Related
New custom ROM for micromax A90.
BLACKMAX A90
installation instructions :-
step 1. first of all backup your data partition using reovery.(LEWA RECOVERY for A90 is best because it can restore without md5 checking sometime needed ).
step 2. now download this file and copy to sdcard.
step 3. reboot to recovery holding up vol + power buttons.
step 4. select the blackmaxA90.zip file from sdcard and install.
step 5. now if you want your data back as like old you can restore data partition ( which you backed up at first step 1.) using recovery.
step 6. if you don't want to restore your data partition skip step 5 and reboot your device.
warning: use this thread on your own risk.don't blame anyone else if you bricked your device yourself
Any hopes on a Jellybean ROM for A90?
There are no more updates for mtk6575 and 6577 chips.
all are working for new chipset 6589 devices.
Project JB for mixromax a90 !!!
hackersecrets said:
New custom ROM for micromax A90.
BLACKMAX A90
installation instructions :-
step 1. first of all backup your data partition using reovery.(LEWA RECOVERY for A90 is best because it can restore without md5 checking sometime needed ).
step 2. now download this file and copy to sdcard.
step 3. reboot to recovery holding up vol + power buttons.
step 4. select the blackmaxA90.zip file from sdcard and install.
step 5. now if you want your data back as like old you can restore data partition ( which you backed up at first step 1.) using recovery.
step 6. if you don't want to restore your data partition skip step 5 and reboot your device.
warning: use this thread on your own risk.don't blame anyone else if you bricked your device yourself
if you want moded playstore (as shown on last screenshot ) download this file.
after download don't install it directly.
follow these steps
1. open x-plore app and make sure to give it root permission in configurations.
2. now open root/system/app and delete Phonesky.apk file and copy downloaded Phonesky.apk to root/system/app that's it.
it should work on all rooted devices.
Click to expand...
Click to collapse
i was searching JB for mtk 6575 and i found a link hope it cant help u to make JB rom for A90...
http://ejiayu.blogspot.in/2013/05/jiayu-g2-mtk6575-single-core-jelly-bean.html
manuhackzzz said:
i was searching JB for mtk 6575 and i found a link hope it cant help u to make JB rom for A90...
http://ejiayu.blogspot.in/2013/05/jiayu-g2-mtk6575-single-core-jelly-bean.html
Click to expand...
Click to collapse
Thanks for the link.:good:..i will check it, hope jelly bean on A90 Works.
finger crossed...
MT6575 kernel sources
hackersecrets said:
Thanks for the link.:good:..i will check it, hope jelly bean on A90 Works.
Click to expand...
Click to collapse
https://disk.yandex.com/public/?hash=Wa12BdzjqacGTe2503BCYxwf4AbX0DoCyZf1HK2kd5U=
Does this work ???
htckitkatrom(dot)blogspot(dot)in/2013/05/upgradeupdate-micromax-a90-to-42-jelly.html[/url]
kumars.02 said:
htckitkatrom(dot)blogspot(dot)in/2013/05/upgradeupdate-micromax-a90-to-42-jelly.html[/url]
Click to expand...
Click to collapse
It's fake dont download anything from there !!!:angel:
bad news for jelly bean on a90
not booting properly....
may be problem in kernel
can anyone help in making jelly bean kernel????
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
puduraja said:
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
Click to expand...
Click to collapse
thanks a lot
will give a try n let u know abt performance n any other things
Downloaded...Flashed...Bricked...Recovered.
Do All The Following At Your Own Risk. I Will Not Be Responsible In Any Case.
Click to expand...
Click to collapse
Rooting
1.Rooting i9 stock rom is very simple, download the framaroot app attached below
2.Install framaroot
3.Open framaroot and select install supersu
4.Choose the 3rd method (Barahir)
5.Now install busybox if you want
6.You are now rooted
For KitKat Update Click Here
Credits
umangleekha
Custom Recovery
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
http://www.mediafire.com/download/b99962l7273y4du/MPRioRecoveryInstaller.apk
Credits
ng0tkul4
Battery Mod
You must have noticed that about 4% battery is drained till morning when phone is in standby, a simple buildprop tweak can solve this and now my phone drains only 0% OR 1% battery in standby overnight, just follow the steps below-
1.You must be rooted before doing this
2.Download root browser from playstore
3.Open Root Browser.
4.Scroll down and open system folder
5.Open build.prop, you will see a menu asking how to open the file, select Text Editor
6.Now be very careful, don't make any mistake here
7.Scroll to the bottom and type "pm.sleep_mode=1"
8.Now press back button twice then press yes to save the changes and restart
9.Now enjoy no battery drain
Credits
umangleekha
Stock ROM
1) Download the ROM from the link https://mega.co.nz/#!YwBRkCxB!hTSU0eqI-zMwufgqug2qaHpVrTutXnPCn4rPVJfAtEM.
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
Credits
malick186
Miui ROM with OTA updates
Features:
Official MIUI V5
Nokia Keyboard
Official OTA updates
Extreme Scrolling
Init.d Support
Zipaligned
1) Download the ROM from the link http://d-h.st/Pc2
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
OTA Updates
Click Here For Updates
Credits
INCPAK Team
helloansuman
Custom ROMs
Reserved For More ROMs
KitKat Rom For i9
For Updating QMobile i9 to KitKat Follow This Link
KitKat QMobile i9 Link
Need some help bro! Whenever flash the miui rom my internal sd card dnt get mounted! Any workaround which you know??? reply asap!
Sent from my MIUI using XDA Free mobile app
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
qwerfaseeh said:
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
Click to expand...
Click to collapse
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
malick186 said:
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
Click to expand...
Click to collapse
Use this miui rom and update it with OTA it has no bugs
http://d-h.st/Pc2
QMobile i9 is now supported by MIUI India so visit to get latest updates
http://forum.miui.co.in/viewtopic.php?t=1492
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
qwerfaseeh said:
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
Click to expand...
Click to collapse
i installed this lewa os v1 rom on i9 sim card not detect after restore imei can you please help
https://www.facebook.com/notes/myph...gua-rio-versions-v0-v1-and-v2/288315014697928
To restore imei you need to have busybox installed check that it has busybox installed or not and use latest version of MTK droid tools
Original QMobile i9 Rom
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Its already on post
AliZaib1 said:
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Click to expand...
Click to collapse
Next time search before you post anything. :banghead:
Sent from my SGH-T999 using XDA Free mobile app
It is on my 2nd post, the link of which is posted on first page named kitkat for noir i9
I tried this method to install customer recovery in i9. But now my mobile isn't going into recovery. When I press both volume and power buttons it shows option to go into recovery and factory mode but then mobile just turns on if I press volume button or not. Can any one guide how to get my recovery fixed for Q mobile i9?. Thanks in advance.
qwerfaseeh said:
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
Click to expand...
Click to collapse
As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......
Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c
Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Bug Fixes:
Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later
sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.
Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:
Does security and cleaner app works fine or still has reboot issues...
Inbuilt browser fc..
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
sujon3903 said:
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
Click to expand...
Click to collapse
Nice one, Man. If you need some help, I am here.
Does this work on LUA-U23?
DiegoxG said:
Does this work on LUA-U23?
Click to expand...
Click to collapse
This ROM, is developed by dev on android latino org. So you can ask the dev, Does this ROM can be used on U23.
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
viper7144 said:
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
Click to expand...
Click to collapse
Can you give screenshot and logcat?
will this remove huawei apps like huawei backup??
drkpntr said:
will this remove huawei apps like huawei backup??
Click to expand...
Click to collapse
Well, Installing custom ROM will remove official features like cloud storage, device account, system data, and user data.
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
drkpntr said:
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
Click to expand...
Click to collapse
I think huawei backup will not work properly, because Huawei system use huaweisdk and sync data to account. If you do that, the apps will force close, because Not all custom ROM have same process. Example, you are installing huawei backup, This mean the huawei backup cant work properly(force close) or else. You need a SDK to run huawei system apps. (Like MIUI from Xiaomi)
---------- Post added at 10:50 AM ---------- Previous post was at 10:45 AM ----------
If you want to try please backup your data and system. And Try to install huawei backup. if the apps force close. You can go back to your previous ROM
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
pojunkampar said:
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
Click to expand...
Click to collapse
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Reed_405 said:
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Click to expand...
Click to collapse
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
pojunkampar said:
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
Click to expand...
Click to collapse
Before trying to install this ROM, you must follow the order first.
1. Unlock Bootloader
2. Installing Philz/CWM/TWRP
3. Do wipe
4. Install the ROM, SuperSU, and other stuff
5. Reboot system
6. Wait 5-10 minutes
7. Enjoy
Why is my phone stuck on start after flashing the Rom .
Sandip Rai said:
Why is my phone stuck on start after flashing the Rom .
Click to expand...
Click to collapse
Have you follow the instruction?
The link is down.... Anyone please give new download link
aroien said:
The link is down.... Anyone please give new download link
Click to expand...
Click to collapse
Okay, since the owner didnt active to reply this message. So I would like to say that this is like disbanded. If I have time I ll give the link. Please wait.
Link not Working
Link not Working
Download Link.........
Cyanogenmod 12.1 Custom Rom please give me the download link..