Before you start let me make it clear that, I don't own this device or don't have any connection with it. I put this thread only because my friend from Chandigarh, India requested me to do a guide on customizing this device. So, I collected information from members related to this device & from other forums.
The Roms listed here are not my works, so it may or may not work with your device. I tried my level best to make it as simple as it can.
ROOTING
First of all, you need to Root your device.
Use Universal Androot, you can download the software here
Use Root Explorer or any file management softwares to install.
Now download the Rom Manager and install it.
RECOVERY MENU
Next you need to Install the stock Recovery Menu.
The complete procedure as well as the required files can be downloaded here.
Just downloaded & extract the file and follow the steps.
CUSTOMIZED RECOVERY
This Recovery Menu can only install update.zip files.
So, it need to be modified to install any custom rom.
You can download the custom Recovery here
Extract the file, Use Android Download Tool provided in the package to install.
Select only the Recovery option and flash the device with it.
Now reboot into recovery you can see a new recovery menu with options to install any zip file.
CUSTOMIZE YOUR DEVICE
Currently only a few customized roms are available.
Customized CyanogenMod Rom
This Rom is tested several times and 100% working. You can download it here.
Download the rom and put it to your sdcard (Please don't extract it.)
Reboot to recovery either by Rom Manager or by Pressing & Holding both power key &Home button.
Select the option to Install zip file from sdcard, now select the option to disable signature verification.
Now select the downloaded zip file, the setup will start.
When the installation finishes, Reboot.
Now you can see your new Rom with added functions.
MIUI Rom for Micromax A60
MIUI is one of the most popular customized Rom for android. You can download it here.
The installation procedure is given below
1. Download Zip file(MIUI.us 1.8.5 Eng Deo ZipA Signed SuperKid.zip) place in your root of sd card.
2. Download Busybox installer from the market and update your busybox.
3. Go to ROM Manager & select "install Rom from SD Card" and choose the zip file from sd card (MIUI.us 1.8.5 Eng Deo ZipA Signed SuperKid.zip) .
4. Select all pre-installation requirements.
5. After you are done, don’t exit, Go to advanced and choose ‘Wipe Dalvik Cache’
6. Reboot your phone
Procedure to Move Apps to SD Card
This the most important part since the Micromax Andro A60 has only a limited memory.
To transfer to sdcard you need to have ext partition.
Creating ext partion
First backup all your SD Card data to your Computer.
If you followed the procedure explained above, just reboot into recovery and select Partition SD Card.
Now you can choose the required size of your secondary partition.
These is another way to achieve this. Please refer this Thread.
http://forum.xda-developers.com/showthread.php?t=883420
goto Recovery console
Reboot the device.
Install Apps to Your SD Card
I suggest to use Link2SD. This can be downloaded here
Please Remember, this not exactly installing apps on sd but making a symbolic link on the sd card to transfer data.
Also try the famous app2sd . You can download it here
There is some installation procedure. It is explained in the thread below. Try it if you are interested.
http://forum.xda-developers.com/showthread.php?t=833722
febycv said:
This Thread will provide you with complete guide to Customize your Micromax Andro A60
Please note that this thread is for the Beginners, not for the Experts. So take it in that way.
I tried my level best to make it as simple as it can.
If you find any part confusing, Please contact me. I will be at your service.
ROOTING
First of all, you need to Root your device.
Use Universal Androot, you can download the software here
Use Root Explorer or any file management softwares to install.
Now download the Rom Manager and install it.
RECOVERY MENU
Next you need to Install the stock Recovery Menu.
The complete procedure as well as the required files can be downloaded here.
Just downloaded & extract the file and follow the steps.
CUSTOMIZED RECOVERY
This Recovery Menu can only install update.zip files.
So, it need to be modified to install any custom rom.
You can download the custom Recovery here
Extract the file, Use Android Download Tool provided in the package to install.
Select only the Recovery option and flash the device with it.
Now reboot into recovery you can see a new recovery menu with options to install any zip file.
CUSTOMIZE YOUR DEVICE
Currently only a few customized roms are available.
Customized CyanogenMod Rom
This Rom is tested several times and 100% working. You can download it here.
Download the rom and put it to your sdcard (Please don't extract it.)
Reboot to recovery either by Rom Manager or by Pressing & Holding both power key &Home button.
Select the option to Install zip file from sdcard, now select the option to disable signature verification.
Now select the downloaded zip file, the setup will start.
When the installation finishes, Reboot.
Now you can see your new Rom with added functions.
MIUI Rom for Micromax A60
MIUI is one of the most popular customized Rom for android. You can download it here.
The installation procedure is given below
1. Download Zip file(MIUI.us 1.8.5 Eng Deo ZipA Signed SuperKid.zip) place in your root of sd card.
2. Download Busybox installer from the market and update your busybox.
3. Go to ROM Manager & select "install Rom from SD Card" and choose the zip file from sd card (MIUI.us 1.8.5 Eng Deo ZipA Signed SuperKid.zip) .
4. Select all pre-installation requirements.
5. After you are done, don’t exit, Go to advanced and choose ‘Wipe Dalvik Cache’
6. Reboot your phone
Procedure to Move Apps to SD Card
This the most important part since the Micromax Andro A60 has only a limited memory.
To transfer to sdcard you need to have ext partition.
Creating ext partion
First backup all your SD Card data to your Computer.
If you followed the procedure explained above, just reboot into recovery and select Partition SD Card.
Now you can choose the required size of your secondary partition.
These is another way to achieve this. Please refer this Thread.
http://forum.xda-developers.com/showthread.php?t=883420
goto Recovery console
Reboot the device.
Install Apps to Your SD Card
I suggest to use Link2SD. This can be downloaded here
Please Remember, this not exactly installing apps on sd but making a symbolic link on the sd card to transfer data.
Also try the famous app2sd . You can download it here
There is some installation procedure. It is explained in the thread below. Try it if you are interested.
http://forum.xda-developers.com/showthread.php?t=833722
Click to expand...
Click to collapse
@febycv- friend the cynanogen mod rom for a60 u hv talked about is the rom that you have created?
or
if it is from some other xda a60 forum then i want to tell you that this rom is not 100% tested and also just boots up but have no support for wireless connections and other hardware such as camera, sd ,etc,.....
so please tell whether it is original working cyanogen mod or modded eclair rom or the one that i hv talked about?
ya can u pls tell this rom working properly?
i think these roms are what amansingh is talking about.......
guys i hv earlier got the reply from febycv,
and according to him these are the roms created for our device earlier on previous posts that never worked or flashed properly and he have not created any of the rom by himself, he have just created this thread to post a flashing update procedure via recovery for as per requested by one of his friend using a60....
but still got a promise of help.....................long live A60
feby wrote this cause earlier i dont know how to install rom as i said him on fb.... he is ma frend........ and i live in chd......
febycv said:
Before you start let me make it clear that, I don't own this device or don't have any connection with it. I put this thread only because my friend from Chandigarh, India requested me to do a guide on customizing this device. So, I collected information from members related to this device & from other forums.
The Roms listed here are not my works, so it may or may not work with your device. I tried my level best to make it as simple as it can.
ROOTING
First of all, you need to Root your device.
Use Universal Androot, you can download the software here
Use Root Explorer or any file management softwares to install.
Now download the Rom Manager and install it.
RECOVERY MENU
Next you need to Install the stock Recovery Menu.
The complete procedure as well as the required files can be downloaded here.
Just downloaded & extract the file and follow the steps.
CUSTOMIZED RECOVERY
This Recovery Menu can only install update.zip files.
So, it need to be modified to install any custom rom.
You can download the custom Recovery here
Extract the file, Use Android Download Tool provided in the package to install.
Select only the Recovery option and flash the device with it.
Now reboot into recovery you can see a new recovery menu with options to install any zip file.
CUSTOMIZE YOUR DEVICE
Currently only a few customized roms are available.
Customized CyanogenMod Rom
This Rom is tested several times and 100% working. You can download it here.
Download the rom and put it to your sdcard (Please don't extract it.)
Reboot to recovery either by Rom Manager or by Pressing & Holding both power key &Home button.
Select the option to Install zip file from sdcard, now select the option to disable signature verification.
Now select the downloaded zip file, the setup will start.
When the installation finishes, Reboot.
Now you can see your new Rom with added functions.
MIUI Rom for Micromax A60
MIUI is one of the most popular customized Rom for android. You can download it here.
The installation procedure is given below
1. Download Zip file(MIUI.us 1.8.5 Eng Deo ZipA Signed SuperKid.zip) place in your root of sd card.
2. Download Busybox installer from the market and update your busybox.
3. Go to ROM Manager & select "install Rom from SD Card" and choose the zip file from sd card (MIUI.us 1.8.5 Eng Deo ZipA Signed SuperKid.zip) .
4. Select all pre-installation requirements.
5. After you are done, don’t exit, Go to advanced and choose ‘Wipe Dalvik Cache’
6. Reboot your phone
Procedure to Move Apps to SD Card
This the most important part since the Micromax Andro A60 has only a limited memory.
To transfer to sdcard you need to have ext partition.
Creating ext partion
First backup all your SD Card data to your Computer.
If you followed the procedure explained above, just reboot into recovery and select Partition SD Card.
Now you can choose the required size of your secondary partition.
These is another way to achieve this. Please refer this Thread.
http://forum.xda-developers.com/showthread.php?t=883420
goto Recovery console
Reboot the device.
Install Apps to Your SD Card
I suggest to use Link2SD. This can be downloaded here
Please Remember, this not exactly installing apps on sd but making a symbolic link on the sd card to transfer data.
Also try the famous app2sd . You can download it here
There is some installation procedure. It is explained in the thread below. Try it if you are interested.
http://forum.xda-developers.com/showthread.php?t=833722
Click to expand...
Click to collapse
feby can u port a rom also plz?
Thread Closed!
Use "Thanks" Button to respond
GUIDE TO FLASHING STOCK FIRMWARE FOR ATT AND ROGERS I727 SKYROCKET PHONES WITHOUT USING ODIN OR KIES
THIS METHOD APPLYS TO:
ONLY FOR PHONES THAT CAN BOOT INTO A CUSTOM RECOVERY CWM/TWRP
USERS WHO CANT USE ODIN AND/OR KIES FOR WHATEVER REASON
PHONES WITH A BAD USB PORT
HAVE USB CONNECTIVITY ISSUES
MAC USERS WITH A CUSTOM RECOVERY ALREADY INSTALLED.
YOU ARE ON A CUSTOM ROM WITH USB PROBLEMS AND NEED TO RETURN TO STOCK FOR WARRANTY REPAIRS
NOTE: USING THIS GUIDE TO RETURN TO STOCK WILL PERMANENTLY UNROOT THE PHONE, BUT CAN BE REROOTED AFTER IF NEEDED.
Disclaimer: I am not responsible for your devices, follow guide at your own risk!
READ THE WHOLE POST
HOW TO ENTER INTO RECOVERY MODE, INSTRUCTIONS HERE STEP #4
GUIDE PRESUMES YOU ALREADY KNOW HOW TO INSTALL/FLASH FILES FROM RECOVERY
YOU NEED TO HAVE ONE OF THE RECOMMENDED CUSTOM RECOVERIES ALREADY INSTALLED ON THE PHONE SUCH AS CWM OR TWRP, LINKS IN THE DOWNLOAD SECTION BELOW
IN THIS GUIDE YOU WILL BE INSTALLING THE STOCK FIRMWARE ZIP FILE
OPTIONAL: INSTALLING THE STOCK RECOVERY ZIP FILE ONLY IF YOU NEED TO RETURN FOR WARRANTY, OTHERWISE NOT RECOMMENDED TO INSTALL
GETTING THE STOCK FIRMWARE TO YOUR PHONE
OPTION 1: IF YOUR ABLE TO BOOT INTO ANY ROM:
YOU HAVE A WORKING USB CONNECTION:
Download the files and transfer the files from your computer to your internal or external sdcard
YOU DONT HAVE A WORKING USB CONNECTION: USE EITHER METHOD "A" OR "B" OR "C":
METHOD A: From the phone use xda app or browser and navigate to this page and download the files directly to your device from the links provided below, then move them to the root of your internal or external sdcard, it will make it easier to find.
METHOD B: Use airdroid wirelwss appor kies air to transfer your files from your computer to your phone through your wifi connection and place them in the root of your internal or external sdcard
METHOD C: use an external sdcard reader/writer or another phone that has a micro sdcard slot and transfer files from your computer to the root of the external sdcard, then insert the sdcard back into the phone.
OPTION 2: YOUR NOT ABLE TO BOOT BUT CAN GET INTO A CUSTOM RECOVERY: USE EITHER METHOD "A" OR "B":
METHOD A: If usb port works: enable usb mount in custom recovery and transfer files to the root of your sdcard
METHOD B: If usb port doesnt work: use an external sdcard reader/writer or another phone that has a micro sdcard slot and transfer files from your computer to the root of the external sdcard, then insert the sdcard back into the phone.
FLASHING THE FILES
FIRMWARE
ENTER INTO RECOVERY MODE
PERFORM A RESET AND WIPE BOTH CACHES
INSTALL THE STOCK FIRMWARE ZIP FILE
ONLY INSTALL THE STOCK FIRMWARE(NOT THE STOCK RECOVERY ZIP FILE) THEN REBOOT THE PHONE INTO ANDROID TO CHECK IF IT BOOTS PROPERLY
YOUR GOOD LIKE THIS IF YOU JUST WANTED STOCK BACK ON YOUR PHONE
STOCK RECOVERY: ONLY RECOMMENDED IF RETURNING FOR WARRANTY REPAIR AND NEED TO SHOW FULL STOCK
TO GET THE STOCK RECOVERY ZIP FILE ONTO THE SDCARD FOLLOW THE INSTRUCTIONS FOR THE FIRMWARE GUIDE ABOVE
ENTER INTO RECOVERY MODE
INSTALL THE STOCK RECOVERY ZIP FILE, ONCE YOU DO THIS YOU WILL LOSE THE CUSTOM RECOVERY
IF YOU CANT USE ODIN THERE IS NO WAY TO REINSTALL A CUSTOM RECOVERY ON THE SKYROCKET ONCE THE STOCK RECOVERY HAS BEEN INSTALLED.
REBOOT PHONE INTO RECOVERY TO SEE IF THE STOCK RECOVERY FLASHED PROPERLY.
DOWNLOADS
MOVED TO THE 1STOP STICKY
USE CWM/TWRP FLASHABLE FIRMWARES
This really work. Can you write one for unlocking also?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
chasama said:
This really work. Can you write one for unlocking also?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
you have to buy unlock code, and you have to be on stock when entering code, read this http://forum.xda-developers.com/showpost.php?p=28439204&postcount=10
Samsugn galaxy s2 GT-I9100 help!!
vincom said:
you have to buy unlock code, and you have to be on stock when entering code, read this http://forum.xda-developers.com/showpost.php?p=28439204&postcount=10
Click to expand...
Click to collapse
i am running on RR Jelly bean rom 3.0.6, suddenly my comp stopped detecting my phone nd now its not detected by any comp!!
wen i connect it only charges but the phone is not recognised!! i want to install stock ics firmware plz help me!
Hey thanks for the comprehensive list. One question. I can't boot, but I can access recovery. I can access USB, however, I don't have an external sd card. What are my options, besides buying one.
zgibbyson said:
Hey thanks for the comprehensive list. One question. I can't boot, but I can access recovery. I can access USB, however, I don't have an external sd card. What are my options, besides buying one.
Click to expand...
Click to collapse
use internal if you have usb access to it
thanks
the SD card from my other phone has some folders:.android secure, data; LOST.DIR; DCIM; LGsys.....which folder should I put TWRP2.2.0 & stock firmware in ? which folder is considered A ROOT of the external SD card ? so I can boot the device.I couldn't boot it. I am newbi. please help. Thankss.
Re: [HOWTO] INSTALL STOCK ICS USING CWM/TWRP even w/a DEAD USB Port
PhoneTay11 said:
the SD card from my other phone has some folders:.android secure, data; LOST.DIR; DCIM; LGsys.....which folder should I put TWRP2.2.0 & stock firmware in ? which folder is considered A ROOT of the external SD card ? so I can boot the device.I couldn't boot it. I am newbi. please help. Thankss.
Click to expand...
Click to collapse
Don't put it in any folder, just copy to the SD card.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
I did copy TWRP2.2.0 and stock firmware zip in SD card and hold volume up+down + power button to get recovery mode but I only see pictures of phone & monitor with yellow
triangle at center.( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again.)
---------- Post added at 06:31 AM ---------- Previous post was at 06:23 AM ----------
I upgraded my samsung s2 version 2.3.6 to 4.0.4 through the Kies. Then I tried to install TWRP 2.2.0 and Odin 1.85. I saw COM 14 ; COM 17 when I hit start button .It said
FAILED. Now it showed a yellow triangle in the middle of phone & monitor pictures. ( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again). Please help . Thank you very much.
I just tried other laptop . I saw COM 3 but it said it couldn't open the serial (COM )port . All thread completed (success 0/ failed 1)
PhoneTay11 said:
I did copy TWRP2.2.0 and stock firmware zip in SD card and hold volume up+down + power button to get recovery mode but I only see pictures of phone & monitor with yellow
triangle at center.( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again.)
---------- Post added at 06:31 AM ---------- Previous post was at 06:23 AM ----------
I upgraded my samsung s2 version 2.3.6 to 4.0.4 through the Kies. Then I tried to install TWRP 2.2.0 and Odin 1.85. I saw COM 14 ; COM 17 when I hit start button .It said
FAILED. Now it showed a yellow triangle in the middle of phone & monitor pictures. ( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again). Please help . Thank you very much.
I just tried other laptop . I saw COM 3 but it said it couldn't open the serial (COM )port . All thread completed (success 0/ failed 1)
Click to expand...
Click to collapse
that screen is also odin/download mode
try flashing again
check odin troubleshooting section in the "install cwm/twrp" link in my sig
vincom said:
GUIDE TO FLASHING STOCK FIRMWARE FOR ATT AND ROGERS I727 SKYROCKET PHONES WITHOUT USING ODIN OR KIES
THIS METHOD APPLYS TO:
PHONES THAT CAN BOOT INTO A CUSTOM RECOVERY CWM/TWRP
USERS WHO CANT USE ODIN AND/OR KIES FOR WHATEVER REASON
PHONES WITH A BAD USB PORT
HAVE USB CONNECTIVITY ISSUES
MAC USERS WITH A CUSTOM RECOVERY ALREADY INSTALLED.
YOU ARE ON A CUSTOM ROM WITH USB PROBLEMS AND NEED TO RETURN TO STOCK FOR WARRANTY REPAIRS
NOTE: USING THIS GUIDE TO RETURN TO STOCK WILL PERMANENTLY UNROOT THE PHONE, BUT CAN BE REROOTED AFTER IF NEEDED.
Disclaimer: I am not responsible for your devices, follow guide at your own risk!
READ THE WHOLE POST
HOW TO ENTER INTO RECOVERY MODE, INSTRUCTIONS HERE STEP #4
GUIDE PRESUMES YOU ALREADY KNOW HOW TO INSTALL/FLASH FILES FROM RECOVERY
YOU NEED TO HAVE ONE OF THE RECOMMENDED CUSTOM RECOVERIES ALREADY INSTALLED ON THE PHONE SUCH AS CWM OR TWRP, LINKS IN THE DOWNLOAD SECTION BELOW
IN THIS GUIDE YOU WILL BE INSTALLING THE STOCK FIRMWARE ZIP FILE
OPTIONAL: INSTALLING THE STOCK RECOVERY ZIP FILE ONLY IF YOU NEED TO RETURN FOR WARRANTY, OTHERWISE NOT RECOMMENDED TO INSTALL
GETTING THE STOCK FIRMWARE TO YOUR PHONE
OPTION 1: IF YOUR ABLE TO BOOT INTO ANY ROM:
YOU HAVE A WORKING USB CONNECTION:
Download the files and transfer the files from your computer to your internal or external sdcard
YOU DONT HAVE A WORKING USB CONNECTION: USE EITHER METHOD "A" OR "B" OR "C":
METHOD A: From the phone use xda app or browser and navigate to this page and download the files directly to your device from the links provided below, then move them to the root of your internal or external sdcard, it will make it easier to find.
METHOD B: Use airdroid wirelwss appor kies air to transfer your files from your computer to your phone through your wifi connection and place them in the root of your internal or external sdcard
METHOD C: use an external sdcard reader/writer or another phone that has a micro sdcard slot and transfer files from your computer to the root of the external sdcard, then insert the sdcard back into the phone.
OPTION 2: YOUR NOT ABLE TO BOOT BUT CAN GET INTO A CUSTOM RECOVERY: USE EITHER METHOD "A" OR "B":
METHOD A: If usb port works: enable usb mount in custom recovery and transfer files to the root of your sdcard
METHOD B: If usb port doesnt work: use an external sdcard reader/writer or another phone that has a micro sdcard slot and transfer files from your computer to the root of the external sdcard, then insert the sdcard back into the phone.
FLASHING THE FILES
FIRMWARE
ENTER INTO RECOVERY MODE
PERFORM A RESET AND WIPE BOTH CACHES
INSTALL THE STOCK FIRMWARE ZIP FILE
ONLY INSTALL THE STOCK FIRMWARE(NOT THE STOCK RECOVERY ZIP FILE) THEN REBOOT THE PHONE INTO ANDROID TO CHECK IF IT BOOTS PROPERLY
YOUR GOOD LIKE THIS IF YOU JUST WANTED STOCK BACK ON YOUR PHONE
STOCK RECOVERY: ONLY RECOMMENDED IF RETURNING FOR WARRANTY REPAIR AND NEED TO SHOW FULL STOCK
TO GET THE STOCK RECOVERY ZIP FILE ONTO THE SDCARD FOLLOW THE INSTRUCTIONS FOR THE FIRMWARE GUIDE ABOVE
ENTER INTO RECOVERY MODE
INSTALL THE STOCK RECOVERY ZIP FILE, ONCE YOU DO THIS YOU WILL LOSE THE CUSTOM RECOVERY
IF YOU CANT USE ODIN THERE IS NO WAY TO REINSTALL A CUSTOM RECOVERY ON THE SKYROCKET ONCE THE STOCK RECOVERY HAS BEEN INSTALLED.
REBOOT PHONE INTO RECOVERY TO SEE IF THE STOCK RECOVERY FLASHED PROPERLY.
DOWNLOADS
MOVED TO THE 1STOP STICKY
USE CWM/TWRP FLASHABLE FIRMWARES
Click to expand...
Click to collapse
Do you have the Stock ROM for GB 2.3.6 (SkyRocket) which i can flash using TWRP? My PC doesn't recognize my Skyrocket. The only way for me is to flash using TWRP but I can't find the GB ROM for it. There's a lot of ROM of GB but it is for ODIN (with extension .tar.md5) instead.
ntd0626 said:
Do you have the Stock ROM for GB 2.3.6 (SkyRocket) which i can flash using TWRP? My PC doesn't recognize my Skyrocket. The only way for me is to flash using TWRP but I can't find the GB ROM for it. There's a lot of ROM of GB but it is for ODIN (with extension .tar.md5) instead.
Click to expand...
Click to collapse
no, why do u need gb, just flash the ics or jb roms, or if your usb is not dead go through the odin trouble shooting section in the restore to stock sticky to try to solve the connection issue, link to restore to stock is in my sig
Stock Rom Android M.
Hi, could you help me i have TWRP Custom recovery and cm12.1 android lollipop, i want to
Flash Stock Rom Android Marshmallow using TWRP is it possible using this method ,
my Device is Galaxy Tab S 8.4 wi-fi.
invalid zip
I am a mac user without access to a PC (no odin). I have TWRP recovery installed. I used android file transfer to move the stock firmware zip in the download section to the internal SD (root folder). I wiped the system and cache, then install zip - but it fails every time with "invalid zip file format". I have tried a half dozen other versions of the stock ROM from various sources and they all fail with the same error. ZIP signature verification is disabled. Just when I thought that i was doing something completely dumb and not flashing correctly at all - I tried re-flashing the lineageOS ROM i have and that worked fine. I've read a bit about unpacking and re-zipping these zips to get them to work, but that requires 7zip (which I don't have on mac). Help! am I doing something dumb or do I not have the correct zip files? I really need to get back to stock so I can activate my cellular service.
champagne_problems said:
I am a mac user without access to a PC (no odin). I have TWRP recovery installed. I used android file transfer to move the stock firmware zip in the download section to the internal SD (root folder). I wiped the system and cache, then install zip - but it fails every time with "invalid zip file format". I have tried a half dozen other versions of the stock ROM from various sources and they all fail with the same error. ZIP signature verification is disabled. Just when I thought that i was doing something completely dumb and not flashing correctly at all - I tried re-flashing the lineageOS ROM i have and that worked fine. I've read a bit about unpacking and re-zipping these zips to get them to work, but that requires 7zip (which I don't have on mac). Help! am I doing something dumb or do I not have the correct zip files? I really need to get back to stock so I can activate my cellular service.
Click to expand...
Click to collapse
AFAIK all devhosts files are bad/fake, i cant even dl my own files.
if i find them all reup to androidfilehost
Stock Rom
champagne_problems said:
I am a mac user without access to a PC (no odin). I have TWRP recovery installed. I used android file transfer to move the stock firmware zip in the download section to the internal SD (root folder). I wiped the system and cache, then install zip - but it fails every time with "invalid zip file format". I have tried a half dozen other versions of the stock ROM from various sources and they all fail with the same error. ZIP signature verification is disabled. Just when I thought that i was doing something completely dumb and not flashing correctly at all - I tried re-flashing the lineageOS ROM i have and that worked fine. I've read a bit about unpacking and re-zipping these zips to get them to work, but that requires 7zip (which I don't have on mac). Help! am I doing something dumb or do I not have the correct zip files? I really need to get back to stock so I can activate my cellular service.
Click to expand...
Click to collapse
Just use "Flashfire" and do everything from your phone no need for a computer.
Using this to flash 1.7 gb file
I have a moto g5s plus (sanders) and have installed unofficial lineage 15.0 build. before installation , I didn't took backup in TWRP. Now i am downloading stock firmware zip file. can that be installed using TWRP?
ParaSpl01t said:
I have a moto g5s plus (sanders) and have installed unofficial lineage 15.0 build. before installation , I didn't took backup in TWRP. Now i am downloading stock firmware zip file. can that be installed using TWRP?
Click to expand...
Click to collapse
you mean this zip file when you unzip it show you 5 files that you can use with Odin?
I tried and says fail , why would tarp fail to flash a stock firm ?
Hi all!
I just bought my P780 from china retailer. Turns out the stock ROM doesn't support GSM lower than 2100 MHz. I've rooted my phone, so I'd like to know is the any CWM 6 recovery and how to flash it to the phone?
And is there any link to download another country's ROM so I can use my SIM?
Thanks and best regards.
CWM means clockworkmod recovery.
it does not need to be flashed
to get it,
1)get cwm zip file for your device.(use google)
2)then put that file in root directory of your sdcard
3) boot your phone in recovery mode and select cwm zip file.
then it would start cwm recovery
---------- Post added at 05:05 PM ---------- Previous post was at 05:01 PM ----------
i think there is no rom for making your sim card usable
please hit THANKS....
I managed to install CWM English using MobileUncle. Is there any ROM I can install via CWM, because the ones n needrom seems to be very difficult.
yes there are many roms available
can u tell me how to use the flashtool from the beginning since it is my first time
it is recommended to take a nandroid backup before this flashing
ok if you need to flash rom from cwm than follow steps :
1) boot in recovery mode
2) wipe data
3) select apply update from sdcard and then select CWM file.
4) after CWM opens select your rom zip file
5) now flashing of new rom will start.
6) wipe data/factory reset in recovery mode only.
7) now reboot your phone.....
rom file is a zip file which can be obtained by searching on google.
***download rom file which is only applicable for your phone*
othervise your phone will brick***
this guide is applicable to all android phones......
Sent from my GT-S5302
Bhaumik Patel said:
it is recommended to take a nandroid backup before this flashing
ok if you need to flash rom from cwm than follow steps :
1) boot in recovery mode
2) wipe data
3) select apply update from sdcard and then select CWM file.
4) after CWM opens select your rom zip file
5) now flashing of new rom will start.
6) wipe data/factory reset in recovery mode only.
7) now reboot your phone.....
rom file is a zip file which can be obtained by searching on google.
***download rom file which is only applicable for your phone*
othervise your phone will brick***
this guide is applicable to all android phones......
Sent from my GT-S5302
Click to expand...
Click to collapse
You need to do much for flashing a custom rom..
You need to do a full wipe before flashing a rom not just data.
and you don't need to wipe data/factory reset since flashing a Custom rom will automatically wipe all data.
Also on some phones mostly HTC phones you need to Flash Boot.img manually when S-ON.
oh ok......
Sent from my GT-S5302
First of All things You need..
1. Rooted Micromax Unite 2 which would be rooted with Kingroot ( How to root Micromax Unite 2 without Pc) http://forum.xda-developers.com/showthread.php?t=2896139
2. Recovery Flashing Tool from here http://www.4shared.com/mobile/pYEw2FSXce/Recovery-Tools.html
3. Desired Cutom Recovery You Want.. Download it from here http://forum.xda-developers.com/android/general/micromax-unite-2-custom-recoveries-t2809372
4. Take backup of stock recovery
Procedure:-
First of all open the Recovery tools appand slide ur finger from Right side and you will see a option Backup Recovery .. Click that and backup your stock Recovery..
1)At first Download Your Favourite recovery
and move to the root of your SD CARD.
2)Install the Recovery Tool.apk,from the above link.
3)Now Open recovery tool.
4)now click on Flash Recovery and choose appropriate recovery.
5)for other recoveries,click on flash Other Recoveries,and choose from sd card.
6.now reboot.
Pls if I helped u Hit the Thanks Button... :thumbup:
Getting short of memory with 1Gb internal Memory only? even tried 2.73Gb mod available but then you still run out of space as you can not move apps to the SD card?
Every time you need to flash a new ROM you need to revert back to the original storage by flashing and restoring... lengthy process.. here i put up a solution for all of you guys using the device or any of its clone. i have Qmobile A700 and tested this on Walton Primo N1 as well...:angel:
Do it ONCE and keeps same storage FOREVER. no matter how many ROM's you change or Flash via custom recovery.
Point to Note here is if you flash this method your current ROM will remain installed, only changes that will incur are Logo shall be replaced, partitions shall be modified and recovery will b replaced with twrp. If you need to keep current logo and recovery then replace the logo.bin and recovery.img with the ones you need to keep in the folder files_to_flashtool you can go to any ROM you want after this. Even when you are flashing a new ROM you don't need any zip to change storage, like it used to be with 2.73Gb Mod. just flash the ROM and you will have 2.49Gb Internal Storage in any rom. But Please take Backup of your Phone just in case anything goes wrong. i shall not be responsible for anything bad happening to your phone if you don't follow the method PROPERLY.
Method and Instructions.
1. Download the files from the Link given at the end.
2. Unzip the folder Tools.zip.
3. Unzip the Drivers Folder.
4. Install Drivers on your PC install ADB and fastboot drivers and device drivers as well.
5. Now Unzip SP Flash Tool 3.1352.01 (5.1352.01).rar and Files_to_FlashTool.zip
6. Turn off phone.
7. Pull out the battery
8. Run sp flash tool.
9. Load scatter file(MT6589_Android_scatter_emmc_PMT.txt) in the files_to_flastool folder. All items will b auto selected.
10. Click download
11. Put battery in the phone and connect cable.
12. The progress bar in sp flash tool will start and a green circle will pop up when done.:highfive:
After process is complete, disconnect the phone from the PC and reboot. Enjoy you have 2.49Gb internal Storage now.
and you will have twrp recovery installed as well after flashing just putting here so that if u want to take backup of current recovery or not.
Downloads
Tools.zip
Files To FlashTool
Credits
Mohammad Ali, Rasel Shiplu for helping and testing this out with me. and Piyush Tilva for Porting Android L Rom for our Devices. Salutes to you all
video tutorial how to flash and the Work Around for if you get stuck on boot logo
Here is the video tutorial how to do it
http://nibs.tinytake.com/sf/OTcwMDFfNjUxODgy
Please note you may require a work around to get it working if you are on stock ROM. so please please keep backup of your ROM before following this method. i shall not be responsible for any loss of Data or damage to your device. …
After the process was finished i rebooted my phone on the stock ROM, it did not boot. so i figured out a workaround for stock ROM users, after the flash is complete when you are on stock ROM (or even any other custom ROM) and phone does not go beyond boot logo, reboot to recovery and restore your TWRP backup.... after the process is complete reboot and enjoy 2.49Gb internal storage or you can also flash this and then install any custom ROM over it. and still you will have 2.49 mod. and it will remain the same untill you restore stock ROM using SP Flash Tools.
Thanks and Enjoy :good::laugh:
Dont forget to hit thanks if i helped you.