Database Info

[Q] Update from 3.1 & Tiamat 1.4.4 failed

Help for a newbie.
I followed this procedure:
1 - Copied file to sd card and renamed to update.zip (in a windows computer)
2 - turned xoom on and wento to rom manager
3 - wiped user and dalvik cache
4 - Tried to load file from zip, but it was not possible to find the update .zip file.
I get the following message:
E: Can't open /sdcard/update.zip
(bad)
Tried also without renaming and got:
E: Can't open /sdcard/update_US-Xoom-Wifi-3.2_HTJ85B-from HMJ37_stachre-solarnz-boot-img_v05.zip
After many trials rebooted.
System info showed the same 3.1 and Tiamamat 1.4.4
Opened rom manager again.
seleced install rom from sdcard
System backed up info and rebooted.
Had to reload all apps from store.
System info shows I am running 3.1 and Tiamat 1.4.4.
Also I keep receiving a message that there is a system update available.
I can't understand what I did wrong.
I g
Can anyone help?
Thank you

rogerodd said:
Help for a newbie.
I followed this procedure:
1 - Copied file to sd card and renamed to update.zip (in a windows computer)
2 - turned xoom on and wento to rom manager
3 - wiped user and dalvik cache
4 - Tried to load file from zip, but it was not possible to find the update .zip file.
I get the following message:
E: Can't open /sdcard/update.zip
(bad)
Tried also without renaming and got:
E: Can't open /sdcard/update_US-Xoom-Wifi-3.2_HTJ85B-from HMJ37_stachre-solarnz-boot-img_v05.zip
After many trials rebooted.
System info showed the same 3.1 and Tiamamat 1.4.4
Opened rom manager again.
seleced install rom from sdcard
System backed up info and rebooted.
Had to reload all apps from store.
System info shows I am running 3.1 and Tiamat 1.4.4.
Also I keep receiving a message that there is a system update available.
I can't understand what I did wrong.
I g
Can anyone help?
Thank you
Click to expand...
Click to collapse
You may have the wrong version of CWM recovery installed. You need Tiamat v3.2.0.0 R4c. If you are trying to flash thru Rom manager it may have had you update to v4.0.0.4 which is not compatible with the external sdcard. If this is the case, re-install the correct recovery version, and then redo your backup so that it is on the external sdcard where it can be safe if you need to wipe/factory reset. You can use Rom manger just to reboot into recovery, or df Quick Boot from the market and use that instead.
Good luck!

okantomi said:
You may have the wrong version of CWM recovery installed. You need Tiamat v3.2.0.0 R4c. If you are trying to flash thru Rom manager it may have had you update to v4.0.0.4 which is not compatible with the external sdcard. If this is the case, re-install the correct recovery version, and then redo your backup so that it is on the external sdcard where it can be safe if you need to wipe/factory reset. You can use Rom manger just to reboot into recovery, or df Quick Boot from the market and use that instead.
Good luck!
Click to expand...
Click to collapse
Rom manager says it is 4.0.0.4 but when in recovery is say CWM recovery-Tiamat-R4c-100611-1150-cwm or Tiamat v3.2.0.0 R4c ( I don't remember exectly) and the error is the same.
Also, I tried reflash recovery-Tiamat-R4c-100611-1150-cwm.zip from the SD card and get an error.
I really don't have a clue of what to do.
Any help would be welcome.

rogerodd said:
Rom manager says it is 4.0.0.4 but when in recovery is say CWM recovery-Tiamat-R4c-100611-1150-cwm or Tiamat v3.2.0.0 R4c ( I don't remember exectly) and the error is the same.
Also, I tried reflash recovery-Tiamat-R4c-100611-1150-cwm.zip from the SD card and get an error.
I really don't have a clue of what to do.
Any help would be welcome.
Click to expand...
Click to collapse
The problem is that you can't flash anything from the external sdcard with v4.0.0.4. In rom manager, see if you can find"all clockwork recoveries" and find 3.2.0.0. If not, find 3.0.2.8 or 3.0.2.5 and flash one of them, preferably the latest of those I have listed. I think those will at least recognize your sdcard. If you can't do that, you will need to reflash the correct recovery the same way you did when you rooted. Remember, never flash a zip file through adb.
Good luck!

I tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img via adb.
I could flash boot sector. Then I reboot into recovery and try to apply zip from card with file update_US-Xoom-WiFi-3.2-HTJ85B-from-HMJ37_stachre_solarnz-boot-img_v05.zip, but there is a NO at the end of the name of the file and I can't go on.
Trying to rename as update.zip and run apply zip from card results in same error:
E: Can't open /sdcard/update.zip
(bad)
what should I do?
Thank you

possible bad download... download again... also, don't think this would be an update... leave it as originally named, just choose the option to choose which zip file to install from the sd card

rogerodd said:
I tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img via adb.
I could flash boot sector. Then I reboot into recovery and try to apply zip from card with file update_US-Xoom-WiFi-3.2-HTJ85B-from-HMJ37_stachre_solarnz-boot-img_v05.zip, but there is a NO at the end of the name of the file and I can't go on.
Trying to rename as update.zip and run apply zip from card results in same error:
E: Can't open /sdcard/update.zip
(bad)
what should I do?
Thank you
Click to expand...
Click to collapse
It sounds like you are flashing recovery ok, but you keep overwriting it with the stock recovery.
Here is some important information that should help a lot with making your new recovery "stick"and this was taken from the Idiot's guide to flashing...in the Development section, and originally written by publicanimal:
4. Install recovery image (CWM)
Download the recovery image file and save it to your computer
Boot into flash mode with 'adb reboot bootloader'
Install your downloaded recovery image
C:\Documents and Settings\Anders> fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo this section
Enter CWM with the following procedure
Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work, experiment with the timing ...
When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for reaching this far .
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. If that happens, or if you see "starting fastboot protocol " your timing wasn't right and you need to reflash the recovery image and try it again.
See original post,below for more information.
http://forum.xda-developers.com/showthread.php?t=1130996

[Q] HTC Tattoo Recovery Mode Menu incomplete

Hello everybody,
I own a HTC Tatto, I'm trying to update the system to Andorid 2.3 Gingerbread and I have a problem with recovery I cannot solve.
I'm following the instructions of site wiki cyanogenmod
(I put the text below, I can't make a link on the page on this first mine message!!)
I've rooted the phone succesfully, installed clockworkmod recovery of different relases (3.*, 5.*) both from adb and ROM manager, but when I try to flash CyanogenMod I coulden't.
I have only 4 voices on the recovery menu :
- recovery
- apply update.zip
- wipe data/factory reset
- wipe cache partition
I tried to use apply update.zip, but it gives me an error of no signature problem.
Following the guide I wanted to do the steps :
Install zip from sdcard.
Select Choose zip from sdcard. But I DON'T HAVE THEM ON THE MENU!!!
Please help, I'm going mad about this!
Thanks in advance,
Paolo F.C.

[Q] New PG888.zip Firmware Installation

OK - So I've flashed the latest Primo-s (V4.0) custom ROM and still having a few bugs - I've read through the forum that flashing the new firmware will help get rid of these bugs that I am experience. I have downloaded the firmware and placed it within the route folder on my SD care however, When I try to "apply update from zip" I receive an installation aborted error message, I am using the latest Clowkwork Touch recovery and have also tried installing the update via the ROM manager app. Can someone please advise.
Thanks

dannyhoughton74 said:
OK - So I've flashed the latest Primo-s (V4.0) custom ROM and still having a few bugs - I've read through the forum that flashing the new firmware will help get rid of these bugs that I am experience. I have downloaded the firmware and placed it within the route folder on my SD care however, When I try to "apply update from zip" I receive an installation aborted error message, I am using the latest Clowkwork Touch recovery and have also tried installing the update via the ROM manager app. Can someone please advise.
Thanks
Click to expand...
Click to collapse
You never install a firmware from recovery
Read teh forums
1) Put ZIP in SDcard
2) reboot into bootloader
3) the phone will detect the zip file and install it
4) reboot,, it might get stuck at boot animation
5) reboot into recovery and delte teh zip from sd card via adb shell
6) format cache and dalvik
7) reboot and enjoy..
If you would have read the forums, and threads you would have known what needs to be done.
If you are not comfortable with all of these steps, donot do any of it till you understand what they are!!!

Thanks for your reply. I was actually just posting to say please disregard this thread as I had now managed, It was as you said automatically detected.. Thanks anyway

Installing Jellybean on HTC one X but not botting

Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you

the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
You forgott to flash the Kernel Use Fastboot for this.
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Open the Zip and Copy the boot.img to your pc
3)Put the ROM to sdcard
4)Boot your phone into fastboot (In Phone power off state press power + volume down)
5)connect to the pc via usb
6)use your commandline on pc + fastboot.exe and do the following command "fastboot flash boot <PathToTheBoot.ImgFromStep2>"
7)use your commandline on pc + fastboot.exe and do the following command "fastboot erase cache"
8)short press power on the phone to get in hboot
9)use volume down and then power to select "Recovery"
10)wipe data/factory reset
11)Flash rom

the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??

the_Storm said:
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
Click to expand...
Click to collapse
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic

MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help

the_Storm said:
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
Click to expand...
Click to collapse
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything

MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thank you bro I will test it tonight...
If you have time would you look at this please
http://forum.xda-developers.com/showthread.php?t=1781182
Thank you ..

MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thanks very much for all of this it will help me a lot when I get round to flashing!

In reference to this, when I'm coming to update to the latest version of this rom, what's the procedure to follow?

Hi,
I'm trying to flash Jellybean 4.1.1 build #27 but it fails no matter what. I have followed the procedure, flashed the rom, erased cache, wiped data/factory reset, rebooted on recovery.
Here's what I get:
-- Install /sdcard/tg_endeavoru-ota-27.zip ...
Finding update package ...
Opening update package ...
Installing update ...
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru"
E:Error in /sdcard/tg_endeavoru-ota-27.zip
(Status 7)
* Verifying filesystem...
* Verifying partition sizes...
Error Flashing zip '/sdcard/tg_endeavoru-ota-27.zip'
Failed
Any idea what I could be doing wrong?
Thank you very much in advance for your help.

MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
I've got JB running on my phone but when I try to boot into recovery to install the apps it won't work. I get the red exclamation mark. I am coming from twrp2.2.0 I followed these instructions
Download the latest CM10 .zip file from here.
Download JB Google Apps from here.
Reboot into CWM or TWRP recovery.
Factory Data reset. (MUST DO THIS!)
Flash CM10 .zip file.
Reboot.
Reboot into recovery.
Flash JB Google apps.
Enjoy!
Any help would be great

jb 4.1.1 how screenshot??
hello All, this is my first quest in this forum. i'have flashed jb 4.1.1 in my device (one x) ad is all ok (wifi go in sleeping mode too fast but when it stand up go well) i need to make a lot of screenshot and i dont know how. Pls help
PS: i think this forum is very usefull for modding android, great work!!!)
Imerio
HavE fUn

MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
I love you and thank you. Simple, easy, quick instructions

[Completed] Can't install CM12 to Galazy S2 I9100P

I've downloaded the latest stable files and followed the instructions here to the letter:
http://forum.xda-developers.com/galaxy-s2/development-derivatives/rom-cyanogenmod-12-t2955551
But I cannot get CM12 to install. If I boot the phone using stock recovery I can see and select the CM12 zip file but I get the 'Signature verification failed' error. If I use CWM recovery where I can toggle signature verification on and off, it's like it can't even see my SD card. Even though it says that the current directory = /sdcard it isn't, and instead just shows everything on the device internal memory.
Can anybody help? I've been stuck with this for about 8 hours.

I've also tried installing TWRP recovery. This does at least see my SD card and let me choose the CM12 zip file, but when I press the 'FLASH NOW' button, it asks me if I'm sure I want to reboot to recovery and complete the specified actions then does absolutely nothing when I select 'OK'.

Having spent hours trying various different things, I've made some progress and can now at least get CWM to see my SD card and the CM12 zip file. Unfortunately the installation fails with an error 7. I've deleted all of the 'getprop' entries from the 'updater-script' but it's made no difference. Please can someone help?

Thanks to the overwhelming support and advice received on here I managed to get it working
I'm posting this in case anybody else happens to have the same problem and finds this thread. This is what worked for me:
1. Download and install Odin
2. Flash stock ROM
3. Flash rooted kernel (I used one with CWM pre-installed)
4. Update CWM to v 6
5. Perform factory reset
6. Wipe cache
7. Wipe Dalvik cache
8. Install CM12
9. Install Google apps

Hello,
Glad you found your way,
Thread closed!
-Vatsal