[Q] (Q) HELP....GT-N8010 bricked ????????? - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hi there,
I have a Samsung Galaxy Note 10.1 WIFI (GT-N8010). I had it rooted, custom ROM on it.....frequently forced closes so i decided to cleensweep the thing. Went into TWRP....did factory reset (wipe cache, Dalvik and System) and then formatted DATA.
So no OS anymore.
Then when i wanted to flash the custom ROM (from external SD like i always do) again.....it got stuck.......couldnt flash it it said. Okay.....so.....now what i thought. I tried the procedure of flashing with the galaxy Toolkit. Doesnt work because it waits for "debug enable"....but there is no OS.....so cant do that.
Then i made the biggest mistake i guess.
I flashed new firmware through ODIN.....but accidently for the GT-N8000. Strange that the procedure went well.
Then it came: the device got stuck on the Samsung logo.....no bootloop....just the logo. When i restarted the tablet it went strait to download mode (power and vol - normally) I dont even get the choice of cancelling or continue to download mode. The screen looks like this:
ODIN MODE
product name: gt-n8000
current binary: samsung official
system status: custom
(and then in gray) RP SWREV: A2
And NO custom binary download: no
When i go into recovery mode (power and vol+) it goes strait to the android with "downloading, do not turn off device"
WHAT HAPPENED ????
And does somebody know what to do PRETTY PLEASE
Hope you guys know what to do....or is it bricked ????
PS. It's still seen by Odin !
Greetz from the netherlands

I had the same problem as you, and I had to flash via Odin v3.09 a firmware 4.4.2 and it rebooted fine.

crombull said:
I had the same problem as you, and I had to flash via Odin v3.09 a firmware 4.4.2 and it rebooted fine.
Click to expand...
Click to collapse
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
Thnx for the reply

PassieWater said:
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
Thnx for the reply
Click to expand...
Click to collapse
I have a similar problem and can't flash original firmware via odin. could you send me the pit file you have used?
Thanks in advance!

I just sent you the pit file through mail
Hope it helps

Bricked since updated to KitKat - Odin flashes fail!!
PassieWater said:
I just sent you the pit file through mail
Hope it helps
Click to expand...
Click to collapse
Could I please have a secure PIT file for the GT-N8010 16GB bought in France? I've bricked my Note 10.1 after updating to the official Kitkat (N8010XXUDNE4_N8010OXXDNF1_HOME.tar.md5). I did a wipe data and cache and all seemed to be working fine for 2 days... but the tablet got stuck on a game and after a force close has been stuck in a bootloop with no access to recovery mode. I do manage to get into download mode and have tried to flash a number of times with different roms (going back seems to be impossible with KitKat) but to no avail as I keep getting an issue about 'no PIT partition'. I took it to a shop (as my warranty ran out a month ago - lucky me!) and they were also unable to flash the tablet so the issue does not seem to be the cable or the drivers (as Odin recognizes the tablet). I tried flashing with a PIT file (ticking re-partition with and without the kitkat rom) that I got on some website but I'm not certain it is the right one for my GT-N8010 and it also fails. Before I try a Nand erase I want to make sure that I have the right PIT file. By the way does the PIT file you have work with KitKat as the one I found seems to be for an outdated version of Android and as Kitkat doesn't enable one to go back to an older version of Android I'm in a catch 22 with only the Nand erase option left?
FYI, I tried flashing a recovery like TWP to try flashing custom roms but it also doesn't work.
Any other ideas? Should I tick Nand Erase and Phone EFS Clear. As the issue seems to be the kitkat bootloader is it possible to flash a bootloader? Can't find any trace of anything other than the tar files for GT-N8010 in Jelly Bean or KitKat. Anybody have a bootloader, PDA, CSC and Phone file for the GT-N8010? Can one attempt the following on a GT-N8010: http://forum.xda-developers.com/showthread.php?t=2610757&page=2 ?
Thanks for any help as I've been without my tablet for weeks now!!:crying:

Need PIT file for GT-N8010 16GB under Kitkat
Any PIT file please? Thanks!

Same problem here
PassieWater said:
I just sent you the pit file through mail
Hope it helps
Click to expand...
Click to collapse
can you send me that pit file too, please?

Me too!
I'd like that file too...
I just flashed the wrong bootloader file onto my N8010. Luckily it's still working!
Still looking for the correct KitKat bootloader, but I'd happily take the pit file and see if that works.
Pretty Please!

PassieWater said:
just flashing 4.4.2 didn't do the trick. ...odin said "fail" when trying to flash the nand. I had to flash another pit file with it. Why that had to be done I don't know. ..just read it somewhere.
I have the same problem... flashed 4.4.2 on a North American Galaxy Note 10.1 (2012) with Odin and am stuck in downloading mode.
Can someone send me the pit file I require? Please!
Click to expand...
Click to collapse

Lucky me! Flashing the wrong bootloader probably didn't work. I was able to flash a stock KitKat rom yesterday and my device still seems to have a working pit file.
Details: German Note 10.1 GT N8010 updated to KitKat, but the pit file seems to be older. Any other info needed?
This is how I got the pit file.
Code:
sudo heimdall download-pit --output Samsung-Note-10.1-PIT.txt
I had trouble opening the result in a text editor, so I'm not sure, I got it right. You'll probably have to rename it... Let's see, if I'm allowed to upload.

mendacium said:
Lucky me! Flashing the wrong bootloader probably didn't work. I was able to flash a stock KitKat rom yesterday and my device still seems to have a working pit file.
Details: German Note 10.1 GT N8010 updated to KitKat, but the pit file seems to be older. Any other info needed?
This is how I got the pit file.
Code:
sudo heimdall download-pit --output Samsung-Note-10.1-PIT.txt
I had trouble opening the result in a text editor, so I'm not sure, I got it right. You'll probably have to rename it... Let's see, if I'm allowed to upload.
Click to expand...
Click to collapse
Thanks... Any idea what the name of the original PIT file is?
(I believe it should have the .pit extension. I hope I can rename this file accordingly?)

Sorry, no.
Heimdall doesn't seem to care how the file is named. I'd hazard a guess, that it's similar for most Samsung devices.

help please. .
Hi
Any chance of sending me the PIT file. . I did the same! :'(
Thanks in advance .
.

Related

Please help.flashing Rom KD1,Odin fail.

My phone has running at stock ROM KB5. I have wipe all data (factory reset), then follow instrution of this topic http://forum.xda-developers.com/showthread.php?t=1001759. But the first time I forget uncheck Re-partition, Odin run all but Fail stop at Cache...(success 0, fail 1). I put phone into download mode to flashing again but Odin alway --> Fail, change another computer still Fail, I change flash stock KB5 rom still problem Fail, I change Odin 1.82 ---> Odin run to Cache.... and show "Odin3 Comunicator has stop working". PLEASE HELP ME.
Please help me..... I cant flash my phone
i do not know if it will help but do you have a pit file?
http://forum.xda-developers.com/showthread.php?t=1079123
I used the pit file here and it worked for me.
bateman26 said:
i do not know if it will help but do you have a pit file?
http://forum.xda-developers.com/showthread.php?t=1079123
I used the pit file here and it worked for me.
Click to expand...
Click to collapse
I have use file s1_odin_4G_Sedy.pit to flash rom, but get same problem, Odin still stuck at "cache.rfs". Fail ! I have tried flash rom via Heimdall and same result.
Maybe my phone hardware has problem ?
jackytran said:
I have use file s1_odin_4G_Sedy.pit to flash rom, but get same problem, Odin still stuck at "cache.rfs". Fail ! I have tried flash rom via Heimdall and same result.
Maybe my phone hardware has problem ?
Click to expand...
Click to collapse
Try the kc1 or kd1 without the .pit file
Sent from my Galaxy Tab running CM7
Well flahshing roms via CWM is likely not going to fix your problem, sounds like you may have changed your partition tables and will need to find a pit. I thought I read someone in the 4g forum made a working one.
Galaxy S4G Pit
Good Luck.
which kd1 rom are u trying to install. theres a kd1 rom the it was compress wrong by the programer.
Are you using Odin or heimdall what options are you selecting?
Are you able to get into download mode? (Do you see the guy with the shovel)
Make sure you have the proper usb drivers installed as well and that you are using
the factory usb cable, I have had issues with other cables.
I had the same problem, I just kept trying til it worked
Sent from my Galaxy Tab running CM7

soft bricked

hi all
I did a hard reset and then i'm getting bootloops,i tried to flash a rom from sd card with odin and i got operation aborted.please advise how can i unbrick it
flash original samsung firmware via windows ODIN
it happens to me before
Firmware finds here
http://forum.xda-developers.com/showthread.php?t=1367478
thanks,i tried that but seems i also need a pit file and for bootloader i need a tar file format,from the firmwares i downloaded i get a md5 file,tell me pls where do i find them or how do i do?
just put that md5 files to pda section in odin... then flash away...
oh... btw... use window version of odin from 1st post.
edan1979 said:
just put that md5 files to pda section in odin... then flash away...
oh... btw... use window version of odin from 1st post.
Click to expand...
Click to collapse
did that already...and still have bootloop
EDIT: WORKS! after flash did factory reset and cache wipe!
Thank you all for sugestions
i am trying to flash official version of samsung galaxy gt6200 through odin but cant get done :S....first time flashing my tab ...plzz any suggessions ?

Bricked! Help needed Pls~

I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
really sorry mate - but i think you've hard bricked the thing..
http://forum.xda-developers.com/showthread.php?t=1807002
this could be your issue..
omg...i thought it is soft bricked as i still able to access into download mode ~>.<~
Verifies that the firmware package that you downloaded is not corrupt, then enters in download mode, flash with ODIN ,if it remains in bootloop enters into recovery and performs wipe date , factory reset, should start ....
dejima said:
I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
Click to expand...
Click to collapse
download stock rom,go to download mode,and flash with odin..after that,full wipe,factory reset.try flash it with new downloaded ics md5 file again.
May i know which firmware is consider a stock rom? i tried few of them from sammobile, but all stuck at factoryfs.img >.<
dejima said:
I flashed my tab P6200 to ICS P6200XXLQ1, after that i did a full wipe :crying: then my tab cant load into OS...
i still able to access into download mode, but every time when i tried to flash other rom with odin it kept stuck at factoryfs.img :crying:
anyway to recover this?
Please help~
Click to expand...
Click to collapse
The same to me, maybe superbrick.
Try to download pit file for P6200 and reflash firmware, pit file via Odin.
If not work, send it to SS service for warranty or repartition use pit file, look for at Gnotes, Tab 7.7 box.
Sent from my GT-P6200 using Tapatalk 2
dejima said:
May i know which firmware is consider a stock rom? i tried few of them from sammobile, but all stuck at factoryfs.img >.<
Click to expand...
Click to collapse
everything from sammobile is a stock ROM.
you tried a few?? what was your criteria for choosing them?
wingie6200 said:
everything from sammobile is a stock ROM.
you tried a few?? what was your criteria for choosing them?
Click to expand...
Click to collapse
Those from my region and some randomly picked. I also tried with pit and repartition...well~ no luck too
the worst case just send to service center
dejima said:
Those from my region and some randomly picked. I also tried with pit and repartition...well~ no luck too
the worst case just send to service center
Click to expand...
Click to collapse
I would check here first
http://forum.xda-developers.com/showthread.php?t=1681047
Sent from my myTouch 4g via Tapatalk
ringnutz said:
I would check here first
http://forum.xda-developers.com/showthread.php?t=1681047
Sent from my myTouch 4g via Tapatalk
Click to expand...
Click to collapse
Probably the files on : http://forum.xda-developers.com/showthread.php?t=1681047 are not ok for p6200....... the files in that guide are for p6210 wifi only ( without 3g module like p6200... ). Or not?!?!?!
tellone said:
Probably the files on : http://forum.xda-developers.com/showthread.php?t=1681047 are not ok for p6200....... the files in that guide are for p6210 wifi only ( without 3g module like p6200... ). Or not?!?!?!
Click to expand...
Click to collapse
I would expect that if you would find the files for the 6200 version that it would do the same thing. It's already borked. Is it under warranty
Sent from my myTouch 4g via Tapatalk

[Q] N8020 semi brick,stuck startup logo,No Recovery Mode!

Hello All,
My N8020 is now semi brick after trying to flash it back to stock.It was on custom rom before but showing different errors so i decided to change the rom...First i tried to install another custom rom which was cynogenmod 10 but after intstalling this rom from cwm phone stuck at cynogenmod startup logo i waited for long time but still nothing.Then tried different versions of cynogen roms but same...After all this i decided to install a official rom so i flashed this with
N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar
but now the real problem started..Now i can boot phone in download mode but not in recovery mode at all...Then i tried to flash a cwm via odin and get "PASS" messege in odin but still no recovery mode...Tried to flash to flash clockwork recovery several time but nothing changed and then i check in download mode the custom flash counter increase every time i try to flash cwm...then i searched the stock recovery for 8020 but when i try to flash it via odin i always get "FAIL"...
Now i m out of ideas and searching for a real solution....SO can anybody please tell me what to do next to get it back to life???
Regards,
Muneeb
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
Try twrp instead cwm.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thanks for reply but can u please tell me from where i get n8020 twrp?i only able to find N8000 to N8013 but cant find for N8020....
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
You are correct, I can't find for n8020 either.
http://techerrata.com/browse/twrp2/p4noterf
Try to flash cwm again. Don't check auto reboot in odin. When finished flashing cwm, press power+volume up, when samsung or whatever appears on screen release power but keep presing volume up until cwm loads.
Let me know if you have any luck.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Thnx but its still same..did this as per your instructions but tablet still on samsung galaxy note 10.1 logo i have pressed the vol up for long time but nothing...One more thing that one more count added to custom binary download.
Still no luck...
I'm sorry to hear that. I hope you'll find a solution soon.
Sent from my Nexus 5 using Tapatalk
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
MUNEEB_AKHTAR_RAZA said:
One more thing which i forgot to mention that in download mode it is showing...
CURRENT BINARY : CUSTOM
SYSTEM BINARY : CUSTOM
this status not changing even after flashing it with official firmwares....
Click to expand...
Click to collapse
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
KDKobes said:
I would start all over from scratch to ensure the files you used were for your device.
THIS IS THE AUTO ROOT PACKAGE FOR AN N8020. UNZIP THE FILE & FLASH VIA ODIN
THIS IS CWM RECOVERY FOR N8020. FLASH VIA ODIN
THIS IS TWRP RECOVERY FOR N8000 WHICH IS WHAT YOU WOULD USE. FLASH VIA ODIN
Its possible at this point you might need to run a pit file. Nand erase as well. Read into them before EVER attempting.
Click to expand...
Click to collapse
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
MUNEEB_AKHTAR_RAZA said:
Hello,
I have tried these two already "CF-Auto_root" and "N8020-CWM-6.0.2.8-Darkman.tar.md5" but still same..But now my question is will N8000 twrp recovery work on N8020?
Pit yes it can be the solution but its bit risky isn't it?
Click to expand...
Click to collapse
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
KDKobes said:
Yes N8000 is the twrp recovery for N8020. Yes pit is risky but if you read into how to do it and follow it you will be just fine. Sometimes a device may require running NAND Erase also (meaning checking the box in odin). The biggest problem with pit file is people not knowing and just running it as if they were getting a custom ROM.
Click to expand...
Click to collapse
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
I didn't find a working pit for my n 8010. Don't worry too much about the binary counter, mine was 118 today, I reset it with triangle away. I don't have the balls to do a nand erase on mine, I'm not even sure that is required for my problem, at least mine is working.
Sent from my Nexus 5 using Tapatalk
MUNEEB_AKHTAR_RAZA said:
i tried the twrp recovery also but still same the custom binary counter increasing but no recovery mode....
Can u plz tell me a bit about pit flashing how to do that????One more thing i only able to find one pit file all over the google which is created by a user so can i use that pit file..
Thanks for ur time!
Click to expand...
Click to collapse
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
KDKobes said:
When you ran N8020XXBMA3_N8020XSABMA2_N8020XXBMA1_HOME.tar in odin did you have the re-partition box selected?
Click to expand...
Click to collapse
Never ticked this option yet...So you suggest me to do so?
MUNEEB_AKHTAR_RAZA said:
Never ticked this option yet...So you suggest me to do so?
Click to expand...
Click to collapse
Yes, dont check auto boot though leave that unchecked and if it passes reboot to recovery and do a data wipe then reboot. If you run into error add your pit file to the pit window along with your stock tar.md5 file and run it just as I mentioned before with repartition selected
Make sure the pit file you use is for your device model/storage size
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
pilo_kulet said:
hi sir need assistance. Can you please re-upload links im having the same problem.
N8020 suddenly rebooted and stuck on boot loop.
Thank you in advance.
Click to expand...
Click to collapse
Last post 2014 poster no longer active on the forum .
TWRP and CWM see development threads .
Oddly enough a notification was sent to my email. That's correct though I'm no longer active in this forum.
Here is all I have left on the Galaxy Note 10.1, anything else you need you will have to find.
https://drive.google.com/open?id=0B-BP_JVn6T1Mb1o4UXVUYUpnc0E
Thanks for that .
I PM the mods is probably why you got the message .
Sadly/ logically this forum is nearly dead .

PLEASE HELP, cant ODIN back to stock

Everything was fine. tried the minuit (or however you spell it) mod. Ended up in a boot loop. i can get into download mode fine. Downloaded the stock firmware to odin back and start over, but when i try, it checks the MD5 just fine. starts the "setupconnection" then i get a fail "can't open the serial(COM) port.
Am i doing something wrong here? Any help at all would be greatly appreciated!
What firmware version were you on before bootloop and what version are you trying to ODIN?
jlaholton said:
Everything was fine. tried the minuit (or however you spell it) mod. Ended up in a boot loop. i can get into download mode fine. Downloaded the stock firmware to odin back and start over, but when i try, it checks the MD5 just fine. starts the "setupconnection" then i get a fail "can't open the serial(COM) port.
Am i doing something wrong here? Any help at all would be greatly appreciated!
Click to expand...
Click to collapse
You need odin 3.10.6 and make sure you downloaded the latest stock firmware .tar. when flashing, don't move the phone, cord or laptop (if thats what you have).
Sent from my SM-G925P using XDA Free mobile app
Me too. The odin stuck at <ID:0/010> NAND Write Start!!
My stock ROM is OE2 and want to flash OF7, the original stock ROM has been rooted and TWRP installed.
lwang9 said:
Me too. The odin stuck at <ID:0/010> NAND Write Start!!
My stock ROM is OE2 and want to flash OF7, the original stock ROM has been rooted and TWRP installed.
Click to expand...
Click to collapse
Wipe system and try again
Soooperstar said:
Wipe system and try again
Click to expand...
Click to collapse
TWRP has been replaced to the original recovery firmware. It couldn't read the internal storage.
lwang9 said:
TWRP has been replaced to the original recovery firmware. It couldn't read the internal storage.
Click to expand...
Click to collapse
Are you able to factory reset from stock recovery?
Soooperstar said:
Are you able to factory reset from stock recovery?
Click to expand...
Click to collapse
I failed to use ODIN flash the entire stock ROM which is over 3gb tar.md5 file. Could I download the stock recovery only and flash by ODIN? Also, I am not sure if PIT file helps. I couldn't find PIT file download yet.
lwang9 said:
I failed to use ODIN flash the entire stock ROM which is over 3gb tar.md5 file. Could I download the stock recovery only and flash by ODIN? Also, I am not sure if PIT file helps. I couldn't find PIT file download yet.
Click to expand...
Click to collapse
Not completely understanding you. Are you saying Odin is failing when trying to Odin latest firmware?
Yes, I failed to flash the latest firmware by ODIN 3.10. I read another post mentioned PIT file to flash to avoid this issue. However, I don't know where I could download the PIT file for this phone.
lwang9 said:
Yes, I failed to flash the latest firmware by ODIN 3.10. I read another post mentioned PIT file to flash to avoid this issue. However, I don't know where I could download the PIT file for this phone.
Click to expand...
Click to collapse
Are you on the latest Odin version and are you using the correct firmware?
Yes, I did.
lwang9 said:
Yes, I did.
Click to expand...
Click to collapse
What Odin version are you using? What phone do you have, and what firmware version are you trying to use? What firmware are you on now?
Soooperstar said:
Are you on the latest Odin version and are you using the correct firmware?
Click to expand...
Click to collapse
My Odin version is 3.10 and the firmware I downloaded from Sammobile.
sammobile.com/firmwares/download/50549/G925PVPU2BOF7_G925PSPT2BOF7_SPR/
lwang9 said:
My Odin version is 3.10 and the firmware I downloaded from Sammobile.
sammobile.com/firmwares/download/50549/G925PVPU2BOF7_G925PSPT2BOF7_SPR/
Click to expand...
Click to collapse
And you have the sprint s6 edge? You didn't answer all my questions
used one of these when i had recent problem.
edit: try to use the same firmware your currently on (what i did) and the thing that worked for me was using an older sammy usb cable. Beleive it or not the original one kept failing on me. i had a thicker black one that was from my s4 maybe or note 2 i think and used that one and boom went thru. good luck
los82 said:
edit: try to use the same firmware your currently on (what i did) and the thing that worked for me was using an older sammy usb cable. Beleive it or not the original one kept failing on me. i had a thicker black one that was from my s4 maybe or note 2 i think and used that one and boom went thru. good luck
Click to expand...
Click to collapse
Thanks!!! It worked. Just grab another USB cable. The original one kept failing on me either. The issue has been solved. Thanks again.

Categories

Resources