Hey guys... I have the tmobile Nexus 5 and recently installed the Paranoid Android Alpha build....when I did I have no APNs listed and have removed the SIM and reinserted it, wiped and flashed, etc. and still no APNs... Can anyone help me?
Can you manually enter one?
Name: T-Mobile US LTE
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC: 310
MNC: 260
APN type: default,supl,mms
APN protocol: IPv4/IPv6
Thanks for the reply, turns out the fault was in the ROM itself, not a fault of the phone or myself.
Related
I recently rooted my AT&T Nexus S (i9020a) and then after installing a rom, I discovered that my mobile data (3G and everything) was no working. The WiFi works fine but I can't call or text ;( Please help!
zjr51 said:
I recently rooted my AT&T Nexus S (i9020a) and then after installing a rom, I discovered that my mobile data (3G and everything) was no working. The WiFi works fine but I can't call or text ;( Please help!
Click to expand...
Click to collapse
make sure if aeroplane mode is off...
if its off then check if ur sim is properly inserted and that ur neuxus s showing the operator name
zjr51 said:
I recently rooted my AT&T Nexus S (i9020a) and then after installing a rom, I discovered that my mobile data (3G and everything) was no working. The WiFi works fine but I can't call or text ;( Please help!
Click to expand...
Click to collapse
Try this: go to settings, under wireless and networks, choose more settings if you're not on MIUI, and if you're on MIUI, skip this. then, choose mobile networks, access point names, delete everything there, then type in the following:
Name: AT&T PTA
APN: pta
Proxy:<Not set>
Port:<Not set>
Username:<Not set>
Password:<Not set>
Server:<Not set>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type:<Not set>
APN type: default,admin,fota,mms,supl,hipri
Back up APNs for if PTA doesn't work for you.
APN 1: (This is a Legacy APN and is typically not needed, unless you don't get HSPA+/3G in your area)
Name: AT&T
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,supl,agps,fota,dun
APN 2:
Name: AT&T HSPA+
APN: phone
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,supl,agps,fota,dun
APN 3 (SELECT THIS ONE WITH THE GREEN DOT):
Name: AT&T LTE
APN: pta
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
APN type: default,internet,supl
Doesn't work? try flash an AT&T radio here: http://forum.xda-developers.com/showthread.php?t=1116884
I just bought this used skyrocket yesterday. Everything was working fine after I bought it including the 4G mobile data. Today, I called at&t to register the phone on my account and switch my data plan to LTE. They said the phone is clean and made the changes for me. I then decided to perform a factory data reset to get rid of the previous user's stuff. After the reset, everything works EXCEPT mobile data. I've tried everything -- powering the phone off/on, turning packet data off/on, airplane mode off/on, removing/replacing the SIM. I called at&t back and they said the phone is still clean, it's not been reported stolen and it's not blacklisted.
The seller told me he had a custom rom on it at one point, but he restored it to factory condition. I went into recovery mode and it still has the stock recovery so I'm assuming it's not rooted nor does it have a custom rom.
Any idea what the problem might be?
Thanks,
dw
You are gonna need a 4g Sim card. They should've told you that on the phone. Also check that you have data packets enabled
Did you check your APN?
--------------------------------------------------------------------
Sent from my Skyrocket i727 running Team Dirt
--------------Nexus 7 running AOKP PUB--------------
That was it! My APN settings were completely blank. I used these settings from another thread
Name: ATT LTE
APN: pta
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: httpcolon//mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth type: Not set
APN type: internet + mms
APN protocol: IPv4
Enable/diable APJ: APN enabled
Bearer: Unspecified
Works great now. Thanks for your help.
dwestall said:
That was it! My APN settings were completely blank. I used these settings from another thread:
Name: ATT PTA
APN: pta
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: httpcolon//mmsc.mobile.att.net
MMS proxy: proxy.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth type: Not set
APN type: internet + mms
APN protocol: IPv4
Enable/diable APJ: APN enabled
Bearer: Unspecified
Works great now. Thanks for you help.
Click to expand...
Click to collapse
Make sure u thank Mike :good:
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Nexein said:
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Click to expand...
Click to collapse
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Shckr57 said:
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Click to expand...
Click to collapse
AT&T, I've tried resetting to default APNs as well as comparing mine to those in AT&T's Help and other peoples' own settings.
Droid2drummer said:
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Click to expand...
Click to collapse
See I can pick up wifi just fine, it's just my regular data that's acting up. I've tried looking into a guide for flashing radios but to be honest, I don't know much about LTE bands or anything. Is there a good guide here that I missed? It seems as simple as flashing one with CWR but I don't wanna ruin anything.
Write down your apn settings here so we can look at them
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Nexein said:
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Click to expand...
Click to collapse
-3G Settings-
Name: ATT
APN: wap.cingular
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: [email protected]
Password: cingular1
Server: <Leave in Blank>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms
APN Protocol: Leave it to the Default one
-4G Settings-
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: leave it to the Default one
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Nexein said:
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Click to expand...
Click to collapse
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Shckr57 said:
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Click to expand...
Click to collapse
Added both, tried selecting each one and I'm still having the same problem.
So to update, I've gone back to stock 4.4.4, straight from google, still not working, and then flashed the newest radio and that didn't do it either. Starting to thing it's a hardware problem, maybe actually is the SIM?
Ended up being the sim! Thanks for your help though, guys!
The most common issue I have run into with the GSI roms for the E5 Play (james) has been data not working, unfortunately all of the sprint APN settings I have found online have been incorrect for newer phones so here is a working APN based off of a stock E5 Play.
Name: internet
APN: x.ispsn
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mms.sprintpcs.com
MMS Proxy: oap7.sprintpcs.com
MMS Port: 80
MCC: 310
MNC: 120
Authentication Type: Not Set
APN Type: default,supl,mms,cbs,ia
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4
APN Enable/Disable: APN Enabled
Bearer: eHRPD, LTE
MVNO Type: None
If this helps you hit the Thanks button
Wow, I've been trying to fix this for a while now... I can finally go to sleep oh my lord... Thank you so much sir. One question though know how to make these apn settings stay even after rebooting?
sonymicronin said:
Wow, I've been trying to fix this for a while now... I can finally go to sleep oh my lord... Thank you so much sir. One question though know how to make these apn settings stay even after rebooting?
Click to expand...
Click to collapse
I haven't had an issue with them not sticking after a reboot, I'll look into it and let you know if I figure something out.
OKAY. So. The problem, in fact, had nothing to do with SIMlocking. It was trying to use a preinstalled T-mobile APN instead of the Ting APN.
One might think this would be the end of the problems, but it was not. I went in and manually selected the Ting APN. At this point I'm getting a normal LTE data indicator, and mobile data and SMS work, but phone calls still aren't. There are two separate Ting APNs, one for data and one for MMS. The one for MMS looked correct, but the one for data was missing information. Ting was supposed to send an automatic update to the phone to fix this, but although I was sent the message saying that they were sending it, it was not actually sent. So I went in to manually edit the APN according to these instructions:
APN settings for an X1 SIM cardNameTing DataAPNwholesaleMMSC
http://wholesale.mmsmvno.com/mms/wapenc
APN type*default,admin,fota,mms,supl,hipri,internet,dunMCC310MNC260APN protocolIPv4 / IPv6APN roaming protocolIPv4 / IPv6
Except I can't edit the Ting data profile. I can edit the SMS profile (though I don't want to, because it's not broken), and I can create a new profile, but I can't edit this one. So I think, okay, I'll make a new one and switch to that one. When I try to save it, it says my carrier doesn't allow profiles with the dun type, which is odd given it's in the default but I don't see why I'd actually need dial-up networking anyway, so I take that one out and save. It saves. I switch to that one. It switches.
I still cannot make calls.
Does anyone know why editing the data APN profile is locked, and how I can unlock it? Has anyone else had issues getting their carrier recognized by the new 19.1 LineageOS? What can I do to try to fix this? As much as I love the idea of never getting an actual phone call again, they are occasionally necessary.
_________________________________________________________________________________________________________________________________________
ORIGINAL TITLE AND POST:
H830 relocking (? maybe something else?) sim when LineageOS 19.1 is installed. Is there a fix?
I know there are already a million threads about trying to unlock H830s without access to the official app/with an ineligible phone/with a bad IMEI, etc. I have access to the official app and my IMEI clears just fine with my phone service provider. I'm... not hopeful, but given it is a different situation I thought it wouldn't hurt to ask.
Bought a phone sold as unlocked, then went through a convoluted process mostly following this guide (see my notes at the end) to get the bootloader unlocked and get Lineage 19.1 on there. At the stage with 15.1 unofficial lineage, it recognized my Ting sim card but seemed a little buggy, with fluctuating, mostly poor signal (as, honestly, one might expect from an early unofficial build). I didn't stay there long enough to investigate much further, but will do so later. At the stage with 19.1, it was locked to T-mobile again, though it also seemed to think my sim card was a T-mobile card, and allowed MMS but not calls. Knocked it back to stock 20A and used the app to "permanently" unlock it, which went without a hitch. Repeated the process, same result.
Is there any way to get this phone properly unlocked?
EDIT: The more I poke at this, the more I think the device really is unlocked properly now and something else weird is going on here. If it was just locked, my Ting SIM card shouldn't work at all and I should get some kind of alert about it, right? Instead the phone's listing T-mobile as my carrier and letting me send SMS, but not phone calls. Ting registers its existence as well, and I get signal on the signal indicator, just with a little "something is wrong" type exclamation point on it.
Here's some APN settings I found by setting my phone back on stock 20A (again) and going through the whole process of getting Lineage 19.1 on there (again).
From stock LG G5 on 20A
WAP service prompt successful
calls working, texts working
not set unless specified
Name: T-mobile LTE
APN: fast.t-mobile.com
MCC: 310
MNC: 260
APN type: default, xcap
APN protocol: IPv6
APN roaming protocol: IPv4
Name: Ting (primary)
APN: wholesale
MMSC: http://wholesale.mmsmvno.com/mms/wapenc
MCC: 310
MNC: 260
Authentication type: PAP
APN type: default, mms
APN protocol: IPv4
APN roaming protocol: IPv4
Name: EPDG MMS/XCAP
APN: tmus
MCC: 310
MNC: 260
Authentication type: PAP
APN type: xcap
APN protocol: IPv6
APN roaming protocol: IPv6
From stock LG G5, after recowvery exploit, TWRP, root
(no WAP service prompt, probably because I forgot to swap the card back and forth between another phone this time. Will try that and report back.)
calls working, texts working
not set unless specified
Name: T-mobile LTE (primary)
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC: 310
MNC: 260
APN type: default,supl,mms,xcap
APN protocol: IPv6
APN roaming protocol: IPv4
Name: EPDG MMS/XCAP
APN: tmus
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC: 310
MNC: 260
APN type: mms,xcap
APN protocol: IPv6
APN roaming protocol: IPv6
from Lineage 15.1 unofficial
no WAP service prompt after swapping card back and forth
calls not working, texts working
Not set unless specified
too many to go through in detail, presumably preloaded to work with many different carriers. will go through primary and Ting, and list any others enabled
Name: T-Mobile US LTE (primary)
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MCC: 310
MNC: 260
APN type:default,supl,mms,ia
APN protocol: IPv6
APN roaming protocol:IPv4/IPv6
Name: Ting Data
APN: wholesale
MCC: 310
MNC: 260
APN type: default,admin,fota,mms,supl,hipri,internet,dun
APN protocol: IPv6
APN roaming protocol: IPv6
Brightspot, multibrand
CellOne WAP, wap.cellular1.net
GIV Mobile, wholesale
GoSmart, multibrand
I-Wireless, i2-wireless.com
Net10, wap.tracfone
PTel, wholesale
Red Pocket, wholesale
Simple, simple
Solavei, solavei
StraightTalk T-Mobile, wap.tracfone
T-Mobile IMS, ims
Telcel America, wap.tracfone
Tracfone. wap.tracfone
US Mobile, pwg
Walmart Family Mobile, web.omwtoday.com
LineageOS 19.1 official
no WAP service prompt after swapping card back and forth (do get text saying update will be sent to phone, but that's it)
calls not working, texts working
Not set unless specified
Name: Ting Data
APN: wholesale
MCC: 310
MNC: 260
APN type: default,admin,fota,mms,supl,hipri,internet,dun
APN protocol:IPv6
APN roaming protocol:IPv6
MNVO type: GID
MVNO value: 6135
Name: Ting MMS
APN: wholesale
MMSC: http://wholesale.mmsmvno.com/mms/wapenc
MCC: 310
MNC: 260
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
MVNO type: GID
MVNO value: 6135