How to Flash Custom Recovery after Rooting Micromax Unite 2 without PC - Micromax A106 Unite 2

First of All things You need..
1. Rooted Micromax Unite 2 which would be rooted with Kingroot ( How to root Micromax Unite 2 without Pc) http://forum.xda-developers.com/showthread.php?t=2896139
2. Recovery Flashing Tool from here http://www.4shared.com/mobile/pYEw2FSXce/Recovery-Tools.html
3. Desired Cutom Recovery You Want.. Download it from here http://forum.xda-developers.com/android/general/micromax-unite-2-custom-recoveries-t2809372
4. Take backup of stock recovery
Procedure:-
First of all open the Recovery tools appand slide ur finger from Right side and you will see a option Backup Recovery .. Click that and backup your stock Recovery..
1)At first Download Your Favourite recovery
and move to the root of your SD CARD.
2)Install the Recovery Tool.apk,from the above link.
3)Now Open recovery tool.
4)now click on Flash Recovery and choose appropriate recovery.
5)for other recoveries,click on flash Other Recoveries,and choose from sd card.
6.now reboot.
Pls if I helped u Hit the Thanks Button... :thumbup:

Related

[ROOT] Micromax A45 Punk with CWM Recovery

Root Your Micromax A45 with CWM Recovery
Required Files To Root Your Punk
CWM 6 Recovery For MMX A45 Check My Thread
http://forum.xda-developers.com/showthread.php?t=1987353
Download ROOTA45.zip From Attachment
NOTE: CWM Recovery only need to flash zip file
NOTE: CWM Recovery only need to flash zip file
NOTE: CWM Recovery only need to flash zip file
Try if CWM based the recovery, you must be off the phone once you press Volume up + Volume down and power button (do not Let go) may appear to be choices you press Just up button to enter recovery.
First make backup with CWM Recovery
How to Backup on CWM Recovery
1) Enter CWM recovery (you know how to enter)
2) Select backup and restore >>backup
3) Wait after (Make sure that there's more to 500mb plus space on the SDcard)
Now,
How to Root Micromax A45 Punk With CWM
1) Enter CWM recovery (you know how to enter)
2) Select install zip from sdcard >> choose
zip from sdcard >> select RootA45.zip from your sdcard
3) Select Reboot system now >> now check you superuser install in your punk or download root checker from play store
Credit Goes Only Me To Root MMX A45 With CWM Recovery
Note:- I am not responsible for any problem
hit thanks button for me.....!
Good Work........... :good:
But where gone that rooted boot.img...... without it.... rooting is not possible...... may b :laugh:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My work
Make YoUR oWN App
Sing Your App Easily
Red-Ics Theme For A60
Darky Buky Theme For Android
X-zoom V2 Transparent Custom Rom For MMx A60
Happy Developing :fingers-crossed:
.......
aguha1044 said:
Good Work........... :good:
But where gone that rooted boot.img...... without it.... rooting is not possible...... may b :laugh:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My work
Make YoUR oWN App
Sing Your App Easily
Red-Ics Theme For A60
Darky Buky Theme For Android
X-zoom V2 Transparent Custom Rom For MMx A60
Happy Developing :fingers-crossed:
Click to expand...
Click to collapse
its possible with my method only
Higher kernel for a45???????????
not now.....
hatova said:
Hi
gher kernel for a45???????????
Click to expand...
Click to collapse
not yet............

Upgrade canvas 2 to jellybean

THERE ARE MANY WAYS TO UPGRADE UR CANVAS 2 TO JELLYBEAN.SO TODAY I AM DISCUSSING ALL THE METHODS IN THIS SINGLE POST.
THE FIRST METHOD....
the first way that is most often searched is to upgrade canvas 2 to official unrooted jellybean that is realeased by micromax.
I had already made a complete tutorial of this in my pevious thread. So if u want to upgrade to stock unrooted jellybean rom (i.e. v3) go the this link-
Link: http://forum.xda-developers.com/showthread.php?t=2368391
U CAN ALSO FLASH SUVI ROM V9 AS IT IS SP FLASH TOOLS FLASHABLE.ITS PROCEDURE OF FLASHING IS DAMN SAME AS MENTIONED IN ABOVE THREAD.
FLASHING SUVI ROM V9 METHOD CAN ALSO BE USED IF U ARE GETTING ANY KINDA ERROR IN ROOTING UR FONE OR PORTING CWM LIKE BROM ERROR:S_DA_SOC_CHECK_FAIL(3013) AS THIS ROM IS PRE ROOTED.
SECOND METHOD.......
The second method is to upgrade already rooted canvas 2 to rooted jellybean roms.
1.first of all download the stock jellybean zip file and place it in the root of ur fone's sd card i.e. outside any folder(just for sake of convinience).
LINK:
d-h.st/jGx
THIS IS A PRE ROOTED BUT SAME AS OFFICIAL JELLYBEAN ROM
2.boot into recovery by holding vol up+ vol down +power buttons simultaneously.
3.now wipe data/factory reset and also wipe cache partition.
4.go to advanced and wipe delvic cache.
5.now go back and select install zip from sd card and then choose zip from sd card.
6.locate the zip file and select it.let the installation complete.
7.go back and select reboot fone now.
WITH THIS U HAVE SUCCESSFULLY UPGRADED UR CANVAS 2 TO JELLYBEAN.
THERE ARE ALSO MANY OTHER JELLYBEAN ROMS FOR CANVAS 2. i am listing a few here.
1.jmp rom-LINK:
goo.im/devs/jigarmpattani/Micromax_A110/JMP_Jelly%20Bean/JMPv11.5_JB-4.1.1_25-May-2013.zip
2.suvi rom-link:
d-h.st/Imy
3.raven rom-link:
https://docs.google.com/file/d/0ByHiJVjjrE83ZnVRZDBFZ0pJQnM
4.lewa os-link:
d-h.st/y9T
5.dr bhokhali rom-link:
d-h.st/mg2
AND MANY MORE..
VERYY IMPORTANT- PLEASE MAKE SURE THAT U HAVE A FILE NAMED BOOT.IMG IN UR ZIP FILE OF DOWNLOADED ROM.
IF U CANNOT BOOT.IMG FILE IN UR ROM THAN *DO NOT* DIRECTLY FLASH IT. FIRST FOLLOW THESE STEPS.
1.download boot.img file from below link
link:d-h.st/sgS
2.now extract ur rom'zip file using winrar or 7zip to any specified folder.
3.paste the above downloaded boot.img file in that folder and then zip it again using winrar or 7zip.
PLEASE MAKE SURE THAT U *ZIP* ALL THE FILES OF THE EXTRACTED FOLDER AND NOT THE FOLDER ILSELF.
IF U DONT PLACE BOOT.IMG IN UR ROM THAN U WILL SIMPLY BE STUCK AT BOOT LOGO.
WELL WITH ALL THIS *MESS* U WILL BE ABLE TO UPGRADE UR CANVAS 2 TO JELLYBEAN.
hit thx:thumbup: if i helped...

[Q] How to fix cwm recovery upside down view in mmx uinte 2 A106 ?

I flashed cwm recovery with rashr app on my unite 2. But when I entered in recovery mode, it showed upside down. Plz guide me. How to fix this..???
Looks like a weird problem. Don't use any app to flash CWM but if you have problem with using adb try ROM Manager By JRummy(available on Google Play, root needed) or if you want to flash by the custom recovery download the required custom recovery file from the internet(try using TWRP instead of CWM as there may be problem in CWM) . Download the file and locate it to the SD card and rename it update.zip.Go to the recovery mode and select update from zip navigate to the update.zip and select it.
Voila:thumbup::thumbup:

How to install recovery [Canvas A104]

Hey Xda brothers
..................................................................................................................................................................................................
This step by step guide will let you install recovery on your Canvas A104 {Fire 2}
There are lots of method for installing a recovery but it is the easiest one.
You can install all available recoveries for canvas A104 with this method.
A custom recovery allows you to flash custom roms ,files etc...
Requirements:
1. A rooted phone.
2. A Custom recovery
Link for all recoveries
https://drive.google.com/folderview...hnQzJUM3ItbnRSZXFqN3BqQm16czY2ejA&usp=sharing
3. Rashr and ES file explorer. {You can also use Flashify ]
Steps:
1. First of all download a recovery and paste it anywhere on your SD card.
2. Open the ES file explorer and extract the recovery.img from the downloaded zip file.
3. Now install Rashr and grant Root access.
4. You will see an option in the list saying
" Recovery from storage "
5. Click on that.
5. Now browse to the extracted recovery.img and click on yes please.
6. After that click on yes please again.
7. The recovery will be flashed and you will be booted into recovery mode.
8. WHoa!

[RECOVERY][PHILZ] For Micromax Canvas Hue AQ5000

Here's The Philz Recovery For Micromax Canvas Hue
**
Link : https://drive.google.com/file/d/0B26n8RqNEwTXd3N5ajhGY19MUkE/view?usp=drivesdk
**
How To Flash :
1. If You Already In Custom Recovery Flash The Zip Directly Through Your Recovery
2. If You Haven't Installed Custom Recovery You Need To Root Your Phone To Install It..
3. Root Your Phone Using Kingroot Apk, Reboot, Download The Zip And Extract It, You'll Find Recovery.img, Place It On SD, Download Mobile Uncle Tools Install It, Open, Give It Root Permission, Go To Recovery Update, Select Recovery.img, Select Yes For The Following Menu.. That's It..
**
"Don't Forget To Hit Thanks"

Categories

Resources