Wanted: a Working CnM touchpad 9.7SC firmware image - Miscellaneous Android Development

I have tried to install CM10 on my CnM touchpad 9.7 SC and something went wrong, My tablet features the allwinner X10 chip and I tought that I could give it a try installing CM10 to get most out of the device.
Now I have flashed the firmware on the Cnm website, the firmware turns out to be not working right, I get a messed up booting creen and when boots up it's just a black/grey and white messed up screen.
I am now looking for a working firmware image for my CnM touchpad, if any of you guys has one please upload it for me

Related

HELP ME PLEASE ( TOUCH SCREEN PROBLEM ) flash issue

hi i have an allwinner tab similar hardware to ainol novo 7 advanced
i flashed few firmwares on it of different tabs( ployer momo 9 , ly f1) and they were working good
except novo 7 advanced firmwares ( touch was not working at all )
then i flashed a different firmware(onda v140) on it and the screen went white when powered on .
then again i flashed my default firmware everything is working now but touch screen is responding very differently . this is a capacitive touch . i have even tried flashing those firmwares which were working perfectly before but now the problem is common in all firmwares i flash .
see the video
http://www.youtube.com/watch?v=T1IZqA-verU
then after that i tried flashing onda firmwares for 7 inch tablet that has auto recalibration of screen function after flash.
the touch points changed from previous one.
now my question is since this is a software/drivers issue how can i get it back
is my tablet bricked ? any chance f bringing it back to life.
rest everything is working fine including camera. and i am able to use adb on pc and run commands easily ..
please help anyone
please please please !!
thanks
the firmware that i flashed accidentally was for 9.7 inch tablet and after that the controls changed .
does any one has a solution
same thing happened with another guy .
http://www.pandawillforum.com/showthread.php?7918-momo9-touck-problem-please-help-me!!
same problem . please somebody help
have you tried to shutting it down by holding power button for a long time (it will skip the do you want to shutdown option) and turn it back on again?
i had a trouble once with mine. a lot of resets (the small hole button) and reflashing ICS did not help. but strangely when i shut it down normally like that, it came back normal
edited: sorry if it doesnt work, my problem came suddenly, not because of changing firmware.
Don !
I Know how to make you solve your prob ! Just flash momo9 compatibility 1.2.0.zip:good:

bricked onda vi40 ultimate

Hi all
I hope someone can help I think I may have bricked my onda vi40 ultimate tablet I was running ics 4.04 latest update from onda
I did try to flash CyanogenMod 9 and I managed to get it installed however now my tablet is dead (i wont power up the screens black)
I think it’s in recovery mode as ive tried to re-flash with live suit back to ver 4.04 however it gets stuck on 3% and wont go any further
Any ideas????
i followed this guide Unofficial CyanogenMod 9 for many AllWinner A10

[Q] How to resurrect tablet pc after wrong update.zip installed?

Hi, I have tablet pc with Telechip 8923. I tried to change resolution with LCD resolution app, and after reboot it doesn't start. Stuck on ANDROID booting last page. I didn't have firmware, and I tried to install update.zip from freelander tablet, and then after reboot it was worse. Only 1s shows android screen and goes black. I talked to manufacturers and they sent me my tablet update.zip but its doesn't helped. Nothing changed. first screen and after 1 second goes black.
What to do? need full erase and then install update.zip? if there is way like this. Or need drivers and firmware from computer? to install via USB? I know It's my big mistake.
I have only update.zip
Tablet is with DVB - T, GPS, 1,2Ghz cortex A5 dual.
Tablet called a777
operating system is 4.0.3
new question then. what it's in update.zip? exiting rom update files? not new full rom?
hey! need info!! Can I broke tablet with wrong update.zip ?? maybe other was wrong too? if I'll have gut update.zip for my tablet, it can rewrite new good firmware?

[Q] Allview speed 2 quad (onda v812 rebranded)

Heloo all,
I have a serious problem with my allview speed 2 quad tablet.After a restart my tablet always opened in recovery mode but in that menu i couldn't move down or up because the touchscreen seems that it doesn't answer to touch.I try different software and flash them with PhoenixSuit but until now i didn't find the right one.I try a original firmware(Allview2_M809Q5_20130903) from a thread around here but after i flash it the tablet open in the menu but the touch doesn't respond to command.
I tryed all version of Onda v812 software:
-V812Core4_v1.35
-V812Core4-V1_v2.0
-V812Core4-V5_v2.0
-V812Core4-V5_v1.35,but in all those version the camera and the wifi motherboard isn t recognized by the Onda software so i can't use camera and WIFI.
Anyone can help me with a original software for this tablet or a modify image firmware that works on this tablet?

Need ROM vor Allwinder A20 Tablet

Hi gays sorry if I post in wrong section.
I have a tablet Tpad model number CT701.C2. And its only hang on Allwinner logo, not boot os.
I found on the offical page the firmware but for CT90.C2, because the link for CT701.C2 doesnt work.
And i download a "PhoenixSuit_EN" tool for upgrade image file, and do it.
Now tablet boot the system ok, but my Touch screan doesnt react any more. And i think the problem is in firmware image file.
So i luking on the internet for coresponding file for my tablet.
Procesor is Allwinner A20, and a motherboard number is "um723 -v2.1"
Can anyone please tell me what to do, or find me a firmware for my tablet that works, and touch screan works.

Categories

Resources