Related
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
You forgott to flash the Kernel Use Fastboot for this.
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Open the Zip and Copy the boot.img to your pc
3)Put the ROM to sdcard
4)Boot your phone into fastboot (In Phone power off state press power + volume down)
5)connect to the pc via usb
6)use your commandline on pc + fastboot.exe and do the following command "fastboot flash boot <PathToTheBoot.ImgFromStep2>"
7)use your commandline on pc + fastboot.exe and do the following command "fastboot erase cache"
8)short press power on the phone to get in hboot
9)use volume down and then power to select "Recovery"
10)wipe data/factory reset
11)Flash rom
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
the_Storm said:
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
Click to expand...
Click to collapse
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
the_Storm said:
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
Click to expand...
Click to collapse
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thank you bro I will test it tonight...
If you have time would you look at this please
http://forum.xda-developers.com/showthread.php?t=1781182
Thank you ..
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thanks very much for all of this it will help me a lot when I get round to flashing!
In reference to this, when I'm coming to update to the latest version of this rom, what's the procedure to follow?
Hi,
I'm trying to flash Jellybean 4.1.1 build #27 but it fails no matter what. I have followed the procedure, flashed the rom, erased cache, wiped data/factory reset, rebooted on recovery.
Here's what I get:
-- Install /sdcard/tg_endeavoru-ota-27.zip ...
Finding update package ...
Opening update package ...
Installing update ...
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru"
E:Error in /sdcard/tg_endeavoru-ota-27.zip
(Status 7)
* Verifying filesystem...
* Verifying partition sizes...
Error Flashing zip '/sdcard/tg_endeavoru-ota-27.zip'
Failed
Any idea what I could be doing wrong?
Thank you very much in advance for your help.
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
I've got JB running on my phone but when I try to boot into recovery to install the apps it won't work. I get the red exclamation mark. I am coming from twrp2.2.0 I followed these instructions
Download the latest CM10 .zip file from here.
Download JB Google Apps from here.
Reboot into CWM or TWRP recovery.
Factory Data reset. (MUST DO THIS!)
Flash CM10 .zip file.
Reboot.
Reboot into recovery.
Flash JB Google apps.
Enjoy!
Any help would be great
jb 4.1.1 how screenshot??
hello All, this is my first quest in this forum. i'have flashed jb 4.1.1 in my device (one x) ad is all ok (wifi go in sleeping mode too fast but when it stand up go well) i need to make a lot of screenshot and i dont know how. Pls help
PS: i think this forum is very usefull for modding android, great work!!!)
Imerio
HavE fUn
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
I love you and thank you. Simple, easy, quick instructions
Hi All,
Is there any guide on installing a brand new OS for Nexus S (GT-I9020T) ? Somehow my OS crushed and during boot up it stucks on the Google Screen.
Thnx !
Kees
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
manthos1978 said:
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
Click to expand...
Click to collapse
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
karabaci said:
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
Click to expand...
Click to collapse
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
ej8989 said:
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
Click to expand...
Click to collapse
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
karabaci said:
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
Click to expand...
Click to collapse
You need to update your custom recovery.
Download CWM 6.0.1.0 here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-crespo.img
Put it anywhere in your pc, or even on your sdcard.
Then go to command prompt and type fastboot flash recovery <put EXACT img file location and name here>
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
karabaci said:
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
Click to expand...
Click to collapse
Because you have a custom recovery, no.
That's the advantage of using a custom recovery though, you can just download and flash any newly updated ROM/s instead of waiting for the official google update.
Hi all,
I want to install Andromadus ROM Build 13 on my DS and currently have stock 2.3.3 installed.
As this will be my first custom ROM and also I couldn't find any how-to to install Andromadus on an HTC Desire S so, I am posting it here.
I have 4EXT touch recovery, S-OFF'ed and the HBoot is downgraded to 0.98.2000 (PG8810000).
So, where do I start? I am making backups using 4EXT recovery and downloading "flinnycm101_saga_13.zip" & "gapps-jb-20121212-signed.zip" from http://andromadus.flinny.org/?q=node/24
but as posted on the same page..I have a doubt of whether to flash the MDDI kernel too? Is that required to be flashed on an HTC Desire S ?
Any full length how-to's will be appreciated.
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
oddoneout said:
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
Click to expand...
Click to collapse
So, Can I use 4ext's recovery app to boot into recovery mode >> then format System
>> Format Data
>>Format Cache
>> then Format Boot
>> Wipe Data/Factory reset (1st option in wipe/format menu)
>> Wipe Dalvik Cache
>> n then finally install zip (ROM) from sd card and flash the rom..
>> then flash then gapps zip?
Also, isn't 4ext's backup option backs up my apps, app's data and the contacts too? :| um..what about the draft message(s) ? will that be backed up too using 4ext recov.?
But I guess I won't be able to restore them on an individual basis when I am done flashing the new ROM? As 4ext's created backup can only restore the full backed-up data which includes the old ROM itself!
Update: backing up apps+data using Titanium backup pro..so that will backup my contacts+ sms+draft sms too..right?
Any advice?
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
sky770 said:
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
acultr said:
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
Click to expand...
Click to collapse
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
sky770 said:
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
Click to expand...
Click to collapse
read the previous post
acultr said:
read the previous post
Click to expand...
Click to collapse
Is there a way I can determine which screen do I have..now that I have already flashed my device and cannot access es explorer and stuff?
I do have access to 4ext recovery and adb console :|
Is it possible to navigate to / or /sys using adb console?
Also, suppose even if I do have the MDDI type of screen and I flash the MDDI kernel img but will that mean that I won't be able to adjust screen brightness and stuff?
Just flashed the MDDI kernel..waiting for reboot proc to complete...
I hope this doesn't fail this time.. :|
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
now its been ~2-3mins still stuck on the HTC screen :| (even after flashing the MDDI kernel)
Do I have to re-clear/wipe the cache..after flashing the ROM? or re-flash the ROM itself? (as I have read in some posts that it usually works after clearing the dalvik/cache and/or reflashing the same ROM again)
Can you provide me with the command I can use on adb console to find out the brand of my screen's manufacturer ?
Update:
I had flashed the ROM and then flashed the google apps pkg and then after a reboot now again flashed the MDDI kernel.
Is it the correct sequence to install the MDDI kernel?
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
I have shifted my issue to this thread: http://forum.xda-developers.com/showthread.php?p=37933379
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downloads. Reboot into recovery using adb, try not to pull the battery unless you really have to then if you do wait a couple of seconds before replacing it
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downlosd
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
go to recovery restore your prev. ROM and check the panel
Step 1. Find out which screen panel your device has:
1) Download and install Android Terminal Emulator from Google Play Market
2) Open the application and type in these commands:
(WARNING: to use these commands - you must be rooted with either Superuser or SuperSU AND have BusyBox installed on your phone)
su
dmesg|grep -i panel
If the app shows you any text with word "sony" in it - then your device has a screen panel made by Sony (obviously). If that's the case - you can just close this thread at once and don't worry that your device might freeze at "HTC Quietly Brilliant" screen after flashing a ROM. Otherwise, proceed forward.
OR
1) Open up a file manager that has an ability of browsing any partition above the default SD-card directory and can access the system partition
You can use either ES File Manager or Root Explorer
2) Navigate to /sys/android_display
If there is a file called "sony ****** wvga" - then you have a Sony panel. Otherwise - you device has a panel by Hitachi.
Step 2. Download a MDDI kernel developed by Andromadus:
For Android 4.0.x & 4.1.x, use this link --> http://goo.im/devs/Super/andromadus/...kernel_82n.zip
For Android 4.2.x, use this link --> http://andromadus.flinny.org/sites/a...212.zip&nid=16
Step 3. Flash the MDDI kernel:
If you are S-OFF --> just flash the .zip file with the kernel after flashing the ROM and GAPPS package through "install zip from sdcard"
If you are S-ON --> use the following instruction:
Thanks for Fatal1ty 18 RUS:good:
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
Click to expand...
Click to collapse
Stop opening fresh threads, people tend to ignore you More if you constantly open threads. I had a couple of panicky moments when i first did mine. Just take a deep breath and start again
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
sky770 said:
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
Click to expand...
Click to collapse
command:adb devices
acultr said:
command:adb devices
Click to expand...
Click to collapse
prints:
List of Devices attached
it is showing nothing :'(
I updated the CWM to 6.x and tried to install KitKat 4.4.4 on my P500 and now, it stuck at bootloaded. Tried different ROMs but still stuck at bootloader.
I am able to open CWM recovery, install zip even can mount USB or /system and run adb shell. Able to connect it in emergency mode (PC detects it), but KDZ does not recognize the phone.
I tried the LG support tool, that told me that the software is already up-to-date. When I try to update recovery, it stuck at 11% and says there is some issue in PC communication.
Can this be an issue of baseband? I am not sure what to try next.
***Have removed the sd-card also to see if that helps.
*** also tried on different machines with xp, win 7, win 8.
Can anyone help?
shubhz1987 said:
I updated the CWM to 6.x and tried to install KitKat 4.4.4 on my P500 and now, it stuck at bootloaded. Tried different ROMs but still stuck at bootloader.
I am able to open CWM recovery, install zip even can mount USB or /system and run adb shell. Able to connect it in emergency mode (PC detects it), but KDZ does not recognize the phone.
I tried the LG support tool, that told me that the software is already up-to-date. When I try to update recovery, it stuck at 11% and says there is some issue in PC communication.
Can this be an issue of baseband? I am not sure what to try next.
***Have removed the sd-card also to see if that helps.
*** also tried on different machines with xp, win 7, win 8.
Can anyone help?
Click to expand...
Click to collapse
If you can boot to recovery then do the following:
1) Wipe dalvik-cache
2) Wipe cache
3) Format /system
4) Format /userdata or /data
5) Reinstall ROM
6) Reinstall GApps
7) Reboot
When upgrading or changing between major versions, ie; JellyBean to KitKat, it's highly recommended to format your system and userdata partitions.
Done This
shinobisoft said:
If you can boot to recovery then do the following:
1) Wipe dalvik-cache
2) Wipe cache
3) Format /system
4) Format /userdata or /data
5) Reinstall ROM
6) Reinstall GApps
7) Reboot
When upgrading or changing between major versions, ie; JellyBean to KitKat, it's highly recommended to format your system and userdata partitions.
Click to expand...
Click to collapse
Thanks shinobisoft, but I have done these in the same order.
help
shubhz1987 said:
Thanks shinobisoft, but I have done these in the same order.
Click to expand...
Click to collapse
Hello Guys...
Any help....
shubhz1987 said:
Hello Guys...
Any help....
Click to expand...
Click to collapse
you didn't say wich rom/thread etc, however
could you try this:
take this cwm the january's
take this rom the 7.1 version.
enter in recovery mode
flash the above cwm
flash the rom :fingers-crossed:
after that if you want to flash a kitkat, if it's an OS2SD or not use twrp 2.7.0.1 multi (bigsupersquid's & HardLight's twrp for p500)
this version have tls enabled
Now stuck at LG boot logo infinite loop
xdema said:
you didn't say wich rom/thread etc, however
could you try this:
take this cwm the january's
take this rom the 7.1 version.
enter in recovery mode
flash the above cwm
flash the rom :fingers-crossed:
after that if you want to flash a kitkat, if it's an OS2SD or not use twrp 2.7.0.1 multi (bigsupersquid's & HardLight's twrp for p500)
this version have tls enabled
Click to expand...
Click to collapse
I flashed both of these zips and now I am stuck at LG boot logo infinite loop. CWM is updated by the above zip.
shubhz1987 said:
I flashed both of these zips and now I am stuck at LG boot logo infinite loop. CWM is updated by the above zip.
Click to expand...
Click to collapse
Did you make the format /system /androidsecure /data etc..?
change the SD card, re-download the rom 7.1 & the twrp 2.7.0 multi, and retry (corrupted data/download problem?)
else go back to older cwm v5 and try older ics based rom.
i don't want to suggest to you to use LGMDP or KDZ because with that you can really break the phone. take that as last chances
i've a p500 for test, i've seen a lot of "black after LG logo", but everytime when i had possibility to enter the recovery, a new flash (recovery, rom or both) solved problems
To wipe clean 100% and install a new rom
Select “wipe data/factory reset
Select “yes”
Go to “mounts and storage”
Select “format /boot”
Select “yes”
Select “format /system”
Select “yes”
Back out of that menu to the main one again and select “advanced”
Select “Wipe Dalvik Cache”
Select “yes”
xdema said:
Did you make the format /system /androidsecure /data etc..?
change the SD card, re-download the rom 7.1 & the twrp 2.7.0 multi, and retry (corrupted data/download problem?)
else go back to older cwm v5 and try older ics based rom.
i don't want to suggest to you to use LGMDP or KDZ because with that you can really break the phone. take that as last chances
i've a p500 for test, i've seen a lot of "black after LG logo", but everytime when i had possibility to enter the recovery, a new flash (recovery, rom or both) solved problems
To wipe clean 100% and install a new rom
Select “wipe data/factory reset
Select “yes”
Go to “mounts and storage”
Select “format /boot”
Select “yes”
Select “format /system”
Select “yes”
Back out of that menu to the main one again and select “advanced”
Select “Wipe Dalvik Cache”
Select “yes”
Click to expand...
Click to collapse
It's also good to check the Md5 sums of the recovery and rom.zip, if Md5 sums don't match, you will have a corrupt download.
Q&A for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
not working..after imstalling it reboot to recovery
not working..after imstalling it reboot to recovery..help
Follow the instructions carefully
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
1) Download the zip file from the download link provided below...
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
5) Go to recovery mod and firstly take the nandroid backup and reboot...
6) Again go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone ....now fly with sparrow
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
Do not flash the addon zip just after installing ROM .... A reboot is necessory after installing ROM and after a reboot then flash addon zip.. Also don't do any factory reset after installing both rom and addon zip.
And after this if again any problem occur then do inform me...
a complaint
My handset has been appearing white and then booting often, but it is not booting properly and it becoming white and then again booting as ninja..I don't know what to do...please help me Bro's....I can't use my headset ninja a89..;reply me soon... XDAXda
Finally sorry for my English...
I think you don't followed the instructions to install flying sparrow carefully... Please read the instructions first and strictly follow them.. And also use the cautions..
Also report me if it work
USB Mass storage not working
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
solution
Karthik Bala said:
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
Click to expand...
Click to collapse
Actually flying sparrow is completely bugless but if you are facing problem of usb ,do the following things for solution. Firstly install the rom zip only don't flash the addon zip and reboot .Then try to connect your phone to your computer. Then usb will work.. And after this try ,go to recovery mode and flash the addon zip.. And reboot. Don't do factory reset.. Now usb will work.. If any other problem occurs report me
Not Working in my A89
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
solution
vsmv said:
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
Click to expand...
Click to collapse
Installation is abroted because you are installing the wrong zip file...
You need to firstly extract the downloaded zip file and you will find the ROM zip inside it
Kindly follow the steps...
1) Download the zip file
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
6) Go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone
Need Help
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Abhay S said:
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Click to expand...
Click to collapse
Everything is ok but between steps 1 and 2 you forget to extract zip file... After extraction you will find rom zip and addon zip.. You have to put these two zip files in your sdcard...
install fly sparrow in micromax a89 ninja
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Installation steps updated
Steps for installing rom properly are updated now and explained properly for cwm and twrp users individually in the discussion page.....:d
regarding xblast tools
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Solution
Pbm12345 said:
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Click to expand...
Click to collapse
For changing the background wallpapers of apps you need to decompile them.. There are many tutorials available on xda ,kindly follow them..
Quick settings will not work work on flying sparrow as quick setting will only work for jb.. You can try to install them but i know that this feature will not work for an ics based rom.. Proceed to post no.2 in the discussion thread of flying sparrow for installing xposed framework.. Also i have provided the list features of xblast tools which are tested and work perfectly on flying sparrow.. If follow the procedure in post 2 correctly you will successfully work with exthemer... You need to select exthemer in the module list of xposed installer.. And reboot.. I hope this will help you and give answers to you your questions... Also participate in poll in flying sparrow thread...
Error
Hey,there is problm after reboot......
it does not go further after boot animation..
plz help me out....
How to remove transparency in each view
Hi Preet,
I have installed your ROM, on MMX A89 just few minutes before, and it looks nice.
I have some questions and main is I DO NOT want Transparent background in any case.
How do I achieve that in your ROM? I do not like transparent background.
Please help me for this.
Note: I will wait for 1 day otherwise I will restore my old backup (ICS 4.0.4 company look). And what you had said about battery saver? What bug it has for battery?
Thanks in advance.