LG P500 what baseband i need for cyanogen mod ? - Optimus One, P500, V Q&A, Help & Troubleshooting

Hey im new in this and i want to install a Custom rom on my lg p500 optimus one.
First at all i want to know which of this two are better:
Cyanogen Mod 7.2 Official Or
http://forum.xda-developers.com/showthread.php?t=1811325
Then here are my phone specs :
Android: 2.2.2
Kernel: 2.6.32.9
Build FRG83
Software version: v10g
Do i need to update something to be able to install cyanogenmod ?
I mean this one v10g does it metter something ?
Thanks !

kiki1999struga said:
Hey im new in this and i want to install a Custom rom on my lg p500 optimus one.
First at all i want to know which of this two are better:
Cyanogen Mod 7.2 Official Or
http://forum.xda-developers.com/showthread.php?t=1811325
Then here are my phone specs :
Android: 2.2.2
Kernel: 2.6.32.9
Build FRG83
Software version: v10g
Do i need to update something to be able to install cyanogenmod ?
I mean this one v10g does it metter something ?
Thanks !
Click to expand...
Click to collapse
To begin with, Welcome to XDA Developers
Please review the LG Optimus One FAQ for answers to commonly asked questions.
As for which ROM is better... That's really a matter of personal preference. I'd suggest reading the FAQ first before making a hurried decision.
Starting with CM7 ( Android 2.3 ) all ROMs are for new baseband. From what info you've supplied your device is old baseband. If you choose a P500 specific ROM CM7.2 or later you will also need the old baseband patch. There is a link in the FAQ I mentioned above for downloading it. Should you decide to use any of Rasheds ROMs, just use the P509 variant. It's hardware is identical to the P500 but the P509 will always be an old baseband device. Rashed include the old baseband patch in the P509 and P506 ROMs. Do NOT flash a P506 ROM on your device. The touchscreens are different so they have different drivers.
Best of luck and once again, Welcome to XDA-Developers

shinobisoft said:
To begin with, Welcome to XDA Developers
Please review the LG Optimus One FAQ for answers to commonly asked questions.
As for which ROM is better... That's really a matter of personal preference. I'd suggest reading the FAQ first before making a hurried decision.
Starting with CM7 ( Android 2.3 ) all ROMs are for new baseband. From what info you've supplied your device is old baseband. If you choose a P500 specific ROM CM7.2 or later you will also need the old baseband patch. There is a link in the FAQ I mentioned above for downloading it. Should you decide to use any of Rasheds ROMs, just use the P509 variant. It's hardware is identical to the P500 but the P509 will always be an old baseband device. Rashed include the old baseband patch in the P509 and P506 ROMs. Do NOT flash a P506 ROM on your device. The touchscreens are different so they have different drivers.
Best of luck and once again, Welcome to XDA-Developers
Click to expand...
Click to collapse
thanks

shinobisoft said:
To begin with, Welcome to XDA Developers
Please review the LG Optimus One FAQ for answers to commonly asked questions.
As for which ROM is better... That's really a matter of personal preference. I'd suggest reading the FAQ first before making a hurried decision.
Starting with CM7 ( Android 2.3 ) all ROMs are for new baseband. From what info you've supplied your device is old baseband. If you choose a P500 specific ROM CM7.2 or later you will also need the old baseband patch. There is a link in the FAQ I mentioned above for downloading it. Should you decide to use any of Rasheds ROMs, just use the P509 variant. It's hardware is identical to the P500 but the P509 will always be an old baseband device. Rashed include the old baseband patch in the P509 and P506 ROMs. Do NOT flash a P506 ROM on your device. The touchscreens are different so they have different drivers.
Best of luck and once again, Welcome to XDA-Developers
Click to expand...
Click to collapse
Im really sorry for that but i have one more question i see you uloaded a old bb patch should i flash it before or after the rom flash ?
and is it good to install zip from sd card directly from ROM Manager without rebooting in recovery ?

kiki1999struga said:
Im really sorry for that but i have one more question i see you uloaded a old bb patch should i flash it before or after the rom flash ?
and is it good to install zip from sd card directly from ROM Manager without rebooting in recovery ?
Click to expand...
Click to collapse
NEVER use ROM Manager with this device. Flash old baseband patch after flashing the ROM. Once rooted, you can use FlashImageGUI to flash a custom recovery. Then reboot device to recovery and following flashing steps posted in the FAQ. FlashImageGUI is an application ( apk ). You can download it from Play Store. ROM must be on SDCARD to flash it via recovery. You can also use Android Flash Recovery to flash a custom recovery if you prefer using Windows. Link is in my signature. The download contains the drivers needed for Windows to detect your device. You must install them before attempting to flash the recovery. Drivers are located in the usb folder in the archive.

shinobisoft said:
NEVER use ROM Manager with this device. Flash old baseband patch after flashing the ROM. Once rooted, you can use FlashImageGUI to flash a custom recovery. Then reboot device to recovery and following flashing steps posted in the FAQ. FlashImageGUI is an application ( apk ). You can download it from Play Store. ROM must be on SDCARD to flash it via recovery. You can also use Android Flash Recovery to flash a custom recovery if you prefer using Windows. Link is in my signature. The download contains the drivers needed for Windows to detect your device. You must install them before attempting to flash the recovery. Drivers are located in the usb folder in the archive.
Click to expand...
Click to collapse
Thanks. And can i directly update my baseband as i sad top its v10g to V20g using KDZ ? Do i need root for kdz ?
i know im bad

kiki1999struga said:
Thanks. And can i directly update my baseband as i sad top its v10g to V20g using KDZ ? Do i need root for kdz ?
i know im bad
Click to expand...
Click to collapse
Honestly I'm not sure. I've try not to use KDZ because of all the devices that have been bricked by it. I'm not saying that yours will get bricked, but I was never willing to try. I still have a P509 but I don't use it anymore except for testing apps that I write. KDZ has bricked 2 P506's for me. But, I think the issue was that I left the SIM card in the device. Not sure tho. Sorry I cannot give you a more direct answer.

shinobisoft said:
Honestly I'm not sure. I've try not to use KDZ because of all the devices that have been bricked by it. I'm not saying that yours will get bricked, but I was never willing to try. I still have a P509 but I don't use it anymore except for testing apps that I write. KDZ has bricked 2 P506's for me. But, I think the issue was that I left the SIM card in the device. Not sure tho. Sorry I cannot give you a more direct answer.
Click to expand...
Click to collapse
Dude the officail update for my phone is not avaible anymore using lg mobile support tool so i cannot update but what does Upgrade REcovery mean ? it asks to put my model and serial and it says it wil upgrade it because i need new baseband which is 2.3 (gingerbread) and if i start Upgrade Recovery do you know what will happen ? Maybe upgrade it to Gingerbread ? The update is avaible in another coutries but not in mine

kiki1999struga said:
Dude the officail update for my phone is not avaible anymore using lg mobile support tool so i cannot update but what does Upgrade REcovery mean ? it asks to put my model and serial and it says it wil upgrade it because i need new baseband which is 2.3 (gingerbread) and if i start Upgrade Recovery do you know what will happen ? Maybe upgrade it to Gingerbread ? The update is avaible in another coutries but not in mine
Click to expand...
Click to collapse
It will update your recovery to the newest stock recovery is my guess but that won't work. Stock recovery doesn't allow for custom ROM installations. As I mentioned earlier, you will need to install a custom recovery and not thru LG Update. Along with Android Flash Recovery ( AFR ) there are many other tools here at XDA that are far safer to use than LG's software since most of LG's stuff is crap. Just do a little searching and you'll find what you're looking for. My job is not to give you all the answers you want, but to point you in the right direction. Here at XDA we stress using the Search feature.

shinobisoft said:
It will update your recovery to the newest stock recovery is my guess but that won't work. Stock recovery doesn't allow for custom ROM installations. As I mentioned earlier, you will need to install a custom recovery and not thru LG Update. Along with Android Flash Recovery ( AFR ) there are many other tools here at XDA that are far safer to use than LG's software since most of LG's stuff is crap. Just do a little searching and you'll find what you're looking for. My job is not to give you all the answers you want, but to point you in the right direction. Here at XDA we stress using the Search feature.
Click to expand...
Click to collapse
Ty so mutch dude You helped me a lot today

Related

[Request] Nandroid of Videotron Official Stock P999 2.2 Froyo

Hi,
Can someone please post a Nandroid image of the Videotron official stock P999 2.2 froyo ?
thanks a lot
I searched from hell and back when i first got my phone. Couldn't find anything
BEWARE!!! Videotron model is not a P999. Videotron has the P990 and has been updated to GB 2.3.4 rom. P999 roms/nandroids are not compatible with the Videotron 2X P990.
What are you talking about ?
About phone :
Model : LG-P999
On LG update :
Country : Canada
Model : LG-P999
Version : V11F
Look at the user guide :
h**p://support.videotron.com/residential/mobile/devices/lg-optimus-2x
I don't know where did you find that information but it's wrong!
iceskunk said:
What are you talking about ?
About phone :
Model : LG-P999
On LG update :
Country : Canada
Model : LG-P999
Version : V11F
Look at the user guide :
h**p://support.videotron.com/residential/mobile/devices/lg-optimus-2x
I don't know where did you find that information but it's wrong!
Click to expand...
Click to collapse
Sorry about that. Got it confused with the Fido Canada version, which is a P990 updated to 2.3.4.
No problem Videotron still doesn't update to gingerbread -_-
Yes, that kind of sucks. It seems that Wind and Videotron are the only 2X variants in the word not updated to GB yet. TMO USA's is a step behind the P990s also, which were all updated to 2.3.4 worldwide about a month or two ago. LG did a worldwide rolling update that took about two weeks to deploy.When LG did evaluation units for Tracfone (Simple Mobile) in the U.S. they made them a 2.3.4 build also for the P999. I suspect the problem with Wind and Videotron is they don't want to pay for the update (carriers usually pay on a per unit basis for non bug related updates). Hopefully they are working on ICS and everyone will just leapfrog to that in about six months or so.
Edit: Sorry for taking this off topic. I hope you can find someone with a stock Videotron unit that can flash CWM and make you a Nandroid of their unit.
iceskunk: check this thread...
http://forum.xda-developers.com/showthread.php?t=1366602
Could be a good idea to send a nicely worded PM to the user requesting a stock backup. Best of luck.
oh thanks i will send him a pm.
Do you still need it?
I am downloading this file, will test and let you know if this is what you are looking for:
http://www.megaupload.com/?d=7TDW422A
"File description: Rom Vidéotron original. "
Ok, I tried this out and it looks good. It's a stock 2.2.2 ROM with branded Videotron wallpaper, includes the Illico, Angry Bird Rio and Polaris Office apps, and is missing all nVidia apps (Tegra Zone, NFS, etc) that normally came with the retail phone (most if not all of these can be downloaded on XDA, just do a search in the Themes and Apps forum). Everything seems to work, including HDMI, but I only tested it for about half an hour, so no promises.
This will come handy if I need to send the unit back for servicing or replacement. Thanks to the (as yet unknown) user who uploaded this.
how do you flash this back to your phone? i also have the p999 but i flash with a p990 without knowing it now my phone is not working
i tried with clockworkmod but it doesnt work because i have flash it with nvflash using this method
http://android.modaco.com/topic/335...k-rom-release-v10b-dated-1300166062-15032011/
i think i have mofified some partition does anybody know how to flash it with nvflash please help me
This is a nandroid backup, not a flashable .zip file. You need to have CWM already installed (using the NVFlash method), create a sub-directory under clockwordmod/backup (I just named it "videotron"), unzip the backup files in that sub-directory, and use CWM's Restore function.
GenghisKhan67 said:
This is a nandroid backup, not a flashable .zip file. You need to have CWM already installed (using the NVFlash method), create a sub-directory under clockwordmod/backup (I just named it "videotron"), unzip the backup files in that sub-directory, and use CWM's Restore function.
Click to expand...
Click to collapse
If he flashed a P990 rom using NVFlash method it repartitioned his memory. That might make CWM not work properly as I am not sure if CWM repartitions memory or not.
jboxer said:
If he flashed a P990 rom using NVFlash method it repartitioned his memory. That might make CWM not work properly as I am not sure if CWM repartitions memory or not.
Click to expand...
Click to collapse
I made the same mistake before, I went back to stock recovery, then reset everything with NVFlash and reinstalled a P999 ROM (CM7, actually) and everything was working again.
oh thanks a lot it worked fine for me !
+1 GenghisKhan67
Videotron Stock ROM Nandroid backup
I made a backup of the Videotron STOCK ROM that didnt even get booted once (since I started by installing CWM with nvflasher before even booting) if anyone is interested!
xblitzz said:
I made a backup of the Videotron STOCK ROM that didnt even get booted once (since I started by installing CWM with nvflasher before even booting) if anyone is interested!
Click to expand...
Click to collapse
Just go ahead and post it to multiupload. I am sure that can be of use to many people. Thanks for sharing. I will download it to see what differences there are in the Videotron rom.

[Q] Baseband autoupdate?

Hello
If you have updated Android 2.2 phone to 2.3.5 V20a, and now v21d. It is necessary to make updates and baseband? Or adapted, alone?
We used the model update in the memory card, zip format
v21d official LG
http://forum.xda-developers.com/showthread.php?t=1155874
Thanks
If you install roms in zip format,your baseband does not change.
If you have to install baseband,you must either flash it with lg flash tool or flash a rom in kdz format with update tool.
liviugreuu said:
Hello
If you have updated Android 2.2 phone to 2.3.5 V20a, and now v21d. It is necessary to make updates and baseband? Or adapted, alone?
We used the model update in the memory card, zip format
v21d official LG
http://forum.xda-developers.com/showthread.php?t=1155874
Thanks
Click to expand...
Click to collapse
First of all welcome to XDA and second please this forum is like every other rom there are a dozen threads here regarding basebands please try and search before you post. But since this is your first time i will give you some advice search before you post and see you around enjoy...
And the answer to your question is you need to download either kdz file of the rom you want for instance 21A and then use the flash tools you find in the dev section and flash your phone it will flash a stock rom and update to 21a baseband... Then no matter what custom rom you install your baseband will always be 21a...
Or you can just download basebands but you won't find many baseband files as they are hard to extract....
Meemo23 said:
First of all welcome to XDA and second please this forum is like every other rom there are a dozen threads here regarding basebands please try and search before you post. But since this is your first time i will give you some advice search before you post and see you around enjoy...
And the answer to your question is you need to download either kdz file of the rom you want for instance 21A and then use the flash tools you find in the dev section and flash your phone it will flash a stock rom and update to 21a baseband... Then no matter what custom rom you install your baseband will always be 21a...
Or you can just download basebands but you won't find many baseband files as they are hard to extract....
Click to expand...
Click to collapse
Vodafone phone is bought, and I always put v20a. And this version has a problem, use the battery in 7 hours.
So I did and I root v21d updated by rom manager.
I tried to make adaptation by KDZ, but not always respond, before you start the programs do everything stops and erroare.
After I tried to change the product code, the version I gasito this forum spooffw program, but yes erroare. Another tutorial I found.
I was interested in the original bag directly android update program. But fail to change product code. And as they fail to change product code, I call vodafone v20a.

Install P500 ROM on T-mobile P509

Can I install any ROM made for P500 on my T-mobile T509? My understanding is P500 has new basebands while P509 has old one.
What if I flash the new basebands v20 on my P509, which is currently having old bb v10. Can i install any P500 ROM on it?
Thanks.
If you want to flash P500 roms on your P509, you will need to flash this file as well:
http://www.mediafire.com/?tjyibxdbqyyrmwz
sweetnsour said:
If you want to flash P500 roms on your P509, you will need to flash this file as well:
http://www.mediafire.com/?tjyibxdbqyyrmwz
Click to expand...
Click to collapse
Thanks. I think this is the opposite way from what I was talking about. I believe this flash replaces the new bb with the old one to make the ROM work. The one I was asking is to upgrade old bb to new one.
ldi9999 said:
Thanks. I think this is the opposite way from what I was talking about. I believe this flash replaces the new bb with the old one to make the ROM work. The one I was asking is to upgrade old bb to new one.
Click to expand...
Click to collapse
You don't need to change the baseband if you don't want to. Just flash the old baseband fix right after the ROM, before rebooting. I've been doing this for years with my p509 with awesome results. I figure why screw around with the baseband change when this combo had worked so well for me and takes only a few extra minutes.
Btw...the old baseband fix doesn't change your baseband it only makes the new baseband ROMs work with a phone running the old baseband.
Swyped from my P509 on Tmobile.
With Swype and Flash, why would anyone choose the iPhone?
mrlamo said:
You don't need to change the baseband if you don't want to. Just flash the old baseband fix right after the ROM, before rebooting. I've been doing this for years with my p509 with awesome results. I figure why screw around with the baseband change when this combo had worked so well for me and takes only a few extra minutes.
Btw...the old baseband fix doesn't change your baseband it only makes the new baseband ROMs work with a phone running the old baseband.
Swyped from my P509 on Tmobile.
With Swype and Flash, why would anyone choose the iPhone?
Click to expand...
Click to collapse
Good to know. So that means I could flash any P500 ROM on my P509 and then apply the bb fix on it. Am I right? Thanks.
ldi9999 said:
Good to know. So that means I could flash any P500 ROM on my P509 and then apply the bb fix on it. Am I right? Thanks.
Click to expand...
Click to collapse
Yes
I have a tmobile P509 as well. I read that the new baseband doesn't have all of tmobile's frequencies on it so I want to stay on the old one. So can I install the latest cm7 on this and then flash the old baseband fix and still be able to access all the frequencies/towers and have everything work?
Also, if I wanted to flash a new kernal on the cm7 rom I would need a .35 kernel correct?
Viper Daimao said:
I have a tmobile P509 as well. I read that the new baseband doesn't have all of tmobile's frequencies on it so I want to stay on the old one. So can I install the latest cm7 on this and then flash the old baseband fix and still be able to access all the frequencies/towers and have everything work?
Also, if I wanted to flash a new kernal on the cm7 rom I would need a .35 kernel correct?
Click to expand...
Click to collapse
Yes to the first question. That's what I do I think the kernel is a .32 kernel, but I'm not 100% sure. CM7.2, atleast the version I'm running, already has overclocking ,etc. it that's what you're looking to do with the kernel.
Advice needed ..
mrlamo said:
You don't need to change the baseband if you don't want to. Just flash the old baseband fix right after the ROM, before rebooting. I've been doing this for years with my p509 with awesome results. I figure why screw around with the baseband change when this combo had worked so well for me and takes only a few extra minutes.
Btw...the old baseband fix doesn't change your baseband it only makes the new baseband ROMs work with a phone running the old baseband.
Swyped from my P509 on Tmobile.
With Swype and Flash, why would anyone choose the iPhone?
Click to expand...
Click to collapse
Hi, Sorry for reliving an old thread.
I have a T-mobile P509 that is running Froyo, rooted -and nothing else done to it.
I read some threads which have complicated sequence of steps to get the P509 to use new versions of Android.
Until now, this thread appears to have a shorter path, and still be able to use any P500 ROMs, I assume.
My apologies if this seems like I'm not too familiar, hope can correct/add anything I missed. I assume these are the correct steps:
1. Take the micro sd card and put it in an SD adapter connected to your PC.
2. Next, in the P500 ROMs section of this forum find a ROM that is suitable; say file is a ZIP file- FRG83.zip, download it to the PC and then copy it to the SD card.
3. Put your SD card back into the phone. Then go to the recovery menu. Volume_Up+home+power hold until the recovery menu pops up.
4. Then wipe the data, then install zip from SD card, choose the FRG83.ZIP file that you just downloaded and let it do its thing
5. Then reboot, go to recovery again and then install zip (the fix posted by sweetnsour on Dec 26th on this thread). Basically, the final step is that fix file, i.e ZIP file downloaded.
Are the steps correct? I am sorry, I am still reading and taking notes to get the order/sequence and any files ready before I take action.
Thanks any advice and help.

Which is the the best ROM with Full 3D support?

Hi guys.
I'm using stock ROMs (V21E + Stock Android 2.3.5) in my P920 for the past 3 months now, but I'm curious about Android 4 ROMs, and also about faster/less battery consuming ROMs and Kernels.
What combination of ROM + Kernel do you recommend?
I would like to keep the 3D possibilities of the phone (camera, gallery, video playback), if possible.
Thanks.
daniel.mota said:
Hi guys.
I'm using stock ROMs (V21E) in my P920 for the past 3 months now, but I'm curious about Android 4 ROMs, and also about faster/less battery consuming ROMs and Kernels.
What combination of ROM + Kernel do you recommend?
I would like to keep the 3D possibilities of the phone (camera, gallery, video playback), if possible.
Thanks.
Click to expand...
Click to collapse
Wrong Section also try all the ics rom see what works for you
To give you an answer
daniel.mota said:
Hi guys.
I'm using stock ROMs (V21E + Stock Android 2.3.5) in my P920 for the past 3 months now, but I'm curious about Android 4 ROMs, and also about faster/less battery consuming ROMs and Kernels.
What combination of ROM + Kernel do you recommend?
I would like to keep the 3D possibilities of the phone (camera, gallery, video playback), if possible.
Thanks.
Click to expand...
Click to collapse
Although defcomg was right, you should posted it in general sectionç a ROM with full 3D capabilities is just up to GingerBread, and with some difficulties in flashing the ROM, the ICS ROM ported by XBSALL.
The cyanogenmod ROMs are not with 3d capabilities and some of them have no working HDMI or other problems. So it's up to you.
Thanks BigBadSheep
BigBadSheep said:
Although defcomg was right, you should posted it in general sectionç a ROM with full 3D capabilities is just up to GingerBread, and with some difficulties in flashing the ROM, the ICS ROM ported by XBSALL.
The cyanogenmod ROMs are not with 3d capabilities and some of them have no working HDMI or other problems. So it's up to you.
Click to expand...
Click to collapse
Sorry about the wrong section, I would change it if I could.
I tried to install xbsall's ICS ROM (http://forum.xda-developers.com/showthread.php?t=1956347) this weekend, but couldn't.
I followed marti701's tutorial for installing BIN ROMs (http://forum.xda-developers.com/showthread.php?t=1244490), but failed.
My computer kept recognizing/unrecognizing omap4 device and I had a hard time installing it's driver (had to download it from another site and install it manually, it wouldn't install from windows update).
Also the "LGE CDMA USB SERIAL PORT" device wasn't installed in my computer, so I couldn't change the COM port to 41 as required.
Despite it I proceed with the tutorial, but LGFlashTool didn't install anyting, of course.
daniel.mota said:
Sorry about the wrong section, I would change it if I could.
I tried to install xbsall's ICS ROM (http://forum.xda-developers.com/showthread.php?t=1956347) this weekend, but couldn't.
I followed marti701's tutorial for installing BIN ROMs (http://forum.xda-developers.com/showthread.php?t=1244490), but failed.
My computer kept recognizing/unrecognizing omap4 device and I had a hard time installing it's driver (had to download it from another site and install it manually, it wouldn't install from windows update).
Also the "LGE CDMA USB SERIAL PORT" device wasn't installed in my computer, so I couldn't change the COM port to 41 as required.
Despite it I proceed with the tutorial, but LGFlashTool didn't install anything, of course.
Click to expand...
Click to collapse
2 weeks ago i was just like you too, i didn't know what do where to go and where to ask, so don't just get disappointed yet.
First thing first , you need to read more and more before start using Lg flash tool or any other flash tools out there, you will end up with brick phone. i been there so i know how it feels. all you have to do it find all the drivers necessary for your computer and then download http://forum.xda-developers.com/showthread.php?t=1956347
Go to Google translate and translate this site: http://forum.xda-developers.com/showthread.php?t=1244490
most driver you need is there.
I'll be here to help you for anythings that i already know, and for what i don't know we are like family in Xda developers we will ask those master and Developers and they will give you the right answer you need.
bensmokie said:
2 weeks ago i was just like you too, i didn't know what do where to go and where to ask, so don't just get disappointed yet.
First thing first , you need to read more and more before start using Lg flash tool or any other flash tools out there, you will end up with brick phone. i been there so i know how it feels. all you have to do it find all the drivers necessary for your computer and then download http://forum.xda-developers.com/showthread.php?t=1956347
Go to Google translate and translate this site: http://forum.xda-developers.com/showthread.php?t=1244490
most driver you need is there.
I'll be here to help you for anythings that i already know, and for what i don't know we are like family in Xda developers we will ask those master and Developers and they will give you the right answer you need.
Click to expand...
Click to collapse
bensmokie, those were the tutorials I followed.
I've installed kdz basebands/roms and kernels before without any problem, but those bin roms are a problem for me. Maybe the reason is Win7 64 bits in my computer.
Maybe I will try again next weekend, this is my daily use phone and I can't afford to mess with it during work days.
Thank you.
daniel.mota said:
bensmokie, those were the tutorials I followed.
I've installed kdz basebands/roms and kernels before without any problem, but those bin roms are a problem for me. Maybe the reason is Win7 64 bits in my computer.
Maybe I will try again next weekend, this is my daily use phone and I can't afford to mess with it during work days.
Thank you.
Click to expand...
Click to collapse
Try this one : http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.htmle
This guide have saved me in many ways so hope it will do the same to you.....to be honest i've bricked my phone many times so if something happen to yours don't be worry there is always guide on how to bring it back unless it the hardware it self got damaged or something.
Good luck
bensmokie said:
Try this one : http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.htmle
This guide have saved me in many ways so hope it will do the same to you.....to be honest i've bricked my phone many times so if something happen to yours don't be worry there is always guide on how to bring it back unless it the hardware it self got damaged or something.
Good luck
Click to expand...
Click to collapse
Thank you again, will try that tutorial as soon as I can.
I followed that tutorial today, phone entered green download mode ok, but in LG Flashtool I got a "Download FAIL" error trying to flash xbsall's ported rom...
A few messages kept appearing in LG Flashtool until "Set FLASH address".
Then, the phone shut itself off (korean letters disapeared)
Then, I got: error! IFXDownload
Error WM_PROGRESS_MSG
Code Download fail
FAIL
Tried 3 times now, always the same error...
Phone now boots normally and starts GB normally, but I have no network signal !
daniel.mota said:
I followed that tutorial today, phone entered green download mode ok, but in LG Flashtool I got a "Download FAIL" error trying to flash xbsall's ported rom...
A few messages kept appearing in LG Flashtool until "Set FLASH address".
Then, the phone shut itself off (korean letters disapeared)
Then, I got: error! IFXDownload
Error WM_PROGRESS_MSG
Code Download fail
FAIL
Tried 3 times now, always the same error...
Phone now boots normally and starts GB normally, but I have no network signal !
Click to expand...
Click to collapse
Thats weard never happen to me. anyway fallow this guide - http://forum.xda-developers.com/showthread.php?t=1942836
Download the BOOT V 21E the bin file and the Fls file flash both of them in lg flash tool or smart flash when you are done, let phone start and lets see if it has signal. IMO you should have . after that try to flash xbsall's ported rom i think you should be good to go. if does not work on LG flash too try smart flash well i prefer Lg flash tool because it saved my butt many time
Good luck!!!
PS don't forget to change your COM port to 41.
Sorry bensmokie, I did some more reading and tried a few more times, and I managed to flash rom correctly, it´s working.
The thing is I don't have network signal for now, I,m trying to solve it at this time.
daniel.mota said:
Sorry bensmokie, I did some more reading and tried a few more times, and I managed to flash rom correctly, it´s working.
The thing is I don't have network signal for now, I,m trying to solve it at this time.
Click to expand...
Click to collapse
well thats great then!!!, when you flashed the ICS did you flash it with the FLS or just the BIN file? You have to flash both of them.... anyway here the Baseband you should need, find for your country and you should be good to go.
http://forum.xda-developers.com/showthread.php?t=1974734
Working !
Flashed v30b baseband again, flashed bin rom again, and it's done!
Next step it's search for the bug solutions (camera and softkeys), root it and clean bloatware.
I'd like it to include my language (portuguese), but well...
Thanks again!
daniel.mota said:
Working !
Flashed v30b baseband again, flashed bin rom again, and it's done!
Next step it's search for the bug solutions (camera and softkeys), root it and clean bloatware.
I'd like it to include my language (portuguese), but well...
Thanks again!
Click to expand...
Click to collapse
Defcomg have been working on the camera mod, thanks to him we have the jelly bean camera working great on our ICS these day you can tray it
THANK YOU Defcomg!!!
well about Adding language i really never tried that one yet, but i am pretty sure there is already posted on that one, i use my phone in English only, even though my language is french but i love it in English
http://forum.xda-developers.com/showthread.php?t=1957839
daniel.mota said:
Working !
Flashed v30b baseband again, flashed bin rom again, and it's done!
Next step it's search for the bug solutions (camera and softkeys), root it and clean bloatware.
I'd like it to include my language (portuguese), but well...
Thanks again!
Click to expand...
Click to collapse
Use the combo on my signature, it works flawlessly. I'm from Porto too.
And use defcomg's modded LGcontacts3 and message plus profiles to solve the 80 characters bug in SMS.
omgomg said:
Use the combo on my signature, it works flawlessly. I'm from Porto too.
And use defcomg's modded LGcontacts3 and message plus profiles to solve the 80 characters bug in SMS.
Click to expand...
Click to collapse
Thanks neighbour!
I'll stick for now with this stock 4.0.4 rom, I'm loving it!
I've already rooted and cleaned, now I'll try to fix the bugs.
Will try defcomg's modded camera app and sms fixes.
The 4 softkeys problem is solvable with new kernel, right?

What are ROMs?

Hey, I am new to android development, and I was wondering if someone can give a simple and detailed explanation of a ROMs (for phones), like why you would use one and what some of the popular ones are.
Also if you could just give me a super simple explanation of how to use them, like download onto computer, install flashing program, etc.
All help appreciated!
-Matthew
Rom means your phone's android system.. (eg - you install windows to your computer using windows setup. You can install android using rom (framework)
Have you a Samsung device. You can install rom to your Samsung device easily. You can download compatible rom to your device in sammobile site. Then download odin software for pc. You can install the framewok through odin
Sent from my SHV-E210S using Tapatalk
[email protected] said:
Have you a Samsung device. You can install rom to your Samsung device easily. You can download compatible rom to your device in sammobile site. Then download odin software for pc. You can install the framewok through odin
Click to expand...
Click to collapse
I have a LG Optimus Exceed 2, my biggest question is why, why install a different ROM on a device?
MattTheCuber said:
I have a LG Optimus Exceed 2, my biggest question is why, why install a different ROM on a device?
Click to expand...
Click to collapse
No bloatware
More features
Although custom ROMs has more bugs, but they are great (I use AEX for example) every ROM has its own features at some point

Categories

Resources