Database Info

Cherry mobile Omega HD (i-mobile IQ6)

Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
rooted
init.d
signal tweaks
3g tweaks
battery tweaks
gpu rendering
dns tweaks
media tweaks
v6 supercharger
kickasskernel
crossbreeder
reorganized build.prop file
uploading
http://www.4shared.com/folder/dJXI2ODd/_online.html
try open first in case of corrupt file
remove crossbreeder for much better battery
flash uninstall zip http://forum.xda-developers.com/showthread.php?t=2113150
and underclock for much longer battery download setcpu or no frillcpu or anything u want i dnt care..
save rom in SD card
reboot to CWM/TWRP
install rom via SD card
reboot
I'm not responsible for any loss of data or brick....
i think this only works on iq6A

do you already own this phone?

Cherry mobile Omega HD info states that its a dual core phone while all info about i-mobile IQ6 states its a single core phone. does anyone know which mediatek chipset the Omega HD uses? It's GPU?

yes i had it

How?
How can we flash the CWM to the Omega HD if you don't even give us a flashtool? Is this Rooting process tested? is it working?

Please help me
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
Sir, can I have a copy of the Setting.apk of your Cherry Mobile HD? i've accidentally forgot to have a backup of it and now, i've accidentally just erased it. please help me. thankyou very much

Pretty Please?
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
please post the Settings.apk of the Cherry Mobile Omega HD sir. I really need it it would be appreciated if you post it here.

How to Backup the phone
just bought the phone yesterday
do yo guys know how to back up this jellybean phone?

Hey guys, if you have FB we have a group with most of oHD users. Just search "CherryMobileOmegaHD" in FB (can't post links yet. sorry)
There are custom roms in the group, the usual rom cooked from dsdixda's kitchen (zipalign, deodexed, rm bloatwares)
@cyzarine
What do you mean with backup? We have the stock rom in the group, you might want to check it out.

Bummer! I'm stuck at step 3!
You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
Click to expand...
Click to collapse
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!

anyone have a kernel that have oc"?

In need...
Woke up to a drained Omega HD today.
Plugged it in to have it charged.
Switched it on afterwards.
"OmegaHD" flashed before my eyes, followed by a blank screen with the familiar Cherry Mobile tune playing on the background. And then nothing! NO DISPLAY! I touch the screen and there are sounds playing to confirm each press, which means I am pressing on the right places -- only that there is NO DISPLAY APPEARING.
I switch it on and off, still the same results.
Wiped cache. Nothing... Since it's practically new, I go ahead and factory-restore the thing... still the same results. NO DISPLAY! :-S
What else can I do to this device to have it work properly?!

Have you installed any custom rom or any other zip files with your phone?

xMinistro said:
Have you installed any custom rom or any other zip files with your phone?
Click to expand...
Click to collapse
do have stock rom can you give plsss......

---------- Post added at 11:02 PM ---------- Previous post was at 10:41 PM ----------
[/COLOR]
Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
Click to expand...
Click to collapse
Hi. Can you please post a mirror on the twrp-omegahd.img file? All of the other files have been downloaded except for the img file. Error comes up.

bakes5981 said:
Bummer! I'm stuck at step 3!
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!
Click to expand...
Click to collapse
please hit thanks if this helps

OmegaXtremeHD link issues
OmegaXtremeHD link is not working .... 509 error .... any mirror or alternative links?

Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
init.d
signal tweaks
3g tweaks
battery tweaks
v6 supercharger
kickasskernel
crossbreeder
download link
https://www.dropbox.com/s/8q1c6db45uegepk/OmegaXtreme.zip
updated link
save rom in SD card
reboot to CWM/TWRP
WIPE DATA/FACTORY RESET
install rom via SD card
reboot
Click to expand...
Click to collapse
Hey buddy,
Where's the file..??

StanleyD said:
Hey buddy,
Where's the file..??
Click to expand...
Click to collapse
will update link later

having trouble with some apps working on my Omega HD. a couple of my Android mainstays are Haxsync and Swiftkey. on my Omega HD, they run no problem, but if the unit powers off for whatever reason, when I turn it back on, my Haxsync account (under Settings/Accounts) disappears, requiring me to set up the app again, and Swiftkey is no longer activated as my default input. any help?

[ROM][ROOT][CWM] Gionee Dream D1/GN878 - Stock De-odexed ROM with root and busybox

I no longer have this phone (GiONEE Dream_D1), I'm also going to stay away from Mediatek SoCs.
No more support for this device in this thread. If anyone wants to take over, please do. Thanks everyone who participated and encouraged me.
Link to the stock deodexed rom available in post #2 below.
For increasing the internal storage to 2GB from 1 GB, follow the instructions by @RickyGoldsmith here http://forum.xda-developers.com/showpost.php?p=41966897&postcount=3
-------------------------------------------------------------------------------------------------------------------------------------
Stock Factory ROM root instructions:
Download the zip file named motochopper.zip from the First Post of this thread here: http://forum.xda-developers.com/showthread.php?p=40747604
Thanks and Credits to djrbliss
YOU ARE DOING THIS AT YOUR OWN RISK.
Instructions:
Extract the entire contents of the zip file.
If you are using Windows, ensure you have installed the latest MediaTek USB drivers available for your phone. Download link for the MediaTek drivers here: http://goo.gl/A7gnp
Ensure USB Debugging mode is enabled on your device.
Connect your device to your PC via USB.
Run run.bat from the extracted folder.
Follow the instructions on screen, when everything is done, the phone will reboot.
Voila! Now your Gionee Dream D1/GN878 will be rooted.
CWM Recovery for Gionee Dream D1/GN878
Steps to install CWM recovery: YOU ARE DOING THIS AT YOUR OWN RISK.
1. Install the MTK USB Drivers for the phone. If you had followed the above steps to root then You have the drivers installed.
2. Download the SP Flash tool, with the scatter file and the recovery.img. Download link here: http://goo.gl/SD9kh
CWM Version 6 available here http://forum.xda-developers.com/showthread.php?p=43039475#post43039475 thanks to @deepak2111
3. Extract the zip file and run the Flash_tool.exe
Leave all the options as default, do not tinker with any settings, except pointing to the correct scatter file.
4. The scatter file and the recovery.img are placed in a folder named DreamD1 in the extracted folder.
In the Flash tool, click on scatter-loading button and select the file named MT6589_Android_scatter_emmc_PMT.txt
The recovery will be auto selected as shown in the image below: DO NOT CHECK ANY OTHER CHECKBOXES.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Click on the Download button. DO NOT CLICK ON Firmware->Upgrade Button, it will brick your Phone
6. Remove the phone from the USB cable
7. Switch off the phone, wait till you feel the vibration. Wait for another 30 seconds
8. Now plug in the phone to the USB cable without turning on the Phone.
As soon as the phone is detected, the recovery image will be installed.
Voila!, Now you phone has CWM recovery installed.
After the recovery installation, remove the phone from the USB Cable.
To go to Recovery Mode: KeepPressing Power + Volume Up Keys. You should now be greeted with CWM recovery menu.
Please HIT the Thanks button if you feel I deserve it.
Note: Just found out that the Chinese Model number for Dream D1 is GN878

Hybrid Stock ROM De-Odexed, Zipaligned rooted with busybox - best of Primo-X1 and Dream D1
Kernel aka boot.img is included in the rom zip as we now have the MTK6589 SoC sources.
Copy the downloaded Zip to External SD Card.
Reboot to CWM Recovery
Do Factory reset.
Flash this using CWM Recovery.
Download Link:: https://copy.com/frhv3
Known Bugs:
Selecting Wallpaper from Settings->Display->Wallpaper FCs.
Please let me know, if you come across any bugs here in this thread.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
GiONEE Dream_D1 Stock deodexed ROM with root and busybox.
Copy the downloaded Zip to External SD Card.
Reboot to CWM Recovery
Do Factory reset.
Flash this using CWM Recovery.
Download Link:: https://copy.com/yRrfRMDNBE4A
MT6589 SoC Kernel source: https://github.com/varunchitre15/MT6589_kernel_source
Credits to varunchitre15 for the kernel sources.

MIUI
How about porting MIUI to start with?
I am already running MIUI Home Launcher and it is a breeze. Do you have any experience with porting ?
I looked at: http://forum.xda-developers.com/showthread.php?t=1827256 and it looks straight forward. What I am not sure is how much these applications depend on the underneath framework.. I mean, If I take all these apk and libraries, will it work on this stock Gionee Dream D1 ROM ?

somberi said:
I'm also working on porting the CWM recovery to Gionee Dream D1. Once that is completed I shall share it here.
Click to expand...
Click to collapse
waiting for CWM ,have to get rid of this rom,every hd games opens after 10minutes

million thanks
I cant believe my eyes
I am going to root that right now, but first i am going to thank you
Great job and we will wait for your new roms
thanks

RickyGoldsmith said:
How about porting MIUI to start with?
I am already running MIUI Home Launcher and it is a breeze. Do you have any experience with porting ?
I looked at: http://forum.xda-developers.com/showthread.php?t=1827256 and it looks straight forward. What I am not sure is how much these applications depend on the underneath framework.. I mean, If I take all these apk and libraries, will it work on this stock Gionee Dream D1 ROM ?
Click to expand...
Click to collapse
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.

protocolt fault
I am getting the protocol fault, waiting for device.
Any idea the cause for that?

somberi said:
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.
Click to expand...
Click to collapse
How do you intend to get the Factory Stock ROM? Rip it from the device?
I am currently trying to play with the CWM process. Will update here how it goes...

ashishsoft said:
I am getting the protocol fault, waiting for device.
Any idea the cause for that?
Click to expand...
Click to collapse
Did you install the MediaTek drivers from the link above? Make sure you dont have the phone connected in the PDANet+ (Right click on the System Tray icon and click on disconnect. Also make sure you have USB debug enabled, under Settings->Developer Options.
If all the above fail try restarting the system and try to connect the phone to a different USB port on your computer.
let me know the results.

RickyGoldsmith said:
How do you intend to get the Factory Stock ROM? Rip it from the device?
I am currently trying to play with the CWM process. Will update here how it goes...
Click to expand...
Click to collapse
Currently looking at various Chinese forums to get a proper rom backup tool for MediaTek based devices. Also have contacted Gionee India asking them to release the Factory Stock ROM and the flashtool for the device. Micromax, Lava and many other manufactures give the Stock ROM for download.
At work now and do not have access to any of the resources here..

rooted it
sorry it got that rooted!
yeah!
now waiting for the ROMS
thanks

ashishsoft said:
sorry it got that rooted!
yeah!
now waiting for the ROMS
thanks
Click to expand...
Click to collapse
Nice to know

I am your fan somberi
You are a master, !
Great job done and keep that up
:angel:

somberi said:
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.
Click to expand...
Click to collapse
Are you able to get the boot.img image dump?
MtkTools and others create a file which is just binary data.

our stock recovery is useless...pls gv us cwm and unroot.zip too....for safety...
Sent from my Dream_D1 using xda app-developers app
---------- Post added at 01:01 PM ---------- Previous post was at 12:48 PM ----------
somberi said:
Download the zip file named motochopper.zip from the First Post of this thread here: http://forum.xda-developers.com/showthread.php?p=40747604
Thanks and Credits to djrbliss
You are performing this at your OWN RISK!
Instructions:
Extract the entire contents of the zip file.
If you are using Windows, ensure you have installed the latest MediaTek USB drivers available for your phone. Download link for the MediaTek drivers here: http://goo.gl/A7gnp
Ensure USB Debugging mode is enabled on your device.
Connect your device to your PC via USB.
Run run.bat from the extracted folder.
Follow the instructions on screen, when everything is done, the phone will reboot.
Voila! Now your Gionee Dream D1 will be rooted.
Click to expand...
Click to collapse
i hv sucsfuly rooted my dvice...waiting for cwm n unroot...
Sent from my Dream_D1 using xda app-developers app

RickyGoldsmith said:
Are you able to get the boot.img image dump?
MtkTools and others create a file which is just binary data.
Click to expand...
Click to collapse
Could not get time to investigate, too much work.. Will have to spend some time this weekend.

how to install CWM recovery/4ext
hi there
after rooting the device, i have been trying to get in the recovery, i tried using CWM and 4ext both
but everytime i try go to recovery it only shows me default factory mode, that is it. nothing else
can someone tell me why and guide me
thanks

Finally managed to get CWM recovery ported to Gionee Dream D1. Testing in progress.
Works great.
The External SD card is detected.
Did a nandroid backup, restored the back up without any problems.
Did a Factory reset and worked great.

somberi said:
Finally managed to get CWM recovery ported to Gionee Dream D1. Testing in progress.
Works great.
The External SD card is detected.
Did a nandroid backup, restored the back up without any problems.
Did a Factory reset and worked great.
Click to expand...
Click to collapse
That's great news. Thanks

On my windows 7 ThinkPad, it has never been able to detect the phone over the serial console. Perhaps I'll try it on someone else's box.

[ Auxus Nuclea N1 ] - All Things Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specs
[*]Google it before posting here.
[*]Please post any guides and/or tutorials directly onto the forum, rather than links, otherwise this thread will be closed by the Moderator.
Click to expand...
Click to collapse
Rooting for 8GB Version
Procedure:
1. Download the Framaroot application and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
[ROMs]​
Please do not flash the firmware that is not meant for your phone. Flash only 4gb to 4gb and 8Gb to 8Gb
Auxus Nuclea N1 Stock Firmware
NEW
Final Version - 11-Dec-2013 - [Flash with SPFlash Tools]
Click to expand...
Click to collapse
OLD ROMs
Firmware Update (Intermediate V1) 18-Nov-/2013 [Flash with spflash Tools]
NucleaN1_FirmwareUpdate_V1_CWM.zip
Click Here - - [09/Sep/2013] [Flash with SPFlash Tools]
CWM Zip Download from herehttp://d-h.st/b3r
8GB version -
Click Here - [Flash with SPFlash Tools]
Custom ROMs
Click HERE​
How to Flash Stock ROM using SP Flash Tools?​
1) Unzip the ROM folder
2) Install the drivers and open SP Flash Tools..
Check the below post with images, if you are not sure whether drivers are installed or not.
If you face this problem, then try Firmware upgrade and connect the phone..
You can now safely disconnect your phone and turn it on. The process ends here.
FLASHING PATCH using SP Flash Tool(Single Files)​
1)Select Android Scatter File .txt ....
2)Uncheck all files from the below box....
3)Select the correct file you want Flash by clicking it....
4)Click Download button on SP tool.... **"Dont click Firmware Upgrade"
5)A box asks to confirm it...Click Yes...
6)Connect Phone without the battery...
7)It will get Flashed...[/COLOR]
[Recovery]​
1) Nuclea N1 Stock Recovery Click Here
2) TWRP Recovery- Click HereThanks to Kumar abhishek
3) CWMRecovery 6.0.3.3 Click Here or Click Here Thanks to C3C076
Procedure to Flash Recovery.
1) Download Mobile uncle tools from play store
2) Place the downloaded recovery.img in your sdcard
3) Open Mobile uncle tools
4) Select 'update recovery' and Click on the recovery.img
5) Reboot
adb method: For advance users:
---------------------------------------------------
Make sure you have all the drivers for your phone installed on your computer.
Make sure you have USB Debugging enabled, Install from Unknown Sources is enabled and device is detected in ADB run this command:
Code:
adb devices
Download the CWM Recovery
Press SHIFT key + Right mouse click in the folder where the file is located and select Open Command from Here.
Now, in the command prompt do the following:
a. Reboot into Bootloader mode. Use command:
Code:
adb reboot bootloader
b. Device will reboot and display logo. (check if device is in bootloader mode by running command:
Code:
fastboot devices
. If you see a device connected then you have successfully rebooted into fastboot mode.
c. Now, run this command:
Code:
fastboot flash recovery recovery.img
(This will flash the CWM recovery image to the device).
d. Once successful, reboot the device using this command:
Code:
fastboot reboot
.​
How to Backup ur complete ROM
1. In CWM Recovery mode, select Backup and Restore
2. Select Backup
3. Wait till it finishes (May take upto 10 minutes)
How to restore ur backed up ROM from SD card
1. Go to CWM Recovery, select backup and restore
2. Select Restore
3. select the folder in date format (Folder name indicates the time and date when ur backup was created}
4. Wait till it finishes (May take upto 10-15 minutes)
Special Guides for Newbies to get Started​
Everything you need to know about Clockworkmod Recovery
How to setup ADB and Fastboot properly
5 Things Every Android user should do
24 Apps Every Android User Must Install
5 Things to know before performing any Android tweak
Thanks to Driodiser
HIT THANKS PLEASE BECAUSE IT WONT COST ANY :angel:

Extend your storage on Nuclea N1
[Extend your storage on Nuclea N1] - Thanks to @kailashnj
Follow the instructions in the post HERE​
How to enter into Recovery - Nuclea N1 :-
Code:
[LIST=1]
[*]Turn OFF your phone.
[*]Press & hold Vol(+) button and Power button for 12 seconds.
[B]Stock Recovery[/B]
[*]You will see a laid-down Android symbol with 'No command' message below it. Press the power button once.
[*]You will enter into menu 'Android System Recovery'
[*]Press Vol(-) to roll over options.
[*]Press Vol(+) button to select.
[*]DONE!
[/LIST]
Another options if you are facing trouble going to recovery:
Code:
1. Install Mobile Uncle tool
2. Reboot recovery.
MTK6589 Drivers
Universal Pdanet drivers Click Here
Follow this guide Here
Tools
MTK Android PC Sync Tool V2.1233.1 Click Here
SN_Write_tool_exe_v2.1132.0.rar - 8.27 MB
Guide Here
Driver_Auto_Installer_v1.1236.00 Click here

Meta-Mode is very useful if device fails to get detected by PC under normal Conditions.....To make device fall to Meta-Mode,just do these :
1) Start SP Tool on PC..
2) Now run SP Tool with "Firmware Upgrade/Download"
3) Switch OFF Phone..
4) Remove Battery..
5) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
6) Flashing will be started
7) Hold the button till flashing completes...
After 100% Flash,Release Button..
9) Insert Battery..
10) Start Device.
Click to expand...
Click to collapse
How to dump stock recovery image using SP Flash Tool
1) Download and install USB VCOM Driver
2) Download, extract and launch SP Flash Tool
3) Use "Scatter-loading" button to load attached scatter file: MT6589_Android_scatter_emmc.txt
4) Download stock recovery image and place inside the ROM folder. Then select only RECOVERY.
5) Turn off your phone. Make sure USB cable is unplugged. Wait until vibrator indicates it's turned off
6) Click Download button in SP Flash tool, confirm warning complaining about not all files being selected
7) Connect your phone and wait for the flash process to finish (indicated by window with green circle)
8) Unplug USB cable. Hold down Volume+ while turning your phone on to boot into recovery
Click to expand...
Click to collapse
Backing up your IMEI
Different Methods are available for this.
1) Use any RootExplorer to copy file /data/nvram/md/NVRAM/NVD_IMEI/MPOB_001 to your external SD card. (or if that folder does not exists, try /nvram/md/NVRAM/NVD_IMEI/MPOB_001). It is good to backup the entire folder /data/nvram/md/NVRAM.
2) Back up using Mobile Uncle utility. Click on Mobileuncle Tools --> Click IMEI Backup Restore (MTK) --> Backup/Restore
Restore your IMEI
Code:
1- Open Mobile Uncle Tools.
2- Goto Engineer Mode
3- Select Engineer mode[MTK]
4- Under Connectivity Tab go to CDS information
5- Select Radio Information
6- Select Phone1 (for the first imei)
7- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1? (instead of IMEI_1 put your first imei number)
8- hit send command
9- You will / may get a confirmation that "sent to mSend".
10-Now come back and select “Phone2?
11-at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2? (instead of IMEI_2 put your second imei number)
12-Then just reboot the phone.
13- Dial ” *#06#” to Check Imei.
Factory ROM Backup for MT65xx via MTK Droid Root & Tools For BackUp & Unbrick
It's tested and working...
How to install ADB USB driver in window 7
use this method also in window xp,if any driver not install
Google USB Driver Rev 7 ( ADB driver )
inside three dll file driver
1-WdfCoInstaller01009.dll
2-winusbcoinstaller2.dll
3-WUDFUpdate_01009.dll
link
Click Here
Before use it is necessary to check that:
adb drivers are installed. Check device manager--> unknown devices. ADB Drivers attached.
Now the Tool
Credits: umesh gaba
[MOD][4.1 4.2] Extend Phone Storage 1.5, 2.5GB A116 (Other MT6589 Devices on request)
[Solution] NVRAM WARNING: Err = 0x10
Download this zip Click Here
Prerequisites:
You have to backup IMEI of your phone (both sim slot).
Step 1 - Extract the WiFi Fix files and place them in a folder on your memory card
Step 2 - Open Root Explorer
Step 3 - Click on Mount R/W
Step 4 - Click on data
Step 5 - Scroll down to the folder named nvram
Step 6 - Open APCFG folder
Step 7 - Open APRDEB folder
Step 8 - Delete the WIFI and WIFI_CUSTOM files
Step 9 - Now copy/move the files on your sdcard to data/nvram/APCFG/APRDEB and Paste
Step 10 - After pasting both the files, close Root Explorer and REBOOT your phone.
Here is another method Click Here
The bad news is.

Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app

can you provide a review of the phone?
akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks

akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Yes, I am in batch II.

dhavalg said:
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks
Click to expand...
Click to collapse
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif&notif_t=group_activity

Hi Guys,
Even I have bought this phone and awaiting delivery, I was promised by 4th Aug. Lets see. The specs of this phone seems to be great other than the 4GB storage. I hope that apps2sd works really fine and I am able to store all my game data on the SD card. Wanted to know more info of this phone and the rom.
Regards,
Kailash

can't decide what to buy
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)

Thanks...
akashavel said:
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif&notif_t=group_activity
Click to expand...
Click to collapse
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.

:victory: Yesss... XDA Thread for Auxus Nuclea.. feeling exciting.. Best Wishes, Guy.. :good::good:

dhavalg said:
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.
Click to expand...
Click to collapse
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..

I prefer to use Titanium Backup to freeze unwanted app rather to uninstall.. this app will save lots of RAM..

without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts

Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....

ashok20205 said:
without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts
Click to expand...
Click to collapse
Yes, We can install Custom ROMs (Themed ROMs or Ported ROMs). But, with kernel sources a lot of development can happen. :good:

akashavel said:
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..
Click to expand...
Click to collapse
No need to wait for a Custom ROM. You can try One-Power-guard app, Clean master and Greenify app's.

Chris s5830i said:
Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....
Click to expand...
Click to collapse
This mobile is good at it price with the spec's. Even Micromax is not providing kernel sources. Also, compared to the support of Micromax, iBerry is doing best.

abhiek bist said:
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)
Click to expand...
Click to collapse
Check the facebook page. Then you can decide

Can you post link for CWM for nuclea N1
can you help me with the link for CWM

Jelly Bean based Micromax A110 : Install CWM Recovery and Root

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before someone fires me with questions like what's new in this, i would like to confront that I know this guide is delayed to post as on date. But having noticed there are many ppl even today still with questions about how to root Jelly Bean based MMX A110. Thought of posting this guide for those people.
Dear Visitors, Please Thank the links (XDA links) on click that i mentioned below for downloads.
Disclaimer: Rooting voids your warranty. Neither ME nor XDA will be held responsible for bricking your phone. Use at your own risk.
Downloads​1. SP Tools & VCOM Drivers
2. Micromax A110 drivers
3. CWM Recovery 6.0.3.3
4. MT6577_Android_scatter_emmc.txt
5. 7-zip
6. SuperSU-v1.04.zip
Install CWM Recovery​1. Extract MT6577_Android_scatter_emmc.zip, CWM Recovery to some path say C:\MMX\Update folder. Note: Extracted recovery must appear with filename as "recovery" mandatorily.
2. Extract SP Tools.7z with 7-zip software and locate to some path say C:\MMX\SPTOOL folder
3. Install VCOM and Micromax A110 aka Cynus Drivers.
4. Run Flash Tool.exe from extracted folder. Click Scatter-loading button and locate to the path C:\MMX\Update folder and select MT6577_Android_scatter_emmc.txt
5. Check the box RECOVERY only and Uncheck everything else.
6. Turn off your phone, Reinsert battery but don't plug in to pc now.
7. Click the Download(F9) button
8. Plug your phone (Turn off condition only) and it may ask some additional verification steps like install unsigned driver in Windows 7/8. Simply click yes install unsigned driver and wait.
9. You will see some msgs like Preloader bla bla. Just wait until you see OK button displayed on screen.
At this point CWM Recovery is installed. Click OK and disconnect your phone.
To enter Recovery: Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu
Rooting​Two ways possible.
1. Either install some Custom ROM which obviously will be pre rooted.
OR
2. Place the downloaded SuperSU-v1.04.zip in Internal or External SD. Goto CWM Recovery. Choose option Install from SD card and browse to SuperSU-v1.04.zip You will get message as installation complete. Reboot your phone. Done..!!!
Credits : @icoolguy1995 @Dark4Droid @droidiser

Good job man. This should be made a sticky. Great guide!!

There is one dos based utility to do rooting... Simply enter option for root and finish... Is this will not work with jb??
Sent from my Micromax A110 using Tapatalk now Free
---------- Post added at 02:24 PM ---------- Previous post was at 02:18 PM ----------
This tool is binary tool for rooting... jj please confirm..
Sent from my Micromax A110 using Tapatalk now Free

ck.kislay said:
There is one dos based utility to do rooting... Simply enter option for root and finish... Is this will not work with jb??
Sent from my Micromax A110 using Tapatalk now Free
---------- Post added at 02:24 PM ---------- Previous post was at 02:18 PM ----------
This tool is binary tool for rooting... jj please confirm..
Sent from my Micromax A110 using Tapatalk now Free
Click to expand...
Click to collapse
Probably you mean to say about Bin4ary tool. That worked only with ICS. I don't know if there was an update released for it to root jelly bean on MMX A110. Anyway, This method mentioned at OP will work for rooting both ICS and Jelly Bean using the well known SP Tools which is also used for flashing STOCK ROMS.

Hi bro..
No need to mention that u spend some time in making this thread.
There will be some noobs always making threads in help and troubleshoot section to ask how to root? Thats because i think that they never used that search button to find out existing threads. If they are directed to any present thread than they are able to root easily. IN SHORT THEY ARE IN THE HABBIT OF SPOON FEEDING!
Well by the way good work buddy.:thumbup:
Nice tutorial.:thumbup:

[email protected] said:
Hi bro..
No need to mention that u spend some time in making this thread. But there are already same threads like this and think with almost equal detail.
There will be some noobs always making threads that how to root? Thats because i think that they never used that search button. If they are directed to any present thread than they are able to root easily.
Well by the way good work buddy.:thumbup:
Click to expand...
Click to collapse
Hi buddy..I mentioned those first few lines bcz sometimes it happens some ppl with typical mindset having sound knowledge ll jump in and try to show off just to avoid those rude comments I had mentioned. Agree I saw threads alike. But as u said, they weren't with clear title and instructions at op. Biggest confusion to ppl mindset was when jelly bean came out and bin4ary tool couldnt root. So thought a separate guide could be clear enough and helpful for newbies thanks for the appreciation.
Sent from my GT-I9500 using Tapatalk 4

Oh sorry bro....
I actually wanted to say something else but now I think that I had conveyed something else.
By saying "noob" i actually pointed out those persons who make threads in help and troubleshoot section for asking "how to root" and not at all you.
I referred to them when i said that they never used search button and make the same threads again and again in this hope that they will receive a link of that threads....(they always wanted to be spoon feeded)
Edited my previous post. Now it is what i actually wanted to say. Still if u feel i am one of that typical mindset person than i will delete that post.

[email protected] said:
Oh sorry bro....
I actually wanted to say something else but now I think that I had conveyed something else.
By saying "noob" i actually pointed out those persons who make threads in help and troubleshoot section for asking "how to root" and not at all you.
I referred to them when i said that they never used search button and make the same threads again and again in this hope that they will receive a link of that threads....(they always wanted to be spoon feeded)
Edited my previous post. Now it is what i actually wanted to say. Still if u feel i am one of that typical mindset person than i will delete that post.
Click to expand...
Click to collapse
Hey common brother you need not be sorry , its just a misunderstanding i didn't mean the last reply for you mate. It was in general bcz i noticed these happening here and there in our mtk community threads IT WASN'T FOR U JATIN BUDDY

my volume key is not working
hi... my volume (-) key is not working... is there any other method to go in recovery menu?

Praveen
can u please sugest me for canvas a111 actually canvas a111 dont have any scatter file na how can i install in canvas a111 please help me
==vj== said:
Before someone fires me with questions like what's new in this, i would like to confront that I know this guide is delayed to post as on date. But having noticed there are many ppl even today still with questions about how to root Jelly Bean based MMX A110. Thought of posting this guide for those people.
Dear Visitors, Please Thank the links (XDA links) on click that i mentioned below for downloads.
Disclaimer: Rooting voids your warranty. Neither ME nor XDA will be held responsible for bricking your phone. Use at your own risk.
Downloads​1. SP Tools & VCOM Drivers
2. Micromax A110 drivers
3. CWM Recovery 6.0.3.3
4. MT6577_Android_scatter_emmc.txt
5. 7-zip
6. SuperSU-v1.04.zip
Install CWM Recovery​1. Extract MT6577_Android_scatter_emmc.zip, CWM Recovery to some path say C:\MMX\Update folder. Note: Extracted recovery must appear with filename as "recovery" mandatorily.
2. Extract SP Tools.7z with 7-zip software and locate to some path say C:\MMX\SPTOOL folder
3. Install VCOM and Micromax A110 aka Cynus Drivers.
4. Run Flash Tool.exe from extracted folder. Click Scatter-loading button and locate to the path C:\MMX\Update folder and select MT6577_Android_scatter_emmc.txt
5. Check the box RECOVERY only and Uncheck everything else.
6. Turn off your phone, Reinsert battery but don't plug in to pc now.
7. Click the Download(F9) button
8. Plug your phone (Turn off condition only) and it may ask some additional verification steps like install unsigned driver in Windows 7/8. Simply click yes install unsigned driver and wait.
9. You will see some msgs like Preloader bla bla. Just wait until you see OK button displayed on screen.
At this point CWM Recovery is installed. Click OK and disconnect your phone.
To enter Recovery: Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu
Rooting​Two ways possible.
1. Either install some Custom ROM which obviously will be pre rooted.
OR
2. Place the downloaded SuperSU-v1.04.zip in Internal or External SD. Goto CWM Recovery. Choose option Install from SD card and browse to SuperSU-v1.04.zip You will get message as installation complete. Reboot your phone. Done..!!!
Credits : @icoolguy1995 @Dark4Droid @droidiser
Click to expand...
Click to collapse

Recovery mode
Thanks for the detailed post. Can you please tell me at which point exactly I should enter into recover mode I mean to ask when do I do the following ?
" Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu"
==vj== said:
Before someone fires me with questions like what's new in this, i would like to confront that I know this guide is delayed to post as on date. But having noticed there are many ppl even today still with questions about how to root Jelly Bean based MMX A110. Thought of posting this guide for those people.
Dear Visitors, Please Thank the links (XDA links) on click that i mentioned below for downloads.
Disclaimer: Rooting voids your warranty. Neither ME nor XDA will be held responsible for bricking your phone. Use at your own risk.
Downloads​1. SP Tools & VCOM Drivers
2. Micromax A110 drivers
3. CWM Recovery 6.0.3.3
4. MT6577_Android_scatter_emmc.txt
5. 7-zip
6. SuperSU-v1.04.zip
Install CWM Recovery​1. Extract MT6577_Android_scatter_emmc.zip, CWM Recovery to some path say C:\MMX\Update folder. Note: Extracted recovery must appear with filename as "recovery" mandatorily.
2. Extract SP Tools.7z with 7-zip software and locate to some path say C:\MMX\SPTOOL folder
3. Install VCOM and Micromax A110 aka Cynus Drivers.
4. Run Flash Tool.exe from extracted folder. Click Scatter-loading button and locate to the path C:\MMX\Update folder and select MT6577_Android_scatter_emmc.txt
5. Check the box RECOVERY only and Uncheck everything else.
6. Turn off your phone, Reinsert battery but don't plug in to pc now.
7. Click the Download(F9) button
8. Plug your phone (Turn off condition only) and it may ask some additional verification steps like install unsigned driver in Windows 7/8. Simply click yes install unsigned driver and wait.
9. You will see some msgs like Preloader bla bla. Just wait until you see OK button displayed on screen.
At this point CWM Recovery is installed. Click OK and disconnect your phone.
To enter Recovery: Press Volume Up + Volume Down + Power button together for few seconds until you get menu with options like Recovery and Factory reset. Select option Recovery by pressing Volume Up button. Another menu with 3 options will appear namely Recovery Mode, Fastboot Mode, Normal. Select Recovery mode by pressing Volume Down button. Here you go into CWM Recovery menu
Rooting​Two ways possible.
1. Either install some Custom ROM which obviously will be pre rooted.
OR
2. Place the downloaded SuperSU-v1.04.zip in Internal or External SD. Goto CWM Recovery. Choose option Install from SD card and browse to SuperSU-v1.04.zip You will get message as installation complete. Reboot your phone. Done..!!!
Credits : @icoolguy1995 @Dark4Droid @droidiser
Click to expand...
Click to collapse

[ROOT+TWRP 2.7.1.0] Auxus Note 5.5 / Elephone P2000 / MLAIS NOTE PRO (SPFT Method)

***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5 (Download New Recovery image file by me from this thread)
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
​

Thanks
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.

baskye said:
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
Click to expand...
Click to collapse
I am glad to see first person who rooted with the help of my tutorial and files. That also confirms the steps are perfect. Actually worked for me so should work for all. Thanks a lot for your faith and trust in me. Will be around for more developement and roms.

Success!
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436

Using the note for about 2weeks. Rooted successfully. Titanium backup is not working properly. Any solution for it.
Also the network refresh is poor. So network switching is very slow and many times have to manually do refresh or reboot.

latest twrp recovery
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.

flashing the preloader is not necessary though is it?

Yes it is not necessary

hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:

mojahun said:
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
I am not sure if above USB driver is useful or not. But when you connect MT6592 Phone to PC without Battery, the PC shows a box with
"Searching drivers for YunOS system"
and if Internet is connected , it will download a tiny driver automatically from Microsoft site for Chinese Mobile Phones and an entry in Device Manager appears like
"YunOS ACB Interface"
Now Flashing Tool will automatically connect your phone to pc on next available COM PORT (COM3 or COM4 etc.)
So it is not USB Driver. It needs YunOS ACB Driver. You can find it separately somewhere on net, if searched.
baskye said:
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
Click to expand...
Click to collapse
Download my version of TWRP 2.7.1.0, which is tested and works perfect, includes Mount USB Storage and you can transfer files in Recovery mode.
Ito_ said:
flashing the preloader is not necessary though is it?
Click to expand...
Click to collapse
No, Preloader is not necessary but in case it is wiped or corrupted, its good to flash the original provided by company makers. I have included all Preloaders directly from respective company stock roms
sandeep101 said:
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
Click to expand...
Click to collapse
YEAH! I am always around in XDA, for the phone in my hand Thanks for appreciation

SCATTER file and Recovery for two more clone models.
Hi A L L!!!
Posted SCATTER file and Recovery for two more clone models.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
Choose wisely.

Nothing happening
cmahendra said:
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
​ ​
​
Click to expand...
Click to collapse
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.

Techminator said:
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Click to expand...
Click to collapse
Seems drivers are not properly installed. These are new drivers by iBerry.
1) Uninstall any android driver you installed before from ControlPanel/Programs. Reboot/Restart PC/Laptop
2) Install this USB Preloader Driver http://d-h.st/kcH (from iBerry)
3) Then Install this SPFlashtool Driver http://d-h.st/vRd (from iBerry)
4) Reboot PC/Laptop/Computer , Keep pc connected to Internet on all the time. DO NOT yet connect phone to pc.
5) After computer restarts Run SPFT "flash_tool.exe" and press DOWNLOAD button
6) Now connect phone (without battery) to pc. Let windows install drivers, then flashing will start in less than 5 min. Dont wait for hours.
Hope this helps and inform if works.
PS: For GOD's sake do not quote whole opening post in your queries. Do you want me to read my own thread? Hope you have read XDA basic terms and conditions.

Rooted!
cmahendra said:
Seems drivers are not properly installed. These are new drivers by iBerry.
Click to expand...
Click to collapse
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.

Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work

Techminator said:
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Click to expand...
Click to collapse
I dont use or recommend Xposed FW. You can use as per your requirement. Works fine.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
Yes, flip cover by iBerry is costly and even I am also looking for low-cost option.
falcon.prj said:
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Click to expand...
Click to collapse
For icons size to change use any other launcher, like google now or nova or any other you want.
Move Titanium App to internal memory or install Link2SD, check settings and then install Titanium Backup. plz google for more info on titanium.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.

For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.

baskye said:
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
Click to expand...
Click to collapse
Thanks a lot for this good tip/method. +1 plz post link to exact file/version.

Here is the download link
http://download.clockworkmod.com/superuser/superuser.zip

Does not work
This method does not work after I download and flash with the latest firmware (13 Oct 2014) from iBerry site.