Database Info

[Q] I need LG P925g Stock rom

Hello,
Recently, i have installed CM7 on my LG P925g and all work perfectly.
But i changed my phone for Samsung Galaxy S2 and i give my old phone for my girlfriend. She doesn't like CM7 and i though it will be more easier for her to get back the Stock rom than CM7.
I did a lot research on the web about this and i can't find anything good.
I find some threads...but with dead links.
Do someone can send me a LG P925g Stock rom that i can flash with CWM with a zip. ?
Or a Backup that i can use with CWM ( zip file )
I hope you could help me please...!!
Michael

Miks1205 said:
Hello,
Recently, i have installed CM7 on my LG P925g and all work perfectly.
But i changed my phone for Samsung Galaxy S2 and i give my old phone for my girlfriend. She doesn't like CM7 and i though it will be more easier for her to get back the Stock rom than CM7.
I did a lot research on the web about this and i can't find anything good.
I find some threads...but with dead links.
Do someone can send me a LG P925g Stock rom that i can flash with CWM with a zip. ?
Or a Backup that i can use with CWM ( zip file )
I hope you could help me please...!!
Michael
Click to expand...
Click to collapse
If i remember correctly you can download and install the lg mobile support tool (http://www.lg.com/us/support-mobile/lg-LGP925G scroll down a bit) write down your imei, (settings>about), then pop out the battery hold volume up and plug the usb cable in, aka download mode, the mobile support tool if you have it running and on the screen will try to look at it don't worry about that, Click on the customer support tab, the bottom item recovery phone, this is where your imei comes in, from there type in the IMEI and check, it should find the stock 20c firmware and from there it may need a few more clicks but you'll restore to stock 20c no custom recovery/root, but completely stock 20c.
Hope it helps, worked for me last time i screwed up lol

I justed registered to say thx!
Same problem here, screwed up and didnt know how to establish a working data connection with the pc..
the hint with the download mode really helped a lot, I didnt know that you had do pop out the battery, hold the volume up button and plug in the usb cable..

You can install any custom rom so there are many ROMs which are very stable and it's like the official rom too much not like the CM7 .. but you MUST do a backup before flash any CWM .zip so how cloud you install CM7 with out do a backup ??
Sent from my LG-P920

OS_Hacking said:
You can install any custom rom so there are many ROMs which are very stable and it's like the official rom too much not like the CM7 .. but you MUST do a backup before flash any CWM .zip so how cloud you install CM7 with out do a backup ??
Sent from my LG-P920
Click to expand...
Click to collapse
I had make a backup before flashing... but now isn't my phone and i don't find my backup... and my girlfriend doesn't like custom rom.
She want a stock rom.
it's why i post on this forum... i hope someone could help me !
Thank in advance and sorry for my poor english.

avengin said:
If i remember correctly you can download and install the lg mobile support tool, write down your imei, (settings>about), then pop out the battery hold volume up and plug the usb cable in, aka download mode, the mobile support tool if you have it running and on the screen will try to look at it don't worry about that, Click on the customer support tab, the bottom item recovery phone, this is where your imei comes in, from there type in the IMEI and check, it should find the stock 20c firmware and from there it may need a few more clicks but you'll restore to stock 20c no custom recovery/root, but completely stock 20c.
Hope it helps, worked for me last time i screwed up lol
Click to expand...
Click to collapse
Thank you so much for your comment, i'll get a try when my girlfriend come at home.
I hope this will be ok !
I have a question, some people said that ghost call happens with v20c.... they suggest to flash with v21e ...
it's a good idea ?

Reverting Back to Stock ROm
After finishing up with LG Mobile Support Tool, the phone starts the phone setup but doesnt go past the wifi. Keeps telling me "Not enough free space, clean up data and try again"
please help me.

zamgill said:
After finishing up with LG Mobile Support Tool, the phone starts the phone setup but doesnt go past the wifi. Keeps telling me "Not enough free space, clean up data and try again"
please help me.
Click to expand...
Click to collapse
Please do a factory reset!
schubeir

[Q] BIG problem after upgrading to V30a

Hello everyone,
I am having a big problem after upgrading to official V30a.When I open the phone it says ''unfortunately the process com.android.phone has stopped'' every 3 minutes or so.
That means that my signal is lost and I can't do anything because that thing keeps popping up.Please help me because I am starting to freak out.After 6 hours of googling it I cannot find a solution.I tried everything.
Factory reset,another sim,rebooting,even some odd tricks like changing date or clearing contact data which worked for some guys.Before that I had 2.3.5 stock.
Also I live in Greece if that matters and I updated via the official LG update tool twice(the one was the emergency recovery which didn't solve my problem either).
What is more I am a complete noob regarding the ics and any help/suggestion would be greatly appreciated.In case it is needed I am running windows 7 64bit and everything(firewall,antivirus,etc) was turned off while I did the update.
P.s Please excuse my poor knowledge of english.As I wrote above I am from Greece.
Best wishes to everyone who makes the moil(or labour I don't know which is the right one) to read all this

I recommend flashing xbsall Rom bootv21e. You can flash with smartflash as for bricked devices, check that here http://forum.xda-developers.com/showthread.php?t=2246001

Karim Kahale said:
I recommend flashing xbsall Rom bootv21e. You can flash with smartflash as for bricked devices, check that here http://forum.xda-developers.com/showthread.php?t=2246001
Click to expand...
Click to collapse
Thank you very much for trying to help but I do not want to downgrade,since I've been waiting for a long time for the update.Isn't there any way to make ics work?Thanks again

Sounds like a bad flash perhaps. Double check driver install and reflash. Don't worry, it can be fixed as long as you don't hit it with a hammer Try my tutorial in dev section if you want.
Greece is a good place for Optimus 3D, btw

drastic00 said:
Sounds like a bad flash perhaps. Double check driver install and reflash. Don't worry, it can be fixed as long as you don't hit it with a hammer Try my tutorial in dev section if you want.
Greece is a good place for Optimus 3D, btw
Click to expand...
Click to collapse
Thank you very much for the immediate reply.I haven't slept all night.
I have tried several times to uninstall and reinstall both the drivers and the support tool and now my phone is bricked(it doesn't open at all) since the last time when it tried to flash and stopped at 20% due to a connection problem between the pc and the phone as it wrote which can't be the case because I had double checked everything and the battery was full.
Could you please help me?I was thinking to try the Great's XBSALL's ressurection guide but I only have windows 7 64 bit and I don't know anyone with xp:/Will it work?If yes,should I do anything different than what is described in the tutorial?Thanks again

Matt_Scythe said:
Thank you very much for the immediate reply.I haven't slept all night.
I have tried several times to uninstall and reinstall both the drivers and the support tool and now my phone is bricked(it doesn't open at all) since the last time when it tried to flash and stopped at 20% due to a connection problem between the pc and the phone as it wrote which can't be the case because I had double checked everything and the battery was full.
Could you please help me?I was thinking to try the Great's XBSALL's ressurection guide but I only have windows 7 64 bit and I don't know anyone with xp:/Will it work?If yes,should I do anything different than what is described in the tutorial?Thanks again
Click to expand...
Click to collapse
You can follow this guide tested on windows 7 and windows 8 http://forum.xda-developers.com/showthread.php?t=2246001

Karim Kahale said:
You can follow this guide tested on windows 7 and windows 8 http://forum.xda-developers.com/showthread.php?t=2246001
Click to expand...
Click to collapse
Τhank you very much.I didn't notice it when you posted it earlier.I tried to do it but the problem is that at the point where the silver lg logo should appear,my screen is black an the buttons are lit.I followed it by letter and have no clue what I'm doing wrong.Could you please help me?:SThank you very much

Matt_Scythe said:
Τhank you very much.I didn't notice it when you posted it earlier.I tried to do it but the problem is that at the point where the silver lg logo should appear,my screen is black an the buttons are lit.I followed it by letter and have no clue what I'm doing wrong.Could you please help me?:SThank you very much
Click to expand...
Click to collapse
First, it would be better to post in the thread for more support
Ok, so is your phone getting recognized as fastboot device or what ?

Matt_Scythe said:
Thank you very much for the immediate reply.I haven't slept all night.
I have tried several times to uninstall and reinstall both the drivers and the support tool and now my phone is bricked(it doesn't open at all) since the last time when it tried to flash and stopped at 20% due to a connection problem between the pc and the phone as it wrote which can't be the case because I had double checked everything and the battery was full.
Could you please help me?I was thinking to try the Great's XBSALL's ressurection guide but I only have windows 7 64 bit and I don't know anyone with xp:/Will it work?If yes,should I do anything different than what is described in the tutorial?Thanks again
Click to expand...
Click to collapse
My guide uses LG Flash Tool. Also you have to run the setup before trying to use it. If flashing stopped at 20% something is probably wrong with driver setup or the .bin is corrupt (I'm not sure exactly what you did or used but it sounds like an incomplete flash). If you use my guide start over, follow it exactly, and use only the files linked. I have Win 7 x64.
Fastboot could possibly help, but you'd need to know exactly what is wrong and it's not easy to use if you don't understand command lines.

Karim Kahale said:
First, it would be better to post in the thread for more support
Ok, so is your phone getting recognized as fastboot device or what ?
Click to expand...
Click to collapse
Thank you very much.With your awesome guide I was able to restore to stock V21e after some tries.I was doing something wrong but I am not sure what:SAnyway thanks again for your precious help and guidance.Have a nice evening

drastic00 said:
My guide uses LG Flash Tool. Also you have to run the setup before trying to use it. If flashing stopped at 20% something is probably wrong with driver setup or the .bin is corrupt (I'm not sure exactly what you did or used but it sounds like an incomplete flash). If you use my guide start over, follow it exactly, and use only the files linked. I have Win 7 x64.
Fastboot could possibly help, but you'd need to know exactly what is wrong and it's not easy to use if you don't understand command lines.
Click to expand...
Click to collapse
I just finished the ressurection
My phone will eventually liveThank you very much for your help and your great guide,which I am going to try tommorow(there have been over 16 hours since I started the upgrade and all that time I am in front of my pc,so now I am in a state no different than mashed potato).
Anyway thank you very much again.I am going to post the results once I am done.There's got to be something wrong with my pc(God damn Dell) so I am going to borrow another and try again.Now that I know the process thanks to you and mr.Karim Kahale it is very easyHave a nice evening or whatever it is in your country!

Well I'm glad something worked. Basically there are ways to fix each problem, but unless something is really wrong, reflashing (i.e. starting over) usually fixes most things because it rewrites everything. It usually is not necessary but it is one thing that does work. You have a good phone because, thanks to developers here, it is unbrickable.
Next time you can get some sleep knowing it is fixable

lg p920 ics update

i have heared the ics for lg p920 was officially released
so i tried to update it using lg software update and it told me problem in communication
so i have resetted my phone and tried to recover it
now it is stuck at 4% at the recovery please help i need that ics update

When I up dated last time using LG's updater I had to try about 3 times for it to work. Here is another way...setting up can be tricky but it is more reliable once set up correctly
http://forum.xda-developers.com/showthread.php?p=39269819
Sent from my SubGenius™ LG P925 with XBSA vR3D ROM and Supercharged Slack™

drastic00 said:
When I up dated last time using LG's updater I had to try about 3 times for it to work. Here is another way...setting up can be tricky but it is more reliable once set up correctly
http://forum.xda-developers.com/showthread.php?p=39269819
Sent from my SubGenius™ LG P925 with XBSA vR3D ROM and Supercharged Slack™
Click to expand...
Click to collapse
so i have only one question is it official
you know i don't want to mess with my phone or put it a custom rom
i want it to be officially updated to ics
also every time i update it tells me emergency mode if you can please tell me how to disable it

If you don't install the rom, the v28B normal partitions .bin file is official ICS, only rooted with custom recovery. If you don't want that, instead install a .bin that is pure stock ICS. Or, there is a tutorial for installing a .kdz file using a different tool.
It all depends how you want to do it.

drastic00 said:
If you don't install the rom, the v28B normal partitions .bin file is official ICS, only rooted with custom recovery. If you don't want that, instead install a .bin that is pure stock ICS. Or, there is a tutorial for installing a .kdz file using a different tool.
It all depends how you want to do it.
Click to expand...
Click to collapse
ok well i want it official
and one more question i have lg p920 so if i installed this rom will it erase the apps like 3d gallery 3d converter 3d space ??

The v28B ICS is official + root.Stock v28B ICS has all stock apps + a root app or two. If you look at the link to XBSA rom, it will list what apps are in there. I just wrote this installation guide, not the rom. VR3D has the 3D apps. I think XBSA 8 does also, but I don't remember. Either way, having root lets you install whatever you want.
If you do it, do it carefully. And if you have 10 posts you can ask me questions over there.

Please help
Hi,
I tried today to update my p920 thru PC to ICS.
After more than ten unsuccessful tries I wanted to try from the begining but with the phone factory reseted.
After reseted my phone, it displays "not enough space. clean ...."
In settings - applications - manage aplications does not show as usualy the mb used and mb free.
In settings - SD card&phone storage settings shows total and available space for internal and esternal SD but ...
"not available" for internal storage.
What can I do?
PLEASE HELP.

What did you do to cause that?
If you are following my tutorial you missed something. Read all details.
If you installed xbsall's v28B large, you need to erase internal memory.
But I don't know what you did. Please explain.

drastic00 said:
What did you do to cause that?
If you are following my tutorial you missed something. Read all details.
If you installed xbsall's v28B large, you need to erase internal memory.
But I don't know what you did. Please explain.
Click to expand...
Click to collapse
Nothing else than I said above.
- connected the phone to pc
- started LG mobile support tool
- When showed there is an update available I pressed the red button "start Update"
- Then try and try. disconnected the usb cable and battery as the LG Support Tool requested ... still same message:"problem in conection to your phone. Even if seconds ago recognized it.Didnt get further than 40% on analizing tab.
Then the same message: "there is a problem conectic to your phone..."
- then I thought to perform a factory reset.
Pressed the tab got me to the bootloader mode where I wiped the cache and dalvik and pressed factory reset.
Pressed the Reboot tab. The phone rebooted normaly but when I tryed to download fx explorer I got the message with no enough space ....
That is all.

Ok, it sounds like possible error in flash. You might try erasing internal memory. Or redoing with LG Mobile Support tool, but I have had trouble using it. Just going from between Froyo and GB was a real pain. It took about 3 tries to get it to work, following LG's instruction exactly.
You can try my tutorial, it should be linked some posts up. It uses LG Flash Tool, not the other one. Or there are other tutorials in the General section that use other tools.
I don't use LG Mobile Support tool.

drastic00 said:
Ok, it sounds like possible error in flash. You might try erasing internal memory. Or redoing with LG Mobile Support tool, but I have had trouble using it. Just going from between Froyo and GB was a real pain. It took about 3 tries to get it to work, following LG's instruction exactly.
You can try my tutorial, it should be linked some posts up. It uses LG Flash Tool, not the other one. Or there are other tutorials in the General section that use other tools.
I don't use LG Mobile Support tool.
Click to expand...
Click to collapse
Same here ...
About 3 tries to get from froyo to GB.
Would you be so kind to tell me exactly what tutorial of yours to try?
And also what soft I need to download for pc since the phone doesnt let me to install anything.
What you mean by "erasing internal memory" ... how can I do that?
Thank you.

First I'd try Mobile Update again to see if redoing it fixes it. Then I mean go into Android system settings/storage/internal memory/erase and see if it fixes it (back up your stuff to pc first, if you can).
My tutorial for installing ICS and XBSA custom ROM with AC!D Audio mod:
http://forum.xda-developers.com/showthread.php?p=39269819

drastic00 said:
First I'd try Mobile Update again to see if redoing it fixes it. Then I mean go into Android system settings/storage/internal memory/erase and see if it fixes it (back up your stuff to pc first, if you can).
My tutorial for installing ICS and XBSA custom ROM with AC!D Audio mod:
http://forum.xda-developers.com/showthread.php?p=39269819
Click to expand...
Click to collapse
Since your last answer I tried an tried with LG mobile support.
Nothing.
From more than 40 times, on 2 times passed 40% on Analyzing TAB and it said my phone has the last software.
LAYER.
The rest of times didnt pass 40%
I tried to erase internal memory but it didnt show the tab "erase" only 0, 00 mb available.
Your tutorial seems pretty hard to me so ... maybe there is somethin I can do from CWM where it takes me after pressing "factory reset"
THANK YOU for your time.
PLEASE HELP.

Hi Guys , I got the same problem! I tried to update my phone ( P920 UK ORANGE WITH GB ) from LG Official tool, the Tool find an update for my phone but when It try to analyse my phone it stop at 40 % with a message say : PROBLEM COMMUNICATION WITH YOUR PHONE,PLEASE TRY AGAIN" Ive tried a few times WITHOUT LUCK!,
Just a quick easy question: Is finally available an Official update to ICS ? other wise is no point to go mad and try to update the phone if there is no update to ICS
Please help with some more details
Thanks
Mark

XLNCDK said:
Your tutorial seems pretty hard to me so ... maybe there is somethin I can do from CWM where it takes me after pressing "factory reset"
THANK YOU for your time.
PLEASE HELP.
Click to expand...
Click to collapse
If you don't want to learn to flash and have CWM, you could install ics by doing 1, 2 (choose 1 option in part 2) and maybe 3 here:
http://forum.xda-developers.com/showthread.php?p=39130435
I have NOT tried it that way and I don't know if it will fix your problem. Plus, if you can't use storage I don't know how you will access the .zip(s) in CWM, unless you can get to it in there somehow.
If you do ending up needing to flash, my tutorial is about as clear as you will get as far as LG Flash Tool.

claudioglasgow said:
Hi Guys , I got the same problem! I tried to update my phone ( P920 UK ORANGE WITH GB ) from LG Official tool, the Tool find an update for my phone but when It try to analyse my phone it stop at 40 % with a message say : PROBLEM COMMUNICATION WITH YOUR PHONE,PLEASE TRY AGAIN" Ive tried a few times WITHOUT LUCK!,
Just a quick easy question: Is finally available an Official update to ICS ? other wise is no point to go mad and try to update the phone if there is no update to ICS
Please help with some more details
Thanks
Mark
Click to expand...
Click to collapse
same here i want to know if there is a way to make lg tool update the phone without getting stuck in 40%
also i want to know if there is an official ics s/w released to p920

victorramy said:
same here i want to know if there is a way to make lg tool update the phone without getting stuck in 40%
also i want to know if there is an official ics s/w released to p920
Click to expand...
Click to collapse
My tutorial is linked 4 posts up but it does not use LG Update.
Sent from my SubGenius™ LG P925 with XBSA vR3D ROM and Supercharged Slack™

Official Shouyue Hero v6888 (mt6577) Stock European ROM 13052016

Stock rom with occidental google apps that cam with the 2nd gen of V6888 (The one with no logo and with the back you can remove from top right)
No Root, no Recovery, but no chinese apps: just for prople who wants to restore the phone to a clean stock rom then you can easily root and add recovery.
I had to ask a seller for it, Pandawill has only the old one with tons of china apps and no european market.
The archive contains drivers with explanation, SP Flash Tools and the folder with the rom itself.
You must use "download" function since BOOT ini will remain the older one.
Apparently this firmware saved even my camera that didn't work before.
Be careful and, anyhow, you can find the older stock rom from Pandawill easily.
Here is the UbuntuOne Link
Hero V6888.rar
Mediafire Mirror:
Hero_V6888.rar

Hello
I have download Hero V6888.rar and extracted. but i dont understand how to restore this on my phone. Where may i find explanation to do it ?
If you did it, can you explain me how to do that, please ?
and please excuse my poor english.

Would help
Zqren5 said:
Hello
I have download Hero V6888.rar and extracted. but i dont understand how to restore this on my phone. Where may i find explanation to do it ?
If you did it, can you explain me how to do that, please ?
and please excuse my poor english.
Click to expand...
Click to collapse
If DioMorgan could give a bit of a tutorial for us newbies as to how to achive this. Is Englsih playstore available (preinstalled) with this ROM ?
Thanks in advance.

Help
onlydongles said:
If DioMorgan could give a bit of a tutorial for us newbies as to how to achive this. Is Englsih playstore available (preinstalled) with this ROM ?
Thanks in advance.
Click to expand...
Click to collapse
Where are you Diomorgan? Can anyone do small tutorial for newbies, please?
Thanks

onlydongles said:
Where are you Diomorgan? Can anyone do small tutorial for newbies, please?
Thanks
Click to expand...
Click to collapse
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
http://www.youtube.com/watch?v=cdUdHejJor4
here is a video of a full tutorial that consider even the driver setup, but you don't need it if you installed snappea or PDAnet , since the MTK driver are installed by those two software.
Or just google around for the MTK6577 drivers, maybe you can find them in a standalone installer.
If you have win 7/8 remember to allow the non signed driver installation (google is your friend here too...hehehe)

Thanks DioMOrgan
I have few questions:
Will this work on an already rooted phone? (more like do I have to skip any steps so as not to root it again?)
Does this install ENglish Play store (You mentioned Occidental but was not sure of which language it might contain)
WIl this also cure the satellite and GPS problmes reported elsewhwre?
Kindly guide me.
Thanks

Hi.
How can I install that rom through Recovery Mode ?
Thanks in advance

After messing with copying play store file in system/app folder phone rebooted and wont boot. I followed Diomorgan flash tutorial, but after connecting the phone nothing happens.Didn't even asked to install any drivers or found new device.after inserting the battery phone start charging. now phone wont boot, hangs at shouyue logo.please help

Diomorgan said:
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
youtube url = "ALL new users prevented from posting outside links in their messages"
here is a video of a full tutorial that consider even the driver setup, but you don't need it if you installed snappea or PDAnet , since the MTK driver are installed by those two software.
Or just google around for the MTK6577 drivers, maybe you can find them in a standalone installer.
If you have win 7/8 remember to allow the non signed driver installation (google is your friend here too...hehehe)
Click to expand...
Click to collapse
:good: worked like a charm on my new v6888 (just received it in my mailbox and it was full in chinese stuff ,even in playstore)
thank you

Help
daf3m said:
:good: worked like a charm on my new v6888 (just received it in my mailbox and it was full in chinese stuff ,even in playstore)
thank you
Click to expand...
Click to collapse
I have the same problem as the earlier poster.
Am now stuck on the Shouyue screen. Tries factory mode and reboot, but same thing.
HELP PLEASE?
Hope i have not bricked it. (Maybe a soft brick)
If I do volume up and power button. I get the dead ANdroid with red traingle.
Please help.

I don't have the phone anymore, but as far as I remember if you got the dead android or you are stuck on logo just refla**** again.
You must press DOWNLOAD BEFORE you conbect it and remember to get the MTK drivers and install them before!
Sent from my GT-I9505G using xda premium

Hero V6888 OUT!!! :''(
Diomorgan said:
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
Click to expand...
Click to collapse
Guys are Italian and I write a little bad English: I am in a serious fix, my V6888 is corrupted.
I followed the guide you provided, only that when I came out the inscription that is missing the BOOTIMG I have posted the file "uboot_bd86_77_emmc_v6888.bin" inside the folder of ROMS and I gave the OK. I have installed everything except that now the phone stops on initial Android logo and does not go ahead, it seems to go right. What can I do to recover? I tried to redo the flash without check of BOOTIMG, installed everything again but the phone does the same defect. How do I save it? Please help!!! Thank you all and have a nice day!!!

DeejayAlex73 said:
Guys are Italian and I write a little bad English: I am in a serious fix, my V6888 is corrupted.
I followed the guide you provided, only that when I came out the inscription that is missing the BOOTIMG I have posted the file "uboot_bd86_77_emmc_v6888.bin" inside the folder of ROMS and I gave the OK. I have installed everything except that now the phone stops on initial Android logo and does not go ahead, it seems to go right. What can I do to recover? I tried to redo the flash without check of BOOTIMG, installed everything again but the phone does the same defect. How do I save it? Please help!!! Thank you all and have a nice day!!!
Click to expand...
Click to collapse
I solved it by installing Pandawull ROM first and then reinstalling this without BOOTIMG. Doing this everything was fine, now the phone works fine! Thanks all the same!!: Vittoria:

Softbrcik
Diomorgan said:
I don't have the phone anymore, but as far as I remember if you got the dead android or you are stuck on logo just refla**** again.
You must press DOWNLOAD BEFORE you conbect it and remember to get the MTK drivers and install them before!
Sent from my GT-I9505G using xda premium
Click to expand...
Click to collapse
It deosnt allow me to go forward. I tried the volume down and power button and it just comes up with the factory page where you test the hardware and reboot.(Blue screen). Doesnt give me download OR recover options. Usually yellow/green.
Even the mtk 6577 drivers are difficult to load on WIndows XP sp3. (although it says downloaded successfully). When connecting this softbricked phone, nothing happens!
Any ideas and help please?
Thanks in advance

Sorted
onlydongles said:
It deosnt allow me to go forward. I tried the volume down and power button and it just comes up with the factory page where you test the hardware and reboot.(Blue screen). Doesnt give me download OR recover options. Usually yellow/green.
Even the mtk 6577 drivers are difficult to load on WIndows XP sp3. (although it says downloaded successfully). When connecting this softbricked phone, nothing happens!
Any ideas and help please?
Thanks in advance
Click to expand...
Click to collapse
Hey Guys, finally cracked it. Had to do it in a WIndows 7 machine. Wa a bit of struggle getting all the drivers. Fially using the SP tools as suggested by Diomorgan, managed to flash the ROM and make the phone alive again.
Thank you very much Dimorgan for th time and patience in helping me/us. Really appreciated.
One question, which stock rom is this? Can I upgrade with another ROM? ANy tutorials?
Can I also upgrade to Jellybean? 4.1 or 4.2
Any suggestions ?
Thanks again.

ActuallyI don't know is coincity will port JB to the phone,but the hardware is pretty capable!
Inviato dal mio Nexus 7 con Tapatalk 4

Is there a way to install this Rom from SD card, because my port for connection to PC don't work

Which is last available rom and upgrdable for v6888
CIAO,
I have a v6888 smartphone with android 4.0.4
firmware version is BD86_77__V00_SHOUYUE_W33_V02_121122
I would know this:
- is it the last one available for this phone ?
- where could i look for ?
- can anyone tell me if there is a better rom ?
It happens also this problem: when added a SD card, after some weeks, SD card goes broken. It happened 3 times. WHAT CAN I DO TO REMOVE THIS PROBLEM ??
BYE

nobody can help me ???
ippore said:
CIAO,
I have a v6888 smartphone with android 4.0.4
firmware version is BD86_77__V00_SHOUYUE_W33_V02_121122
I would know this:
- is it the last one available for this phone ?
- where could i look for ?
- can anyone tell me if there is a better rom ?
It happens also this problem: when added a SD card, after some weeks, SD card goes broken. It happened 3 times. WHAT CAN I DO TO REMOVE THIS PROBLEM ??
BYE
Click to expand...
Click to collapse
nobody can tell me where can i find rom for this smartphone ???
there in NO site where can i find SHOUYUE SUPPORT ????
PLEASE !!!
BYE

I think so
ippore said:
nobody can tell me where can i find rom for this smartphone ???
there in NO site where can i find SHOUYUE SUPPORT ????
PLEASE !!!
BYE
Click to expand...
Click to collapse
There is not much development since last year. I just about managed the 4.0.4 for English play store and stuff.

custom rom question

Hi im just new in this kind of stuffs and i dont know where to start.
Base on others said that its better to use custom rom than miui
I am afraid that i might brick my phone thats why i afraid to do it.
Im currenty playing wild rift and so far, for the past weeks im experiencing FPS drop which is so annoying.
So whats the most stable custom rom you can recomend?
and just in case something wrong happened. can i still revert it back to miui?
any topic or thread you can link in comments would be really appreciated.
thanks

I haven't done that for long so I can't give you an accurate answer, but if you brick your phone you should be able to unbrick it using Mi FlashTool. Example here: https://www.technobuzz.net/xiaomi-unbrick-guide. I've never had completely bricked a phone even though I did take very very bad decisions. And yes custom roms are lighter than MIUI. Try to find a step by step tuto.

so where should i start?
any thread you can link?

Some will say this is outdated, but I still find it a good starting point: https://forum.xda-developers.com/t/4196271/ (especially this step-by-step guide: https://telegra.ph/How-to-install-Poco-x3-ROM-10-14; unless your preferred ROM developer tells you otherwise -- if unsure, always follow dev instructions).
After that, you could maybe proceed with the Index: https://forum.xda-developers.com/t/4176491/.

pnin said:
Some will say this is outdated, but I still find it a good starting point: https://forum.xda-developers.com/t/4196271/ (especially this step-by-step guide: https://telegra.ph/How-to-install-Poco-x3-ROM-10-14; unless your preferred ROM developer tells you otherwise -- if unsure, always follow dev instructions).
After that, you could maybe proceed with the Index: https://forum.xda-developers.com/t/4176491/.
Click to expand...
Click to collapse
thanks bud. highly appreciated

pnin said:
Some will say this is outdated, but I still find it a good starting point: https://forum.xda-developers.com/t/4196271/ (especially this step-by-step guide: https://telegra.ph/How-to-install-Poco-x3-ROM-10-14; unless your preferred ROM developer tells you otherwise -- if unsure, always follow dev instructions).
After that, you could maybe proceed with the Index: https://forum.xda-developers.com/t/4176491/.
Click to expand...
Click to collapse
btw im getting an error opening this link https://telegra.ph/How-to-install-Poco-x3-ROM-10-14
it says error 404

pakloybaloy said:
btw im getting an error opening this link https://telegra.ph/How-to-install-Poco-x3-ROM-10-14
it says error 404
Click to expand...
Click to collapse
Just tried it, works fine from here. Try a webproxy, maybe.

pakloybaloy said:
Hi im just new in this kind of stuffs and i dont know where to start.
Base on others said that its better to use custom rom than miui
I am afraid that i might brick my phone thats why i afraid to do it.
Im currenty playing wild rift and so far, for the past weeks im experiencing FPS drop which is so annoying.
So whats the most stable custom rom you can recomend?
and just in case something wrong happened. can i still revert it back to miui?
any topic or thread you can link in comments would be really appreciated.
thanks
Click to expand...
Click to collapse
custom rom don't destroy/brick your fone, its
a) wrong kernel or right kernel taken from unpopular source (telegram groups etc)
b) flashing error due to cable or otg failure!
where to start?
1. download miui unlocker, on windows pc/laptop
2. from developer option miui12, link miui account (which you must've already signed in to, )
3. don't use wifi, use 4g sim to link account in developer options
4. shutdown device and goto fastboot mode by pressing volume downd+power button for 10+ seconds untill u see fastboot and BOT
5. runn miui unlocker and attach cable, sign in to your miui account. it will verify and give you one week waiting time! , DONOT TOUCH ANYTHING IN THE SETTINGS OR MIUI ACCOUNT NOW. after one week, unlock the device (take backup before)
6. flash recovery
7. flash rom ( i would suggest RR8.0 or HAVOC) , if you want android 11, then go for Crdroid!
8. flash google apps / or nick apps IF the rom doesn't have it!
9. keep oem firmware 90mb file handy! sometimes o translate programming language the script requires latest Fw. , you can download it from xiaomifirmwaredownloader site!
10. flash magisk if you want rooted poco
11. reboot!