hi i have an allwinner tab similar hardware to ainol novo 7 advanced
i flashed few firmwares on it of different tabs( ployer momo 9 , ly f1) and they were working good
except novo 7 advanced firmwares ( touch was not working at all )
then i flashed a different firmware(onda v140) on it and the screen went white when powered on .
then again i flashed my default firmware everything is working now but touch screen is responding very differently . this is a capacitive touch . i have even tried flashing those firmwares which were working perfectly before but now the problem is common in all firmwares i flash .
see the video
http://www.youtube.com/watch?v=T1IZqA-verU
then after that i tried flashing onda firmwares for 7 inch tablet that has auto recalibration of screen function after flash.
the touch points changed from previous one.
now my question is since this is a software/drivers issue how can i get it back
is my tablet bricked ? any chance f bringing it back to life.
rest everything is working fine including camera. and i am able to use adb on pc and run commands easily ..
please help anyone
please please please !!
thanks
the firmware that i flashed accidentally was for 9.7 inch tablet and after that the controls changed .
does any one has a solution
same thing happened with another guy .
http://www.pandawillforum.com/showthread.php?7918-momo9-touck-problem-please-help-me!!
same problem . please somebody help
have you tried to shutting it down by holding power button for a long time (it will skip the do you want to shutdown option) and turn it back on again?
i had a trouble once with mine. a lot of resets (the small hole button) and reflashing ICS did not help. but strangely when i shut it down normally like that, it came back normal
edited: sorry if it doesnt work, my problem came suddenly, not because of changing firmware.
Don !
I Know how to make you solve your prob ! Just flash momo9 compatibility 1.2.0.zip:good:
i need firmware for 7inch Irulu 5 capactive Allwinner A13
tablet details this link
7" Google Android 4.0 OS Capacitive Tablet Computer PC 4GB 512MB A13 3D Games | eBay
i 'm realy need the firmware , the tablet is not working with the current rom firmware .
tarekfathey said:
i need firmware for 7inch Irulu 5 capactive Allwinner A13
tablet details this link
7" Google Android 4.0 OS Capacitive Tablet Computer PC 4GB 512MB A13 3D Games | eBay
i 'm realy need the firmware , the tablet is not working with the current rom firmware .
Click to expand...
Click to collapse
Are you still looking? I may be able to help?
bruce7890 said:
Are you still looking? I may be able to help?
Click to expand...
Click to collapse
ill be happy if u can help me 2
final86 said:
ill be happy if u can help me 2
Click to expand...
Click to collapse
Do you want me to upload a copy of the ROM img file I've got? I guess you didn't get one with your machine?
bruce7890 said:
Do you want me to upload a copy of the ROM img file I've got? I guess you didn't get one with your machine?[/QUOTE
yes please if u can but i have a problem which is i tried the cm10 room because i didn't find the original one for mine then now the touch screen not working and i can get to flash anything also my usb showing problem with the driver before i flash the new room and even after is there a way to get to the recovery menu throw the volume and power since its the only 2 things working now ?
Click to expand...
Click to collapse
Try this - http://www.4shared.com/file/1OgAvwRc/System_software.html
ok thank you
any idea how i can get to the recovery mode becuse i cant use my tuch screen to work even my usb not showing on my pc ?
final86 said:
ok thank you
any idea how i can get to the recovery mode becuse i cant use my tuch screen to work even my usb not showing on my pc ?
Click to expand...
Click to collapse
You need to use LiveSuit to flash the image via USB from your computer. These links should get you started in terms of where to download from and how to do this.
yes , i still need help , please upload the rom if you have .
yes , i still need help , please upload the rom if you have .
thank you .
tarekfathey said:
yes , i still need help , please upload the rom if you have .
thank you .
Click to expand...
Click to collapse
http://www.4shared.com/file/1OgAvwRc/System_software.html
irulu aj0008 A13 system recovery image needed
Hello all,
I purchased an irulu 7 inch tablet off ebay a few months ago, with the model number AJ008 with these specs:
CPU Processor: Allwinner A13 1.2 GHZ +GPU Mali 400 MP
Operating System: Google Android 4.0.3 ICE Cream Sandwich
Size: 7" TFT LCD(16:9 Screen) Capacitive Tablet PC TFT LCD
Resolution: 800*480 Pixel, support G-Sensor
Touch Screen: Full Size,High Sensitive 5 Point Capacitive Touch Screen
RAM: 512MB DDR3
Capacity: 4GB;Expandable by MicroSD to 32GB
Camera: Built-in 0.3MP Camera
Output Device: Built-in Loud Speaker
Input Device: Built-in Microphone
LAN: Wifi + 3G
Wireless: Built-in 802.11b/g WLAN Card; Support 3G dongle
I've searched now since the end of May to find the right system recovery image for this, to no avail. One previous post on here has a system recovery image that came close to what mine was (in terms of the boot animations and that's it) but nothing I've tried seems to work. I've visited numerous sites, and flashed different images that I've found listed by another site, only to get a partial touch screen, no touch screen at all, the front camera to work (but most images this isn't the case), and have yet to find one that has the wifi working. I'm hoping someone here can point me in the right direction to figure out this bloody thing before I find myself snapping it in half in frustration.
bruce7890 said:
http://www.4shared.com/file/1OgAvwRc/System_software.html
Click to expand...
Click to collapse
My friend has this tablet, I believe.
It wouldn't boot. I flashed this image, but no touchscreen.
Any suggestions?
hello I need allwinner A13 Q88 7 inch firmware
plz help
redheadplantguy said:
My friend has this tablet, I believe.
It wouldn't boot. I flashed this image, but no touchscreen.
Any suggestions?
Click to expand...
Click to collapse
My friend here's the patch for your tablet. But at this time will not let me post the link.
Irulu
I think i might be late here..and probably no one will see this but i have to try... I have the IRULU AK351 tablet...the last owner which was the father of my friend put a numeric password in it..and when we asked him he didn't know the password, does it has a solution? i tried the classic software reset with the power button and the volume buttons but none of them worked...¿what can i do? should i ask for the .IMG of this tablet?
thanks for your kindness stranger.
need firmware tablet TRUSTMATE A13 - DA020CA
help plz
where can I download firmware for iRulu U1 pro phone?
hello
I have a CMX Aquila 097-1016 tablet from Austria -> AMLogic aml8726-m6 ( AMLogic aml8726-mx = the same i think )
I flashed a Onda v801 V8 Rom because the Stock rom has many problems, apps crash(shut down) all the time etc..
Now it Boots Normaly but the Colors of the display are not proper and the touchscreen doesnt work right
now a new problem accured i cant enter the recovery mode(e3) anymore and the aml usb burning tool doesnt work either
Can someone help me, does anyone know how to fix these probs?
bump
Hi gays sorry if I post in wrong section.
I have a tablet Tpad model number CT701.C2. And its only hang on Allwinner logo, not boot os.
I found on the offical page the firmware but for CT90.C2, because the link for CT701.C2 doesnt work.
And i download a "PhoenixSuit_EN" tool for upgrade image file, and do it.
Now tablet boot the system ok, but my Touch screan doesnt react any more. And i think the problem is in firmware image file.
So i luking on the internet for coresponding file for my tablet.
Procesor is Allwinner A20, and a motherboard number is "um723 -v2.1"
Can anyone please tell me what to do, or find me a firmware for my tablet that works, and touch screan works.
My toshiba AT7-a tab is bricked. I tried to flash it with a custom rom. (But the ROM was not for the model) I used "RKBatchtool" and "AndroidTools" for for the task. Now my tab is not booting or nothing on display. When I plug the tab in to my PC
Android tools show "One Loader device found" - in recovery mode (Vol+ and Power on)
"One mask device found" in Power on mode (Power on)
I think it is possible to upload a new ROM with "AndroidTools" to the device.
Device Detail:
Toshiba AT7-a
It came with Android 4.2.2 Jelly Bean operating system.
RK3188 1.6GHz processor with ARM Mali-400 GPU
7 inch display with 1,024 x 600 pixels of screen resolution
Please anyone can help me?
Does anyone have Toshiba AT7-a original or custom Rom?
or any other ways to fix my tab?
PLEASE Help me!!!
Hi !
Please use the google search function with this keyword - toshiba at7-a firmware - and do not post same question on more threads that actually are not related to your problem
https://forum.xda-developers.com/ch...ba-at7-rom-t3553861/post70961231#post70961231
https://forum.xda-developers.com/ex...ba-at7-rom-t3555010/post70990980#post70990980
Cheers !