Sprint APN settings for data on GSI roms - Moto E5 Guides, News, & Discussion

The most common issue I have run into with the GSI roms for the E5 Play (james) has been data not working, unfortunately all of the sprint APN settings I have found online have been incorrect for newer phones so here is a working APN based off of a stock E5 Play.
Name: internet
APN: x.ispsn
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mms.sprintpcs.com
MMS Proxy: oap7.sprintpcs.com
MMS Port: 80
MCC: 310
MNC: 120
Authentication Type: Not Set
APN Type: default,supl,mms,cbs,ia
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4
APN Enable/Disable: APN Enabled
Bearer: eHRPD, LTE
MVNO Type: None
If this helps you hit the Thanks button

Wow, I've been trying to fix this for a while now... I can finally go to sleep oh my lord... Thank you so much sir. One question though know how to make these apn settings stay even after rebooting?

sonymicronin said:
Wow, I've been trying to fix this for a while now... I can finally go to sleep oh my lord... Thank you so much sir. One question though know how to make these apn settings stay even after rebooting?
Click to expand...
Click to collapse
I haven't had an issue with them not sticking after a reboot, I'll look into it and let you know if I figure something out.

Related

H2O Wireless on Inspire 4G (Working APN settings)

So I'm running my Inspire on H2O. These are the settings that work the best for me, with data and MMS. (These are different than their site recommends.) Hopefully this helps someone...
Name:
H2O Wireless
APN:
att.mvno
Proxy:
Not set
Port:
Not set
Username:
Not set
Password:
Not set
Server:
Notset
MMSC:
http://mmsc.cingular.com
MMS Proxy:
proxy.mvno.H2OMobileweb.com
MMS Port:
80
MCC:
310
MNC:
410
Authentication Type:
Not set
APN Type:
Not set
APN Protocol:
IPv4
mannn ive been looking everywhere with APN settings that will work. I just got the Galaxy S 3 and im using H20 and i was looking everywhere to get the mms and data working. Do you think its a bit slow the mms ?
Step on my foot here but what's the H20?
thechive.com
CYRAXDroid said:
Step on my foot here but what's the H20?
thechive.com
Click to expand...
Click to collapse
H2O wireless.
http://en.m.wikipedia.org/wiki/H2O_Wireless
"I am the Bacon Pope"
cwhitney24 said:
H2O wireless.
http://en.m.wikipedia.org/wiki/H2O_Wireless
"I am the Bacon Pope"
Click to expand...
Click to collapse
Oh..
thechive.com
I'm pretty sure Straight Talk does all that with unlimited data for $45 a month. I get 2Mb/s D and 1Mb/s U in a large area covering two states, PA and MD. Using an AT&T unlocked Note.
joe3681 said:
So I'm running my Inspire on H2O. These are the settings that work the best for me, with data and MMS. (These are different than their site recommends.) Hopefully this helps someone...
Name:
H2O Wireless
APN:
att.mvno
Proxy:
Not set
Port:
Not set
Username:
Not set
Password:
Not set
Server:
Notset
MMSC:
http://mmsc.cingular.com
MMS Proxy:
proxy.mvno.H2OMobileweb.com
MMS Port:
80
MCC:
310
MNC:
410
Authentication Type:
Not set
APN Type:
Not set
APN Protocol:
IPv4
Click to expand...
Click to collapse
Thank You Im using the Nexus 5 and it works perfectly.
9/21/14
These settings don't work anymore. Or at least picture messaging doesn't work
webekyle said:
9/21/14
These settings don't work anymore. Or at least picture messaging doesn't work
Click to expand...
Click to collapse
These are the settings I have that work for both 4G data and picture messaging. I'm using an AT&T ZTE Radiant Z740 Go Phone. Your setting options may or may not be different, you may have more or less settings, just plug in the info that seems to match what I posted. If you have to manually type APN Type then make sure no spaces are entered or auto added between "default,supl,mms". That prevented me from picture messaging for a long time before I noticed I had spaces.
Name: H2O
APN : att.mvno
Proxy: 66.209.11.33
Port: 80
Username: Not set
Password: Not set
Server: Not set
MMSC: h t t p : / / m m s c . c i n g u l a r . c o m (remove SPACES)
MMS Proxy: 66.209.11.33
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not Set
APN type: default,supl,mms
APN e/d: APN Enabled (greyed out)
Bearer: Unspecified

[Q] Please post definitive APNs to force 2G/3G/4G

I have been looking for this info for hours today and can't find a simple response.
I tried the *#*#4636#*#* trick, it doesn't stick.
Can someone post APNs that force 2G, 3G, and 4G non-LTE for the AT&T One X?
Is there a working mod that installs a toggle for this?
4636 trick is working fine for me.. but i'm not in AT&T..i'm using it in india and using cleanrom std.
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
theartialmartist said:
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
Click to expand...
Click to collapse
does the above APN give anyone constant disconnects/reeaallly spotty 4G?
I really want to permanently disable LTE but not at the expense of losing data every 2 blocks in NYC
please halp
theartialmartist said:
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
Click to expand...
Click to collapse
theartialmartist said:
does the above APN give anyone constant disconnects/reeaallly spotty 4G?
I really want to permanently disable LTE but not at the expense of losing data every 2 blocks in NYC
please halp
Click to expand...
Click to collapse
Its a known issue and it happens with everyone. Most likely because the LTE radio is still active , it just cant connect because the APN wont authenticate it. We need a true LTE off switch

Mobile data not working after factory data reset

I just bought this used skyrocket yesterday. Everything was working fine after I bought it including the 4G mobile data. Today, I called at&t to register the phone on my account and switch my data plan to LTE. They said the phone is clean and made the changes for me. I then decided to perform a factory data reset to get rid of the previous user's stuff. After the reset, everything works EXCEPT mobile data. I've tried everything -- powering the phone off/on, turning packet data off/on, airplane mode off/on, removing/replacing the SIM. I called at&t back and they said the phone is still clean, it's not been reported stolen and it's not blacklisted.
The seller told me he had a custom rom on it at one point, but he restored it to factory condition. I went into recovery mode and it still has the stock recovery so I'm assuming it's not rooted nor does it have a custom rom.
Any idea what the problem might be?
Thanks,
dw
You are gonna need a 4g Sim card. They should've told you that on the phone. Also check that you have data packets enabled
Did you check your APN?
--------------------------------------------------------------------
Sent from my Skyrocket i727 running Team Dirt
--------------Nexus 7 running AOKP PUB--------------
That was it! My APN settings were completely blank. I used these settings from another thread
Name: ATT LTE
APN: pta
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: httpcolon//mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth type: Not set
APN type: internet + mms
APN protocol: IPv4
Enable/diable APJ: APN enabled
Bearer: Unspecified
Works great now. Thanks for your help.
dwestall said:
That was it! My APN settings were completely blank. I used these settings from another thread:
Name: ATT PTA
APN: pta
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: httpcolon//mmsc.mobile.att.net
MMS proxy: proxy.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth type: Not set
APN type: internet + mms
APN protocol: IPv4
Enable/diable APJ: APN enabled
Bearer: Unspecified
Works great now. Thanks for you help.
Click to expand...
Click to collapse
Make sure u thank Mike :good:

So I've got service, can call/text, but I have absolutely no data/MMS

I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Nexein said:
I was running stock 4.4.2, rooted and unlocked, and my service/data were fine until today, when I just stopped being able to use data. I've tried rebooting, powering down for about half an hour, checked and double checked my APNs, and flashed Cm11. Haven't tried to flash a new radio alone since I figured cm11 would've come with a different radio from stock. A friend suggested it might be my SIM, but I would assume I would get no service at all if there was a problem there.
So where do I go from here? :V
Click to expand...
Click to collapse
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Shckr57 said:
Who is your carrier. Go to mobile networks/access point names/ and find your apn settings
Click to expand...
Click to collapse
AT&T, I've tried resetting to default APNs as well as comparing mine to those in AT&T's Help and other peoples' own settings.
Droid2drummer said:
Try proper radio. A sign is if your WiFi doesn't find signal usually bad mixed. I get this often. I flash lots on many devices but its simple. Anyway try your radio. And no ROMs normally have no radio unless it says otherwise or firmware. Peace.
Sent from my N3 using XDA Free mobile app
Click to expand...
Click to collapse
See I can pick up wifi just fine, it's just my regular data that's acting up. I've tried looking into a guide for flashing radios but to be honest, I don't know much about LTE bands or anything. Is there a good guide here that I missed? It seems as simple as flashing one with CWR but I don't wanna ruin anything.
Write down your apn settings here so we can look at them
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Nexein said:
Name: ATT LTE
APN: Phone
Proxy blank
Port blank
UN blank
PW blank
Server blank
MMSC: ht tp:// mmsc. mobile. att. net
MMS proxy: proxy. mobile. att. net
MMS port: 80
MCC: 310
MNC: 410
Auth blank
APN protocol: IPv4
APN roam: IPv4
APN Enabled
Bearer unspecified
MVNO type: None
Click to expand...
Click to collapse
-3G Settings-
Name: ATT
APN: wap.cingular
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: [email protected]
Password: cingular1
Server: <Leave in Blank>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms
APN Protocol: Leave it to the Default one
-4G Settings-
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: leave it to the Default one
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Nexein said:
Should I delete the other ones and just have those two? Cm11 came with like a bunch of them.
Click to expand...
Click to collapse
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Shckr57 said:
You can have as many as you like but it will only use one. It looks as if you are mixing the settings of different apns together
Click to expand...
Click to collapse
Added both, tried selecting each one and I'm still having the same problem.
So to update, I've gone back to stock 4.4.4, straight from google, still not working, and then flashed the newest radio and that didn't do it either. Starting to thing it's a hardware problem, maybe actually is the SIM?
Ended up being the sim! Thanks for your help though, guys!

Hisense A2 pro: No Internet connection, wrong APN?

Hi all,
recently I got my new phone Hisense A2 pro imported, but can't get it set up right. It's not the original ROM.
2g, 4g is written at the upper lefter corner and I can get SMS, but no internet connection. I think the APN settings are wrong, but I'm not sure and tried different settings. Does it sound as if it's a problem with the APN or could it be something else My recent settings are:
Name: o2 internet
APN: internet
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: 10.81.0.7:8002
MMS proxy: 82.113.100.5
MMS port: 8080
MCC: 262
MNC: 07
Authentication type: None
APN type: default,supl,mms
APN protocol: IPv4/IPv6
APN roaming protocol IPv4
Bearer: Unspecified
MVNO type: None
MVNO value: Not set
Many thanks in advance!
IMinoI said:
Hi all, recently I got my new phone Hisense A2 pro imported, but can't get it set up right. It's not the original ROM...
Click to expand...
Click to collapse
I don't have this device but, I believe that one or both of the following threads may be helpful for what you need and don't be afraid to ask for some member guidance within one of them.
https://forum.xda-developers.com/showthread.php?t=3694644
https://forum.xda-developers.com/showthread.php?t=3673945
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
...please i would to find a twrp and a custom rom but i sppose it is just a dream. i've just discovered this phone.... sold at onlu 120euro and at this price is incredible but i could not live without a twrp and possibly a custom rom......
IMinoI said:
Hi all,
recently I got my new phone Hisense A2 pro imported, but can't get it set up right. It's not the original ROM.
2g, 4g is written at the upper lefter corner and I can get SMS, but no internet connection. I think the APN settings are wrong, but I'm not sure and tried different settings. Does it sound as if it's a problem with the APN or could it be something else My recent settings are:
Name: o2 internet
APN: internet
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: 10.81.0.7:8002
MMS proxy: 82.113.100.5
MMS port: 8080
MCC: 262
MNC: 07
Authentication type: None
APN type: default,supl,mms
APN protocol: IPv4/IPv6
APN roaming protocol IPv4
Bearer: Unspecified
MVNO type: None
MVNO value: Not set
Many thanks in advance!
Click to expand...
Click to collapse
i have exactly same problem as you, have you solved it?are you in Germany? i'm in germany and my card is also o2, can see 4g but no data connection. But i have tried my girlfriend's card(Eplus), it worked. i may switch my provider

Categories

Resources