Database Info

Get your own CWM recovery for newer devices and dont beg anywhere - 2 simple steps

Those who struggle to get CWM recovery for thier newer devices and who are facing problem on romdump your stock rom to get stock recovery.img here you have 2 simple steps to get your CWM recovery for your new device
Step -1
Creating A Dump\Backup
Note: Root Required
1. Set "Settings" -> "Display" -> "Sleep" -> "10 minutes"
2. Install or update "Busybox" from play store
3. Set your phone to "Airplane" mode
4. Make sure that the card is not less than 2Gb of free space
5. Use any one of the following:
BakupTool_sdcard.zip saves a backup copy on the path: /mnt/sdcard/backup_v2
BakupTool_sdcard2.zip saves a backup copy on the path: /mnt/sdcard2/backup_v2
6. Extract the BakupTool_* to sdcard. Full path to the file should be: / sdcard / gscript
7. Install program: /sdcard /gscript /"GScriptLite.apk"
8. Open the program "GScriptLite". Press "Menu button" -> "Add Script"
9. Set tick "Needs SU"
10. Click "Load file" and select "back_mt657x.sh"
11. Click the button "Save"
12. Tap on a new script, "back_mt657x.sh". After that give the program root permissions if asked and wait for 5- 10 minutes. Do not use the phone during the process.
A sign of a normal shutdown of the script is:
Message in the terminal:
100% Backup Complite!!!
Saved to / sdcard/backup_v2/GGGGMMDD-ChChmm
Star Time: hh: mm: ss; End Time: hh: mm: ss
The appearance at the root of SD-card phone the following structure of folders and files:
backup_v2
YYYYMMDD-hhmm
* BDRS-YYYYMMDD-hhmm
boot.img
cache.ext4.tar
data.ext4.tar
nandroid.md5
recovery.img
system.ext4.tar
* misk
cache.img
cmdline.info
config.info
cpu.info
nvram.img
nvram.tar
ram.info
rom.info
* over
expdb.raw
full_preloader_part.raw
misc.raw
pmt.raw
sec_ro.raw
seccfg.raw
unknown.raw
boot.img
dsp_bl.img
ebr1.img
firmware.info
MT6577_a4_v2c.info
logo.img
mbr.img
preloader.img
recovery.img
system.img
uboot.img
data.img
step - 2
upload your stock recovery.img to get cwm recovery
kaushik Dutta has developed a clockworkmod recovery builder on the official site....
http://builder.clockworkmod.com/
so upload your stock recovery.img and get exact cwm recovery.img of ur device....and flash it.
if yours is a new devicw please select new device column.
thanks for this awesome build.
- after u upload your stock recovery.img on clicking fro new device just click on Build icon on the last of the page.....
- then u will be qued and u will gwt build number please save it for further refference...
- click proceed to that server and find ur build number,,,if it finished successfully u will see green icon on the left
- then click on your build number then click status there u will get something like this
Project recovery
Last Successful Artifacts
android_device_lge_cayman.zip 5.12 MB
inputrecovery.img 16.00 MB
manifest.xml 53.95 KB
recovery.img 6.92 MB
finally download recovery.img which is ur cwm recovery and flash it via Mobileuncle MTK tools which can be downloaded from playstore
If something goes wrong u can revert back ur rom or stock recovery itself by flashing ur stock recovery.img from the back up folder...or u can flash ur rom back using SP FLASH tools
IF i helped u please press thanks :victory::victory::victory:

anybody tried???
meanwhile how to extract stock recovery.img from stock ICS

I did test it. The image build does boot for me. But the build recovery i got this way did miss some *.ko files my device needed
The site is not new by the way..
Read here how to dump you're recovery...
http://forum.xda-developers.com/showthread.php?t=1935162

Re: clockworkmod for newer devices - now get CWM recovery for every android
[email protected] said:
I did test it. The image build does boot for me. But the build recovery i got this way did miss some *.ko files my device needed
The site is not new by the way..
Read here how to dump you're recovery...
http://forum.xda-developers.com/showthread.php?t=1935162
Click to expand...
Click to collapse
Dumping rom is bit confusing....because I'm a dentist...
Can u please explain in simple steps to get stock recovery.img
I'm having intex aqua flash which is new in the market but it has all the feature of high devices...
One more thing can I do this in windows? Or should I need linux?
Sent from my Aqua flash using xda premium

Trying this right now. Hope the recovery.img from a stock nandroid works.

Re: clockworkmod for newer devices - now get CWM recovery for every android
McJesus15 said:
Trying this right now. Hope the recovery.img from a stock nandroid works.
Click to expand...
Click to collapse
Share in simple steps to extract stock recovery.img after u successfully get ur cwm
Sent from my Aqua flash using xda premium

Re: clockworkmod for newer devices - now get CWM recovery for every android
drganbds said:
Share in simple steps to extract stock recovery.img after u successfully get ur cwm
Sent from my Aqua flash using xda premium
Click to expand...
Click to collapse
My device is different. Technically I have cwm recovery already. It's just only accessible through a fast boot command. This allows me to have a nandroid back up already so I just took the recovery.img from a stock back up
Sent from my Zio using xda app-developers app

check this thread is updated...

I tried this for a Lenovo IdeaTab A2109 to try and build a touch recovery. It already has a unofficial cwm recovery non touch, so I used that as the recovery.img. It put out 2 recovery.img's. One was a recovery.img and the other inputreovery.img. I'm not sure what one I should flash or if I'm supposed to flash both. Would it put out errors if it didn't work?
Thanks for this post and any help you can give.

linsalata28 said:
I tried this for a Lenovo IdeaTab A2109 to try and build a touch recovery. It already has a unofficial cwm recovery non touch, so I used that as the recovery.img. It put out 2 recovery.img's. One was a recovery.img and the other inputreovery.img. I'm not sure what one I should flash or if I'm supposed to flash both. Would it put out errors if it didn't work?
Thanks for this post and any help you can give.
Click to expand...
Click to collapse
Inputrecovery.img is wat u uploaded and recovery.img is wat u get as cwm recovery.
Sent from my Aqua flash using xda premium

drganbds said:
Inputrecovery.img is wat u uploaded and recovery.img is wat u get as cwm recovery.
Sent from my Aqua flash using xda premium
Click to expand...
Click to collapse
Oh OK. What about the question I asked about errors? Will it give any errors if the recovery wont work?
Thanks for the quick reply.

linsalata28 said:
Oh OK. What about the question I asked about errors? Will it give any errors if the recovery wont work?
Thanks for the quick reply.
Click to expand...
Click to collapse
If it gives error like black screen or volume key unfunction means it is not compiled properly but don't worry your device won't brick and u can revert back ur recovery by placing original.img on the root of phone storage and flash through mobileuncle tool..all the best
Sent from my Aqua flash using xda premium

Three Questions and I'm gonna try this out:
1. If the CWM recovery I build from CWM builder doesn't work, can I flash back the stock recovery by Mobile Uncle Tools, I mean won't it brick the device, can I still boot? I have a MT6577 device.
2. Does the script provided here backups up the stock recovery on Ice Cream Sandwich?
3. What else does this script do? Backup the whole phone?

ApplePriest said:
Three Questions and I'm gonna try this out:
1. If the CWM recovery I build from CWM builder doesn't work, can I flash back the stock recovery by Mobile Uncle Tools, I mean won't it brick the device, can I still boot? I have a MT6577 device.
2. Does the script provided here backups up the stock recovery on Ice Cream Sandwich?
3. What else does this script do? Backup the whole phone?
Click to expand...
Click to collapse
1. Yes u can reflash you stock recovery back via mobile uncle tool
2. Yes it will work on ICS
3. I have shown that wat the backup folder will have...it does full backup of your phone....
Sent from my Aqua flash using xda premium

Okay, Thank you.
I will try and update you on this.
Edit: After flashing recovery, I got blank screen in recovery mode.

thanx mate , really a helpfu guide i have Xtouch x714 with Allwinner A13 chip
before i tried many A13 CWM none of them worked not even boot , they nearly damage my tablet
thank god there is Phoneixcard i was able to revive it .
Anyway , your methode of getting the recovery.img from [gscript] did not work for me , it kept give me errors
even though it shows 100% complete
so i used another method to get my recovery.img , hence my tablet is an Allwinner A13 chip, so
i used [ Rom Dump ] which a small and powerful tool run it in Windows from [ http://www.techknow.me ]
it uses ADB so u have to be rooted and enable developer mode in your device and have ADB drivers in your PC
it backup image of your system and boot.img , recovery.img and data
so i used the extracted recovery.img in the site you provide me and i got my new recovery.img and flash it to my tablet via NovoTools 1.0
and i test it , it works like charm , thanx again mate really helpful

step 2 no working....website down?

Black Screen
When I flashed recovery made through it, it gave me a black screen Is there any way to fix this??

the online one is not working
i tried twice for micromax a84... i got the CWM recovery and flashed it via mobile uncle tools...but it didnt work

?
after hitting "build" it states
your build has been queued.The
build id is
9b42b141e21a35c4007c250f45ab2039
continue to the build sever
view the current build output
when i hit either option i get "HTTP ERROR 404.
can anyone else see my build id and if so can you download it and link it to me via PM.
or what can i do to get my image

Cwm by rajit For XOLO Q700 & Q700i

holla guyz.....
JOIN OUR FB GROUP
after XOLO q700i UPdate many thing has been changed .. i know xolo Q700 previous cwm recovery does not support internal sd card.. thats why am unable to active OTA in Xperia Rom. So decided to Proper CWM..
DOWNLOAD CWM
Click to expand...
Click to collapse
Now you can use both ur internal and external Sdcard In cwm :highfive:​
INSTRACTION : You Can Use Sptools OR Mobile Uncle.apk
NOTE** = after flashing CWM You must Disable 1. Toggle Signature verification 2. toggle asserts Must
thanks to @rua1
Press thanks :highfive:

CWM flashed successfully through Mobile Uncle App.. Thanks!

rajit said:
NOTE** = after flashing CWM You must Disable 1. Toggle Signature verification 2. toggle asserts Must
Press thanks :highfive:​
Click to expand...
Click to collapse
How to do that above 1 and 2 ?​

need help
recovery is installed
i can reboot in recovery mode only when i installed it
next time when i reboot in recovery through volume up + power key it goes some fsctory recovery mode where which is not the same recovery i have flashed
and i don't know how to change these values
and what is the use of another fi;e provided in package
need help

micromax A90 custom rom

New custom ROM for micromax A90.
BLACKMAX A90
installation instructions :-
step 1. first of all backup your data partition using reovery.(LEWA RECOVERY for A90 is best because it can restore without md5 checking sometime needed ).
step 2. now download this file and copy to sdcard.
step 3. reboot to recovery holding up vol + power buttons.
step 4. select the blackmaxA90.zip file from sdcard and install.
step 5. now if you want your data back as like old you can restore data partition ( which you backed up at first step 1.) using recovery.
step 6. if you don't want to restore your data partition skip step 5 and reboot your device.
warning: use this thread on your own risk.don't blame anyone else if you bricked your device yourself

Any hopes on a Jellybean ROM for A90?

There are no more updates for mtk6575 and 6577 chips.
all are working for new chipset 6589 devices.

Project JB for mixromax a90 !!!
hackersecrets said:
New custom ROM for micromax A90.
BLACKMAX A90
installation instructions :-
step 1. first of all backup your data partition using reovery.(LEWA RECOVERY for A90 is best because it can restore without md5 checking sometime needed ).
step 2. now download this file and copy to sdcard.
step 3. reboot to recovery holding up vol + power buttons.
step 4. select the blackmaxA90.zip file from sdcard and install.
step 5. now if you want your data back as like old you can restore data partition ( which you backed up at first step 1.) using recovery.
step 6. if you don't want to restore your data partition skip step 5 and reboot your device.
warning: use this thread on your own risk.don't blame anyone else if you bricked your device yourself
if you want moded playstore (as shown on last screenshot ) download this file.
after download don't install it directly.
follow these steps
1. open x-plore app and make sure to give it root permission in configurations.
2. now open root/system/app and delete Phonesky.apk file and copy downloaded Phonesky.apk to root/system/app that's it.
it should work on all rooted devices.
Click to expand...
Click to collapse
i was searching JB for mtk 6575 and i found a link hope it cant help u to make JB rom for A90...
http://ejiayu.blogspot.in/2013/05/jiayu-g2-mtk6575-single-core-jelly-bean.html

manuhackzzz said:
i was searching JB for mtk 6575 and i found a link hope it cant help u to make JB rom for A90...
http://ejiayu.blogspot.in/2013/05/jiayu-g2-mtk6575-single-core-jelly-bean.html
Click to expand...
Click to collapse
Thanks for the link.:good:..i will check it, hope jelly bean on A90 Works.

finger crossed...

MT6575 kernel sources
hackersecrets said:
Thanks for the link.:good:..i will check it, hope jelly bean on A90 Works.
Click to expand...
Click to collapse
https://disk.yandex.com/public/?hash=Wa12BdzjqacGTe2503BCYxwf4AbX0DoCyZf1HK2kd5U=

Does this work ???
htckitkatrom(dot)blogspot(dot)in/2013/05/upgradeupdate-micromax-a90-to-42-jelly.html[/url]

kumars.02 said:
htckitkatrom(dot)blogspot(dot)in/2013/05/upgradeupdate-micromax-a90-to-42-jelly.html[/url]
Click to expand...
Click to collapse
It's fake dont download anything from there !!!:angel:

bad news for jelly bean on a90
not booting properly....
may be problem in kernel
can anyone help in making jelly bean kernel????

[ROM][PORT][COLOR ROM] Gionee Dream D1

COLOR ROM for GIONEE Dream D1/Walton Primo X1
Be care full I am not responsible for anything happen to your device whether good or bad.
System partition requirement is around 800MB, if you don't have don't go ahead
Download:
Dream_D1_COLOR_V2
GPS Patch
put zip file in sdcard and install from recovery.
Installation Instruction
Take backup first
1. Download ROM from above link.
2. Put it in your SDCARD.
3. Reboot into Recovery.
4. Do factory reset(format data and catch partition).
5. Install Downloaded file.
6. Reboot..
7. Wait some time.. first boot takes time(3 to 5 minutes).
Working
Bugs
Waiting for someone report..

reserved

deepak2111 said:
COLOR ROM for GIONEE Dream D1/Walton Primo X1
Be care full I am not responsible for anything happen to your device whether good or bad.
System partition requirement is around 800MB, if you don't have don't go ahead
Download:
Dream_D1_COLOR_V2
Installation Instruction
Take backup first
1. Download ROM from above link.
2. Put it in your SDCARD.
3. Reboot into Recovery.
4. Do factory reset(format data and catch partition).
5. Install Downloaded file.
6. Reboot..
7. Wait some time.. first boot takes time(3 to 5 minutes).
Working
Bugs
Waiting for someone report..
Click to expand...
Click to collapse
Can you give the process to increase the system space

@debasish497 i need to analyse and test first, till you can flash stock rom by using SPFLASHTOOL and then custom recovery then color rom,
Stock have 830 MB if system partition.
Sent from my R819 using xda app-developers app

deepak2111 said:
@debasish497 i need to analyse and test first, till you can flash stock rom by using SPFLASHTOOL and then custom recovery then color rom,
Stock have 830 MB if system partition.
Sent from my R819 using xda app-developers app
Click to expand...
Click to collapse
Hi
I have a equivalent (Allview P6 quad)
Please point to what stock you refer to ... this one ? http://androidxda.com/download-gionee-stock-rom-models
My current 4.2.2 Walton has a 630 mb system partition
Also, what is the version of Android in your color rom
Thank you

[ROMS][Root][Mods] QMobile i9

Do All The Following At Your Own Risk. I Will Not Be Responsible In Any Case.
Click to expand...
Click to collapse
Rooting​
1.Rooting i9 stock rom is very simple, download the framaroot app attached below
2.Install framaroot
3.Open framaroot and select install supersu
4.Choose the 3rd method (Barahir)
5.Now install busybox if you want
6.You are now rooted
For KitKat Update Click Here
Credits
umangleekha​

Custom Recovery
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
http://www.mediafire.com/download/b99962l7273y4du/MPRioRecoveryInstaller.apk
Credits
ng0tkul4​

Battery Mod
You must have noticed that about 4% battery is drained till morning when phone is in standby, a simple buildprop tweak can solve this and now my phone drains only 0% OR 1% battery in standby overnight, just follow the steps below-
1.You must be rooted before doing this
2.Download root browser from playstore
3.Open Root Browser.
4.Scroll down and open system folder
5.Open build.prop, you will see a menu asking how to open the file, select Text Editor
6.Now be very careful, don't make any mistake here
7.Scroll to the bottom and type "pm.sleep_mode=1"
8.Now press back button twice then press yes to save the changes and restart
9.Now enjoy no battery drain
Credits
umangleekha​

Stock ROM
1) Download the ROM from the link https://mega.co.nz/#!YwBRkCxB!hTSU0eqI-zMwufgqug2qaHpVrTutXnPCn4rPVJfAtEM.
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
Credits
malick186​

Miui ROM with OTA updates
Features:
Official MIUI V5
Nokia Keyboard
Official OTA updates
Extreme Scrolling
Init.d Support
Zipaligned
1) Download the ROM from the link http://d-h.st/Pc2
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
OTA Updates
Click Here For Updates
Credits
INCPAK Team
helloansuman​

Custom ROMs
Reserved For More ROMs

KitKat Rom For i9
For Updating QMobile i9 to KitKat Follow This Link
KitKat QMobile i9 Link

Need some help bro! Whenever flash the miui rom my internal sd card dnt get mounted! Any workaround which you know??? reply asap!
Sent from my MIUI using XDA Free mobile app

Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow

qwerfaseeh said:
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
Click to expand...
Click to collapse
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app

malick186 said:
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
Click to expand...
Click to collapse
Use this miui rom and update it with OTA it has no bugs
http://d-h.st/Pc2

QMobile i9 is now supported by MIUI India so visit to get latest updates
http://forum.miui.co.in/viewtopic.php?t=1492

For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui

qwerfaseeh said:
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
Click to expand...
Click to collapse
i installed this lewa os v1 rom on i9 sim card not detect after restore imei can you please help
https://www.facebook.com/notes/myph...gua-rio-versions-v0-v1-and-v2/288315014697928

To restore imei you need to have busybox installed check that it has busybox installed or not and use latest version of MTK droid tools

Original QMobile i9 Rom
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!

Its already on post

AliZaib1 said:
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Click to expand...
Click to collapse
Next time search before you post anything. :banghead:
Sent from my SGH-T999 using XDA Free mobile app

It is on my 2nd post, the link of which is posted on first page named kitkat for noir i9

I tried this method to install customer recovery in i9. But now my mobile isn't going into recovery. When I press both volume and power buttons it shows option to go into recovery and factory mode but then mobile just turns on if I press volume button or not. Can any one guide how to get my recovery fixed for Q mobile i9?. Thanks in advance.
qwerfaseeh said:
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
Click to expand...
Click to collapse