand Earse All, wait for the ROM to be booted, reboot into stock recovery and do a full wipe (factory reset and cache) then reboot.
Click to expand...
Click to collapse
it failed, write failed it says in odin

Factory reset

I have a sm-g930f and it's on Nougat then I rooted using ODIN installing a custom recovery and then the SuperSU and the phone was fine but and I removed root it got kinda laggy and some feature didn't work right like Always on Display when I open any game it told repeadeatly told me game optimizing service has stopped and now I'm thinking about a factory reset will this fix it or does this only remove the apps,data, cache from the phone also will this remove my custom recovery

userName'dYa said:
I have a sm-g930f and it's on Nougat then I rooted using ODIN installing a custom recovery and then the SuperSU and the phone was fine but and I removed root it got kinda laggy and some feature didn't work right like Always on Display when I open any game it told repeadeatly told me game optimizing service has stopped and now I'm thinking about a factory reset will this fix it or does this only remove the apps,data, cache from the phone also will this remove my custom recovery
Click to expand...
Click to collapse
Hi
how did you unroot your phone?
Root is done in a different partition , factory reset will only help if is app related if not app related safest bet would be to reflash rom with home_csc file to avoid loosing your data

MAX 404 said:
Hi
how did you unroot your phone?
Root is done in a different partition , factory reset will only help if is app related if not app related safest bet would be to reflash rom with home_csc file to avoid loosing your data
Click to expand...
Click to collapse
I unroofed using the settings in the SuperSU app

I don't care about data

userName'dYa said:
I unroofed using the settings in the SuperSU app
Click to expand...
Click to collapse
most times works but is not 100% effective , if it was working fine before unrooting it , reflash firmware again use home_csc

MAX 404 said:
most times works but is not 100% effective , if it was working fine before unrooting it , reflash firmware again use home_csc
Click to expand...
Click to collapse
I don't know how this home CSC works can I select NAND Erase all and put all the files on their places(AP,BL...)

userName'dYa said:
I don't know how this home CSC works can I select NAND Erase all and put all the files on their places(AP,BL...)
Click to expand...
Click to collapse
No , do not use that option
Use CSC ( and the other 3 ) , this file has a PIT file , it will format all partitions and do a full clean installation
Do not use home_csc , just CSC, AP BL & CP

MAX 404 said:
No , do not use that option
Use CSC ( and the other four) , this file has a PIT file , it will format all partitions and do a full clean installation
Click to expand...
Click to collapse
Are there any video tutorials of this because I don't exactly understand

Because I don't have a computer right now can I flash the superstock rom . Will this fix it

userName'dYa said:
Are there any video tutorials of this because I don't exactly understand
Click to expand...
Click to collapse
Check here
Check and read this thread on the 2 first post explains it