Related
Hi all,
I want to install Andromadus ROM Build 13 on my DS and currently have stock 2.3.3 installed.
As this will be my first custom ROM and also I couldn't find any how-to to install Andromadus on an HTC Desire S so, I am posting it here.
I have 4EXT touch recovery, S-OFF'ed and the HBoot is downgraded to 0.98.2000 (PG8810000).
So, where do I start? I am making backups using 4EXT recovery and downloading "flinnycm101_saga_13.zip" & "gapps-jb-20121212-signed.zip" from http://andromadus.flinny.org/?q=node/24
but as posted on the same page..I have a doubt of whether to flash the MDDI kernel too? Is that required to be flashed on an HTC Desire S ?
Any full length how-to's will be appreciated.
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
oddoneout said:
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
Click to expand...
Click to collapse
So, Can I use 4ext's recovery app to boot into recovery mode >> then format System
>> Format Data
>>Format Cache
>> then Format Boot
>> Wipe Data/Factory reset (1st option in wipe/format menu)
>> Wipe Dalvik Cache
>> n then finally install zip (ROM) from sd card and flash the rom..
>> then flash then gapps zip?
Also, isn't 4ext's backup option backs up my apps, app's data and the contacts too? :| um..what about the draft message(s) ? will that be backed up too using 4ext recov.?
But I guess I won't be able to restore them on an individual basis when I am done flashing the new ROM? As 4ext's created backup can only restore the full backed-up data which includes the old ROM itself!
Update: backing up apps+data using Titanium backup pro..so that will backup my contacts+ sms+draft sms too..right?
Any advice?
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
sky770 said:
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
acultr said:
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
Click to expand...
Click to collapse
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
sky770 said:
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
Click to expand...
Click to collapse
read the previous post
acultr said:
read the previous post
Click to expand...
Click to collapse
Is there a way I can determine which screen do I have..now that I have already flashed my device and cannot access es explorer and stuff?
I do have access to 4ext recovery and adb console :|
Is it possible to navigate to / or /sys using adb console?
Also, suppose even if I do have the MDDI type of screen and I flash the MDDI kernel img but will that mean that I won't be able to adjust screen brightness and stuff?
Just flashed the MDDI kernel..waiting for reboot proc to complete...
I hope this doesn't fail this time.. :|
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
now its been ~2-3mins still stuck on the HTC screen :| (even after flashing the MDDI kernel)
Do I have to re-clear/wipe the cache..after flashing the ROM? or re-flash the ROM itself? (as I have read in some posts that it usually works after clearing the dalvik/cache and/or reflashing the same ROM again)
Can you provide me with the command I can use on adb console to find out the brand of my screen's manufacturer ?
Update:
I had flashed the ROM and then flashed the google apps pkg and then after a reboot now again flashed the MDDI kernel.
Is it the correct sequence to install the MDDI kernel?
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
I have shifted my issue to this thread: http://forum.xda-developers.com/showthread.php?p=37933379
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downloads. Reboot into recovery using adb, try not to pull the battery unless you really have to then if you do wait a couple of seconds before replacing it
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downlosd
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
go to recovery restore your prev. ROM and check the panel
Step 1. Find out which screen panel your device has:
1) Download and install Android Terminal Emulator from Google Play Market
2) Open the application and type in these commands:
(WARNING: to use these commands - you must be rooted with either Superuser or SuperSU AND have BusyBox installed on your phone)
su
dmesg|grep -i panel
If the app shows you any text with word "sony" in it - then your device has a screen panel made by Sony (obviously). If that's the case - you can just close this thread at once and don't worry that your device might freeze at "HTC Quietly Brilliant" screen after flashing a ROM. Otherwise, proceed forward.
OR
1) Open up a file manager that has an ability of browsing any partition above the default SD-card directory and can access the system partition
You can use either ES File Manager or Root Explorer
2) Navigate to /sys/android_display
If there is a file called "sony ****** wvga" - then you have a Sony panel. Otherwise - you device has a panel by Hitachi.
Step 2. Download a MDDI kernel developed by Andromadus:
For Android 4.0.x & 4.1.x, use this link --> http://goo.im/devs/Super/andromadus/...kernel_82n.zip
For Android 4.2.x, use this link --> http://andromadus.flinny.org/sites/a...212.zip&nid=16
Step 3. Flash the MDDI kernel:
If you are S-OFF --> just flash the .zip file with the kernel after flashing the ROM and GAPPS package through "install zip from sdcard"
If you are S-ON --> use the following instruction:
Thanks for Fatal1ty 18 RUS:good:
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
Click to expand...
Click to collapse
Stop opening fresh threads, people tend to ignore you More if you constantly open threads. I had a couple of panicky moments when i first did mine. Just take a deep breath and start again
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
sky770 said:
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
Click to expand...
Click to collapse
command:adb devices
acultr said:
command:adb devices
Click to expand...
Click to collapse
prints:
List of Devices attached
it is showing nothing :'(
cm10 for sky a830 .......everything is working fine .....but if you find any bug notify me
Rom download address ::::::::-------
https://www.dropbox.com/sh/b5xdg3dgrwq7thh/jIrUxFS8Cc
for k and s version patches are in this link
hassantalal11 said:
cm10 for sky a830 .......everything is working fine .....but if you find any bug notify me
Rom download address ::::::::-------
https://www.dropbox.com/sh/b5xdg3dgrwq7thh/jIrUxFS8Cc
for k and s version patches are in this link
Click to expand...
Click to collapse
This just Hour Rom Final really?
did you flash it?
yes i have flashed it.and this rom is working like charm
uploading new rom.......wait for 1 hour
:fingers-crossed:
I know noobish question, but ive been trying for 2+ hours now without any luck..so can you tell me how to install this? these are the steps I currently follow
reboot phone to fastboot (phone is already rooted)
use fastboot to run CWM (6.0.3.1)
select wipe cache
select factory reset/wipe userdata
select mount and storage-> format sdcard/system partition
select advanced->wipe dalvic cache
select instal zip from sd card-> install from sd card-> select the downloaded zip file
zip file installs...
select go back
select reboot system now
and now when the phone restarts, I see a black screen that says
VEGA
the brightest star in the SKY
Pantech
and it just stays stuck there....
Note that I previously installed official 4.1.2 on my device....
thanks in advance.
death_relic0 said:
I know noobish question, but ive been trying for 2+ hours now without any luck..so can you tell me how to install this? these are the steps I currently follow
reboot phone to fastboot (phone is already rooted)
use fastboot to run CWM (6.0.3.1)
select wipe cache
select factory reset/wipe userdata
select mount and storage-> format sdcard/system partition
select advanced->wipe dalvic cache
select instal zip from sd card-> install from sd card-> select the downloaded zip file
zip file installs...
select go back
select reboot system now
and now when the phone restarts, I see a black screen that says
VEGA
the brightest star in the SKY
Pantech
and it just stays stuck there....
Note that I previously installed official 4.1.2 on my device....
thanks in advance.
Click to expand...
Click to collapse
you will need to install official icecream sandwich if want to install this rom...
link isn't working?
Zeuik said:
This just Hour Rom Final really?
did you flash it?
Click to expand...
Click to collapse
Please update link with latest update
I want rom for the sky vega a860 and the procedure also please tell me ????
Hello guys, I'm new to this and I have absolutely no knowledge about these things. I have a (Un-Rooted) Qmobile A500 and I want to flash it and get a custom ROM. I have made backup (Simple one with copy and pasting all files in storage) Can someone help me and post step by step on what to do before I can install the custom ROM?
(I'm thinking of flashing to this: http://forum.xda-developers.com/showthread.php?t=2479608
Thank you in advance.
([{ P.S if this thread belongs anywhere else, please tell me. Thanks! }])
Anyone? Please?
Yarizmass said:
Hello guys, I'm new to this and I have absolutely no knowledge about these things. I have a (Un-Rooted) Qmobile A500 and I want to flash it and get a custom ROM. I have made backup (Simple one with copy and pasting all files in storage) Can someone help me and post step by step on what to do before I can install the custom ROM?
(I'm thinking of flashing to this: http://forum.xda-developers.com/showthread.php?t=2479608
Thank you in advance.
([{ P.S if this thread belongs anywhere else, please tell me. Thanks! }])
Click to expand...
Click to collapse
First u need to root then to install custom recovery...
u can find guide for root and recovery here
http://forum.xda-developers.com/showthread.php?t=2475234
After you are rooted and installed custom recovery (use non touch recovery) goto recovery mode and use it using up and down Volume keys and power button then goto backup and restore and then backup after backup is complete copy rom u want to flash to sd card then goto recovery and Format data factory reset...After that goto install zip from sd card..Choose zip from sd card and choose the rom file after that press yes....When rom installed press reboot and you are done...first reboot may take some time about 5-10 min...
hamsam said:
First u need to root then to install custom recovery...
u can find guide for root and recovery here
http://forum.xda-developers.com/showthread.php?t=2475234
After you are rooted and installed custom recovery (use non touch recovery) goto recovery mode and use it using up and down Volume keys and power button then goto backup and restore and then backup after backup is complete copy rom u want to flash to sd card then goto recovery and Format data factory reset...After that goto install zip from sd card..Choose zip from sd card and choose the rom file after that press yes....When rom installed press reboot and you are done...first reboot may take some time about 5-10 min...
Click to expand...
Click to collapse
Thank you very much! I'm doing this, I'll post after I do this any problems! THANKS!
hamsam said:
First u need to root then to install custom recovery...
u can find guide for root and recovery here
http://forum.xda-developers.com/showthread.php?t=2475234
After you are rooted and installed custom recovery (use non touch recovery) goto recovery mode and use it using up and down Volume keys and power button then goto backup and restore and then backup after backup is complete copy rom u want to flash to sd card then goto recovery and Format data factory reset...After that goto install zip from sd card..Choose zip from sd card and choose the rom file after that press yes....When rom installed press reboot and you are done...first reboot may take some time about 5-10 min...
Click to expand...
Click to collapse
Super SU is greyed out.. I did ROOT on bottom left.
Yarizmass said:
Super SU is greyed out.. I did ROOT on bottom left.
Click to expand...
Click to collapse
make sure drivers are installed and usb debbugging is enabled on your phone and phone is connected to pc.
First load scatter of Stock Rom
Click on format and full format
Connect your phone without battery
After format complete remove your cell from System
Now click on download and connect cell Without battery
After process complete, remove cable and boot to Stock Rom and restore IMEI.
Note:
Make sure you have installed proper drivers
Make sure that you have backup of IMEI using MTK Droid tool or any other tool you know
For all Tools and driver visit FB pinned post
Requirement:
Sp Tool
Stock Rom
System with Windows
Drivers
Credit:
Manish Singh
Jalauddin
Me
C2+ Group
Done nyc work by posting the guide
Sent from my Multi By Java using xda app-developers app
tutorial
Hii I am noob. Can anyone tell me how to get my phone back as I bye it. I am using xperia fusion Rom and also did partition.
nyce work...
nikhilsk said:
Hii I am noob. Can anyone tell me how to get my phone back as I bye it. I am using xperia fusion Rom and also did partition.
Click to expand...
Click to collapse
Download Prerooted Stock ROM from this link and flash the same using CWM
http://d-h.st/mZO
Download zip file
2. Put into external/internal sd card
3. Go to Recovery
4. Wipe data/factory reset/clear dalvic,format cache...
5. Flash the rom zip file
6. Flash the downloaded file
8. Reboot your device
***********************
Hit Thanks if helped
Good work thank!!
Sent from my A110Q using XDA Premium 4 mobile app
Partition & Flashing without workin Vol. dwn key !
Bro , Can you help me ??
m Using Stock rom v2 !
Using The same phone ( Micromax A110Q )
i need to install a custom rom ! Named as -->> SSR KITAKT 4.4.2 For micromax A110Q .
But my Vol. Down key is not working !
Can uh help me ??
to install that Rom Through SP TOOL ?? pls ! i badly need to use that SSR rom !
But my vol down key is not working What to do bro ?
pls help me
Q&A for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
not working..after imstalling it reboot to recovery
not working..after imstalling it reboot to recovery..help
Follow the instructions carefully
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
1) Download the zip file from the download link provided below...
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
5) Go to recovery mod and firstly take the nandroid backup and reboot...
6) Again go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone ....now fly with sparrow
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
Do not flash the addon zip just after installing ROM .... A reboot is necessory after installing ROM and after a reboot then flash addon zip.. Also don't do any factory reset after installing both rom and addon zip.
And after this if again any problem occur then do inform me...
a complaint
My handset has been appearing white and then booting often, but it is not booting properly and it becoming white and then again booting as ninja..I don't know what to do...please help me Bro's....I can't use my headset ninja a89..;reply me soon... XDAXda
Finally sorry for my English...
I think you don't followed the instructions to install flying sparrow carefully... Please read the instructions first and strictly follow them.. And also use the cautions..
Also report me if it work
USB Mass storage not working
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
solution
Karthik Bala said:
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
Click to expand...
Click to collapse
Actually flying sparrow is completely bugless but if you are facing problem of usb ,do the following things for solution. Firstly install the rom zip only don't flash the addon zip and reboot .Then try to connect your phone to your computer. Then usb will work.. And after this try ,go to recovery mode and flash the addon zip.. And reboot. Don't do factory reset.. Now usb will work.. If any other problem occurs report me
Not Working in my A89
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
solution
vsmv said:
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
Click to expand...
Click to collapse
Installation is abroted because you are installing the wrong zip file...
You need to firstly extract the downloaded zip file and you will find the ROM zip inside it
Kindly follow the steps...
1) Download the zip file
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
6) Go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone
Need Help
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Abhay S said:
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Click to expand...
Click to collapse
Everything is ok but between steps 1 and 2 you forget to extract zip file... After extraction you will find rom zip and addon zip.. You have to put these two zip files in your sdcard...
install fly sparrow in micromax a89 ninja
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Installation steps updated
Steps for installing rom properly are updated now and explained properly for cwm and twrp users individually in the discussion page.....:d
regarding xblast tools
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Solution
Pbm12345 said:
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Click to expand...
Click to collapse
For changing the background wallpapers of apps you need to decompile them.. There are many tutorials available on xda ,kindly follow them..
Quick settings will not work work on flying sparrow as quick setting will only work for jb.. You can try to install them but i know that this feature will not work for an ics based rom.. Proceed to post no.2 in the discussion thread of flying sparrow for installing xposed framework.. Also i have provided the list features of xblast tools which are tested and work perfectly on flying sparrow.. If follow the procedure in post 2 correctly you will successfully work with exthemer... You need to select exthemer in the module list of xposed installer.. And reboot.. I hope this will help you and give answers to you your questions... Also participate in poll in flying sparrow thread...
Error
Hey,there is problm after reboot......
it does not go further after boot animation..
plz help me out....
How to remove transparency in each view
Hi Preet,
I have installed your ROM, on MMX A89 just few minutes before, and it looks nice.
I have some questions and main is I DO NOT want Transparent background in any case.
How do I achieve that in your ROM? I do not like transparent background.
Please help me for this.
Note: I will wait for 1 day otherwise I will restore my old backup (ICS 4.0.4 company look). And what you had said about battery saver? What bug it has for battery?
Thanks in advance.