Related
Hi all,
I want to install Andromadus ROM Build 13 on my DS and currently have stock 2.3.3 installed.
As this will be my first custom ROM and also I couldn't find any how-to to install Andromadus on an HTC Desire S so, I am posting it here.
I have 4EXT touch recovery, S-OFF'ed and the HBoot is downgraded to 0.98.2000 (PG8810000).
So, where do I start? I am making backups using 4EXT recovery and downloading "flinnycm101_saga_13.zip" & "gapps-jb-20121212-signed.zip" from http://andromadus.flinny.org/?q=node/24
but as posted on the same page..I have a doubt of whether to flash the MDDI kernel too? Is that required to be flashed on an HTC Desire S ?
Any full length how-to's will be appreciated.
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
oddoneout said:
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
Click to expand...
Click to collapse
So, Can I use 4ext's recovery app to boot into recovery mode >> then format System
>> Format Data
>>Format Cache
>> then Format Boot
>> Wipe Data/Factory reset (1st option in wipe/format menu)
>> Wipe Dalvik Cache
>> n then finally install zip (ROM) from sd card and flash the rom..
>> then flash then gapps zip?
Also, isn't 4ext's backup option backs up my apps, app's data and the contacts too? :| um..what about the draft message(s) ? will that be backed up too using 4ext recov.?
But I guess I won't be able to restore them on an individual basis when I am done flashing the new ROM? As 4ext's created backup can only restore the full backed-up data which includes the old ROM itself!
Update: backing up apps+data using Titanium backup pro..so that will backup my contacts+ sms+draft sms too..right?
Any advice?
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
sky770 said:
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
acultr said:
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
Click to expand...
Click to collapse
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
sky770 said:
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
Click to expand...
Click to collapse
read the previous post
acultr said:
read the previous post
Click to expand...
Click to collapse
Is there a way I can determine which screen do I have..now that I have already flashed my device and cannot access es explorer and stuff?
I do have access to 4ext recovery and adb console :|
Is it possible to navigate to / or /sys using adb console?
Also, suppose even if I do have the MDDI type of screen and I flash the MDDI kernel img but will that mean that I won't be able to adjust screen brightness and stuff?
Just flashed the MDDI kernel..waiting for reboot proc to complete...
I hope this doesn't fail this time.. :|
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
now its been ~2-3mins still stuck on the HTC screen :| (even after flashing the MDDI kernel)
Do I have to re-clear/wipe the cache..after flashing the ROM? or re-flash the ROM itself? (as I have read in some posts that it usually works after clearing the dalvik/cache and/or reflashing the same ROM again)
Can you provide me with the command I can use on adb console to find out the brand of my screen's manufacturer ?
Update:
I had flashed the ROM and then flashed the google apps pkg and then after a reboot now again flashed the MDDI kernel.
Is it the correct sequence to install the MDDI kernel?
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
I have shifted my issue to this thread: http://forum.xda-developers.com/showthread.php?p=37933379
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downloads. Reboot into recovery using adb, try not to pull the battery unless you really have to then if you do wait a couple of seconds before replacing it
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downlosd
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
go to recovery restore your prev. ROM and check the panel
Step 1. Find out which screen panel your device has:
1) Download and install Android Terminal Emulator from Google Play Market
2) Open the application and type in these commands:
(WARNING: to use these commands - you must be rooted with either Superuser or SuperSU AND have BusyBox installed on your phone)
su
dmesg|grep -i panel
If the app shows you any text with word "sony" in it - then your device has a screen panel made by Sony (obviously). If that's the case - you can just close this thread at once and don't worry that your device might freeze at "HTC Quietly Brilliant" screen after flashing a ROM. Otherwise, proceed forward.
OR
1) Open up a file manager that has an ability of browsing any partition above the default SD-card directory and can access the system partition
You can use either ES File Manager or Root Explorer
2) Navigate to /sys/android_display
If there is a file called "sony ****** wvga" - then you have a Sony panel. Otherwise - you device has a panel by Hitachi.
Step 2. Download a MDDI kernel developed by Andromadus:
For Android 4.0.x & 4.1.x, use this link --> http://goo.im/devs/Super/andromadus/...kernel_82n.zip
For Android 4.2.x, use this link --> http://andromadus.flinny.org/sites/a...212.zip&nid=16
Step 3. Flash the MDDI kernel:
If you are S-OFF --> just flash the .zip file with the kernel after flashing the ROM and GAPPS package through "install zip from sdcard"
If you are S-ON --> use the following instruction:
Thanks for Fatal1ty 18 RUS:good:
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
Click to expand...
Click to collapse
Stop opening fresh threads, people tend to ignore you More if you constantly open threads. I had a couple of panicky moments when i first did mine. Just take a deep breath and start again
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
sky770 said:
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
Click to expand...
Click to collapse
command:adb devices
acultr said:
command:adb devices
Click to expand...
Click to collapse
prints:
List of Devices attached
it is showing nothing :'(
cm10 for sky a830 .......everything is working fine .....but if you find any bug notify me
Rom download address ::::::::-------
https://www.dropbox.com/sh/b5xdg3dgrwq7thh/jIrUxFS8Cc
for k and s version patches are in this link
hassantalal11 said:
cm10 for sky a830 .......everything is working fine .....but if you find any bug notify me
Rom download address ::::::::-------
https://www.dropbox.com/sh/b5xdg3dgrwq7thh/jIrUxFS8Cc
for k and s version patches are in this link
Click to expand...
Click to collapse
This just Hour Rom Final really?
did you flash it?
yes i have flashed it.and this rom is working like charm
uploading new rom.......wait for 1 hour
:fingers-crossed:
I know noobish question, but ive been trying for 2+ hours now without any luck..so can you tell me how to install this? these are the steps I currently follow
reboot phone to fastboot (phone is already rooted)
use fastboot to run CWM (6.0.3.1)
select wipe cache
select factory reset/wipe userdata
select mount and storage-> format sdcard/system partition
select advanced->wipe dalvic cache
select instal zip from sd card-> install from sd card-> select the downloaded zip file
zip file installs...
select go back
select reboot system now
and now when the phone restarts, I see a black screen that says
VEGA
the brightest star in the SKY
Pantech
and it just stays stuck there....
Note that I previously installed official 4.1.2 on my device....
thanks in advance.
death_relic0 said:
I know noobish question, but ive been trying for 2+ hours now without any luck..so can you tell me how to install this? these are the steps I currently follow
reboot phone to fastboot (phone is already rooted)
use fastboot to run CWM (6.0.3.1)
select wipe cache
select factory reset/wipe userdata
select mount and storage-> format sdcard/system partition
select advanced->wipe dalvic cache
select instal zip from sd card-> install from sd card-> select the downloaded zip file
zip file installs...
select go back
select reboot system now
and now when the phone restarts, I see a black screen that says
VEGA
the brightest star in the SKY
Pantech
and it just stays stuck there....
Note that I previously installed official 4.1.2 on my device....
thanks in advance.
Click to expand...
Click to collapse
you will need to install official icecream sandwich if want to install this rom...
link isn't working?
Zeuik said:
This just Hour Rom Final really?
did you flash it?
Click to expand...
Click to collapse
Please update link with latest update
I want rom for the sky vega a860 and the procedure also please tell me ????
Please i need your help about :
my phone is samsung galaxy i9003
my software now is jelly bean 4.1.2
I need to update my phoen to jb 4.2.2
can any one help me ??
i posted this thread in Q and A and no one help me
Please i need help
all i need to update my phone from android 4.1.2 to 4.2.2
please help me
Thanks ,,,
Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards
ASMI1 said:
Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards
Click to expand...
Click to collapse
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?
dr_amjad said:
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?
Click to expand...
Click to collapse
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.
mustafahussain said:
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.
Click to expand...
Click to collapse
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
Thank you very much for your reply
i will try and tell you
but i will not do any thing about : Data wipe/Factory reset & 5. Format dbdata. , right ??
Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
Redownload rom.
Sent from my GT-I9003 using xda premium
dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
dr_amjad said:
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply
Click to expand...
Click to collapse
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
How to install
Warning only for lasted base CM10 Alpha4
if older base CM10 Alpha3 Full KPE please !!!
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Flash first clean for mandatory starting
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
Click to expand...
Click to collapse
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
Thank you very much mr ASMI 1 for your reply
but sorry i am still Noob in android development and updating
but according to your reply i must do :
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Right ??
and please is there a video about my case (( updating samsung gt i 9003 from cm 10 alpha 3 to cm 10.1 alpha 8 )) ??
and sorry for annoyance you
ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))
dr_amjad said:
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))
Click to expand...
Click to collapse
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
mustafahussain said:
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Click to expand...
Click to collapse
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????
dr_amjad said:
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????
Click to expand...
Click to collapse
No, to upgrade from previous version of CM10 follow this:
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Click to expand...
Click to collapse
and then
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
here where to download CM10 A4 and google apps(20121011 for CyanogenMod 10.0.x) (thanks to master dhiru1602).
BTW, in the past we used to install XXKPE stock rom (pit, bootloader, PDA, Phone, and CSC)(this is what meant by full KPE) and then install DDLF2 as PDA in download mod. But now full DDLF2 is out so we don't need XXKPE anymore to make clean install, you just install full DDLF2 (pit, bootloader, PDA, Phone, and CSC) the same way you install XXKPE and then proceed with installing your custom rom.
it is recommended to make clean install always before installing any custom rom (CM or rom based on CM) to prevent any issue (installing custom rom over another custom rom may cause some problems like lags and no signal issue...etc) just make clean install.
I advise you to upgrade only if, for example; you want to update to REMICS rom and you have previous version of REMICS rom or you want to update to carbon rom and you have previous version of carbon rom or you want to update to CM10.1 A8 rom and you have previous version of CM10.1 A7 rom...Do you get my point?
As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......
Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c
Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Bug Fixes:
Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later
sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.
Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:
Does security and cleaner app works fine or still has reboot issues...
Inbuilt browser fc..
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
sujon3903 said:
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
Click to expand...
Click to collapse
Nice one, Man. If you need some help, I am here.
Does this work on LUA-U23?
DiegoxG said:
Does this work on LUA-U23?
Click to expand...
Click to collapse
This ROM, is developed by dev on android latino org. So you can ask the dev, Does this ROM can be used on U23.
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
viper7144 said:
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
Click to expand...
Click to collapse
Can you give screenshot and logcat?
will this remove huawei apps like huawei backup??
drkpntr said:
will this remove huawei apps like huawei backup??
Click to expand...
Click to collapse
Well, Installing custom ROM will remove official features like cloud storage, device account, system data, and user data.
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
drkpntr said:
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
Click to expand...
Click to collapse
I think huawei backup will not work properly, because Huawei system use huaweisdk and sync data to account. If you do that, the apps will force close, because Not all custom ROM have same process. Example, you are installing huawei backup, This mean the huawei backup cant work properly(force close) or else. You need a SDK to run huawei system apps. (Like MIUI from Xiaomi)
---------- Post added at 10:50 AM ---------- Previous post was at 10:45 AM ----------
If you want to try please backup your data and system. And Try to install huawei backup. if the apps force close. You can go back to your previous ROM
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
pojunkampar said:
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
Click to expand...
Click to collapse
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Reed_405 said:
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Click to expand...
Click to collapse
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
pojunkampar said:
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
Click to expand...
Click to collapse
Before trying to install this ROM, you must follow the order first.
1. Unlock Bootloader
2. Installing Philz/CWM/TWRP
3. Do wipe
4. Install the ROM, SuperSU, and other stuff
5. Reboot system
6. Wait 5-10 minutes
7. Enjoy
Why is my phone stuck on start after flashing the Rom .
Sandip Rai said:
Why is my phone stuck on start after flashing the Rom .
Click to expand...
Click to collapse
Have you follow the instruction?
The link is down.... Anyone please give new download link
aroien said:
The link is down.... Anyone please give new download link
Click to expand...
Click to collapse
Okay, since the owner didnt active to reply this message. So I would like to say that this is like disbanded. If I have time I ll give the link. Please wait.
Link not Working
Link not Working
Download Link.........
Cyanogenmod 12.1 Custom Rom please give me the download link..