Hi all,
I want to install Andromadus ROM Build 13 on my DS and currently have stock 2.3.3 installed.
As this will be my first custom ROM and also I couldn't find any how-to to install Andromadus on an HTC Desire S so, I am posting it here.
I have 4EXT touch recovery, S-OFF'ed and the HBoot is downgraded to 0.98.2000 (PG8810000).
So, where do I start? I am making backups using 4EXT recovery and downloading "flinnycm101_saga_13.zip" & "gapps-jb-20121212-signed.zip" from http://andromadus.flinny.org/?q=node/24
but as posted on the same page..I have a doubt of whether to flash the MDDI kernel too? Is that required to be flashed on an HTC Desire S ?
Any full length how-to's will be appreciated.
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
oddoneout said:
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
Click to expand...
Click to collapse
So, Can I use 4ext's recovery app to boot into recovery mode >> then format System
>> Format Data
>>Format Cache
>> then Format Boot
>> Wipe Data/Factory reset (1st option in wipe/format menu)
>> Wipe Dalvik Cache
>> n then finally install zip (ROM) from sd card and flash the rom..
>> then flash then gapps zip?
Also, isn't 4ext's backup option backs up my apps, app's data and the contacts too? :| um..what about the draft message(s) ? will that be backed up too using 4ext recov.?
But I guess I won't be able to restore them on an individual basis when I am done flashing the new ROM? As 4ext's created backup can only restore the full backed-up data which includes the old ROM itself!
Update: backing up apps+data using Titanium backup pro..so that will backup my contacts+ sms+draft sms too..right?
Any advice?
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
sky770 said:
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
acultr said:
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
Click to expand...
Click to collapse
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
sky770 said:
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
Click to expand...
Click to collapse
read the previous post
acultr said:
read the previous post
Click to expand...
Click to collapse
Is there a way I can determine which screen do I have..now that I have already flashed my device and cannot access es explorer and stuff?
I do have access to 4ext recovery and adb console :|
Is it possible to navigate to / or /sys using adb console?
Also, suppose even if I do have the MDDI type of screen and I flash the MDDI kernel img but will that mean that I won't be able to adjust screen brightness and stuff?
Just flashed the MDDI kernel..waiting for reboot proc to complete...
I hope this doesn't fail this time.. :|
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
now its been ~2-3mins still stuck on the HTC screen :| (even after flashing the MDDI kernel)
Do I have to re-clear/wipe the cache..after flashing the ROM? or re-flash the ROM itself? (as I have read in some posts that it usually works after clearing the dalvik/cache and/or reflashing the same ROM again)
Can you provide me with the command I can use on adb console to find out the brand of my screen's manufacturer ?
Update:
I had flashed the ROM and then flashed the google apps pkg and then after a reboot now again flashed the MDDI kernel.
Is it the correct sequence to install the MDDI kernel?
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
I have shifted my issue to this thread: http://forum.xda-developers.com/showthread.php?p=37933379
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downloads. Reboot into recovery using adb, try not to pull the battery unless you really have to then if you do wait a couple of seconds before replacing it
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downlosd
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
go to recovery restore your prev. ROM and check the panel
Step 1. Find out which screen panel your device has:
1) Download and install Android Terminal Emulator from Google Play Market
2) Open the application and type in these commands:
(WARNING: to use these commands - you must be rooted with either Superuser or SuperSU AND have BusyBox installed on your phone)
su
dmesg|grep -i panel
If the app shows you any text with word "sony" in it - then your device has a screen panel made by Sony (obviously). If that's the case - you can just close this thread at once and don't worry that your device might freeze at "HTC Quietly Brilliant" screen after flashing a ROM. Otherwise, proceed forward.
OR
1) Open up a file manager that has an ability of browsing any partition above the default SD-card directory and can access the system partition
You can use either ES File Manager or Root Explorer
2) Navigate to /sys/android_display
If there is a file called "sony ****** wvga" - then you have a Sony panel. Otherwise - you device has a panel by Hitachi.
Step 2. Download a MDDI kernel developed by Andromadus:
For Android 4.0.x & 4.1.x, use this link --> http://goo.im/devs/Super/andromadus/...kernel_82n.zip
For Android 4.2.x, use this link --> http://andromadus.flinny.org/sites/a...212.zip&nid=16
Step 3. Flash the MDDI kernel:
If you are S-OFF --> just flash the .zip file with the kernel after flashing the ROM and GAPPS package through "install zip from sdcard"
If you are S-ON --> use the following instruction:
Thanks for Fatal1ty 18 RUS:good:
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
Click to expand...
Click to collapse
Stop opening fresh threads, people tend to ignore you More if you constantly open threads. I had a couple of panicky moments when i first did mine. Just take a deep breath and start again
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
sky770 said:
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
Click to expand...
Click to collapse
command:adb devices
acultr said:
command:adb devices
Click to expand...
Click to collapse
prints:
List of Devices attached
it is showing nothing :'(
Related
This thread is reserve for nightly build of CyanogenMod Rom for HTC Desire GSM (cdma version here)
CyanogenMod is a free, community built distribution of Android 2.2 (Froyo) which greatly extends the capabilities of your phone.
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on nightly builds is the leading
** cause of male impotence.
What are Nightly build? Auto compiled build of the latest CyanogenMod source from github. This version change each night and aren't officialy supported.
If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Warning : Not for new user, flash this build only if you know what you are doing !!!
INSTRUCTIONS:
- First time flashing CM 6 to your Desire (or coming from another ROM)?
1. Root your device and install Clockwork Recovery (Unrevoked method is recommended).
2. Do a Nandroid backup!
3. Update your radio if needed (720p require 5.x radio)
4. WIPE (wipe data/factory reset + wipe cache partition)
5. Install the ROM
6. Optionally install the Google Addon
- Upgrading from earlier CM6?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
There are no Google Apps bundled with CM ROMs, because Google asked Cyanogen to remove copyrighted apps, after flashing rom don't forget to flash Google Addon package if you want it.
Latest version: http://mirror.teamdouche.net/?device=bravo
before flash is recommended to check the md5sum
CyanogenMod Enhancement:
ChangeLog / Twitter
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
thank's to gatsu_1981 and imfloflo for inspiration
Rooting Guide
http://forum.xda-developers.com/showthread.php?t=788044
Google Addon: latest HDPI-20101114
Other release http://goo-inside.me/google-apps/
Radio Firmware: 5.x radio required (GSM ONLY)
Desire GSM radio thread
Read/Write Access System Partition (S-OFF)?
Thank's to AlphaRev [site] [xda]
Low storage for apps?
Flash the AlphaRev HBOOT Bravo N1Table (Require S-OFF)
Follow this instrunction for update without data lost (aka no data wipe)
Still low storage for apps?
Install an A2SD solution: Firerat or Darktremor
i recommend the Firerat solution: CM specific, less space usage 25kb vs 6mb, bind mount, no boot loop, auto restore after cm rom update (from 1.35b)
Fantastic, thanks Kali!
bemymonkey said:
Fantastic, thanks Kali!
Click to expand...
Click to collapse
+1
And don't post questions before reading the 300+ pages of this thread: http://forum.xda-developers.com/showthread.php?t=719544
Just kidding. But I thought a reference to the old thread could be useful.
yuo should add a link to alpharevs s-off and modified partition table
deleted .
the developt is in 6.1 cyanomod nightly updated right?
Latest nigthlies have been rock solid for me. My only complaint is the annoying credential storage password, which I must enter every time I reboot the phone if I want to connect to 802.1x wifi networks. Other than that, 16x have been flawless.
*cheers kali on*
Finally an up to date thread. Reading your post I learned something. I didn't know firerat a2sd now works with cyanogen.
Anyone got experience migrating from dta2sd to firerat?
Swyped with my S-OFF'd brain using teh internetz
Is there a patched Amon Ra recovery image that allows you to use the N1 partition table ?
why woud you patch it?? just use n1 table and default amon ra
madman_cro said:
why woud you patch it?? just use n1 table and default amon ra
Click to expand...
Click to collapse
So would I be correct in saying that all I have to do is "fastboot flash hboot bravo_alphaspl-n1table.img" followed by a full wipe.
ganjamu said:
So would I be correct in saying that all I have to do is "fastboot flash hboot bravo_alphaspl-n1table.img" followed by a full wipe.
Click to expand...
Click to collapse
what i did was
fastboot erase cache
fastboot flash hboot bravo_alphaspl-n1table.img
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot flash recovery blablabla
wiped all from recovery and installed rom
madman_cro said:
what i did was
fastboot erase cache
fastboot flash hboot bravo_alphaspl-n1table.img
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot flash recovery blablabla
wiped all from recovery and installed rom
Click to expand...
Click to collapse
Thanks! I will give it a shot tonight and let you know how it goes.
Would this also work?:
nandroid backuo
fastboot erase cache
fastboot flash hboot bravo_alphaspl-n1table.img
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot flash recovery blablabla
nandroid restore
stingerpl said:
Would this also work?:
nandroid backuo
fastboot erase cache
fastboot flash hboot bravo_alphaspl-n1table.img
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot flash recovery blablabla
nandroid restore
Click to expand...
Click to collapse
Yes! Absolutely no problem... (but if you already have recovery, then there is no need to flash a new one)
Am I the only one having problem with build163? The zip won't install from my recovery, just stating it's 'bad'. I already redownloaded it. It unzip's fine on my linux box. I even rezipped it but my recovery keeps refusing to start the install process.
I'm a bit stumped here.
dipje said:
Am I the only one having problem with build163? The zip won't install from my recovery, just stating it's 'bad'. I already redownloaded it. It unzip's fine on my linux box. I even rezipped it but my recovery keeps refusing to start the install process.
I'm a bit stumped here.
Click to expand...
Click to collapse
Have you tried diasabling signature verification?
vnvman said:
Have you tried diasabling signature verification?
Click to expand...
Click to collapse
It's disabled by default. It just says it can't read the .zip file. If I _enable_ verification it says it can't read the footer from the .zip. If I disable verification again it just says "can't open /sdcard/cm_bravo_full-163.zip (bad)".
I also have the same with build 162. I flashed pretty much every cm-nightly in the last few months and now all of a sudden this? What am I doing wrong .
I just installed the miui-desire.zip file again that was on my sdcard and it installed without a hitch. This is getting annoying .
EDIT: Solved it. Apparently there is a bug in my recovery. If I use the recovery the mount my sdcard over USB, afterwards /sdcard can get unmounted. So it couldn't find the .zip file I was choosing because /sdcard was not mounted. Why it was still possible to list the contents on the sdcard is a mystery to me. That must mean the recovery mounts /sdcard, lists the contents and then unmounts it again, and _then_ tries to start the update?!?
Anyway, going into the 'mounts and storage' menu and choosing 'mount /sdcard' suddenly made sure things worked again.
Really stumped how this happened.
dipje said:
It's disabled by default. It just says it can't read the .zip file. If I _enable_ verification it says it can't read the footer from the .zip. If I disable verification again it just says "can't open /sdcard/cm_bravo_full-163.zip (bad)".
I also have the same with build 162. I flashed pretty much every cm-nightly in the last few months and now all of a sudden this? What am I doing wrong .
I just installed the miui-desire.zip file again that was on my sdcard and it installed without a hitch. This is getting annoying .
Click to expand...
Click to collapse
What recovery image are you using? If you have amonRA you might try to fix this launching clockworkmod via fake flash and using that one to install the update. Otherwise if you already have clockwork you might try flashing amonRA via hboot and use that one...at times i can't perform something with one of the two recoveries, and using the other one often solves every issue for me
Hi, i received HTC sense 3.0 and android 2.3.5 update. I tried to update it but it stuck on boot screen. Restarting didn't help. So I wiped all the data but later realised I no longer have clockworkmod installed.
I go to hboot and try to put recovery on sdcard through adb, but adb cant find my device.
Is there anything I can do? My phone is pretty messed up now, and I don't know what to do RUU also doesn't work, because my phone can't be found.
// #1 OK I managed to install clockworkmod through the Android Flasher. I've downloaded BeatMod BlissSense Hybrid v2.1.zip but I cant install it through the clockworkmod. It says:
"E:Error in /sdcard/BeatMod BlissSense Hybrid v2.1.zip
(Status 1)
Installation aborted."
// #2 sorry to bother.. I disabled the verification check in clockworkmod, installed su-2.3.6.3-efgh-signed.zip and then custom ROM.. everything now works fine. Of course with the help of tutorials on xda and great people over here.
This was the worst 4 hours in my live as I thought my phone is bricked.
good for u man
Adidas108 said:
good for u man
Click to expand...
Click to collapse
+1
You don't appear alone with problem, so thanks for re-editing the thread post to provide updates, if you have the time and could try to add any URLs and links to the files that you used to resolve your issues, then that would be great!
I've already several threads where it appears the update has put others in the same position, so your update could prove to be a useful resource assisting the recovery of others!
Cheers.
Downloads:
Android Flasher: http://forum.xda-developers.com/showthread.php?t=794638 (different versions for different phones)
HTC Desire S Recovery: http://downloads.saga-lbc-mod.de/recovery-images/PG88IMG-RECOVERYIMG-3.2.0.0.zip (unzip and use only recovery.img)
SU (root): http://www.mediafire.com/?q3ujsx1m4uq1662
ROM (I used this): http://dev-host.org/80uvbx4wgf4l/BeatMod_BlissSense_Hybrid_v2.1.zip
----
Install ClockworkMod:
What you need to do is get the phone to fastboot and connect it to the PC via USB.
Launch and update Android Flasher. Choose your phone and browse for recovery image (recovery.img that you have unzipped)
Click finish and wait. Clockworkmod should by installed.
Get files on the phone:
Go to recovery
Mounts and storage menu
Mount USB storage
Then copy files (custom ROM you want to install and su-2.3.6.3-efgh-signed.zip) from PC to SD card
Install Root:
Go to recovery
Install zip from SD card
Toogle signature verification (disable it)
Choose zip from card and install su-2.3.6.3-efgh-signed.zip
Choose zip from card and install custom ROM
Optional steps? (right after installing clockworkmod)
Go to recovery
Wipe data
Go to advanced
Mounts and Storage menu
Format /sdcard
That's it. Hope it helps.
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
You forgott to flash the Kernel Use Fastboot for this.
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Open the Zip and Copy the boot.img to your pc
3)Put the ROM to sdcard
4)Boot your phone into fastboot (In Phone power off state press power + volume down)
5)connect to the pc via usb
6)use your commandline on pc + fastboot.exe and do the following command "fastboot flash boot <PathToTheBoot.ImgFromStep2>"
7)use your commandline on pc + fastboot.exe and do the following command "fastboot erase cache"
8)short press power on the phone to get in hboot
9)use volume down and then power to select "Recovery"
10)wipe data/factory reset
11)Flash rom
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
the_Storm said:
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
Click to expand...
Click to collapse
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
the_Storm said:
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
Click to expand...
Click to collapse
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thank you bro I will test it tonight...
If you have time would you look at this please
http://forum.xda-developers.com/showthread.php?t=1781182
Thank you ..
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thanks very much for all of this it will help me a lot when I get round to flashing!
In reference to this, when I'm coming to update to the latest version of this rom, what's the procedure to follow?
Hi,
I'm trying to flash Jellybean 4.1.1 build #27 but it fails no matter what. I have followed the procedure, flashed the rom, erased cache, wiped data/factory reset, rebooted on recovery.
Here's what I get:
-- Install /sdcard/tg_endeavoru-ota-27.zip ...
Finding update package ...
Opening update package ...
Installing update ...
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru"
E:Error in /sdcard/tg_endeavoru-ota-27.zip
(Status 7)
* Verifying filesystem...
* Verifying partition sizes...
Error Flashing zip '/sdcard/tg_endeavoru-ota-27.zip'
Failed
Any idea what I could be doing wrong?
Thank you very much in advance for your help.
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
I've got JB running on my phone but when I try to boot into recovery to install the apps it won't work. I get the red exclamation mark. I am coming from twrp2.2.0 I followed these instructions
Download the latest CM10 .zip file from here.
Download JB Google Apps from here.
Reboot into CWM or TWRP recovery.
Factory Data reset. (MUST DO THIS!)
Flash CM10 .zip file.
Reboot.
Reboot into recovery.
Flash JB Google apps.
Enjoy!
Any help would be great
jb 4.1.1 how screenshot??
hello All, this is my first quest in this forum. i'have flashed jb 4.1.1 in my device (one x) ad is all ok (wifi go in sleeping mode too fast but when it stand up go well) i need to make a lot of screenshot and i dont know how. Pls help
PS: i think this forum is very usefull for modding android, great work!!!)
Imerio
HavE fUn
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
I love you and thank you. Simple, easy, quick instructions
Hi All,
Is there any guide on installing a brand new OS for Nexus S (GT-I9020T) ? Somehow my OS crushed and during boot up it stucks on the Google Screen.
Thnx !
Kees
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
manthos1978 said:
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
Click to expand...
Click to collapse
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
karabaci said:
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
Click to expand...
Click to collapse
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
ej8989 said:
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
Click to expand...
Click to collapse
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
karabaci said:
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
Click to expand...
Click to collapse
You need to update your custom recovery.
Download CWM 6.0.1.0 here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-crespo.img
Put it anywhere in your pc, or even on your sdcard.
Then go to command prompt and type fastboot flash recovery <put EXACT img file location and name here>
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
karabaci said:
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
Click to expand...
Click to collapse
Because you have a custom recovery, no.
That's the advantage of using a custom recovery though, you can just download and flash any newly updated ROM/s instead of waiting for the official google update.
cm10 for sky a830 .......everything is working fine .....but if you find any bug notify me
Rom download address ::::::::-------
https://www.dropbox.com/sh/b5xdg3dgrwq7thh/jIrUxFS8Cc
for k and s version patches are in this link
hassantalal11 said:
cm10 for sky a830 .......everything is working fine .....but if you find any bug notify me
Rom download address ::::::::-------
https://www.dropbox.com/sh/b5xdg3dgrwq7thh/jIrUxFS8Cc
for k and s version patches are in this link
Click to expand...
Click to collapse
This just Hour Rom Final really?
did you flash it?
yes i have flashed it.and this rom is working like charm
uploading new rom.......wait for 1 hour
:fingers-crossed:
I know noobish question, but ive been trying for 2+ hours now without any luck..so can you tell me how to install this? these are the steps I currently follow
reboot phone to fastboot (phone is already rooted)
use fastboot to run CWM (6.0.3.1)
select wipe cache
select factory reset/wipe userdata
select mount and storage-> format sdcard/system partition
select advanced->wipe dalvic cache
select instal zip from sd card-> install from sd card-> select the downloaded zip file
zip file installs...
select go back
select reboot system now
and now when the phone restarts, I see a black screen that says
VEGA
the brightest star in the SKY
Pantech
and it just stays stuck there....
Note that I previously installed official 4.1.2 on my device....
thanks in advance.
death_relic0 said:
I know noobish question, but ive been trying for 2+ hours now without any luck..so can you tell me how to install this? these are the steps I currently follow
reboot phone to fastboot (phone is already rooted)
use fastboot to run CWM (6.0.3.1)
select wipe cache
select factory reset/wipe userdata
select mount and storage-> format sdcard/system partition
select advanced->wipe dalvic cache
select instal zip from sd card-> install from sd card-> select the downloaded zip file
zip file installs...
select go back
select reboot system now
and now when the phone restarts, I see a black screen that says
VEGA
the brightest star in the SKY
Pantech
and it just stays stuck there....
Note that I previously installed official 4.1.2 on my device....
thanks in advance.
Click to expand...
Click to collapse
you will need to install official icecream sandwich if want to install this rom...
link isn't working?
Zeuik said:
This just Hour Rom Final really?
did you flash it?
Click to expand...
Click to collapse
Please update link with latest update
I want rom for the sky vega a860 and the procedure also please tell me ????