Database Info

[[UPDATE]] [[CWM]] ( Recovery v6.0.3 ) For Micromax A101

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi Again Come with CWMR 6.0.2.8 for Micromax A101 which are similar to A110
check here for full specification of Micromax A101
Click to expand...
Click to collapse
Clockworkmod Recovery 6.0.2.8 for Micromax A101
Click to expand...
Click to collapse
How to install Clockworkmod recovery:
Click to expand...
Click to collapse
Root Required
Click to expand...
Click to collapse
Very Easy & safe way to FLASH CWM RECOVERY in any Android Device
steps:->
1. Downlaod CWM recovery.img
2: download recovery manager from HERE now Copy CWM recovery.img in SD card, now install the recovery manager.apk normally
3. Now open the recovery manager app you recently installed.
4. Click on recovery in app menu.
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your recovery
Click to expand...
Click to collapse
SP Flash Tool method, root not required
Click to expand...
Click to collapse
Important Notes this given Screenshots only 4 example its not for any proper device
Click to expand...
Click to collapse
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.2.8 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
Some SS Tutorials for how to flash CWMR using SP Flash Tools
Click to expand...
Click to collapse
Check here all steps
Click to expand...
Click to collapse
Credit : -
bgcngm
yuweng
Cygwin
Me
dont say Thanks Hit
if you can
Click to expand...
Click to collapse

error
BHARDIK said:
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.2.8 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
Click to expand...
Click to collapse
Hey dude
recovery says "E:Can't mount /sdcard/".
other all partitions are getting mounted. but sdcard and emmc dosent get mounted.
plzzz help.
Thank you

BHARDIK said:
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.2.8 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
Click to expand...
Click to collapse
u are talking about A90s CWM ? its tested by me personally and its work fine make sure u download and flash correct recovery image and re-flash recovery using flash tool and reboot device then again reboot to recovery then check and post reply
Thanks
Hardy
Sent from my UMI X2 using xda premium

BHARDIK said:
u are talking about A90s CWM ? its tested by me personally and its work fine make sure u download and flash correct recovery image and re-flash recovery using flash tool and reboot device then again reboot to recovery then check and post reply
Thanks
Hardy
Sent from my UMI X2 using xda premium
Click to expand...
Click to collapse
i used it on Micromax canvas A101.

adukale said:
i used it on Micromax canvas A101.
Click to expand...
Click to collapse
ok, i might some problem in recovery image ill fix it as soon as possible and upload new one wait for some times ...if possible then i upload it tomorrow or sunday only ...
thanks
Hardy
Sent from my UMI X2 using xda premium

Hey dude i made cwm recovery through MTK droid tool. Its working fine.
Thank you
Sent from my Micromax A117 using xda app-developers app

BHARDIK said:
ok, i might some problem in recovery image ill fix it as soon as possible and upload new one wait for some times ...if possible then i upload it tomorrow or sunday only ...
thanks
Hardy
Sent from my UMI X2 using xda premium
Click to expand...
Click to collapse
thats cool
congrats
thanks
Hardy
Sent from my UMI X2 using xda premium

Recovery Update fixed......every bugs
Hey guys sorry for bit late.....
but now i fix this 6.0.2.8 recovery and upgrade it to 6.0.3 version
Code:
[SIZE="7"][COLOR="Blue"]BUGS FIXED from old recovery :-[/COLOR][/SIZE]
Code:
not mound sd card
not mount internal storage
mounting system issue sometimes
thanks
Hardy

Jelly Bean based Micromax A110 : Install CWM Recovery and Root

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before someone fires me with questions like what's new in this, i would like to confront that I know this guide is delayed to post as on date. But having noticed there are many ppl even today still with questions about how to root Jelly Bean based MMX A110. Thought of posting this guide for those people.
Dear Visitors, Please Thank the links (XDA links) on click that i mentioned below for downloads.
Disclaimer: Rooting voids your warranty. Neither ME nor XDA will be held responsible for bricking your phone. Use at your own risk.
Downloads​1. SP Tools & VCOM Drivers
2. Micromax A110 drivers
3. CWM Recovery 6.0.3.3
4. MT6577_Android_scatter_emmc.txt
5. 7-zip
6. SuperSU-v1.04.zip
Install CWM Recovery​1. Extract MT6577_Android_scatter_emmc.zip, CWM Recovery to some path say C:\MMX\Update folder. Note: Extracted recovery must appear with filename as "recovery" mandatorily.
2. Extract SP Tools.7z with 7-zip software and locate to some path say C:\MMX\SPTOOL folder
3. Install VCOM and Micromax A110 aka Cynus Drivers.
4. Run Flash Tool.exe from extracted folder. Click Scatter-loading button and locate to the path C:\MMX\Update folder and select MT6577_Android_scatter_emmc.txt
5. Check the box RECOVERY only and Uncheck everything else.
6. Turn off your phone, Reinsert battery but don't plug in to pc now.
7. Click the Download(F9) button
8. Plug your phone (Turn off condition only) and it may ask some additional verification steps like install unsigned driver in Windows 7/8. Simply click yes install unsigned driver and wait.
9. You will see some msgs like Preloader bla bla. Just wait until you see OK button displayed on screen.
At this point CWM Recovery is installed. Click OK and disconnect your phone.
To enter Recovery: Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu
Rooting​Two ways possible.
1. Either install some Custom ROM which obviously will be pre rooted.
OR
2. Place the downloaded SuperSU-v1.04.zip in Internal or External SD. Goto CWM Recovery. Choose option Install from SD card and browse to SuperSU-v1.04.zip You will get message as installation complete. Reboot your phone. Done..!!!
Credits : @icoolguy1995 @Dark4Droid @droidiser

Good job man. This should be made a sticky. Great guide!!

There is one dos based utility to do rooting... Simply enter option for root and finish... Is this will not work with jb??
Sent from my Micromax A110 using Tapatalk now Free
---------- Post added at 02:24 PM ---------- Previous post was at 02:18 PM ----------
This tool is binary tool for rooting... jj please confirm..
Sent from my Micromax A110 using Tapatalk now Free

ck.kislay said:
There is one dos based utility to do rooting... Simply enter option for root and finish... Is this will not work with jb??
Sent from my Micromax A110 using Tapatalk now Free
---------- Post added at 02:24 PM ---------- Previous post was at 02:18 PM ----------
This tool is binary tool for rooting... jj please confirm..
Sent from my Micromax A110 using Tapatalk now Free
Click to expand...
Click to collapse
Probably you mean to say about Bin4ary tool. That worked only with ICS. I don't know if there was an update released for it to root jelly bean on MMX A110. Anyway, This method mentioned at OP will work for rooting both ICS and Jelly Bean using the well known SP Tools which is also used for flashing STOCK ROMS.

Hi bro..
No need to mention that u spend some time in making this thread.
There will be some noobs always making threads in help and troubleshoot section to ask how to root? Thats because i think that they never used that search button to find out existing threads. If they are directed to any present thread than they are able to root easily. IN SHORT THEY ARE IN THE HABBIT OF SPOON FEEDING!
Well by the way good work buddy.:thumbup:
Nice tutorial.:thumbup:

[email protected] said:
Hi bro..
No need to mention that u spend some time in making this thread. But there are already same threads like this and think with almost equal detail.
There will be some noobs always making threads that how to root? Thats because i think that they never used that search button. If they are directed to any present thread than they are able to root easily.
Well by the way good work buddy.:thumbup:
Click to expand...
Click to collapse
Hi buddy..I mentioned those first few lines bcz sometimes it happens some ppl with typical mindset having sound knowledge ll jump in and try to show off just to avoid those rude comments I had mentioned. Agree I saw threads alike. But as u said, they weren't with clear title and instructions at op. Biggest confusion to ppl mindset was when jelly bean came out and bin4ary tool couldnt root. So thought a separate guide could be clear enough and helpful for newbies thanks for the appreciation.
Sent from my GT-I9500 using Tapatalk 4

Oh sorry bro....
I actually wanted to say something else but now I think that I had conveyed something else.
By saying "noob" i actually pointed out those persons who make threads in help and troubleshoot section for asking "how to root" and not at all you.
I referred to them when i said that they never used search button and make the same threads again and again in this hope that they will receive a link of that threads....(they always wanted to be spoon feeded)
Edited my previous post. Now it is what i actually wanted to say. Still if u feel i am one of that typical mindset person than i will delete that post.

[email protected] said:
Oh sorry bro....
I actually wanted to say something else but now I think that I had conveyed something else.
By saying "noob" i actually pointed out those persons who make threads in help and troubleshoot section for asking "how to root" and not at all you.
I referred to them when i said that they never used search button and make the same threads again and again in this hope that they will receive a link of that threads....(they always wanted to be spoon feeded)
Edited my previous post. Now it is what i actually wanted to say. Still if u feel i am one of that typical mindset person than i will delete that post.
Click to expand...
Click to collapse
Hey common brother you need not be sorry , its just a misunderstanding i didn't mean the last reply for you mate. It was in general bcz i noticed these happening here and there in our mtk community threads IT WASN'T FOR U JATIN BUDDY

my volume key is not working
hi... my volume (-) key is not working... is there any other method to go in recovery menu?

Praveen
can u please sugest me for canvas a111 actually canvas a111 dont have any scatter file na how can i install in canvas a111 please help me
==vj== said:
Before someone fires me with questions like what's new in this, i would like to confront that I know this guide is delayed to post as on date. But having noticed there are many ppl even today still with questions about how to root Jelly Bean based MMX A110. Thought of posting this guide for those people.
Dear Visitors, Please Thank the links (XDA links) on click that i mentioned below for downloads.
Disclaimer: Rooting voids your warranty. Neither ME nor XDA will be held responsible for bricking your phone. Use at your own risk.
Downloads​1. SP Tools & VCOM Drivers
2. Micromax A110 drivers
3. CWM Recovery 6.0.3.3
4. MT6577_Android_scatter_emmc.txt
5. 7-zip
6. SuperSU-v1.04.zip
Install CWM Recovery​1. Extract MT6577_Android_scatter_emmc.zip, CWM Recovery to some path say C:\MMX\Update folder. Note: Extracted recovery must appear with filename as "recovery" mandatorily.
2. Extract SP Tools.7z with 7-zip software and locate to some path say C:\MMX\SPTOOL folder
3. Install VCOM and Micromax A110 aka Cynus Drivers.
4. Run Flash Tool.exe from extracted folder. Click Scatter-loading button and locate to the path C:\MMX\Update folder and select MT6577_Android_scatter_emmc.txt
5. Check the box RECOVERY only and Uncheck everything else.
6. Turn off your phone, Reinsert battery but don't plug in to pc now.
7. Click the Download(F9) button
8. Plug your phone (Turn off condition only) and it may ask some additional verification steps like install unsigned driver in Windows 7/8. Simply click yes install unsigned driver and wait.
9. You will see some msgs like Preloader bla bla. Just wait until you see OK button displayed on screen.
At this point CWM Recovery is installed. Click OK and disconnect your phone.
To enter Recovery: Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu
Rooting​Two ways possible.
1. Either install some Custom ROM which obviously will be pre rooted.
OR
2. Place the downloaded SuperSU-v1.04.zip in Internal or External SD. Goto CWM Recovery. Choose option Install from SD card and browse to SuperSU-v1.04.zip You will get message as installation complete. Reboot your phone. Done..!!!
Credits : @icoolguy1995 @Dark4Droid @droidiser
Click to expand...
Click to collapse

Recovery mode
Thanks for the detailed post. Can you please tell me at which point exactly I should enter into recover mode I mean to ask when do I do the following ?
" Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu"
==vj== said:
Before someone fires me with questions like what's new in this, i would like to confront that I know this guide is delayed to post as on date. But having noticed there are many ppl even today still with questions about how to root Jelly Bean based MMX A110. Thought of posting this guide for those people.
Dear Visitors, Please Thank the links (XDA links) on click that i mentioned below for downloads.
Disclaimer: Rooting voids your warranty. Neither ME nor XDA will be held responsible for bricking your phone. Use at your own risk.
Downloads​1. SP Tools & VCOM Drivers
2. Micromax A110 drivers
3. CWM Recovery 6.0.3.3
4. MT6577_Android_scatter_emmc.txt
5. 7-zip
6. SuperSU-v1.04.zip
Install CWM Recovery​1. Extract MT6577_Android_scatter_emmc.zip, CWM Recovery to some path say C:\MMX\Update folder. Note: Extracted recovery must appear with filename as "recovery" mandatorily.
2. Extract SP Tools.7z with 7-zip software and locate to some path say C:\MMX\SPTOOL folder
3. Install VCOM and Micromax A110 aka Cynus Drivers.
4. Run Flash Tool.exe from extracted folder. Click Scatter-loading button and locate to the path C:\MMX\Update folder and select MT6577_Android_scatter_emmc.txt
5. Check the box RECOVERY only and Uncheck everything else.
6. Turn off your phone, Reinsert battery but don't plug in to pc now.
7. Click the Download(F9) button
8. Plug your phone (Turn off condition only) and it may ask some additional verification steps like install unsigned driver in Windows 7/8. Simply click yes install unsigned driver and wait.
9. You will see some msgs like Preloader bla bla. Just wait until you see OK button displayed on screen.
At this point CWM Recovery is installed. Click OK and disconnect your phone.
To enter Recovery: Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu
Rooting​Two ways possible.
1. Either install some Custom ROM which obviously will be pre rooted.
OR
2. Place the downloaded SuperSU-v1.04.zip in Internal or External SD. Goto CWM Recovery. Choose option Install from SD card and browse to SuperSU-v1.04.zip You will get message as installation complete. Reboot your phone. Done..!!!
Credits : @icoolguy1995 @Dark4Droid @droidiser
Click to expand...
Click to collapse

Install CWM Recovery in Lava iris 458q

Note- Before doing this, please ROOT your Lava Iris 458q. for rooting check this link
http://forum.xda-developers.com/showthread.php?p=49976717#post49976717
link to Download necessary file https://drive.google.com/folderview?id=0B74Xjste8p2VNmZGQWxvNTAteWc&usp=sharing
Note:-Please put all this in one singe folder)
Instructions:-
1. Install all Drivers inside that downloaded folder.
2. Put your phone in USB debugging mode from Developer Options in the Settings Menu. (If you cant find the Developer options, go to Settings> About Phone and tap the "build number" 8 times.)
3.Connect your phone to the computer. (In USB storage mode)
4. Open MtkDroidtools.exe from the folder MTK droid tools you downloaded before.
5. Wait till the device is detected (on the bar at the bottom)
6.Click on the ROOT button. and wait till the process is done.
7. Now go to the "root,backup,recovery" Tab.
8. from the 2nd box, select the option "To choose the boot.img file"
9.Click on the button "Recovery and Boot" and choose the Boot.img file downloaded before.
10. Click YES on the next popup asking Automatic CWM and YES on ALL the following popups.
After Reboot, the phone is successfully in CWM recovery MODE !!! (Use Volume up and down buttons to navigate and Power button as Enter)
Now that you have install CWM,
Note:-use windows 7 or lower version windows

Alternate Method
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:

yes it perfectly worked and rooted my phone.

patel_s said:
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:
Click to expand...
Click to collapse
Can u provide rooting method for lava iris x1 because vroot method is not working... It has KitKat running on it.
Sent from my iris X1 using XDA Free mobile app

Micromax Canvas doodle 3 [A102] Official Development thread.

Micromax canvas doodle 3 a.k.a A102 was released recently, a budget android phone or phablet. With a Meditek MT6572 processor and Android 4.2.2 stock.
Development thread for a local market phone exists rarely, and that rare thread is created by me[emoji15] .
Prime

Rooting Micromax Canvas Doodle 3 A102 with 1GB RAM Kitkat 4.4.2
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..

Kindly find the images of SP Flash & the flashed recovery.
It's for reference and guide.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanxxxxxxxx
was very helpfull ,,,,doodle 3 kitkat version root.......................try it,,,, its work for kitkat ota

Rooting Micromax canvas Doodle 3 .....
Friends if anyone is getting difficulty in going to recovery mode using Power+Volume up button
Download adb setup zip file from below and install the adb setup
then
goto Command Prompt and type
adb reboot recovery
your phone will goto recovery mode automatically
then rest is given in above post.
dont forget to ht thanks if helped.

Finaly root
navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
thanks bro,
finaly root my doodle 3 updated kitkat 1gb ram
i use below attached scatter file

MIUI ROM for Micromx Canvas A102
Here it Comes
MIUI ROM for Micromax Canvas Doodle 3 with 1GB ram
IS NO MORE WORKING

navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
this method is not working the flash app is not detecting my device .....its getting very annoying...cus I have been trying hard to root this phone with this version of OS...pls help me by making a video tutorial for rooting this phone

navi95295 said:
Download recovery.img
You Need SP_Flash_Tool_v5.1352.01.zip
and UPDATE-SuperSU-v2.02.zip
Download below
put UPDATE-SuperSU-v2.02.zip in your SD Card
Now extract Sp Flash Tools and download Scatter File from Below
1. Open Sp Flash Tools
2. Put Scatter file and recovery.img in same folder
3. Load Scatter File Downloaded from below
4. now the recovery will be automatically selected
5. Install Drivers from here micromaxinfo.com/download.ashx?section=mobile-A102&file=Canvas_Doodle_3_Driver.zip
6. Switch off your Phone Pull out Battery and Connect it to PC using USB Cable
7. Click on Download
8. After the process is completed a green tick will appear
9. Now disconnect mobile and Put battery in and goto recovery mode using volume up+Power button select recovery and then push vol Down button
here is your custom recovery now select install zip from sdcard using power up and down buttons and select from power button
Now a prompt will appear select yes.
Now go back using soft keys on your mobile and reboot ..
Here you are
Your Phone is Rooted Now..
Click to expand...
Click to collapse
your above steps are not working in my phone a102 ,doodle 3...i had recently upgarded to kitkat 4.4.2 .......none of the methods or rootapps are working for rooting this device
pls sir can you make one video tutorial for rooting this device with the above version of OS...asap

Rooting Micromax canvas Doodle 3 .....
damianlepcha said:
this method is not working the flash app is not detecting my device .....its getting very annoying...cus I have been trying hard to root this phone with this version of OS...pls help me by making a video tutorial for rooting this phone
Click to expand...
Click to collapse
Use following Link to Download the latest version of SP flash Tools and retry with the scatter file and recovery image given.
This will let you download recovery to your handset and getting Root.
copy and paste this link to your browser and download .. d-h.st/weue

couldn't reboot into recovery mode from doodle 3
My ram is 1 GB and my phone is rooted but I couldn't reboot into recovery plz anyone help meme
My PC is damaged plzzz anyone post a process to install CWM without PC
Thanks in Advance

Tapan Arya said:
My ram is 1 GB and my phone is rooted but I couldn't reboot into recovery plz anyone help meme
My PC is damaged plzzz anyone post a process to install CWM without PC
Thanks in Advance
Click to expand...
Click to collapse
Use Mobileuncle tools or Rebooter app for reboot into recovery mode.

I already used but doesn't works

Tapan Arya said:
I already used but doesn't works
Click to expand...
Click to collapse
If you are rooted then have u installed the CWM provided in Post #2
install using Mobileuncle tools
then root
Dont Forget to Endale USB Debugging mode from developer options
and reboot to recovery from mobile uncle tools.
It should reboot into recovery. if not then tell me what any error is coming ??

Error is that when I reboots into recovery micromax logo comes for 10 seconds and after that it restarts

Tapan Arya said:
Error is that when I reboots into recovery micromax logo comes for 10 seconds and after that it restarts
Click to expand...
Click to collapse
Just try to reinstall the recovery using mobileuncle tools and then reboot.
Hope it will work

I just tried to and updated recovery from mobile uncle but it shows as before

Please Help apk
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.

osamaanjum said:
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.
Click to expand...
Click to collapse
just copy and paste them in /system/app and change permissions to rw- r-- r-- and reboot
and for camera just restore factory settings if it didnt helped then reflash the stock Rom (System Only) and done.
Dont forget to backup your IMEI before doing anything.

osamaanjum said:
Please someone attach me the stock camera app (and gallery), I've accidentally deleted it. My phone is doodle 3 A102 and is running 4.4.2 kitkat.
Click to expand...
Click to collapse
Use ESfile Explorer to Copy it to system folder and change permissions..

Micromax Canvas Fire 5 Q386

Micromax Canvas Fire 5 Q386 Zone​
All the stuffs you need for the Micromax Canvas Fire 5 Q386. ​​​
Quick Links!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Micromax Canvas Fire 5 Q386, 3G smartphone with 5.5-inch HD display launched, priced at Rs 4,424.
Highlights
- 3G
- 1.3 GHz MT6580 Chipset Quad-Core Processor
- 1 GB RAM
- 16 GB Internal Memory
- 64 GB Expandable Memory Card Slot
- 5.5 Inch HD IPS Display
- Dual Sim'
- 8 MP Rear Camera With LED Flash
- 5 MP Front Camera With LED Flash
- Bluetooth/FM
- 2500 mAh Battery
Nougat ROMs out for Micromax Canvas Fire 5 Q386!
Check it out over HERE​
Great News Guys!
I have made a blog "Micromax Canvas Fire 5 Q386 Zone", containing all the mods.
Don't forget to check it out. ​

Stock Rom​
Instructions
1. Download either of the Stock ROM from the below list and extract it..
Micromax Q386 MT6580 V06 HW V1.0 28052016
Micromax Q386 MT6580 V11 HW V1.0 23062016
Micromax Q386 MT6580 V12 HW V1.0 16072016​
2. Open SPFlashTools.
3. Load the MT6580 Scatter File which comes preloaded with the Micromax Canvas Fire 5 Q386 Stock ROM .
4. Click on the Download button.
5. Power off the Q386.
Remove the Battery.
Plug in the USB Cable.
Wait for a few seconds for the q386 to get detected'.
6. Right after the detection, wait for a few moment' for the flashing process to complete successfully.
7. After Flashing has completed, you will see a pop up with tick mark with a message saying Download Ok.
8. Unplug the USB Cable.
Insert back the Battery.
Press Power button to boot the Q386.
Wait for a few minutes for the Q386 to boot successfully.

Unlocking the Bootloader​
Instructions
Setting up ADB & Fastboot​
1. Download the 15 Seconds ADB Installer and extract it to a folder.
2. Run the 15 Seconds ADB Installer.exe as Administrator.
3. Wait for the 15 Seconds ADB Installer to open.
4. Type Y and hit Enter.
5. Again type Y and hit Enter.
6. And again type Y and hit Enter.
7. A Device Driver Installation Wizard window will pop up. Hit the Next button.
8. Click Finish when it's done.
Running the commands​
1. Navigate to -> My Computer -> Local Disk ( C: ) -> ADB folder
2. Holding down the Shift key, right-click on an empty space in the ADB folder
3. Select Open command window here.
4. A Command prompt must' open.
5. Connect the Q386 to the PC via USB cable and then run adb devices and then press Enter
6. If you have setup' everything perfectly, then the Q386 should get detected under List of devices attached
7. Run adb reboot-bootloader to test the connection to the Q386 into Bootloader [Fastboot Mode]
8. The Q386 should now boot into [Fastboot Mode]
9. Run fastboot devices to test the connection to the Q386
10. If fastboot is set up right, you should see the ID printed out
11. Run fastboot oem unlock to unlock the Q386 Bootloader
12. You should get a prompt on the Q386 asking you to press Volume Up to Confirm or Volume Down to Cancel
13. Press Volume up on the Q386
14. Once Bootloader is Unlocked, reboot the Q386 using fastboot reboot
ENJOY! ​

TWRP Recovery​
1. Download either of the TWRP from the below list and extract it.
2. Open SPFlashTools.
3. Load the MT6580 Scatter File which comes preloaded with the Micromax Canvas Fire 5 Q386 Stock ROM [I have put no extra scatter file, because there is no necessity of any other scatter file].
4. Uncheck all the partitions except Recovery.
5. Click on the Recovery tab and navigate to the folder where you have' previously extracted the recovery.img and select the recovery.img.
6. Power off the Q386.
Remove the Battery.
Plug in the USB Cable.
Wait for a few seconds for the flashing process to complete successfully.
7. Unplug the USB Cable and insert back the Battery.
8. Press Volume Up + Power button combination to boot into Recovery Mode.
9. Wait for a few seconds for the Q386 to boot into Recovery Mode.
TWRP v3.0.2​​
TWRP v3.1.1​

Rooting​
Instructions
1. Download either Magisk or SuperSU.
2. Power off the Q386.
3. Press Volume Up + Power button combination to boot into Recovery Mode.
4. Tap on Install button and navigate to the folder where you have' downloaded the SuperSU.zip and select the SuperSU.zip.
5. Slide to Flash the Zip and wait for a few seconds for the flashing process to complete successfully.
6. Reboot the Q386.

Nougat Based Custom Roms​
I do not own anything with the Custom Roms [i hope you get what i just said, so just DEAL with IT].
I just do' the porting of Custom Roms for My Device "Micromax Canvas Fire 5 Q386" and since the device has no development threads, i'm here to help the people who own the so called same device​.
1. Download any ROM(s) from My ROMs Folder.
2. Power off the Q386.
3. Press Volume Up + Power button combination to boot into Recovery Mode.
4. Tap on Wipe button and select only the Data, Dalvik Cache and Cache partitions.
4. Slide to Wipe the selected partitions.
5. Return back to the root of the Recovery Mode.
6. Tap on Install button and navigate to the folder where you have' downloaded the ROM(s) and select the ROM(s)zip.
7. Slide to Flash the Zip and wait a few minutes for the flashing process to complete successfully.
8. Reboot the Q386.

Marshmallow Based Custom Roms​
I do not own anything with the Custom Roms [i hope you get what i just said, so just DEAL with IT].
I just do the porting of Custom Roms for My Device "Micromax Canvas Fire 5 Q386" and since the device has no development threads, i'm here to help the people who own the so called same device​.
1. Download any ROM(s) from My ROMs Folder.
2. Power off the Q386.
3. Press Volume Up + Power button combination to boot into Recovery Mode.
4. Tap on Wipe button and select only the Data, Dalvik Cache and Cache partitions.
4. Slide to Wipe the selected partitions.
5. Return back to the root of the Recovery Mode.
6. Tap on Install button and navigate to the folder where you have' downloaded the ROM(s) and select the ROM(s)zip.
7. Slide to Flash the Zip and wait a few minutes for the flashing process to complete successfully.
8. Reboot the Q386.

GApps
​
1. Download any version of GApps zip from the GApps website.
2. Power off the Q386.
3. Press Volume Up + Power button combination to boot into Recovery Mode.
4. Tap on Install button and navigate to the folder where you have' downloaded the GApps zip and select the GApps zip.
5. Slide to Flash the Zip and wait for a few seconds for the flashing process to complete successfully.
6. Reboot the Q386.
Make sure you tweak the build.prop values as follows;
ro.product.manufacturer=Micromax
ro.build.product=Q386
ro.product.model=Micromax Q386
ro.product.name=Q386
ro.product.device=Q386
ro.build.description=full_v3750-user 6.0 MRA58K 1468822537 release-keys
ro.build.fingerprint=Micromax/Q386/Q386:6.0/MRA58K/1461117601:user/release-keys
Click to expand...
Click to collapse

Vendor Blobs
​
1. Download the Vendor Blobs.zip.
2. Power off the Q386.
3. Press Volume Up + Power button combination to boot into Recovery Mode.
4. Tap on Install button and navigate to the folder where you have' downloaded the Vendor Blobs.zip and select the Vendor Blobs.zip.
5. Slide to Flash the Zip.
Wait for a few seconds for the flashing process to complete successfully.
6. Reboot the Q386.

Reserved!​

Reserved!​

use kingroot to root miceomax fire canvas 5. kingroot can root it 100%
mr_unpredictable said:
Rooting​
Links - Coming Soon
​
Click to expand...
Click to collapse
use kingroot to root miceomax fire canvas 5. kingroot can root it 100%

Shiva465 said:
use kingroot to root miceomax fire canvas 5. kingroot can root it 100%
Click to expand...
Click to collapse
Hello buddy! It does not work, as the phone itself is a very tough phone to root. Kingroot and neither of the apps work.
Even flashing SuperSU [or any version of SuperSU] via TWRP or any recovery doesn't make any difference.
I will put a root file or a root prOcedure on this thread ASAP.
Just stay tuned!

okay
mr_unpredictable said:
Hello buddy! It does not work, as the phone itself is a very tough phone to root. Kingroot and neither of the apps work.
Even flashing SuperSU [or any version of SuperSU] via TWRP or any recovery doesn't make any difference.
I will put a root file or a root prOcedure on this thread ASAP.
Just stay tuned!
Click to expand...
Click to collapse
II have a micromax canvas juice 3 plus it is also a tough phone to root Kingroot, Oneclick root, Kingoroot, Root genius nothing worked but i root means vroot worked on it try to use it

Shiva465 said:
II have a micromax canvas juice 3 plus it is also a tough phone to root Kingroot, Oneclick root, Kingoroot, Root genius nothing worked but i root means vroot worked on it try to use it
Click to expand...
Click to collapse
No buddy! Negative.
Because when root is impossible to get even after flashing any supersu zip file via twrp [the most complicated and HAS TO ROOT ANY DEVICE method], rooting it within just apk or exe root applications is absolutely nothing in comparison.
Neither of apks/exes work. I've tried all [don't even need to try, because while supersu doesn't get flashed, no other alternative would root a device]
Moreover i have found a Cyanogenmod 13 for this device which is pre rooted.
Will post it on the ROMs section soon. .

can you make a custom recovery of micromax q394
mr_unpredictable said:
No buddy! Negative.
Because when root is impossible to get even after flashing any supersu zip file via twrp [the most complicated and HAS TO ROOT ANY DEVICE method], rooting it within just apk or exe root applications is absolutely nothing in comparison.
Neither of apks/exes work. I've tried all [don't even need to try, because while supersu doesn't get flashed, no other alternative would root a device]
Moreover i have found a Cyanogenmod 13 for this device which is pre rooted.
Will post it on the ROMs section soon. .
Click to expand...
Click to collapse
can you make a custom recovery of micromax q394 for me because i am finding it from nearly 3 months but I can't find anything i also used mtk droid tool but its not connecting

Shiva465 said:
can you make a custom recovery of micromax q394 for me because i am finding it from nearly 3 months but I can't find anything i also used mtk droid tool but its not connecting
Click to expand...
Click to collapse
Honestly this is off-topic, that you are asking for!
But don't worry, I'm always here to help.
Just send me the recovery.img of your device!
I will do the rest.

Thank You
mr_unpredictable said:
Honestly this is off-topic, that you are asking for!
But don't worry, I'm always here to help.
Just send me the recovery.img of your device!
I will do the rest.
Click to expand...
Click to collapse
Thank You Sir and sorry for late reply here is the recovery.img and boot.img https://drive.google.com/drive/folders/0Bz8yycdSQdvBMEdHdU1vUEVoOTQ?usp=sharing

Shiva465 said:
Thank You Sir and sorry for late reply here is the recovery.img and boot.img https://drive.google.com/drive/folders/0Bz8yycdSQdvBMEdHdU1vUEVoOTQ?usp=sharing
Click to expand...
Click to collapse
Hey, never mind! I have ported and uploaded 2 TWRP recoveries in the link below to My Google Drive.
https://drive.google.com/open?id=0B7Cl4N8BpGmgcm55NWNTUTBIUGs
Flash it via SPFlashTools and let me know which version works the best!
And yeah, don't call me sir, just call me avi.
Ciao!

Both are not working
mr_unpredictable said:
Hey, never mind! I have ported and uploaded 2 TWRP recoveries in the link below to My Google Drive.
https://drive.google.com/open?id=0B7Cl4N8BpGmgcm55NWNTUTBIUGs
Flash it via SPFlashTools and let me know which version works the best!
And yeah, don't call me sir, just call me avi.
Ciao!
Click to expand...
Click to collapse
Both of this are not working avi a tried both it gives a white screen and then reboots phone