Database Info

[Q] How to Install Brand New OS for Nexus S

Hi All,
Is there any guide on installing a brand new OS for Nexus S (GT-I9020T) ? Somehow my OS crushed and during boot up it stucks on the Google Screen.
Thnx !
Kees

1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready

manthos1978 said:
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
Click to expand...
Click to collapse
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees

karabaci said:
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
Click to expand...
Click to collapse
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.

ej8989 said:
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
Click to expand...
Click to collapse
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees

karabaci said:
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
Click to expand...
Click to collapse
You need to update your custom recovery.
Download CWM 6.0.1.0 here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-crespo.img
Put it anywhere in your pc, or even on your sdcard.
Then go to command prompt and type fastboot flash recovery <put EXACT img file location and name here>

Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees

karabaci said:
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
Click to expand...
Click to collapse
Because you have a custom recovery, no.
That's the advantage of using a custom recovery though, you can just download and flash any newly updated ROM/s instead of waiting for the official google update.

help reg installing probam..!!

hi
i tried to install probam v1.2.3 (4.4.2 kitkat) on my i9003 from 4.3 liquid smooth, i succeeded but, i cant find goole play in probam, also installing playstore failed, so i have restore back to liquid smooth,
can somebody helpout...!!
Thanks

prabuflash said:
hi
i tried to install probam v1.2.3 (4.4.2 kitkat) on my i9003 from 4.3 liquid smooth, i succeeded but, i cant find goole play in probam, also installing playstore failed, so i have restore back to liquid smooth,
can somebody helpout...!!
Thanks
Click to expand...
Click to collapse
have you installed gapps too ?
if not, install it too

nasheich said:
have you installed gapps too ?
if not, install it too
Click to expand...
Click to collapse
hi its included in the probam zip file itself
http://forum.xda-developers.com/showthread.php?t=2562490

prabuflash said:
hi its included in the probam zip file itself
http://forum.xda-developers.com/showthread.php?t=2562490
Click to expand...
Click to collapse
nope, it's not(there's a new rules for not including the gapps on the rom)
and please read again on the thread
1. Copy the downloaded ProBAM to your phone.
2. update recovery, is required for install android kitkat
3. Boot into your recovery
4. Back up your ROM
5. Enter recovery
6. Make full wipe "included "system"
7. Select Recommended kernel for first install
8. Install the ROM
9. install GAPPS package
10. Reboot - the first boot can take up to 2 minutes
11. Recommended to Reboot again after ROM is up for the
first time
12. 2 second to up ! and 1 second to restart or shutdown !
it is ProBam
see the number 8 & 9
contact the developer or you can search the gapps for Kitkat on XDA,

[Updated to v5.10.29] [Xolo Q3000] [ROM] MiUi7_v5.10.15 with updates

As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......

Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c

Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA

Bug Fixes:

Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later

sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?

Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,

iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.

Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.

sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:

Does security and cleaner app works fine or still has reboot issues...

Inbuilt browser fc..

[StockFirmware] Vodafone Smart Tab 4 3G 4.2.2->7.0.1 TWRP and NOUGAT UPDATED!

THIS PROJECT IS NO LONGER SUPPORTED.
UPDATED 27/04/2017 Content written in RED...... NEW UPDATE 24/3/2018 CONTENT WRITTEN IN BLUE
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
24/3/2018: Miui8 Added. Flash and Go as usual. No NVRAM fix needed (at least i didn't need to flash it,you might have to if you get the nvram error in wifi).
-BUG: You have to manually set IP, dont let it do it automatically DHCP is broken in this build
***Please tell me any extra info as i haven't fully tested it out yet***
24/3/2018: Lineage OS (6.0.1): same as always with 6.0.1 aosp builds, Flash, Dont reboot and install nvram fix. then reboot and your good to go. Might need Gapps in this build.
24/3/2018: !!!THE BIG UPDATE TO NOUGAT!!!!
-Resurrection Remix Nougat:
Install as usual, no Nvram fix is needed this time around.
Download and install gapps 7.0.1 pico or what ever version you like.
If you have a SD-card inserted a warning will pop up, if you have files on there remove them before flashing the rom. After you have saved your files format it as internal and you will be good to go.
*ALSO KERNEL SOURCES ARE NOW AVAILABLE*
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***

Reserved

Links are now live and ready! Removed country lock from firmware so it can be installed on any Vodafone Smart Tab 4 in any country and on any *Service.
*Haven't been able to find a tester.

Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?

lintronics said:
Hi Valkiry,
when I tried to make the update I got an error. Now when I'm doing a normal start the system hangs on the boot logo.
The error message said:
No file_contextsVerifying current system...
assert failed? apply_patch_check("/custpack/JRD_custres(app/ApplicationsProvider-res.apk", "a6aa8e9828f16678621e20a88221dd44e40ba220", "2990a98b2c09688ce0c01ef5ca1be0aff3d88414")
Installation aborted.
Please continue to update your system !
Any ideas?
Click to expand...
Click to collapse
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%

Brilliant. Took a bit of trial and error since I've not worked with this tool before but got my tablet updated to 4.4.2 at last. Thanks so much for putting this together, I really thought I'd be stuck on 4.2. Just gotta figure out how to root now, that doesn't seem to be working.

How to find exact model of my Vodafone Smart Tab 4 ?

Can i flash this on my iusacell alcatel pop 8 p320a? I need kitkat

Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help

Artur1993 said:
Stock rom is in rar file, i cant select it to install stock rom, it has to be zip file
Any idea would help
Click to expand...
Click to collapse
Just change the file extension to Zip
---------- Post added at 03:00 AM ---------- Previous post was at 02:58 AM ----------
Valkiry said:
Sorry for the late reply. My wife just had a baby. You need to remove super user before you apply the update. The update wont work with SU. Its batter to do it with stock 100%
Click to expand...
Click to collapse
Does this allow the Tab to make and receive calls over GSM? Is this unbranded firmware not Vodafone firmware?
You need root access to install custom recovery via adb in fastboot, so you mean get root, install recovery then remove SU before flashing?

Okay so the first dump (4.2.2) is stock firmware from Hungary Vodafone used by mtktools to flash, please not this does not have super user so your device is allowed to update to the 4.4.2 file.
Second file is an update to 4.4.2 for those that missed out on the OTA release because they had root.
Third file is a custom debloated 4.4.2 flashable through CWM.
Never install SU on hungary 4.2.2 firmware as you will never get to upgrade to 4.4.2 firmware.

Updated with new files please check post #1

Gapps on RR v5.7.4 is now fully functional. Enjoy please dont Forget to hit that Thanks button!

New RR 5.7.4 Update:
THIS IS A TWRP RESTORE METHOD!
Replace DATA.* and SYSTEM.* files in one of your own backups of RR5.7.4!
Updated SU to 2.79
Busybox Updated
Gapps Installed
DivineBeats V9 installed
Please note there will be alot of missing apps as i needed to make room in system partition for this. There will be no call functionality, or messaging functionality. Also music player app is gone along with YGPS and Adaway. Let me know how you guys go

Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).

Where is the Scatter File for MT8382?

Cookiestalker said:
Where is the Scatter File for MT8382?
Click to expand...
Click to collapse
There is no scatter file for MT8382. Vodafone changed it to lock people out of backing up. The original scatter file provided is the real device code. Why are you asking for MT8382?

przenczo said:
Where can I find Resurrection Remix in zip file ? Because there is not in your files (only RR 5.7.4 in rar file).
Click to expand...
Click to collapse
Extract the files and re-ZIP it as a zip file. I made a mistake. It won't affect install

Valkiry said:
UPDATED 27/04/2017 Content written in RED
Stock Firmware Release Android 4.4.2 For Vodafone Smart Tab 4 3G (MT8382)(MT6582)(OT-P323x-2MVDAU2-Unlocked Network)
-Unlocked Firmware (Any Network is usable as far as i know)
-2MDVAU2 Release (Australian - Vodafone)
As Close to Stock as possible with a few extras:
-SuperUser v2.65
-CWM Custom Recovery (for Versions 4.2.2 and 4.4.2)
-TWRP-3.0.0.0 by @jemmini Flashable (Working MTP and more)
-Scatter File for MT8382/MT6582/OT-p323x-2MVDAU2
-included Update.zip from 4.2.2 to 4.4.2
-CyanogenMod 13 Rom Flashable Fully functional AOSP With Gapps package included. -Tested by me
-Ressurection Remix Rom Flashable v5.70 and V5.7.4 Now have fully functional Gapps installed (By Yours truely), Must use TWRP3.0.0.0 and after install and reboot flash NvramFix. and you're good to go -Tested By Me
27/4/2017: New RR5.7.4 With Updated SU, BusyBox, Gapps and DivineBeats9.0. Please note this is a TWRP recovery so replace DATA and SYSTEM into one of your own backup's of RR5.7.4! Let me know if this works for you please and be careful! Make sure you know what you are doing!
Install Stock Firmware 4.2.2 using SPFlashTools:
-Make sure you boot into recovery and factory reset before first use!
Install Update from 4.2.2 to 4.4.2:
-Make sure the device is stock! No root or you will encounter errors. Custom recovery works fine, no issues.
-Place Update.zip on root of SD-card or internal if you dont have an SD-card
-Apply Update
-Reboot
Installing Custom Recoveries Using SPFlashTools(Doesnt matter which android you are running 4.2.2 or 4.4.2 they both work for each firmware):
-Install either 4.2.2 or 4.4.2 OR TWRP3.0.0.0
*You might find that if you install 4.4.2 CWM on 4.4.2 firmware the next reboot will cause recovery to revert to stock. To stop this install CWM 4.2.2 (Yes it works), then try to reboot and it will ask you to "stop stock recovery from installing after reboot?" Select yes and dismiss Super user question as you'll get stuck in bootloop.
PLEASE MAKE SURE YOU FACTORY RESET AFTER INSTALLING ANY FIRMWARE! INCLUDING STOCK RELEASE!
Downloads:
You will find all the files here
Credits:
@Chainfire For SU
@benjaminwan -CWM V6 4.2.2
@cofface -CWM v6 4.4.2
*Links are not to be shared without prior consent*
***I'am not responsible for any damage you may cause to your device, Use at your own risk and make sure you know what you're doing!***
Click to expand...
Click to collapse
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy

bussi2010 said:
I want to thank you. smart tab runs with rr if you get Android 7.1 I would be happy
Click to expand...
Click to collapse
Glad I could help you out dude! There is 7.1 floating around but it's not very good and I don't use this device much anymore. If I do end up doing it ill post it here. Don't forget to hit tthat thanks button

I have successfully downgraded from Pie to Oreo G965F (Custom Rom)

Hello, I will try to be very fast & clear with this:
It's a custom 8.0 Oreo rom works with Pie bootloader (U6CSGD) , thanks to @yash92duster for his amazing work.
So how? PLEASE READ THE COMPLETE TOPIC FIRST!!
1- Installed TWRP from here https://forum.xda-developers.com/ga...cross-device-development/twrp-exynos-t3763464 (DO AN EFS BACKUP WITH TWRP JUST INCASE)
2- Installed TeamExyKings' LightRom from here: https://forum.xda-developers.com/ga...ross-device-development/rom-lightrom-t3770243
3- I just downloaded the LightRom (Not AddOns) and flashed it wia TWRP (Read Step 4 before installing!).
Installation instructions from topic:
*In TWRP Recovery Format The Following:
--"Internal, System, Dalvik/ART, Cache"
*Flash ROM Zip
*Reboot And Enjoy The ROM
*** It May Take A While For ROM to Boot, So wait patiently ***​
YOU CAN MOVE THE ROM TO DEVICE AFTER FORMAT OR YOU CAN SIMPLY INSTALL FROM EXT SD CARD
4- Instal TTS if you want to add accessibility services such as (Bixby remapper/Navigation bar gestures)
- If you choose anything about bixby remapping while installing the rom you can't change it after installing even with remapper (or Idk how )
- Choose Samsung keyboard if you want to use UPSM.
- I Chose TGB kernel and have no idea about the stock kernel and how it works but TGB works without problems.
- Choose ''Netflix fix' 'if you want to use Netflix. Then, install this version: https://www.apkmirror.com/apk/netflix-inc/netflix/netflix-6-26-1-build-15-31696-release/
BONUS
Idan's GCam 4.1: https://forum.xda-developers.com/showpost.php?p=78101115&postcount=164

How do you install twrp on a locked bootloader?

revized said:
How do you install twrp on a locked bootloader?
Click to expand...
Click to collapse
He's using the Exynos version. The Exynos variant isn't bootloader locked, only U.S. Snapdragon variants.

Why u did that pie rom better than oreo what's the point of coming back to oreo ????

Adham_android said:
Why u did that pie rom better than oreo what's the point of coming back to oreo ????
Click to expand...
Click to collapse
Better battery life
Call recording (Removed on Pie by Samsung)
Pro video mode (Removed on Pie by Samsung)
perfect camera quality (Better than original camera like 10 times) with Idan's Gcam for rooted rom
So why not?

I did it step by step. Works very well. thanks bro

alimokhtarabadi said:
I did it step by step. Works very well. thanks bro
Click to expand...
Click to collapse
You're welcome

Could someone help me with flashing oreo 8.0 from pie 9.0? I am very confused and I do not want to make any mistake or choose the wrong one. Help me out here. Thank you.

xProudDeafLadyx said:
Could someone help me with flashing oreo 8.0 from pie 9.0? I am very confused and I do not want to make any mistake or choose the wrong one. Help me out here. Thank you.
Click to expand...
Click to collapse
Well, first of all: ''do this at your own risk, your warranty will be voided! and you wont be able to use Samsung pay, Samsung Pass, Knox, Secure Folder (I think there are some ways for this but dont know how)''.
1- BACKUP ALL YOUR FILES (PHOTOS, DOCUMENTS) AND BACKUP THINGS LIKE WHATSAPP TO GOOGLE DRIVE! I MEAN BACKUP EVERYTHING! Because everything in your phone will be deleted!
2- Download this ROM: https://forum.xda-developers.com/ga...ross-device-development/rom-lightrom-t3770243 or just download from this link: https://androidfilehost.com/?fid=6006931924117939052 (Tell me if it's slow, I will try to upload it to my Google Drive)
2- Install TWRP from here but remember to read all steps BEFORE YOU START!! https://forum.xda-developers.com/ga...cross-device-development/twrp-exynos-t3763464
3- Once you installed TWRP turn off your phone and reboot into TWRP by pressing [VOLUME UP] + [BIXBY] + [POWER].
4- Select "Keep /system RO" as usual.
5- Go to "Wipe" menu of TWRP -> Advanced Wipe. Select ''Dalvik / ART Cache, System, Data, Internal Storage, Cache'' and Wipe.
6- Connect your phone to PC and copy the ROM to internal storage (similar to how you transfer files when in system).
7- After copying the ROM to your phone, from TWRP go back to main menu then go to ''Install'' and flash your ROM.
8- Once you press Install Zip, Aroma Installer will be started I mentioned things I did in the post you can check them.
If you didn't get any part feel free to ask and mention which part yo didn't understand or you couldn't do it, from here or DM, wont matter.
Hope this helps you

Piknie działa - perfekt going - BIG THX

Do I have to wipe internal storage for the ROM to work or can I just skip the internal storage ?

Sparko612 said:
Do I have to wipe internal storage for the ROM to work or can I just skip the internal storage ?
Click to expand...
Click to collapse
I'm not sure but it's better to do a clean install. You can give it a try but I don't recommend it.

Download link please
The Rom download link/mirrors are down. you have the drive link handy?