CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4, which is designed to increase performance and reliability over stock Android for your device.
I am NOT the device maintainer for AT&T LG G2 D800, if/when an official maintainer would like to take this post over contact me/mod and we will have it transferred. I just posted this for info until CM gets an official maintainer here.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/d802_Info
Instructions
First time flashing CyanogenMod 10.2 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 10.2:
Copy CM10.2 ZIP & GApps to your SDCard
Boot into Recovery
Flash CM10.2 zip & Gapps from SDCard
Reboot
CM11 official nightly builds:
HERE
Google Apps:
http://wiki.cyanogenmod.org/w/Gapps uses latest 4.4 GApps
ClockworkMod-Recovery:
http://www.clockworkmod.com/rommanager
or
HERE with Loki enabled
Changelog
HERE
All credits to CM Team!!!
I just posted this here for info.
EDIT: OP got good link now
all cleared up...nothing to see in this post
T-Mobile version please
Sent from my LG-D801 using XDA Premium 4 mobile app
TerMAESTRO said:
T-Mobile version please
Sent from my LG-D801 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And they thought att would be last
Sent from my LG-D800 using Tapatalk
stuck in cyanogenmod boot screen
install cm10.2 just fine. booted back into recovery and installed latest gapps and it shut off during install, rebooted and now im stuck in the cm boot screen. help please
trh1341 said:
And they thought att would be last
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Who are "they"?
Sent from my LG-D801 using XDA Premium 4 mobile app
manojsuper said:
Reboot into recovery and do the process over
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im having issues rebooting in to recovery. cant find the right combo
kenlester said:
im having issues rebooting in to recovery. cant find the right combo
Click to expand...
Click to collapse
Focus and you will get it.
Sent from my LG-D800 using XDA Premium 4 mobile app
Any reason to get CM over AOKP these days? I know AOKP isn't out yet, if ever. I just haven't looked at CM in years, since I had it on my Samsung captivate.
ManOnTheMoon said:
Focus and you will get it.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
funny, guess you don't know either. :good:
recovery
kenlester said:
funny, guess you don't know either. :good:
Click to expand...
Click to collapse
press and hold power + volume down
once you get the LG logo let go and hold it again quickly.
once done follow the wipe process and you will get into recovery
Whoops, posted in wrong thread.
blkghost22 said:
press and hold power + volume down
once you get the LG logo let go and hold it again quickly.
once done follow the wipe process and you will get into recovery
Click to expand...
Click to collapse
Thanks 10x
AndroidUser00110001 said:
Never mind...check 2nd post for link
Click to expand...
Click to collapse
Tmobile :fingers-crossed:
kenlester said:
im having issues rebooting in to recovery. cant find the right combo
Click to expand...
Click to collapse
Hold power button and volume down then when you see LG Logo release buttons and press again. Once you get into factory reset screen tap power button until you get into recovery. It will not reset...just bring you into recovery
Sent from my LG-D800 using XDA Premium 4 mobile app
no go for me
installed the rom and gaaps with no issue... but playstore keeps crashing on me and i cant save my apn.
bodom_hc said:
Tmobile :fingers-crossed:
Click to expand...
Click to collapse
:Eyes-crossed:
Sent from my LG-D801 using XDA Premium 4 mobile app
blkghost22 said:
installed the rom and gaaps with no issue... but playstore keeps crashing on me and i cant save my apn.
Click to expand...
Click to collapse
Why do you even need to edit your APN? I installed the ROM and it booted and connected to LTE network right away.
nvm... the begining i idnt have any service. re wiped and re flashed... now i do
Sent from my LG-D802 using xda app-developers app
Related
first things first. I'm a noob. HAHA. but i'm willing to learn.
I recently rooted my phone by using chainfire's CF-AUTO-ROOT and it has stock recovery on it. Now, I want to install a custom recovery, specifically cwm recovery. How will be able to do this? Do I have to unroot then root again? a step by step info will be appreciated. thanks
First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app
Use the search function, read, profit.
Sent high from my SGH-M919
reply
vehvariya said:
First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
done finding cwm file that's compatible with my tab
Flashing? not really that well with android terms yet. after clicking "pda" then selecting the cwm file, should I click start? is that what you meant by flashing?
I appreciate your help.
Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app
Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app
reply
vehvariya said:
Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Got that! followed exactly what you said and poof - custom recovery. may i ask if you installed a custom rom in your tab 2? and if so, what rom is it?
reply
mymeatb18 said:
Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?
My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app
rom?
vehvariya said:
My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I also would like to install cm 10.2. is it stable? I tried searching and I found pac rom and if i'm not mistaken 3 custom roms are installed into 1 rom.
I also would like to ask if it is really necessary to wipe all data before installing a new rom? and if so, would apps like titanium backup pro would be able to backup every single app or information that is in my tab/
Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app
i use cm10.1.3rc2, it's good!
just release at 2013-9-5
cm10.1
impliu said:
i use cm10.1.3rc2, it's good!
just release at 2013-9-5
Click to expand...
Click to collapse
I would like to give that a try. do you have any links on where I can find instructions on how to install that? also links on the files that are needed. thanks.
cm10.2
vehvariya said:
Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
can you post a link on how to install cm10.2 along with the files that are needed to be downloaded. thanks.
Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app
superSUnoob said:
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?
Click to expand...
Click to collapse
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.
ROMaholic
king200 said:
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.
Click to expand...
Click to collapse
just noticed that my thread is changing direction
I would like to give that "sicked based ROM" a try. any links to those ROMs? and if im not contented, I can revert back to stock rom right? or can I try the "sicked based ROM" and stock ROM thru dual booting?
reply
vehvariya said:
Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
thanks for this info. I will try this before I try the "sicked based ROM" (evil laugh) :laugh:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
To take a screen shot, just slide left
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Samsung Exhilarate - SGH-I577 (i577)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Thanks @Somcom3X and @Unjustified Dev
Thanks phil
Sent from my SAMSUNG-SGH-T769 using Tapatalk 4
Man your awesome touch cwm with all the goodies from twrp thanks for doing this for us
sent through the worm hole from a galaxy far far away!!!!
Hey Phil, Any way to update this for 4.4? I see the t769 guys have an updated one ..Just wanted to check..Thanks man..:fingers-crossed:
InkSlinger420 said:
Hey Phil, Any way to update this for 4.4? I see the t769 guys have an updated one ..Just wanted to check..Thanks man..:fingers-crossed:
Click to expand...
Click to collapse
I found on git a cm11 device tree
However, if you do not have any kitkat rom, it could be the updates brings you more headache than advantages
Phil3759 said:
I found on git a cm11 device tree
However, if you do not have any kitkat rom, it could be the updates brings you more headache than advantages
Click to expand...
Click to collapse
We have a few...there is a official cm nightly and I have a slimrom I update regularly...I was just curious if ya wanted to put one out..its up to you..
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
InkSlinger420 said:
We have a few...there is a official cm nightly and I have a slimrom I update regularly...I was just curious if ya wanted to put one out..its up to you..
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
Click to expand...
Click to collapse
Any link to your cm11 nightly thread?
Or better, the github with cm11 device tree. Officially, your phone is still on cm-10.2
Phil3759 said:
Any link to your cm11 nightly thread?
Or better, the github with cm11 device tree. Officially, your phone is still on cm-10.2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2521335
And the device name has changed to exhilarate from i577 with CM
http://download.cyanogenmod.org/?device=exhilarate
Github
https://github.com/CyanogenMod/android_device_samsung_exhilarate/tree/cm-11.0
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
InkSlinger420 said:
http://forum.xda-developers.com/showthread.php?t=2521335
And the device name has changed to exhilarate from i577 with CM
http://download.cyanogenmod.org/?device=exhilarate
Github
https://github.com/CyanogenMod/android_device_samsung_exhilarate/tree/cm-11.0
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
Click to expand...
Click to collapse
Ah, they renamed it from i577, that's why I lost it
I will add it
Updated to kitkat build version 6.08.8
Man Phil you rock my man
Sent from my SAMSUNG-SGH-I577 using XDA Premium HD app
Thanks Phil..its REALLY appreciated..I love your shtuff..
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
Thanks for the 1-30 build man..Keeping us updated..Appreciated..
The goo.im download fails.
Have to wait to download (which is fine), then, after the wait, gets stuck on connecting to:
http://108.166.171.35/goodata/devs/...ar.md5?st=3_yPggrbRDK5XplLDAxzXA&e=1399948802
Wazzup?
cwwilson721 said:
The goo.im download fails.
Have to wait to download (which is fine), then, after the wait, gets stuck on connecting to:
http://108.166.171.35/goodata/devs/...ar.md5?st=3_yPggrbRDK5XplLDAxzXA&e=1399948802
Wazzup?
Click to expand...
Click to collapse
Goo.Im is probably down
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Can I still restore backup after 'MD5 mismatch'?
I recently got a new i577 that came with Android v4.0.4 loaded. I installed 'Philz 6' and did a backup before trying a couple custom ROMs. I just went to restore my backup and it failed, showing 'MD5 mismatch'. I'm wondering if my backup is now useless/lost. Any way I can fix this and get my v4.0.4 back?
Any thoughts or help? THANK YOU!
Somewhere on this site is a zip file of stock ice cream sandwich. Just do some searching and you'll find it And if you want the stock recovery image that's on here to
Found a stock ROM for 4.0.4 and loaded it. Works fine BUT, I still have to reload all my stuff from scratch. A real PITA. Why did the RESTORE fail. Doesn't make me trust 'Philz' very much. Looks like I'll have to find another backup tool and ONLY use Philz for loading ROMs. Maybe Ill switch over to TWRP if it does reliable backups.
@mem5449
There is a fairly recent TWRP for the Exhilarate out here somewhere on XDA. I'll try to find the link.
after rom update i am stuck at bootscreen. i can get into twrp recoery but i have no backup. win 7 will not see phon. please please help
What ROM update?
Sent from my Nexus 5 using Tapatalk
Did you do a clean install, wipe data?
Sent from my Nexus 5 using XDA Free mobile app
help
carbon rom. i did all above mentioned. no OS on phone
Georgiazen said:
carbon rom. i did all above mentioned. no OS on phone
Click to expand...
Click to collapse
No, os. So you wiped the entire device? You'll have to use adb to put a rom on or side load it.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, os. So you wiped the entire device? You'll have to use adb to put a rom on or side load it.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
how do i side load it. my data is intact just no OS
Georgiazen said:
how do i side load it. my data is intact just no OS
Click to expand...
Click to collapse
See rootSU's signature above. He has fine guides linked there. But how do you know you have no os if your data is intact? Do you have a rom zip on your device you can flash in twrp? I assume you don't have a nandroid or you would have tried that already.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
See rootSU's signature above. He has fine guides linked there. But how do you know you have no os if your data is intact? Do you have a rom zip on your device you can flash in twrp? I assume you don't have a nandroid or you would have tried that already.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
i know because it tells me i dont. i can see my data in the twrp file manager.if i had a rom zip installed i wouldnt have posted this topic. thanks for your help
So then download a ROM and push it to your phone so you can then flash it via recovery.
Please try to keep your help requests limited to 1 thread. When you start cross posting , things can get messy
Sent from my Nexus 5 using Tapatalk
I would like to be able to go back to cm 11s but can't find any downloads
Sent from my One using XDA Premium 4 mobile app
I'm runng PA 4.44 now
Sent from my One using XDA Premium 4 mobile app
MiPaDo said:
I'm runng PA 4.44 now
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm pretty sure I've seen builds of the latest CM11S that you can download and flash, but I'm not sure if they support custom recoveries. Also, I think in the Toolkit for the OnePlus One there is an option to flash CM11S. I do not know how it will affect your device if you do it that way, but maybe consider that as an option.
flash http://forum.xda-developers.com/oneplus-one/general/rom-xnph25r-cm11s-zip-t2820008 in twrp
dont forget to wipe.
zephiK said:
flash http://forum.xda-developers.com/oneplus-one/general/rom-xnph25r-cm11s-zip-t2820008 in twrp
dont forget to wipe.
Click to expand...
Click to collapse
Funny thing about this is I flashed it last night in TWRP and it would fail everytime I wiped first.
I saw someone else with the same issue and they dirty flashed it and it worked. I ended up trying to dirty flash it over (Not sure which ROM, I've tried them all) and it flashed fine. As soon as it booted I had some FC so I went back into TWRP and wiped and all has been fine.
[Q&A] [ROM] XenonHD-5.0.2 Beta 5 (26.01.15) *Truly Stable, Fast & Buttery Smooth*
Q&A for [ROM] XenonHD-5.0.2 Beta 5 (26.01.15) *Truly Stable, Fast & Buttery Smooth*
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] XenonHD-5.0.2 Beta 5 (26.01.15) *Truly Stable, Fast & Buttery Smooth*. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Battery life confirm please
How about battery life of this ROM..
Compare to cm11s is it any significant change.
kbalthom said:
How about battery life of this ROM..
Compare to cm11s is it any significant change.
Click to expand...
Click to collapse
It's a little better, but you will find the real improvement in performance and battery life by flashing a custom kernel.
Sent from my A001 using XDA Free mobile app
I am getting a "error executing updater binary" message when I try to flash the rom. Any fix?
bill1clinton said:
I am getting a "error executing updater binary" message when I try to flash the rom. Any fix?
Click to expand...
Click to collapse
Me too :/ I'm now trying to sideload it but I don't think it will change something...
What recovery are you using?
Sent from my A001 using XDA Free mobile app
pcarenza said:
What recovery are you using?
Sent from my A001 using XDA Free mobile app
Click to expand...
Click to collapse
TWRP v2.8.4.1 for me
p.s. sideload failed....it is a problem with the zip I think...
WhiteWashed said:
TWRP v2.8.4.1 for me
p.s. sideload failed....it is a problem with the zip I think...
Click to expand...
Click to collapse
Try downloading it to your device and using install, not sideload.
Also, others have successfully flashed the zip - see the comments in the main thread. I'll check it out myself.
I am using the unofficial TWRP 2.8.4.1. Would it be because I am still on CM11 and need to flash the CM12 firmware update first?
pcarenza said:
Try downloading it to your device and using install, not sideload.
Also, others have successfully flashed the zip - see the comments in the main thread. I'll check it out myself.
Click to expand...
Click to collapse
Error still persists "error executing updater binary in zip 'sdcard/update-XenonHD-02-09-15-signed-bacon.zip'
I don't know what is causing this...I can flash other ROMs just fine.
I'm coming from stock rooted cm11s xnph05q, maybe I should flash CM12 ROM first ?
WhiteWashed said:
Error still persists "error executing updater binary in zip 'sdcard/update-XenonHD-02-09-15-signed-bacon.zip'
I don't know what is causing this...I can flash other ROMs just fine.
Click to expand...
Click to collapse
Then there's something wrong with the download possibly? Check the MD5SUM.
I just flashed a new build. I'll upload this one so you can try again with a fresh build.
pcarenza said:
Then there's something wrong with the download possibly? Check the MD5SUM.
I just flashed a new build. I'll upload this one so you can try again with a fresh build.
Click to expand...
Click to collapse
The download is OK...I'll wait the new fresh build Thank you.
EDIT: SOLVED ! I've just flashed a CM12 nightly ROM and then re-flash again the XenonHD and everything worked just fine.
WhiteWashed said:
The download is OK...I'll wait the new fresh build Thank you.
EDIT: SOLVED ! I've just flashed a CM12 nightly ROM and then re-flash again the XenonHD and everything worked just fine.
Click to expand...
Click to collapse
I updated the 5.1 link so you can try again.
bill1clinton said:
I am using the unofficial TWRP 2.8.4.1. Would it be because I am still on CM11 and need to flash the CM12 firmware update first?
Click to expand...
Click to collapse
It worked when I flashed the bacon firmware update before I flash the rom.
Reporting back:
Your ROM is exactly what I was looking for. However, it looks like it suffers the same issues with micro-lag/stutter like the other Lollipop ROMs. Below are the steps that I took.
- full wipe
- firmware update
- rom flash
- gapp flash
- supersu flash
XenonHD
Hello I recently flash XenonHD into my OnePlus but it appears to be stuck on the XenonHD boot animation. Any suggestions? This is comming from a fresh Lilipop CM 12 nightly with 5.0 gaps.
royalmonky said:
Hello I recently flash XenonHD into my OnePlus but it appears to be stuck on the XenonHD boot animation. Any suggestions? This is comming from a fresh Lilipop CM 12 nightly with 5.0 gaps.
Click to expand...
Click to collapse
Full wipe? What build date was the CM12?
Sent from my A001 using XDA Premium 4 mobile app
Setting.Out said:
Full wipe? What build date was the CM12?
Sent from my A001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes well im kind of new so I just pressed "Factory reset" on TWRP also it was the newest nightly 14/02/15
royalmonky said:
Yes well im kind of new so I just pressed "Factory reset" on TWRP also it was the newest nightly 14/02/15
Click to expand...
Click to collapse
Manually wipe (dalvik/cache/system/data) DON'T select SD storage.. Reflash rom/gapps and reboot.. It does take a bit longer to boot than some ROMs but less than 5 minutes..
Sent from my A001 using XDA Premium 4 mobile app
First boot does take several minutes to optimize.
Sent from my A001 using XDA Free mobile app