Note- Before doing this, please ROOT your Lava Iris 458q. for rooting check this link
http://forum.xda-developers.com/showthread.php?p=49976717#post49976717
link to Download necessary file https://drive.google.com/folderview?id=0B74Xjste8p2VNmZGQWxvNTAteWc&usp=sharing
Note:-Please put all this in one singe folder)
Instructions:-
1. Install all Drivers inside that downloaded folder.
2. Put your phone in USB debugging mode from Developer Options in the Settings Menu. (If you cant find the Developer options, go to Settings> About Phone and tap the "build number" 8 times.)
3.Connect your phone to the computer. (In USB storage mode)
4. Open MtkDroidtools.exe from the folder MTK droid tools you downloaded before.
5. Wait till the device is detected (on the bar at the bottom)
6.Click on the ROOT button. and wait till the process is done.
7. Now go to the "root,backup,recovery" Tab.
8. from the 2nd box, select the option "To choose the boot.img file"
9.Click on the button "Recovery and Boot" and choose the Boot.img file downloaded before.
10. Click YES on the next popup asking Automatic CWM and YES on ALL the following popups.
After Reboot, the phone is successfully in CWM recovery MODE !!! (Use Volume up and down buttons to navigate and Power button as Enter)
Now that you have install CWM,
Note:-use windows 7 or lower version windows
Alternate Method
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:
yes it perfectly worked and rooted my phone.
patel_s said:
to flash recovery from your phone use this app link-https://play.google.com/store/apps/details?id=com.cgollner.flashify.
and link for recovery image is http://www.mediafire.com/download/9h56vdmnkkwofjt.
flash it happily...:victory:
Click to expand...
Click to collapse
Can u provide rooting method for lava iris x1 because vroot method is not working... It has KitKat running on it.
Sent from my iris X1 using XDA Free mobile app
Related
Lava E-tab Z7H has a very worst recovery system. So I am giving a new CWM based recovery mode.
Advantages of recovery mode-
1. You can backup your total tablet system to your internal/external SD card.
2. If you face software related any problem again you can enter into the recovery mode & restore the tablet back to the same position earlier you are at the time of backup.
Steps-
1. Download this zip file. CWM_Recovery ( ) or Billionupload ( ) or Mediafire ( )
2. Extract the zip file.
3. Connect your lava tablet & make sure it is on.
4. If you have not installed the driver for this driver in your pc then
a) Go to device manager ("Win Key + r" then type "devmgmt.msc").
b) See an yellow unknown device which driver is not installed. Click on that & click update driver.
c) Then "Browse my computer for driver" & browse to your extracted zip file folder.
5. After updation of driver finished you have to click "1.##Recovery.bat" from the extracted folder. Make sure your tab is connected to pc & switched on.
6. Click 'y' in the command window & press any key to continue when prompted by command window.
7. Now your tablet will reboot into CWM-based recovery mode. You can see a HAT.
8. Bingo!! You are done in installing your new CWM recovery. Read next very Important.
How to backup you full System-
1. In the recovery menu you can see many option like "reboot system now"...to "advanced", with a HAT .
2. Use your volume up & down button for navigate & power button to Enter.
3. Now go to "backup and restore".
4. Now click on "backup to internal sdcard" (Recommended) or if you have an external sd card just click "backup".
5. Now sit back for 5-10 min. & let it do the whole system backup. Don't touch your tab.
6. After it says finished backup shut down your tab by long press power button.
8. Bingo!! You have backed up your Total tablet. Now Go on no need of formatting the tablet & re-installing of all your fav. apps again & again.
How to restore to your previous backup-
1. This process is little bit harassing.
2. Switch on your tab & listen to a small sound (tap) 1 sec. after you switch on at the time of small android logo.
3. Press the volume up key suddenly or it will enter into the home as usual.
4. If you miss it then you have to try again the above steps again.
5.After entering into the recovery mode go to the "backup and restore" and then "recover from internal memory".
6. Bingo!! Now you are done with your restoration. Switch off & then switch on your tab.
PRESS THANKS IF I HELP YOU IN ANY MEANS.
can i use this procedure for lava iris N400?
drganbds said:
can i use this procedure for lava iris N400?
Click to expand...
Click to collapse
I think no. Your device may die.
Please help me to flash cwm recovery on lava iris N400...
The stock recovery is in chinese language how do I change it to english?
Sent from my N400 using xda premium
drganbds said:
Please help me to flash cwm recovery on lava iris N400...
The stock recovery is in chinese language how do I change it to english?
Sent from my N400 using xda premium
Click to expand...
Click to collapse
Sorry I am not a developed. You can start a thread in Xda seeking help from xda developer team.
What ever I know I have shared.
helloansuman said:
Sorry I am not a developed. You can start a thread in Xda seeking help from xda developer team.
What ever I know I have shared.
Click to expand...
Click to collapse
Thanks for reply
Sent from my N400 using xda premium
Today I am sharing how to root MMX A110 using sp flash tools
First you need some things download below
1) CWM recovery
http://d-h.st/Ky2
Thnxx @suhas.holls
2) MMX A110 Drivers
http://www.mediafire.com/?5ai8nwihmp30grw
3) VCOM drivers
http://www.mediafire.com/?3wec990b42j3nn7
4) SP flash tools
http://www.mediafire.com/?b111ivr9it76cma
5) Supersu.zip
http://www.mediafire.com/?i1y443she8hlby6
6) MT6577 scatter file
http://www.mediafire.com/?2cp7i70khi8fe84
Now after downloading all things
1)Install The drivers in your PC or lappy whatever, window xp or 7 should be used.
2)Now first copy supersu.zip into root(out of every folder)of your phone's SD card
3) Now in developers option tick USB Debugging
4) Switch off the phone remove then replace battery and connect it to PC now your PC will install MTK preloaders.
5) Now remove data cable and don't turn on the phone, if its turned on itself then turn it off
6) Now open sp flash tools folder and open spflashtools.exe , search for the option "Scatter-Loading" and click on it and locate the scatter file you downloaded.
7) A list will appear then untick all except"Recovery"
8) Click on recovery and locate the cwm recovery you downloaded.
9) After selecting recovery insert data cable in PC and not in phone only connect one side i.e. to the PC.
10)Now click on download button and a countdown will start in the lower progress bar then connect your phone (in switched off state) Then a yellow bar and a green bar will appear and after that a green ring will appear saying "Download OK".
Your phone's recovery is now cwm.
11) Now remove phone and press Volume up volume down power key simultaneously and a mode will appear with two option recovery mode and factory mode.
12) Using volume up choose recovery mode and press power key.
13) then choose again recovery mode and press volume down key.
14) Now choose Install a zip from SD card and select"supersu.zip"And after installing it reboot your phone.
After rebooting you will find an app named Supersu
Hurray Your phone is rooted and now it has endless things to do.
Remember- Rooting void your phone's warranty
If you liked my work, please Hit thanks button it will motivate me and won't cost you.
Important
avinash130413 said:
Today I am sharing how to root MMX A110 using so flash
I am not responsible if anything happens to your phone, do at your own risk..
Click to expand...
Click to collapse
Root : JB 4.2
Root LAVA iris 300
1. Download The Framaroot APK here and install it to your phone.
2. Goto Settings > Security > and tick “Unknown Sources“.
3. Run Framaroot, choose Superuser or SuperSU.
4. Select Boromir or Bahamir.
5. You will see Success.
6. Reboot device, Done. :good:
OR
1. Download The Kingoroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Stock Rom : JB 4.2
Unbrick your LAVA iris 300
1. Download Stock Rom from here (by xdafirmware)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (dnt press any key, flash with battery).
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your LAVA iris 300
You can take full backup with Custom recovery (Carliv/TWRP).
OR
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet+ andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see “Developer options” there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.
10. Prepare this backup to make it flashable through SP Flash Tool. To do it, click on To 'prepare blocks for Flash Tool.'
11. A new windows will appear asking for a .md5 file of the backup. So navigate to the MTK Droid Tools folder where your backup is found. Open the backup that your have created earlier and select the files.md5 click open.
12. Wait for MTK Droid Tools to copy the files for SP Flash Tool, check the status messages until the copying/task is complete. Done
Full Instructions with images here (by rajit).
Restore :
1. Open , SP Flash Tool.exe run as administrator. Load the scatter file (click scatter-loading) which you have prepared from MTK Droid Tools to be flashable through SP Flash Tool.
2. After you loaded scatter file, All must checked except for Cache and USERDATA and most importantly, do not check DSP_BL or Preloader else you'll brick it.
3. To restore device, click Download from SP Flash Tool, a prompt will appear, just click Yes. Immediately connect your Power OFF device to your computer via USB .
4. Wait for the tool to detect your device and restore the Stock ROM that you have made. An alert with a green circle appears after successfully downloading the restore.
Full Instructions with images here (by MTK Hacker Pro).
Custom Recovery : TWRP/CTR
( Download and flash it with Sp FLash tool. Press Vol up and Power Key to boot in Recovery. )
Twrp for LAVA iris 300
TWRP2.8.0 alpha here
Note : There is lots of bug in it. pls post here.
CTR for LAVA iris 300
Carliv 2.4 alpha here
Note : Flipped Screen Bug.
wahh! Now just make a best kitkat rom for 300 plz!! ur gr8
Root : JB 4.2
Root Micromax A37B
1. Download The Kingroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Full Instructions here
Stock Rom : JB 4.2
Unbrick your Micromax A37B
1. Download Stock Rom from here (by firmwarefiles.com)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (without battery)
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your Micromax A37b
Method 1:
You can do full backup/restore with Custom recovery (Carliv/TWRP).
Method 2:
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see 01Development there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.Done.
Full Instructions with images here (by rajit)
Custom Recovery
(Press Vol up and Power Key to boot in Recovery.)
You can flash it via fastboot.
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
OR
You can flash via SP flashtool.
Ctr recovery for Mmx A37b
Ctr 2.2 here ( by programmer Shekhar.Hardknox)
deleted
method not working for marshmallow
kuberrocks96 said:
Hello Guys,
Today i Kuber Sharma will tell you how to Root your Coolpad Note 3 Lite.
In this Tutorial i will tell how to Root:-
1 CoolUI 6.0 - Lollipop
2. CoolUI 8.0 - Marshmallow
Rooting CoolUI 6.0 Lollipop
Download:-
KingRoot app
TWRP CN3L
Note :- Good Net connection required.
1.Download KingRoot.apk
2.Open it
2.Click on Root
3.Wait for it to Complete
4.Done , You are rooted.
5.Now Download Flashify app and download TWRP
6.Open Flashify App and install Recovery
7.Reboot To TWRP
8.Reboot to System
9.Done , TWRP also Installed
https://youtu.be/2jeytBBUTdo
Rooting CoolUI 8.0 Marshmallow
Download :-
Super SU System less zip
Android_mt6735_scatterfile
Sptooldrivers
MTK drivers
Spflashtool
TWRP for CN3L
INSTALL SP Flash tool Drivers and MTK Drivers - Now Reboot.
Create a new folder name it TWRP and paste "recovery.img" and "MT6753_Android_scatter.txt" files into thisl folder.
Extract Spflashtool
Now right click on "flash_tool.exe" and run as administrater,after flashtool start,click on "scatter loading" and select "MT6753_Android_scatter.txt" .
Click on "download"(on left top side with green colour icon in spflash tool).
Now switch off phone and connect to Pc via USB cable
If everything fine then you will see a pop up with green tick.
Disconnect phone from PC.
Press Volume up and Power button till recovery comes on the screen(This is important step,don't boot into normal mode,after flashing recovery you have to direclty go to recovery mode by pressing Volume up + Power button similtaneously).
If you get Unmodified System Partition warning then swipe right to allow modifications.
Select "Install"
Select SuperSU-v2.78.zip ( System less Super SU )
Swipe right to confirm flash
Reboot the device.
Note:- if you found no superSU app on reboot,then reboot to recovery and flash superSU again.
Done , Your Device is Rooted.
Steps for driver installation in windows 8,8.1 and 10 users:
**Click the Start Start menu and select Settings.
**Click Update and Security.
**Click on Recovery.
**Click Restart now under Advanced Startup.
**Click Troubleshoot.
**Click Advanced options.
**Click Startup Settings.
**Click on Restart.
**On the Startup Settings screen press 7 or F7 to disable driver signature enforcement.
Your computer will restart and you will be able to install non-digitally signed drivers. If you restart your computer again the driver signature enforcement will be re-enabled.so don't restart again before successful installation of both drivers
Subscribe to my channel for more Videos on COOLPAD Note 3/Lite:-
https://youtu.be/aKQkdMj2iDE
Click to expand...
Click to collapse
I AM GETTING AN ERROR WHILE DOING THE ABOVE METHOD
I AM SENDING U LINK OF SCREENSHOT OF THE ERROR
https://drive.google.com/open?id=0B45g_zhLbKf7alRnUU9VZDBQdDQ
PLZ DO REPLY TO ME
jash gopani said:
I AM GETTING AN ERROR WHILE DOING THE ABOVE METHOD
I AM SENDING U LINK OF SCREENSHOT OF THE ERROR
https://drive.google.com/open?id=0B45g_zhLbKf7alRnUU9VZDBQdDQ
PLZ DO REPLY TO ME
Click to expand...
Click to collapse
Installed drivers?
im getting the same error
I don't see link for twrp recovery
Hey thanks for all the tutorial but i don't see the link for twrp recovery.
Jeron p wilson said:
Hey thanks for all the tutorial but i don't see the link for twrp recovery.
Click to expand...
Click to collapse
Added