Jelly Bean based Micromax A110 : Install CWM Recovery and Root

Jelly Bean based Micromax A110 : Install CWM Recovery and Root - Micromax A110

Good job man. This should be made a sticky. Great guide!!

There is one dos based utility to do rooting... Simply enter option for root and finish... Is this will not work with jb??
Sent from my Micromax A110 using Tapatalk now Free
---------- Post added at 02:24 PM ---------- Previous post was at 02:18 PM ----------
This tool is binary tool for rooting... jj please confirm..
Sent from my Micromax A110 using Tapatalk now Free

ck.kislay said:
There is one dos based utility to do rooting... Simply enter option for root and finish... Is this will not work with jb??
Sent from my Micromax A110 using Tapatalk now Free
---------- Post added at 02:24 PM ---------- Previous post was at 02:18 PM ----------
This tool is binary tool for rooting... jj please confirm..
Sent from my Micromax A110 using Tapatalk now Free
Click to expand...
Click to collapse
Probably you mean to say about Bin4ary tool. That worked only with ICS. I don't know if there was an update released for it to root jelly bean on MMX A110. Anyway, This method mentioned at OP will work for rooting both ICS and Jelly Bean using the well known SP Tools which is also used for flashing STOCK ROMS.

Hi bro..
No need to mention that u spend some time in making this thread.
There will be some noobs always making threads in help and troubleshoot section to ask how to root? Thats because i think that they never used that search button to find out existing threads. If they are directed to any present thread than they are able to root easily. IN SHORT THEY ARE IN THE HABBIT OF SPOON FEEDING!
Well by the way good work buddy.:thumbup:
Nice tutorial.:thumbup:

[email protected] said:
Hi bro..
No need to mention that u spend some time in making this thread. But there are already same threads like this and think with almost equal detail.
There will be some noobs always making threads that how to root? Thats because i think that they never used that search button. If they are directed to any present thread than they are able to root easily.
Well by the way good work buddy.:thumbup:
Click to expand...
Click to collapse
Hi buddy..I mentioned those first few lines bcz sometimes it happens some ppl with typical mindset having sound knowledge ll jump in and try to show off just to avoid those rude comments I had mentioned. Agree I saw threads alike. But as u said, they weren't with clear title and instructions at op. Biggest confusion to ppl mindset was when jelly bean came out and bin4ary tool couldnt root. So thought a separate guide could be clear enough and helpful for newbies thanks for the appreciation.
Sent from my GT-I9500 using Tapatalk 4

Oh sorry bro....
I actually wanted to say something else but now I think that I had conveyed something else.
By saying "noob" i actually pointed out those persons who make threads in help and troubleshoot section for asking "how to root" and not at all you.
I referred to them when i said that they never used search button and make the same threads again and again in this hope that they will receive a link of that threads....(they always wanted to be spoon feeded)
Edited my previous post. Now it is what i actually wanted to say. Still if u feel i am one of that typical mindset person than i will delete that post.

[email protected] said:
Oh sorry bro....
I actually wanted to say something else but now I think that I had conveyed something else.
By saying "noob" i actually pointed out those persons who make threads in help and troubleshoot section for asking "how to root" and not at all you.
I referred to them when i said that they never used search button and make the same threads again and again in this hope that they will receive a link of that threads....(they always wanted to be spoon feeded)
Edited my previous post. Now it is what i actually wanted to say. Still if u feel i am one of that typical mindset person than i will delete that post.
Click to expand...
Click to collapse
Hey common brother you need not be sorry , its just a misunderstanding i didn't mean the last reply for you mate. It was in general bcz i noticed these happening here and there in our mtk community threads IT WASN'T FOR U JATIN BUDDY

my volume key is not working
hi... my volume (-) key is not working... is there any other method to go in recovery menu?

Praveen
can u please sugest me for canvas a111 actually canvas a111 dont have any scatter file na how can i install in canvas a111 please help me
==vj== said:
Before someone fires me with questions like what's new in this, i would like to confront that I know this guide is delayed to post as on date. But having noticed there are many ppl even today still with questions about how to root Jelly Bean based MMX A110. Thought of posting this guide for those people.
Dear Visitors, Please Thank the links (XDA links) on click that i mentioned below for downloads.
Disclaimer: Rooting voids your warranty. Neither ME nor XDA will be held responsible for bricking your phone. Use at your own risk.
Downloads1. SP Tools & VCOM Drivers
2. Micromax A110 drivers
3. CWM Recovery 6.0.3.3
4. MT6577_Android_scatter_emmc.txt
5. 7-zip
6. SuperSU-v1.04.zip
Install CWM Recovery1. Extract MT6577_Android_scatter_emmc.zip, CWM Recovery to some path say C:\MMX\Update folder. Note: Extracted recovery must appear with filename as "recovery" mandatorily.
2. Extract SP Tools.7z with 7-zip software and locate to some path say C:\MMX\SPTOOL folder
3. Install VCOM and Micromax A110 aka Cynus Drivers.
4. Run Flash Tool.exe from extracted folder. Click Scatter-loading button and locate to the path C:\MMX\Update folder and select MT6577_Android_scatter_emmc.txt
5. Check the box RECOVERY only and Uncheck everything else.
6. Turn off your phone, Reinsert battery but don't plug in to pc now.
7. Click the Download(F9) button
8. Plug your phone (Turn off condition only) and it may ask some additional verification steps like install unsigned driver in Windows 7/8. Simply click yes install unsigned driver and wait.
9. You will see some msgs like Preloader bla bla. Just wait until you see OK button displayed on screen.
At this point CWM Recovery is installed. Click OK and disconnect your phone.
To enter Recovery: Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu
RootingTwo ways possible.
1. Either install some Custom ROM which obviously will be pre rooted.
OR
2. Place the downloaded SuperSU-v1.04.zip in Internal or External SD. Goto CWM Recovery. Choose option Install from SD card and browse to SuperSU-v1.04.zip You will get message as installation complete. Reboot your phone. Done..!!!
Credits : @icoolguy1995 @Dark4Droid @droidiser
Click to expand...
Click to collapse

Recovery mode
Thanks for the detailed post. Can you please tell me at which point exactly I should enter into recover mode I mean to ask when do I do the following ?
" Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu"
==vj== said:
Before someone fires me with questions like what's new in this, i would like to confront that I know this guide is delayed to post as on date. But having noticed there are many ppl even today still with questions about how to root Jelly Bean based MMX A110. Thought of posting this guide for those people.
Dear Visitors, Please Thank the links (XDA links) on click that i mentioned below for downloads.
Disclaimer: Rooting voids your warranty. Neither ME nor XDA will be held responsible for bricking your phone. Use at your own risk.
Downloads1. SP Tools & VCOM Drivers
2. Micromax A110 drivers
3. CWM Recovery 6.0.3.3
4. MT6577_Android_scatter_emmc.txt
5. 7-zip
6. SuperSU-v1.04.zip
Install CWM Recovery1. Extract MT6577_Android_scatter_emmc.zip, CWM Recovery to some path say C:\MMX\Update folder. Note: Extracted recovery must appear with filename as "recovery" mandatorily.
2. Extract SP Tools.7z with 7-zip software and locate to some path say C:\MMX\SPTOOL folder
3. Install VCOM and Micromax A110 aka Cynus Drivers.
4. Run Flash Tool.exe from extracted folder. Click Scatter-loading button and locate to the path C:\MMX\Update folder and select MT6577_Android_scatter_emmc.txt
5. Check the box RECOVERY only and Uncheck everything else.
6. Turn off your phone, Reinsert battery but don't plug in to pc now.
7. Click the Download(F9) button
8. Plug your phone (Turn off condition only) and it may ask some additional verification steps like install unsigned driver in Windows 7/8. Simply click yes install unsigned driver and wait.
9. You will see some msgs like Preloader bla bla. Just wait until you see OK button displayed on screen.
At this point CWM Recovery is installed. Click OK and disconnect your phone.
To enter Recovery: Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu
RootingTwo ways possible.
1. Either install some Custom ROM which obviously will be pre rooted.
OR
2. Place the downloaded SuperSU-v1.04.zip in Internal or External SD. Goto CWM Recovery. Choose option Install from SD card and browse to SuperSU-v1.04.zip You will get message as installation complete. Reboot your phone. Done..!!!
Credits : @icoolguy1995 @Dark4Droid @droidiser
Click to expand...
Click to collapse

Related

Root and CWM for byond mi book mi3-xda(added new theme)(20.02.2013)

I have a rooting tutorial for MI-BOOK MI3 tab,it can be useful for many other device as well...
Just go through the process....
ROOTING
Downloads
1) download the Rooting software from the following link:-
http://www.sendspace.com/file/d92i2b
2) ADB drivers
View attachment ADB.rar
----------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO ROOT
1) Now first you have to downloaded the UnlockRoot exe file.Then install it. It will take some time to install."most important thing - disable your antivirus system "
now Close the application after installing it.
2) ADB drivers are required to make sure that your PC can detects your tablet.
extract the "ADB .rar" file and run "adb.exe".it will install your adb drivers..
Make sure you have enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Now connect it with your computer...AND DON'T TURN ON THE STORAGE MODE..
Rooting:
Now finally open the UnlockRoot application. The interface will look like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)Now click the big green ROOT button and it will ask you that "your device is already rooted.do you want to root it again?" simply click on yes...
now wait for few minutes it will gives you a confirmation ...
And it will shut down your tab.now disconnect it from your computer and turn it on.
Congratulations!! You have Rooted successfully. :highfive:
after that please go to play store and install the busybox. it will help you to enjoy the full benefits of rooting.. :angel:
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM
steps are bellow -(it will not replace your stock recovery it will run on top of it )
1.Download the CWM zip from here - ( View attachment CWM.zip.zip ) and put it on your internal sd-card.
2.Now Power off your device.
3.Hold the volume down and the power on button together.(now you will see a droid pic on your device )
4.Press the volume down button again to see and scroll through the CWM.
(Navigation-through volume down button & Execution-through volume up button)
5.Navigate to "apply update from /nand" and execute it by pressing volume up button.
6.Navigate to CWM zip,and execute it by pressing volume up button.
7.Now you CWM-based Recovery will comes up on your screen.
(Navigation-through volume down and volume up button & Execution-through power button)
:highfive:
here is the Screen Shoot -
Now do one thing first backup your stock rom through "backup and restore" option. :angel:
and then you are ready for customization...
More things are coming soon.. :highfive:
------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits -
1.credits for CWM goes to XDA user Dengabhi.
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Now I'm uploading the ROM DUMP.
If anything goes wrong with your device through this you can restore it to stock.
and one more thing i have included the Root access with this ROM DUMP.
if you want to Unroot it just go through the Rooting process and select Unroot.
here is the link -
http://www.sendspace.com/file/asmmv9
steps -
1.after downloading the above zip extract it.
2.you will get a folder called "clockworkmod' now place it to your inbuilt sdcard.
3.boot into recovery mod and flash the CWM zip for mi3 tab.
4.now make a data wipe and clear cache.
5.now go to backup and restore and restore it.
now you are done........
------------------------------------------------------------------------------------------------------------------------------------------------------------
FOR THEMING VISIT MY NEW THREAD-
http://forum.xda-developers.com/showthread.php?p=38216978#post38216978
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU LIKE THIS POST, PLEASE HIT THE THANKS......
<<<<<<===============

Review plzz
Hey can u plz provide a review of this tab with benchmark scores and all??

ChiragK said:
Hey can u plz provide a review of this tab with benchmark scores and all??
Click to expand...
Click to collapse
@Chirag:
ya sure...
tomorrow i will post it...with all benchmark scores...
I'm using it for more than a week...and i can suggest you one thing it's really very good product according to the price ...

@ Chirag:
SaM-RoN said:
@Chirag:
ya sure...
tomorrow i will post it...with all benchmark scores...
I'm using it for more than a week...and i can suggest you one thing it's really very good product according to the price ...
Click to expand...
Click to collapse
here it is....just bellow I'm providing all the benchmark scores with SS....you can give a look into it... :angel:
i think it will be help-full for you....
and please don't get confused with the colors of those SS...it's showing swapped because of the screen shoot app i have used. .....
every thing is working perfectly with this device....and display quality is really very good.. :good:
only the camera quality is not very good for indoor photography...
and i want to mention one more thing about the betray,if you play games continuously for more than 2 hours then you should carry the charger with you....

SaM-RoN said:
here it is....just bellow I'm providing all the benchmark scores with SS....you can give a look into it... :angel:
i think it will be help-full for you....
and please don't get confused with the colors of those SS...it's showing swapped because of the screen shoot app i have used. .....
every thing is working perfectly with this device....and display quality is really very good.. :good:
only the camera quality is not very good for indoor photography...
and i want to mention one more thing about the betray,if you play games continuously for more than 2 hours then you should carry the charger with you....
Click to expand...
Click to collapse
i bought it too .. its really nice :good:

ChiragK said:
i bought it too .. its really nice :good:
Click to expand...
Click to collapse
I'm really very glad to help you...
and I'm sure that you will enjoy it a lot .... :highfive:

Any methods for Mi-book MI2?
SaM-RoN said:
I'm really very glad to help you...
and I'm sure that you will enjoy it a lot .... :highfive:
Click to expand...
Click to collapse
Hi, it's good to know that there's way too root mibook tablets. Does this apply to other mibook tablets too? If not, can you help me with rooting and finding the right ROM for MI2?

sabergeek said:
Hi, it's good to know that there's way too root mibook tablets. Does this apply to other mibook tablets too? If not, can you help me with rooting and finding the right ROM for MI2?
Click to expand...
Click to collapse
you can try with this same process.....surely this process will work with MI2 as-well....i haven't tried yet....
try to do it.....if any error occurred then please let me know.

Nice
Thank you.
I rooted my mi3 tab successfully with this method.
I read someplace that our mi3 contains Allwinner A10 processor
Now there is a jellybean rom [CM10 4.1.1] available for tablets with this processor.
But a compatibility pack is required to be flashed for the touchscreen to work after flashin this rom.
Can this rom be installed? Can any developer please try this and confirm?
http://forum.xda-developers.com/showthread.php?t=1821398

djsanta said:
Thank you.
I rooted my mi3 tab successfully with this method.
I read someplace that our mi3 contains Allwinner A10 processor
Now there is a jellybean rom [CM10 4.1.1] available for tablets with this processor.
But a compatibility pack is required to be flashed for the touchscreen to work after flashin this rom.
Can this rom be installed? Can any developer please try this and confirm?
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
mibook mi3 is not based on allwinner chip. it has a telechip TCC 892x processor. its a rebranded turkish product called Dark Evopad T7000. visit www.dark.com.tr to see the original tab. dont attempt to flash allwinner based ROM....u will brick your tablet. you may install CWm recovery for this tab. search for my post for details.

sabergeek said:
Hi, it's good to know that there's way too root mibook tablets. Does this apply to other mibook tablets too? If not, can you help me with rooting and finding the right ROM for MI2?
Click to expand...
Click to collapse
Yes. This method is applicable for MI 1/2/3/5 etc tablets. you can try it without any fear. just be sure that you have the right drivers installed. drivers for your tab will get installed the moment you plug it in you PC. If it dosen't install pdanet app on your phone and on ur PC and connect your tab to the PC. Run pdanet...it will automatically install the correct drivers for your tab.

Dengabhi said:
mibook mi3 is not based on allwinner chip. it has a telechip TCC 892x processor. its a rebranded turkish product called Dark Evopad T7000. dont attempt to flash allwinner based ROM....u will brick your tablet. you may install CWm recovery for this tab. search for my post for details.
Click to expand...
Click to collapse
Thank u.
If not for your post I would have probably flashed an allwinner rom and bricked my tab.

exactly you are right.

SaM-RoN said:
I have a rooting tutorial for MI-BOOK MI3 tab,it can be useful for many other device as well...
Just go through the process....
ROOTING
Downloads
1) download the Rooting software from the following link:-
http://www.sendspace.com/file/d92i2b
2) ADB drivers
View attachment 1484720
----------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO ROOT
1) Now first you have to downloaded the UnlockRoot exe file.Then install it. It will take some time to install."most important thing - disable your antivirus system "
now Close the application after installing it.
2) ADB drivers are required to make sure that your PC can detects your tablet.
extract the "ADB .rar" file and run "adb.exe".it will install your adb drivers..
Make sure you have enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Now connect it with your computer...AND DON'T TURN ON THE STORAGE MODE..
Rooting:
Now finally open the UnlockRoot application. The interface will look like this.
2)Now click the big green ROOT button and it will ask you that "your device is already rooted.do you want to root it again?" simply click on yes...
now wait for few minutes it will gives you a confirmation ...
And it will shut down your tab.now disconnect it from your computer and turn it on.
Congratulations!! You have Rooted successfully. :highfive:
after that please go to play store and install the busybox. it will help you to enjoy the full benefits of rooting.. :angel:
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM
steps are bellow -(it will not replace your stock recovery it will run on top of it )
1.Download the CWM zip from here - ( View attachment 1630706 ) and put it on your internal sd-card.
2.Now Power off your device.
3.Hold the volume down and the power on button together.(now you will see a droid pic on your device )
4.Press the volume down button again to see and scroll through the CWM.
(Navigation-through volume down button & Execution-through volume up button)
5.Navigate to "apply update from /nand" and execute it by pressing volume up button.
6.Navigate to CWM zip,and execute it by pressing volume up button.
7.Now you CWM-based Recovery will comes up on your screen.
(Navigation-through volume down and volume up button & Execution-through power button)
:highfive:
here is the Screen Shoot -
Now do one thing first backup your stock rom through "backup and restore" option. :angel:
and then you are ready for customization...
More things are coming soon.. :highfive:
------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits -
1.credits for CWM goes to XDA user Dengabhi.
------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU LIKE THIS POST, PLEASE HIT THE THANKS......
<<<<<<===============
Click to expand...
Click to collapse
MY FRIEND : Check my post for credits. Also included ROM Dump.

Dengabhi said:
MY FRIEND : Check my post for credits. Also included ROM Dump.
Click to expand...
Click to collapse
yap,its ok......now we should try for some customization....

I have an T7000!
Dengabhi said:
mibook mi3 is not based on allwinner chip. it has a telechip TCC 892x processor. its a rebranded turkish product called Dark Evopad T7000. visit "URL" to see the original tab. dont attempt to flash allwinner based ROM....u will brick your tablet. you may install CWm recovery for this tab. search for my post for details.
Click to expand...
Click to collapse
hey,i have an t7000. does mibook m3 and this t7000 is the same device?Because i cant find any roms or cwms for device.Also can i use this cwm on my t7000?
thanks
cizkek_

cizkek_ said:
hey,i have an t7000. does mibook m3 and this t7000 is the same device?Because i cant find any roms or cwms for device.Also can i use this cwm on my t7000?
thanks
cizkek_
Click to expand...
Click to collapse
yes bro those are exactly same device...mod's for mi3 will work on T7000 as well.

thanks!
SaM-RoN said:
yes bro those are exactly same device...mod's for mi3 will work on T7000 as well.
Click to expand...
Click to collapse
Hell yeah. Thank you for your answer. Now i can finally make some modifications (if they re existing )

To root Byond mi book mi10, use this program: http://downloadcdn.betterinstaller.com/installers/9/9/UnlockRoot_downloader_by_UnlockRoot.exe. Link provided by OP. Just posting it here so people like me dont't have to search around!
so thank OP not me.

Mi book mi3 ROM
SaM-RoN said:
I have a rooting tutorial for MI-BOOK MI3 tab,it can be useful for many other device as well...
Just go through the process....
ROOTING
Downloads
1) download the Rooting software from the following link:-
http://www.sendspace.com/file/d92i2b
2) ADB drivers
View attachment 1484720
----------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO ROOT
1) Now first you have to downloaded the UnlockRoot exe file.Then install it. It will take some time to install."most important thing - disable your antivirus system "
now Close the application after installing it.
2) ADB drivers are required to make sure that your PC can detects your tablet.
extract the "ADB .rar" file and run "adb.exe".it will install your adb drivers..
Make sure you have enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Now connect it with your computer...AND DON'T TURN ON THE STORAGE MODE..
Rooting:
Now finally open the UnlockRoot application. The interface will look like this.
2)Now click the big green ROOT button and it will ask you that "your device is already rooted.do you want to root it again?" simply click on yes...
now wait for few minutes it will gives you a confirmation ...
And it will shut down your tab.now disconnect it from your computer and turn it on.
Congratulations!! You have Rooted successfully. :highfive:
after that please go to play store and install the busybox. it will help you to enjoy the full benefits of rooting.. :angel:
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM
steps are bellow -(it will not replace your stock recovery it will run on top of it )
1.Download the CWM zip from here - ( View attachment 1630706 ) and put it on your internal sd-card.
2.Now Power off your device.
3.Hold the volume down and the power on button together.(now you will see a droid pic on your device )
4.Press the volume down button again to see and scroll through the CWM.
(Navigation-through volume down button & Execution-through volume up button)
5.Navigate to "apply update from /nand" and execute it by pressing volume up button.
6.Navigate to CWM zip,and execute it by pressing volume up button.
7.Now you CWM-based Recovery will comes up on your screen.
(Navigation-through volume down and volume up button & Execution-through power button)
:highfive:
here is the Screen Shoot -
Now do one thing first backup your stock rom through "backup and restore" option. :angel:
and then you are ready for customization...
More things are coming soon.. :highfive:
------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits -
1.credits for CWM goes to XDA user Dengabhi.
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Now I'm uploading the ROM DUMP.
If anything goes wrong with your device through this you can restore it to stock.
and one more thing i have included the Root access with this ROM DUMP.
if you want to Unroot it just go through the Rooting process and select Unroot.
here is the link -
http://www.sendspace.com/file/asmmv9
steps -
1.after downloading the above zip extract it.
2.you will get a folder called "clockworkmod' now place it to your inbuilt sdcard.
3.boot into recovery mod and flash the CWM zip for mi3 tab.
4.now make a data wipe and clear cache.
5.now go to backup and restore and restore it.
now you are done........
------------------------------------------------------------------------------------------------------------------------------------------------------------
FOR THEMING VISIT MY NEW THREAD-
http://forum.xda-developers.com/showthread.php?p=38216978#post38216978
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU LIKE THIS POST, PLEASE HIT THE THANKS......
<<<<<<===============
Click to expand...
Click to collapse
Bro, I was wondering whether u still happen to have that stock ROM for mi3 with you. The links not working, file requested not available, it says.

Cherry mobile Omega HD (i-mobile IQ6)

Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
rooted
init.d
signal tweaks
3g tweaks
battery tweaks
gpu rendering
dns tweaks
media tweaks
v6 supercharger
kickasskernel
crossbreeder
reorganized build.prop file
uploading
http://www.4shared.com/folder/dJXI2ODd/_online.html
try open first in case of corrupt file
remove crossbreeder for much better battery
flash uninstall zip http://forum.xda-developers.com/showthread.php?t=2113150
and underclock for much longer battery download setcpu or no frillcpu or anything u want i dnt care..
save rom in SD card
reboot to CWM/TWRP
install rom via SD card
reboot
I'm not responsible for any loss of data or brick....
i think this only works on iq6A

do you already own this phone?

Cherry mobile Omega HD info states that its a dual core phone while all info about i-mobile IQ6 states its a single core phone. does anyone know which mediatek chipset the Omega HD uses? It's GPU?

yes i had it

How?
How can we flash the CWM to the Omega HD if you don't even give us a flashtool? Is this Rooting process tested? is it working?

Please help me
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
Sir, can I have a copy of the Setting.apk of your Cherry Mobile HD? i've accidentally forgot to have a backup of it and now, i've accidentally just erased it. please help me. thankyou very much

Pretty Please?
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
please post the Settings.apk of the Cherry Mobile Omega HD sir. I really need it it would be appreciated if you post it here.

How to Backup the phone
just bought the phone yesterday
do yo guys know how to back up this jellybean phone?

Hey guys, if you have FB we have a group with most of oHD users. Just search "CherryMobileOmegaHD" in FB (can't post links yet. sorry)
There are custom roms in the group, the usual rom cooked from dsdixda's kitchen (zipalign, deodexed, rm bloatwares)
@cyzarine
What do you mean with backup? We have the stock rom in the group, you might want to check it out.

Bummer! I'm stuck at step 3!
You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
Click to expand...
Click to collapse
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!

anyone have a kernel that have oc"?

In need...
Woke up to a drained Omega HD today.
Plugged it in to have it charged.
Switched it on afterwards.
"OmegaHD" flashed before my eyes, followed by a blank screen with the familiar Cherry Mobile tune playing on the background. And then nothing! NO DISPLAY! I touch the screen and there are sounds playing to confirm each press, which means I am pressing on the right places -- only that there is NO DISPLAY APPEARING.
I switch it on and off, still the same results.
Wiped cache. Nothing... Since it's practically new, I go ahead and factory-restore the thing... still the same results. NO DISPLAY! :-S
What else can I do to this device to have it work properly?!

Have you installed any custom rom or any other zip files with your phone?

xMinistro said:
Have you installed any custom rom or any other zip files with your phone?
Click to expand...
Click to collapse
do have stock rom can you give plsss......

---------- Post added at 11:02 PM ---------- Previous post was at 10:41 PM ----------
[/COLOR]
Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
Click to expand...
Click to collapse
Hi. Can you please post a mirror on the twrp-omegahd.img file? All of the other files have been downloaded except for the img file. Error comes up.

bakes5981 said:
Bummer! I'm stuck at step 3!
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!
Click to expand...
Click to collapse
please hit thanks if this helps

OmegaXtremeHD link issues
OmegaXtremeHD link is not working .... 509 error .... any mirror or alternative links?

Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
init.d
signal tweaks
3g tweaks
battery tweaks
v6 supercharger
kickasskernel
crossbreeder
download link
https://www.dropbox.com/s/8q1c6db45uegepk/OmegaXtreme.zip
updated link
save rom in SD card
reboot to CWM/TWRP
WIPE DATA/FACTORY RESET
install rom via SD card
reboot
Click to expand...
Click to collapse
Hey buddy,
Where's the file..??

StanleyD said:
Hey buddy,
Where's the file..??
Click to expand...
Click to collapse
will update link later

having trouble with some apps working on my Omega HD. a couple of my Android mainstays are Haxsync and Swiftkey. on my Omega HD, they run no problem, but if the unit powers off for whatever reason, when I turn it back on, my Haxsync account (under Settings/Accounts) disappears, requiring me to set up the app again, and Swiftkey is no longer activated as my default input. any help?

ClocworkMod recovery for XOLO A500

Hi,
XDA world....Another post by me for XOLO A500 users.
This post will help you to install Clockworkmod recovery on your xolo a500.
First and the foremost thing you need is a rooted device.If you haven't rooted your device please root it. Refer the following link on how to root your lava xolo a500.
http://forum.xda-developers.com/showthread.php?p=39358817
Now download the XOLO A500 CWM Toolkit from download link given in the last.
1.) Extract the rar file to a folder anywhere on your computer.
2.) Open the folder and press shift key and right click(holding down the shift key) anywhere on the blank space of the screen and select "Open Command window here".
3.) You will see a command prompt window on the screen.
4.) Now connect your device via usb cable and enable usb debugging(Settings->Development->USB Debugging )
5.) Now Download the Quick Boot App from play store & install it in your Mobile. Open that App & click on Bootloader option.
6.) After sometime your phone will get stuck at the logo. (don’t panic)
7.) Now type on the cmd window:
fastboot devices(press enter)
fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery on you Xolo A500
So Enjoy, you have successfully installed CWM Recovery on your Xolo A500..
Now you can check whether your CWM is working or not:-
---Remove battery of your phone and reinsert.
---Press Power and Volume down key to boot into recovery mode.
Congrats, You have successfully installed Cwm 6 in your Lava A500
But there is a bug in this recovery that is not yet fixed. The bug is that when you boot your device into recovery mode the user language is Chinese...But not to worry...
Ignore the recovery mode...
Go to play store and download ROM Manager by clockworkmod.It has all the features which the recovery menu should be having.
1.) Open ROM Manager
2.) Go to Install Clockworkmod recovery.
3.) Scroll down to the last and you will see Device not listed option.Open it.
4.) A prompt will come.Press yes. And then choose option 3.x+ option.
And now you are ready to use your CWM Recovery on ROM Manager.

Problem with installing CWM
Hi
Problem with installing CWM on my XOLO A500. When I Click quickboot booloader option it shows up an android logo with text “DOWNLOADING.. PLEASE DONT TURN OFF THE TARGET”
and hangs. Please HELP ASAP. THANKS

dhruba.sarma said:
Hi
Problem with installing CWM on my XOLO A500. When I Click quickboot booloader option it shows up an android logo with text “DOWNLOADING.. PLEASE DONT TURN OFF THE TARGET”
and hangs. Please HELP ASAP. THANKS
Click to expand...
Click to collapse
I have clearly mentioned that when you press bootloader option
DOWNLOADING.. PLEASE DONT TURN OFF THE TARGET
Click to expand...
Click to collapse
will appear.
As soon as you see this screen just type on the cmd window:
fastboot devices(press enter)
fastboot flash recovery recovery.img
This will successfully install CWM recovery.
Remove battery of your phone and reinsert.
---Press Power and Volume down(Please donot press volume up button) key to boot into recovery mode.

I'm unable to open command window through pressing the "Shift key+Right click" . Do yu have any vedio tutorial. Help me,..

Answer to your question.
GauravBak said:
I'm unable to open command window through pressing the "Shift key+Right click" . Do yu have any vedio tutorial. Help me,..
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope it helped you.
If I helped Please Hit Thanks.

but when i type the word "fastboot devices" then press enter and after that i type "fastboot flash recovery recovery.img" and enter, it says waiting for device.. nothing happen,..!
I'm using windows-xp

same problem.. stuck at waiting for devices on the cmd prompt. My device is already connected to pc and usb debugging mode is on

HELP,...

Procedure TO Install NEW ROM on XOLO A500
GauravBak said:
Plz buddy give me a tutorial about how to flash a ROM in my XOLO A500, I have installed CWM+ROM Manager and have TBMk5 ROM.zip in my SD card, a picture tutorial is very helpful.
Click to expand...
Click to collapse
Procedure TO Install NEW ROM on XOLO A500
1 First go to Cwm recovery by pressing power+volume down (-) key
2 then wipe data/factory reset
3 wipe cache partition
4 go to "advanced"
5 & wipe dalvik cache & wipe battery stats
6 then go back
7 & select 2nd option install zip from sd card & locate the zip ,,,, then follow the procedure & u will get new rom installation by aroma installer
8 then reboot system & wait beacause initialisation takes few minutes ... enjoy!!! reboot is necessary
NOTE:- for selecting any option press power key & to scroll by volume keys
,, check sd card is mounted or not ,, if not mount by "mounts and storage" option
please hit thanks as it helped you..
for any query visit my account or just reply:good::good:

Recovery Mode not opening..
Hii..
I have installed cwm on my phone..
but now i am not able to open the recovery mode by pressing volume up+power..:crying::crying::crying:
i tried both volume up & down with Power key combination..!!
so plz help me n tell me how to get back my original recovery mode..!!
ThanXX a Lot In AdvAnce..!!

its in chinese dude
the recovery menu is in chinese ......pls help

thanks
I read and review this , thanks.

thanx alot for helping

problems while flashing cwm.. plz help
Ishan16 said:
Hi,
XDA world....Another post by me for XOLO A500 users.
This post will help you to install Clockworkmod recovery on your xolo a500.
First and the foremost thing you need is a rooted device.If you haven't rooted your device please root it. Refer the following link on how to root your lava xolo a500.
http://forum.xda-developers.com/showthread.php?p=39358817
Now download the XOLO A500 CWM Toolkit from download link given in the last.
1.) Extract the rar file to a folder anywhere on your computer.
2.) Open the folder and press shift key and right click(holding down the shift key) anywhere on the blank space of the screen and select "Open Command window here".
3.) You will see a command prompt window on the screen.
4.) Now connect your device via usb cable and enable usb debugging(Settings->Development->USB Debugging )
5.) Now Download the Quick Boot App from play store & install it in your Mobile. Open that App & click on Bootloader option.
6.) After sometime your phone will get stuck at the logo. (don’t panic)
7.) Now type on the cmd window:
fastboot devices(press enter)
fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery on you Xolo A500
So Enjoy, you have successfully installed CWM Recovery on your Xolo A500..
Now you can check whether your CWM is working or not:-
---Remove battery of your phone and reinsert.
---Press Power and Volume down key to boot into recovery mode.
Congrats, You have successfully installed Cwm 6 in your Lava A500
But there is a bug in this recovery that is not yet fixed. The bug is that when you boot your device into recovery mode the user language is Chinese...But not to worry...
Ignore the recovery mode...
Go to play store and download ROM Manager by clockworkmod.It has all the features which the recovery menu should be having.
1.) Open ROM Manager
2.) Go to Install Clockworkmod recovery.
3.) Scroll down to the last and you will see Device not listed option.Open it.
4.) A prompt will come.Press yes. And then choose option 3.x+ option.
And now you are ready to use your CWM Recovery on ROM Manager.
Click to expand...
Click to collapse
the message showing on phone screen is "partition 'recovery' not support flash"...
plz tell how to fix it...

I have the perfectly working English cwm image
Sent from my A500 using XDA Premium 4 mobile app

same problem.. stuck at waiting for devices on the cmd prompt.

Ishan16 said:
I have clearly mentioned that when you press bootloader option will appear.
As soon as you see this screen just type on the cmd window:
fastboot devices(press enter)
fastboot flash recovery recovery.img
This will successfully install CWM recovery.
Remove battery of your phone and reinsert.
---Press Power and Volume down(Please donot press volume up button) key to boot into recovery mode.
Click to expand...
Click to collapse
What to do after pressing power + volume down button as further it is chineese menu.
Please reply
---------- Post added at 06:40 AM ---------- Previous post was at 06:04 AM ----------
Ishan16 said:
Hi,
XDA world....Another post by me for XOLO A500 users.
This post will help you to install Clockworkmod recovery on your xolo a500.
First and the foremost thing you need is a rooted device.If you haven't rooted your device please root it. Refer the following link on how to root your lava xolo a500.
http://forum.xda-developers.com/showthread.php?p=39358817
Now download the XOLO A500 CWM Toolkit from download link given in the last.
1.) Extract the rar file to a folder anywhere on your computer.
2.) Open the folder and press shift key and right click(holding down the shift key) anywhere on the blank space of the screen and select "Open Command window here".
3.) You will see a command prompt window on the screen.
4.) Now connect your device via usb cable and enable usb debugging(Settings->Development->USB Debugging )
5.) Now Download the Quick Boot App from play store & install it in your Mobile. Open that App & click on Bootloader option.
6.) After sometime your phone will get stuck at the logo. (don’t panic)
7.) Now type on the cmd window:
fastboot devices(press enter)
fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery on you Xolo A500
So Enjoy, you have successfully installed CWM Recovery on your Xolo A500..
Now you can check whether your CWM is working or not:-
YOU JUST TELL ME HOW DO I GET MY ORIGINAL RECOVERY MENU BACK COZ IM GETTING VERY ANGRY NOW WITH THE CHINESE MENU. I DONT WANT ANY OTHER HELP.
PLEASE REPLY FAST.
---Remove battery of your phone and reinsert.
---Press Power and Volume down key to boot into recovery mode.
Congrats, You have successfully installed Cwm 6 in your Lava A500
But there is a bug in this recovery that is not yet fixed. The bug is that when you boot your device into recovery mode the user language is Chinese...But not to worry...
Ignore the recovery mode...
Go to play store and download ROM Manager by clockworkmod.It has all the features which the recovery menu should be having.
1.) Open ROM Manager
2.) Go to Install Clockworkmod recovery.
3.) Scroll down to the last and you will see Device not listed option.Open it.
4.) A prompt will come.Press yes. And then choose option 3.x+ option.
And now you are ready to use your CWM Recovery on ROM Manager.
Click to expand...
Click to collapse
JUST TELL ME HOW DO I GET MY NORMAL RECOVERY MENU BACK WITH ENGLISH COZ I AM VERY ANGRY NOW AND HATE THAT CHINESE MENU.REPLY FAST HOW TO GET RID OF THAT.

Sorry for the inconvenience caused.
Hey guys sorry for my late reply.
Those of you who are having problem in "Waiting for Device" please check that you have correctly installed adb drivers on your pc.
Still if you want you can try "Adb driver installer".
For the chinese menu issue please follow the below post by me.
http://forum.xda-developers.com/showthread.php?t=2349045
Press thanks if I helped.

Every thing went well still hadn't got CWM recovery
Ishan16 said:
Hi,
XDA world....Another post by me for XOLO A500 users.
This post will help you to install Clockworkmod recovery on your xolo a500.
First and the foremost thing you need is a rooted device.If you haven't rooted your device please root it. Refer the following link on how to root your lava xolo a500.
http://forum.xda-developers.com/showthread.php?p=39358817
Now download the XOLO A500 CWM Toolkit from download link given in the last.
1.) Extract the rar file to a folder anywhere on your computer.
2.) Open the folder and press shift key and right click(holding down the shift key) anywhere on the blank space of the screen and select "Open Command window here".
3.) You will see a command prompt window on the screen.
4.) Now connect your device via usb cable and enable usb debugging(Settings->Development->USB Debugging )
5.) Now Download the Quick Boot App from play store & install it in your Mobile. Open that App & click on Bootloader option.
6.) After sometime your phone will get stuck at the logo. (don’t panic)
7.) Now type on the cmd window:
fastboot devices(press enter)
fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery on you Xolo A500
So Enjoy, you have successfully installed CWM Recovery on your Xolo A500..
Now you can check whether your CWM is working or not:-
---Remove battery of your phone and reinsert.
---Press Power and Volume down key to boot into recovery mode.
Congrats, You have successfully installed Cwm 6 in your Lava A500
But there is a bug in this recovery that is not yet fixed. The bug is that when you boot your device into recovery mode the user language is Chinese...But not to worry...
Ignore the recovery mode...
Go to play store and download ROM Manager by clockworkmod.It has all the features which the recovery menu should be having.
1.) Open ROM Manager
2.) Go to Install Clockworkmod recovery.
3.) Scroll down to the last and you will see Device not listed option.Open it.
4.) A prompt will come.Press yes. And then choose option 3.x+ option.
And now you are ready to use your CWM Recovery on ROM Manager.
Click to expand...
Click to collapse
Every thing went well even I saw Chinese recovery but now when I switch into recovery shows me android recovery instead of CWM recovery

For English recovery please follow the link given above your post.
Sent from my HTC Desire 310 dual sim

[ Auxus Nuclea N1 ] - All Things Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specs
[*]Google it before posting here.
[*]Please post any guides and/or tutorials directly onto the forum, rather than links, otherwise this thread will be closed by the Moderator.
Click to expand...
Click to collapse
Rooting for 8GB Version
Procedure:
1. Download the Framaroot application and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
[ROMs]
Please do not flash the firmware that is not meant for your phone. Flash only 4gb to 4gb and 8Gb to 8Gb
Auxus Nuclea N1 Stock Firmware
NEW
Final Version - 11-Dec-2013 - [Flash with SPFlash Tools]
Click to expand...
Click to collapse
OLD ROMs
Firmware Update (Intermediate V1) 18-Nov-/2013 [Flash with spflash Tools]
NucleaN1_FirmwareUpdate_V1_CWM.zip
Click Here - - [09/Sep/2013] [Flash with SPFlash Tools]
CWM Zip Download from herehttp://d-h.st/b3r
8GB version -
Click Here - [Flash with SPFlash Tools]
Custom ROMs
Click HERE
How to Flash Stock ROM using SP Flash Tools?
1) Unzip the ROM folder
2) Install the drivers and open SP Flash Tools..
Check the below post with images, if you are not sure whether drivers are installed or not.
If you face this problem, then try Firmware upgrade and connect the phone..
You can now safely disconnect your phone and turn it on. The process ends here.
FLASHING PATCH using SP Flash Tool(Single Files)
1)Select Android Scatter File .txt ....
2)Uncheck all files from the below box....
3)Select the correct file you want Flash by clicking it....
4)Click Download button on SP tool.... **"Dont click Firmware Upgrade"
5)A box asks to confirm it...Click Yes...
6)Connect Phone without the battery...
7)It will get Flashed...[/COLOR]
[Recovery]
1) Nuclea N1 Stock Recovery Click Here
2) TWRP Recovery- Click HereThanks to Kumar abhishek
3) CWMRecovery 6.0.3.3 Click Here or Click Here Thanks to C3C076
Procedure to Flash Recovery.
1) Download Mobile uncle tools from play store
2) Place the downloaded recovery.img in your sdcard
3) Open Mobile uncle tools
4) Select 'update recovery' and Click on the recovery.img
5) Reboot
adb method: For advance users:
---------------------------------------------------
Make sure you have all the drivers for your phone installed on your computer.
Make sure you have USB Debugging enabled, Install from Unknown Sources is enabled and device is detected in ADB run this command:
Code:
adb devices
Download the CWM Recovery
Press SHIFT key + Right mouse click in the folder where the file is located and select Open Command from Here.
Now, in the command prompt do the following:
a. Reboot into Bootloader mode. Use command:
Code:
adb reboot bootloader
b. Device will reboot and display logo. (check if device is in bootloader mode by running command:
Code:
fastboot devices
. If you see a device connected then you have successfully rebooted into fastboot mode.
c. Now, run this command:
Code:
fastboot flash recovery recovery.img
(This will flash the CWM recovery image to the device).
d. Once successful, reboot the device using this command:
Code:
fastboot reboot
.
How to Backup ur complete ROM
1. In CWM Recovery mode, select Backup and Restore
2. Select Backup
3. Wait till it finishes (May take upto 10 minutes)
How to restore ur backed up ROM from SD card
1. Go to CWM Recovery, select backup and restore
2. Select Restore
3. select the folder in date format (Folder name indicates the time and date when ur backup was created}
4. Wait till it finishes (May take upto 10-15 minutes)
Special Guides for Newbies to get Started
Everything you need to know about Clockworkmod Recovery
How to setup ADB and Fastboot properly
5 Things Every Android user should do
24 Apps Every Android User Must Install
5 Things to know before performing any Android tweak
Thanks to Driodiser
HIT THANKS PLEASE BECAUSE IT WONT COST ANY :angel:

Extend your storage on Nuclea N1
[Extend your storage on Nuclea N1] - Thanks to @kailashnj
Follow the instructions in the post HERE
How to enter into Recovery - Nuclea N1 :-
Code:
[LIST=1]
[*]Turn OFF your phone.
[*]Press & hold Vol(+) button and Power button for 12 seconds.
[B]Stock Recovery[/B]
[*]You will see a laid-down Android symbol with 'No command' message below it. Press the power button once.
[*]You will enter into menu 'Android System Recovery'
[*]Press Vol(-) to roll over options.
[*]Press Vol(+) button to select.
[*]DONE!
[/LIST]
Another options if you are facing trouble going to recovery:
Code:
1. Install Mobile Uncle tool
2. Reboot recovery.
MTK6589 Drivers
Universal Pdanet drivers Click Here
Follow this guide Here
Tools
MTK Android PC Sync Tool V2.1233.1 Click Here
SN_Write_tool_exe_v2.1132.0.rar - 8.27 MB
Guide Here
Driver_Auto_Installer_v1.1236.00 Click here

Meta-Mode is very useful if device fails to get detected by PC under normal Conditions.....To make device fall to Meta-Mode,just do these :
1) Start SP Tool on PC..
2) Now run SP Tool with "Firmware Upgrade/Download"
3) Switch OFF Phone..
4) Remove Battery..
5) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
6) Flashing will be started
7) Hold the button till flashing completes...
After 100% Flash,Release Button..
9) Insert Battery..
10) Start Device.
Click to expand...
Click to collapse
How to dump stock recovery image using SP Flash Tool
1) Download and install USB VCOM Driver
2) Download, extract and launch SP Flash Tool
3) Use "Scatter-loading" button to load attached scatter file: MT6589_Android_scatter_emmc.txt
4) Download stock recovery image and place inside the ROM folder. Then select only RECOVERY.
5) Turn off your phone. Make sure USB cable is unplugged. Wait until vibrator indicates it's turned off
6) Click Download button in SP Flash tool, confirm warning complaining about not all files being selected
7) Connect your phone and wait for the flash process to finish (indicated by window with green circle)
8) Unplug USB cable. Hold down Volume+ while turning your phone on to boot into recovery
Click to expand...
Click to collapse
Backing up your IMEI
Different Methods are available for this.
1) Use any RootExplorer to copy file /data/nvram/md/NVRAM/NVD_IMEI/MPOB_001 to your external SD card. (or if that folder does not exists, try /nvram/md/NVRAM/NVD_IMEI/MPOB_001). It is good to backup the entire folder /data/nvram/md/NVRAM.
2) Back up using Mobile Uncle utility. Click on Mobileuncle Tools --> Click IMEI Backup Restore (MTK) --> Backup/Restore
Restore your IMEI
Code:
1- Open Mobile Uncle Tools.
2- Goto Engineer Mode
3- Select Engineer mode[MTK]
4- Under Connectivity Tab go to CDS information
5- Select Radio Information
6- Select Phone1 (for the first imei)
7- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1? (instead of IMEI_1 put your first imei number)
8- hit send command
9- You will / may get a confirmation that "sent to mSend".
10-Now come back and select “Phone2?
11-at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2? (instead of IMEI_2 put your second imei number)
12-Then just reboot the phone.
13- Dial ” *#06#” to Check Imei.
Factory ROM Backup for MT65xx via MTK Droid Root & Tools For BackUp & Unbrick
It's tested and working...
How to install ADB USB driver in window 7
use this method also in window xp,if any driver not install
Google USB Driver Rev 7 ( ADB driver )
inside three dll file driver
1-WdfCoInstaller01009.dll
2-winusbcoinstaller2.dll
3-WUDFUpdate_01009.dll
link
Click Here
Before use it is necessary to check that:
adb drivers are installed. Check device manager--> unknown devices. ADB Drivers attached.
Now the Tool
Credits: umesh gaba
[MOD][4.1 4.2] Extend Phone Storage 1.5, 2.5GB A116 (Other MT6589 Devices on request)
[Solution] NVRAM WARNING: Err = 0x10
Download this zip Click Here
Prerequisites:
You have to backup IMEI of your phone (both sim slot).
Step 1 - Extract the WiFi Fix files and place them in a folder on your memory card
Step 2 - Open Root Explorer
Step 3 - Click on Mount R/W
Step 4 - Click on data
Step 5 - Scroll down to the folder named nvram
Step 6 - Open APCFG folder
Step 7 - Open APRDEB folder
Step 8 - Delete the WIFI and WIFI_CUSTOM files
Step 9 - Now copy/move the files on your sdcard to data/nvram/APCFG/APRDEB and Paste
Step 10 - After pasting both the files, close Root Explorer and REBOOT your phone.
Here is another method Click Here
The bad news is.

Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app

can you provide a review of the phone?
akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks

akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Yes, I am in batch II.

dhavalg said:
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks
Click to expand...
Click to collapse
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif&notif_t=group_activity

Hi Guys,
Even I have bought this phone and awaiting delivery, I was promised by 4th Aug. Lets see. The specs of this phone seems to be great other than the 4GB storage. I hope that apps2sd works really fine and I am able to store all my game data on the SD card. Wanted to know more info of this phone and the rom.
Regards,
Kailash

can't decide what to buy
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)

Thanks...
akashavel said:
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif&notif_t=group_activity
Click to expand...
Click to collapse
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.

:victory: Yesss... XDA Thread for Auxus Nuclea.. feeling exciting.. Best Wishes, Guy.. :good::good:

dhavalg said:
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.
Click to expand...
Click to collapse
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..

I prefer to use Titanium Backup to freeze unwanted app rather to uninstall.. this app will save lots of RAM..

without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts

Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....

ashok20205 said:
without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts
Click to expand...
Click to collapse
Yes, We can install Custom ROMs (Themed ROMs or Ported ROMs). But, with kernel sources a lot of development can happen. :good:

akashavel said:
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..
Click to expand...
Click to collapse
No need to wait for a Custom ROM. You can try One-Power-guard app, Clean master and Greenify app's.

Chris s5830i said:
Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....
Click to expand...
Click to collapse
This mobile is good at it price with the spec's. Even Micromax is not providing kernel sources. Also, compared to the support of Micromax, iBerry is doing best.

abhiek bist said:
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)
Click to expand...
Click to collapse
Check the facebook page. Then you can decide

Can you post link for CWM for nuclea N1
can you help me with the link for CWM

XOLO Q3000 Kitkat update

XOLO Q3000 KITKAT 4.4.2 update
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITShadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...

Reserved

Now thats exactly the way it is done....a perfect tutorial to get urself that Kitkat u have been waiting for.....thanks a lot Avi....

how to increase app install memory

I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app

patilsb said:
I have cwm ,can I install this kitkat by cwm
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
U cant flash it from cwm.
u have to use sp flash tools as everything has tobe changed.

avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?

baystallion said:
avi,
i assume, this reverts any existing custom recovery back to xolo kk stock recovery. would sptool flashing custom recovery (ctr, twrp preferably) work? have you tried this?
Click to expand...
Click to collapse
Yeah u can install custom recovery in kk.
Just see below in my signature - recovery collection.

sir ,i have error in installing;; "pmt change " again and again ,i change as your ...rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak " but error still stay. {my scatter image showing as -"MT6589_Android_scatter_emmc.txt.bak.txt "are they correct?]
any problem plz help me .

Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app

patilsb said:
Error pmt change after rename scatter file
Sent from my NOTE 3 using XDA Free mobile app
Click to expand...
Click to collapse
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.

Updated successfully
avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
Updated successfully from 4.2.1 to 4.4.2

avi3230 said:
u just delete the scatter present in the folder (better way to move it in other folder)
then place the attached scatter in original folder.
start flash tools
select scatter and try.
Click to expand...
Click to collapse
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
ravi_21 said:
Updated successfully from 4.2.1 to 4.4.2
Click to expand...
Click to collapse
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?

patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Have u installed vcom drivers correctly?
Try using another version of flash tool.

patilsb said:
nothing ......error pmt change ,
what can i do ?
---------- Post added at 04:35 PM ---------- Previous post was at 04:28 PM ----------
dear ravi
i have pmt change error, how can i solve this? [ i delet scatter file from original folder [move to other folder] and rename and move to original folder ...start sp --select scstter --but nothing download ] error also showing pmt.please help me how to....?
Click to expand...
Click to collapse
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
---------- Post added at 10:36 PM ---------- Previous post was at 10:28 PM ----------
ravi_21 said:
Hi
Just follow these simple steps and you will be done.
1. Take out "scatter file" from main folder (File to Flash) and place where you can easily access that.
2. Run SP Flash tool
3. Select same “scatter file” which you have taken out from main folder
4. Once we take out the scatter file out from mail folder we break link between two files so Now select each file i.e. Preloader or Uboot in SP Flash tool manually to set their link back to normal.
5. Once all file given correct path click download
6. Connect your phone with or without batter (For me WITH battery)
7. If everything goes well after few seconds red line will appear that will turn in purple followed by yellow.
8. Once green circle appears that mean BINGO you are done.
Click to expand...
Click to collapse
If still facing issue then copy content of scatter file given in link and replace the content in downloaded file and do the whole process again.

Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
---------- Post added at 11:15 AM ---------- Previous post was at 10:37 AM ----------
patilsb said:
Thanks ....sir great ...thanks for help me .it worked..
Sent from my Q3000 using xda app-developers app
Click to expand...
Click to collapse
But another problem "root asses goan" .there is superuser app. In my system ,but not working .unrooted phone-exSD card not mounted, can I root my divice by RootGenios?(but ex SD partition is mounted)
Sent from my Q3000 using xda app-developers app

avi3230 said:
XOLO Q3000 KITKAT 4.4.2 update
Kitkatify our beloved Q3000 before the official release.
Android kitkat 4.4.2 for MTK6589 devices is released.
This is a tutorial for all to install kitkat 4.4.2.
NOTICE
I Will Not Be Responsible For Any Brick or Any Problem.....
So Flash At Your Own Risk.
This ROM flashes every partition and DOES change anything.
SO chances of brick are ther but still, please keep nandroid Backup ready which will be used if you find issues in the process so that you can revert back to your old system.
Pr-requisites
Kitkat flash files from hadiyalkishan
SP flash tools
Mtk tools
MTK drivers
vcom drivers
scatter file
working computer or laptop with usb cable.
our beloved XOLO Q3000 with android JB off course.
little patience courage and slight brain.
So lets get started
1. Driver installation
install android usb drivers and vcom drivers.
Plug in ur mobile with usb cable when switch on. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off. let windows recognize it and install drivers.
Plug in ur mobile with usb cable when switch off, after connection press power button once. let windows recognize it and install drivers.
You can skip above part if you already know what this all about.
2. Taking backups
Backup all ur apps, data installed.
Save all files from ur internal storage.
internal storage going to get formatted.
also backup ur nvram in mtktools (just in case for safty)
3. Preparation
Extract kitkat files in a separate folder.
shut down ur phone.
start SP Flash Tool v5.1352.01
load the scatter file from the folder.
If you using version 5.13 it will look like this
if android is not selected please click on it and browse to folder and select system.img
uboot not present here. click it and select file named "LK"
If you using version 3.13 it will look like this
all files will be selected without issues
4. Flashing
start flashing procedure by pressing download button.
plug in ur powered off xolo Q3000.
There will green colored logo at the end off process.
if everything goes well its ok your done.
Just take out the phone.
remove battery once.
place it again
restart.
5. Trouble shooting
If at all there is any error in process please follow these steps
most common error that i faced was pmt changed error as shown below
or in 3.13
dont panic everything is under control
Now close spf tools
browse to the kitkat file folder
rename MT6589_Android_scatter_emmc.txt to MT6589_Android_scatter_emmc.txt.bak
copy here the downloaded scatter file.
follow the flash procedure as mentioned above.
U will see a green coloured logo.:good:
congratulations.
You have kitkat now on your mobile.
5. Trouble shooting before restarting
Now pull out battery.
dont restart
put battery in
keep vol up button pressed and then press power button till xolo logo appers
release both button and
dont panic
just press power button once
You will go into stock android recovery
recovery option will come
just use vol down button for scrolling
select factory reset
press vol up button for execution
then select restart.
Your done.
6. Further Trouble shooting after restarting
Suppose accidentally in hurry u restarted mobile.
u will see nice boot animation and suddenly
Dont panic again
just press reset phone.
phone will restart
IF it wont go further press rest phone twice thrice
pull out battery and put in again and restart.
NOW enjoy ur kitkat 4.4.2 on xolo Q3000.
Goto settings-storage
You can clearly notice
The size of internal storage is around 4gb.
Thats why we need to backup internal storage as its get formatted in process.
If you browse apps you can see there is already super user app
It means it is prerooted.
6. Further Trouble shooting in kitkat
If at all superuser not working use root genius to root your phone.
Next most imp thing is sd card permissions.
its disabled in kitkat by defalut.
so u just use this app or manually put platform.xml in system/etc/permission ( u will get this anywhere just google)
another alternatives
1. KitKat SD Card Full Access.
2. HandleExternalStorage.
NOW ENJOY KITKAT FULLY.
If you have any query or doubts regarding whole procedure please feel free to pm.
Yes this process involves risk of bricking your phone, but thanks to mediatek as there chipsets are bootloader unlocked and we can revert back from any worst possible conditions.
CREDITShadiyalkishan - for the stock kitkat rom.
rufus.reynolds & Jagadish-ravi - for testing the whole procedure after showing faith in me:good:
m0han - for timely assistance and links provision.
Thank You...
Share Your experiences...
Click to expand...
Click to collapse
hi avisir,
i install root genios and try 2/3 time but my phone not rooted [ error -root failed root manually]
what can i do for this? when i install kitkat, that time i saw super user then i update Vroot,...then unfortunetlly super user goan.
i tried framroot /mtkdroid tool but no effect....

Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.

baystallion said:
Root doesn't seem to be persistent. I uninstalled the superuser app immediately after installing the ROM. After this, I flashed ctr custom recovery using sp flash tool, downloaded and flashed SuperSU from recovery.
Click to expand...
Click to collapse
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.

avi3230 said:
U shuoldnt had done it?
U should install supersu app first and then reboot and uninstall the original superuser.
try using vroot, eroot or root geniuos.
Click to expand...
Click to collapse
Avi, well it just worked for me.. I currently have a working SuperSU install following the procedure I'd mentioned
Just so we are clear, the problem here is that, once kk ROM is installed, the superuser app will show that the phone is rooted. After some time, opening the app will show that the phone is unroofed.. I'm sure this is not an issue with the super user app but something else.. But flashing SuperSU as I said in my last post fixes root which is what I wanted..
If you know the actual root cause, I want to know about it..

Database Info

welcome