[Completed] Need a Toshiba AT7-a ROM - XDA Assist

My toshiba AT7-a tab is bricked. I tried to flash it with a custom rom. (But the ROM was not for the model) I used "RKBatchtool" and "AndroidTools" for for the task. Now my tab is not booting or nothing on display. When I plug the tab in to my PC
Android tools show "One Loader device found" - in recovery mode (Vol+ and Power on)
"One mask device found" in Power on mode (Power on)
I think it is possible to upload a new ROM with "AndroidTools" to the device.
Device Detail:
Toshiba AT7-a
It came with Android 4.2.2 Jelly Bean operating system.
RK3188 1.6GHz processor with ARM Mali-400 GPU
7 inch display with 1,024 x 600 pixels of screen resolution
Please anyone can help me?
Does anyone have Toshiba AT7-a original or custom Rom?
or any other ways to fix my tab?
PLEASE Help me!!!

Hi !
Please use the google search function with this keyword - toshiba at7-a firmware - and do not post same question on more threads that actually are not related to your problem
https://forum.xda-developers.com/ch...ba-at7-rom-t3553861/post70961231#post70961231
https://forum.xda-developers.com/ex...ba-at7-rom-t3555010/post70990980#post70990980
Cheers !

Related

Please! Help with my bricked tablet PC SZENIO 2000

Hello friends
I'm here because to find someone to help me in my problem.
I have a tablet that does not care. It freezes at startup and does nothing else. I've tried everything to bring to life, but without success. I've used many firmwares forum but no work and I'm desperate. I have tried the firware intalar root using "LiveSuit v1.09" but firware images that I have used have not had success.
The only way I can connect my USB tablet is by doing it to be recognized on my computer and make flash software.
Please help me, I really need my tablet back. If I find a valid firware.img think it will work again
My tablet is the following model:
SZENIO PC 2000
hardware
• CPU Allwiner A10, Cortex A8, 1.2 Ghz
• 1 GB Ram DDRIII
• Operating system Android 4.0
• 8GB Internal Memory
screen
• TFT capacitive touch Multicontact
• 10.1 "inches the color (1024x600 pixels)
Thanks guys and sorry for my english, but I'm from another country and not speak very well this language
Thanks
Szenio Problem
Hello Fyreman.
I hope that you can solve my problem. I'm afraid because I have the same problem but I can't solve it by anyway. I have been installed the Livesuite 1.09 in my PC and have tried to install the Woxter firmware. My tablet not answer... not appears anythig in the screen, and I don't know what I have to do. I have the same model...
Please, If you have any solution answer me.
Thanks for all in advance.
PS: I want to apologize for my English.
PS2: Thanks again

i need firmware for 7inch Irulu 5 capactive Allwinner A13

i need firmware for 7inch Irulu 5 capactive Allwinner A13
tablet details this link
7" Google Android 4.0 OS Capacitive Tablet Computer PC 4GB 512MB A13 3D Games | eBay
i 'm realy need the firmware , the tablet is not working with the current rom firmware .
tarekfathey said:
i need firmware for 7inch Irulu 5 capactive Allwinner A13
tablet details this link
7" Google Android 4.0 OS Capacitive Tablet Computer PC 4GB 512MB A13 3D Games | eBay
i 'm realy need the firmware , the tablet is not working with the current rom firmware .
Click to expand...
Click to collapse
Are you still looking? I may be able to help?
bruce7890 said:
Are you still looking? I may be able to help?
Click to expand...
Click to collapse
ill be happy if u can help me 2
final86 said:
ill be happy if u can help me 2
Click to expand...
Click to collapse
Do you want me to upload a copy of the ROM img file I've got? I guess you didn't get one with your machine?
bruce7890 said:
Do you want me to upload a copy of the ROM img file I've got? I guess you didn't get one with your machine?[/QUOTE
yes please if u can but i have a problem which is i tried the cm10 room because i didn't find the original one for mine then now the touch screen not working and i can get to flash anything also my usb showing problem with the driver before i flash the new room and even after is there a way to get to the recovery menu throw the volume and power since its the only 2 things working now ?
Click to expand...
Click to collapse
Try this - http://www.4shared.com/file/1OgAvwRc/System_software.html
ok thank you
any idea how i can get to the recovery mode becuse i cant use my tuch screen to work even my usb not showing on my pc ?
final86 said:
ok thank you
any idea how i can get to the recovery mode becuse i cant use my tuch screen to work even my usb not showing on my pc ?
Click to expand...
Click to collapse
You need to use LiveSuit to flash the image via USB from your computer. These links should get you started in terms of where to download from and how to do this.
yes , i still need help , please upload the rom if you have .
yes , i still need help , please upload the rom if you have .
thank you .
tarekfathey said:
yes , i still need help , please upload the rom if you have .
thank you .
Click to expand...
Click to collapse
http://www.4shared.com/file/1OgAvwRc/System_software.html
irulu aj0008 A13 system recovery image needed
Hello all,
I purchased an irulu 7 inch tablet off ebay a few months ago, with the model number AJ008 with these specs:
CPU Processor: Allwinner A13 1.2 GHZ +GPU Mali 400 MP
Operating System: Google Android 4.0.3 ICE Cream Sandwich
Size: 7" TFT LCD(16:9 Screen) Capacitive Tablet PC TFT LCD
Resolution: 800*480 Pixel, support G-Sensor
Touch Screen: Full Size,High Sensitive 5 Point Capacitive Touch Screen
RAM: 512MB DDR3
Capacity: 4GB;Expandable by MicroSD to 32GB
Camera: Built-in 0.3MP Camera
Output Device: Built-in Loud Speaker
Input Device: Built-in Microphone
LAN: Wifi + 3G
Wireless: Built-in 802.11b/g WLAN Card; Support 3G dongle
I've searched now since the end of May to find the right system recovery image for this, to no avail. One previous post on here has a system recovery image that came close to what mine was (in terms of the boot animations and that's it) but nothing I've tried seems to work. I've visited numerous sites, and flashed different images that I've found listed by another site, only to get a partial touch screen, no touch screen at all, the front camera to work (but most images this isn't the case), and have yet to find one that has the wifi working. I'm hoping someone here can point me in the right direction to figure out this bloody thing before I find myself snapping it in half in frustration.
bruce7890 said:
http://www.4shared.com/file/1OgAvwRc/System_software.html
Click to expand...
Click to collapse
My friend has this tablet, I believe.
It wouldn't boot. I flashed this image, but no touchscreen.
Any suggestions?
hello I need allwinner A13 Q88 7 inch firmware
plz help
redheadplantguy said:
My friend has this tablet, I believe.
It wouldn't boot. I flashed this image, but no touchscreen.
Any suggestions?
Click to expand...
Click to collapse
My friend here's the patch for your tablet. But at this time will not let me post the link.
Irulu
I think i might be late here..and probably no one will see this but i have to try... I have the IRULU AK351 tablet...the last owner which was the father of my friend put a numeric password in it..and when we asked him he didn't know the password, does it has a solution? i tried the classic software reset with the power button and the volume buttons but none of them worked...¿what can i do? should i ask for the .IMG of this tablet?
thanks for your kindness stranger.
need firmware tablet TRUSTMATE A13 - DA020CA
help plz
where can I download firmware for iRulu U1 pro phone?

[Q] Help unbrick AMLogic aml8726-mx tablet

hello
I have a CMX Aquila 097-1016 tablet from Austria -> AMLogic aml8726-m6 ( AMLogic aml8726-mx = the same i think )
I flashed a Onda v801 V8 Rom because the Stock rom has many problems, apps crash(shut down) all the time etc..
Now it Boots Normaly but the Colors of the display are not proper and the touchscreen doesnt work right
now a new problem accured i cant enter the recovery mode(e3) anymore and the aml usb burning tool doesnt work either
Can someone help me, does anyone know how to fix these probs?
bump

[Q] Trekstor xintron i7

I have a problem with my Trekstor xintron i7 (ST70408-4 coho). After the last update from Android 5.0 to 5.1 the device is broken. If I switch the xintron on, the boot logos are shown, then I see shortly the Android main screen, then the screen is black but the backlight is still on. The only way to shutdown the device is to press the on/off button 20 sec.
I find the way to the recovery mode and wipe the caches. The result is the same error. In the recovery mode is an option to 'update' the device via ADB.
And here are my problems
I don't know how I can use that (software, drivers etc for ADB)
and
I didn't found a ROM file.
Trekstore said that they didn't have a ROM File. I didn't found a file in the web. One thing I know is, the xintron i7 is the reference board of Intel. So I think if I can get that ROM File I will have a chance to recover the tablet.
So is here someone who can help me.
I'm as you... if you know anything, can you help me too??
I have backuped the stock images of the Xintron i 7.0.
xintron_i_7.0_coho_LMY47Z_L13101355_5.1.1_lollipop.zip (746.2 MB)
mega.nz/#!3pInSRjT!DOe7m8LKyA7Y5s2WWi0ynSzh6jdSmTvTwye239kMY2M (copy link to a new tab. not linked due to ridiculous rules).
I did also create a routing tutorial in the German Forum "android-hilfe.de". Check it out if you are interested or ask me questions here if you have any problems.
Hello,
nice post in the german forum.
I have a quesiton, which maybe to experts could look like ridicolous but... here it is:
I have a tablet Trekstor Surftab Wintron 7.0 which standing at the manufacturer specs it is basically the same device of the Trekstor Xintron i 7.0;
The question is: could be possible to mount the Android stock images you posted on the Wintron 7.0? (and vice versa?)
Stock-Rom for trekstor surftab xintron 7 st70408_4
Hello, I am searching for Stock-Rom for trekstor surftab xintron 7 st70408_4 till Android v5.1 or Rom with Android v4.4 or v5.0. Could somebody please help me?

[Q] Allview speed 2 quad (onda v812 rebranded)

Heloo all,
I have a serious problem with my allview speed 2 quad tablet.After a restart my tablet always opened in recovery mode but in that menu i couldn't move down or up because the touchscreen seems that it doesn't answer to touch.I try different software and flash them with PhoenixSuit but until now i didn't find the right one.I try a original firmware(Allview2_M809Q5_20130903) from a thread around here but after i flash it the tablet open in the menu but the touch doesn't respond to command.
I tryed all version of Onda v812 software:
-V812Core4_v1.35
-V812Core4-V1_v2.0
-V812Core4-V5_v2.0
-V812Core4-V5_v1.35,but in all those version the camera and the wifi motherboard isn t recognized by the Onda software so i can't use camera and WIFI.
Anyone can help me with a original software for this tablet or a modify image firmware that works on this tablet?

Categories

Resources