Hello friends
I'm here because to find someone to help me in my problem.
I have a tablet that does not care. It freezes at startup and does nothing else. I've tried everything to bring to life, but without success. I've used many firmwares forum but no work and I'm desperate. I have tried the firware intalar root using "LiveSuit v1.09" but firware images that I have used have not had success.
The only way I can connect my USB tablet is by doing it to be recognized on my computer and make flash software.
Please help me, I really need my tablet back. If I find a valid firware.img think it will work again
My tablet is the following model:
SZENIO PC 2000
hardware
• CPU Allwiner A10, Cortex A8, 1.2 Ghz
• 1 GB Ram DDRIII
• Operating system Android 4.0
• 8GB Internal Memory
screen
• TFT capacitive touch Multicontact
• 10.1 "inches the color (1024x600 pixels)
Thanks guys and sorry for my english, but I'm from another country and not speak very well this language
Thanks
Szenio Problem
Hello Fyreman.
I hope that you can solve my problem. I'm afraid because I have the same problem but I can't solve it by anyway. I have been installed the Livesuite 1.09 in my PC and have tried to install the Woxter firmware. My tablet not answer... not appears anythig in the screen, and I don't know what I have to do. I have the same model...
Please, If you have any solution answer me.
Thanks for all in advance.
PS: I want to apologize for my English.
PS2: Thanks again
i have a chinese tablet 9.7" with android 4.0.4. i have installed titanium backup it shows status that device is rooted but the prob is that i cant found cwm for my tablet i have tried rom manager also but no luck.
bcause tablet restart after every five to 10 min and very slow also.
here is all details plz give me link to good rom and cwm and all other which i needed.
Name.
Apex IPS pro
MOdel No.
S5
Android Version
4.0.4
Baseband version.
1.4rc3.
kernel version
3.0.8+
[email protected] #2
i have found cwm and install it through teminal emulator and install cyanogen mod 10 after enter in cwm i have wipe/factory reset and install CM10 rom and reboot but after that my chinense tablet wont show any thind just showing balck screen i tried to enter in cwm but nothing will appear i press tha power button lcd suddenly off and again black screen will appear what should i do plz help
Build No.
03F2-P1-H1-H01-AH40-20120708T
plz help
i have found cwm and install it through teminal emulator and install cyanogen mod 10 after enter in cwm i have wipe/factory reset and install CM10 rom and reboot but after that my chinense tablet wont show any thind just showing balck screen i tried to enter in cwm but nothing will appear i press tha power button lcd suddenly off and again black screen will appear what should i do plz help
thanks in advance
Do you want to wipe data?
Try it on setting in the mobile only.
Do you want to wipe dalvik-cache, then do it through rom manager.
Wiping is easy, why do u want to do it through cwm only????
Ur tab doesn't have all hardware support i feel...
It's bricked... If you want to enjoy custom ROMs and kernels, at least get a device that is supported.
display
sanjaykumar.sanjay69 said:
Do you want to wipe data?
Try it on setting in the mobile only.
Do you want to wipe dalvik-cache, then do it through rom manager.
Wiping is easy, why do u want to do it through cwm only????
Ur tab doesn't have all hardware support i feel...
Click to expand...
Click to collapse
it doesnt show display only black screen will appear after i power on or i plug in charger only bright black screen... how to wipe i cant see any thing.
plz help
Lim Wee Huat said:
It's bricked... If you want to enjoy custom ROMs and kernels, at least get a device that is supported.
Click to expand...
Click to collapse
yes you are right sir... i have sony ericsson arc s also it had a problem like this and it stuck on boot loop i found sony updator and update my phone so i want to ask that any tool that update android or to restore my orignal firmware... i have backup my rom with cwm and that is present in sdcard but how can i restore that because tablet doesnt display.
help plz
i have try live suit but it always show yellow exclamation mark when i connect the tablet and i also not find the correct firmware for my tablet .....
its not bricked sir coz i have read in many forums that allwinner a10 chipset is practically unbrickable
what should i do any onew plz help me
looks like your tablet is having Allwinner A10 BOXCHIP CPU.
Do you have the original stock .img ROM( not the cwm backup) ?
if yes then press the power button for about 10-15 secs to switch it off then connect it to PC and try to flash it with livesuit tool.
have you look on needrom.com if have the rom for you ?
nooooooooooooooo
shadab007g said:
looks like your tablet is having Allwinner A10 BOXCHIP CPU.
Do you have the original stock .img ROM( not the cwm backup) ?
if yes then press the power button for about 10-15 secs to switch it off then connect it to PC and try to flash it with livesuit tool.
Click to expand...
Click to collapse
no i dont have stock firmware thats the problem i have find on many sites but no luck manufacturer have a site but there are too many models of named S5 what to do
Souled62 said:
have you look on needrom.com if have the rom for you ?
Click to expand...
Click to collapse
there is no rom for my tab actually i dont know what shoud i type to search the correct rom for my tab i have searced cortex A8 rom and boxchip firmware etc etc, with cortex A8 rom that i have livesuit show always yellow exclamation mark
ubaidbhatti said:
no i dont have stock firmware thats the problem i have find on many sites but no luck manufacturer have a site but there are too many models of named S5 what to do
Click to expand...
Click to collapse
ok.... can you provide me the full info of your tablet?
pm me.... lets talk there.
Try a factory reset or you could simply try a root program and try un rooting it then rooting it back cause my phone was slow after root but I tried again and it worked like a charm (back up before formating)
DoNt FeEd ThE tRoLls !
(PrOhOpEr) <------ I own !
Please thank me it only takes a click or two!
i have flashed wrong rom and my tab dosent show any display then how can i factory reset when i cant see any thing
I am having the same issue, I am trying to revive a Chinese "vigo" 7 in tablet for kicks.
I get the boot screen and when I plug it into my win 7 PC I can see a drive like icon but I cant access it .
Livesuite just complains about nothing needs updating when I try that.
7" 5-Point Capacitive Touch Screen
Boxchip A10 1.2Ghz Cortex A8
Android 4.0 w 4GB Memory and 512MB RAM
Micro SD (Upto 32GB)
HDMI, Headphone Socket, Mini USB
Wireless N w Front Camera
Supports most Video and Audio formats
Li-ion battery 3000mAH
I can get it to the boot and splash screen but thats it, I can see windows is trying to load it but the drivers dont seem to be there but there is no complaint from windows either and nothing in the Device manager.
I have Livesuit here and installed but it cant see the tablet. Windows shows 2 new "drives" when I plug the tablet into my PC but I cant access them.
Any thoughts?
TIA
I have a polaroid tablet with model polaroid MID1047.
Its been barely 3 months since I purchased it in France but now am in Ghana. I was using the polaroid tablet and the screen went off.
I tried to put it on and it goes through the process of booting but it just cant go to the home screen where I can touch icons and use the device.
in order words, it hangs and never boots to home screen and when it even boots to the home screen it is not useable, and the tablet remains non-responsive.
THE SPECIFICATIONS ARE BELOW FOR THE MODEL OF POLAROID TABLET I HAVE:
10.1" Tablet
Touch panel 10.1"
Multi points capacitive
Android 4.1
CPU:ATM7029 QUADCORE 1.2Ghz
Resolution: 1024 x 600
Storage: 16GB Nand flash
RAM: 1 GB DDR III
Micro Card Reader Max 32GB
Micro USB Port + OTG
Dual Digital Camera 2MP/0.3MP
WIFI 802.11b/g/n
Bluetooth
HDMI
Battery Li-ion 5000mAh
I have tried several approaches such as
1. discharging the tablet completely, charge and trying to power on.. this approach did not work.
2. I entered rom(by holding the volume up, inserting the usb cable and pressing the power button 3 times) and selected factory reset. it didnt work
3. i entered rom again and tried wipe cache and it didnt work also.
I went to polaroid support and they said the device is not on their support list and possibly not from them.
am so much confused now and any help or suggestions are very much welcome. Thanks in advance
flash the stockrom
iwjosi said:
flash the stockrom
Click to expand...
Click to collapse
there is no rom on the website that seems to be compatible with the model i have. are there general roms that could fit?
ask someone for rom dump
jime1 said:
ask someone for rom dump
Click to expand...
Click to collapse
If i could get any help, Jime, i woould go on and take it. I only know xda. I am ready to try anything. If you could help me with one, i would be very grateful. thank you.
owusupisco said:
If i could get any help, Jime, i woould go on and take it. I only know xda. I am ready to try anything. If you could help me with one, i would be very grateful. thank you.
Click to expand...
Click to collapse
WAIT!! Polaroid support said its not from them!!??? what does that mean! thats confusing ..is it an original genuine device bro..?? make it sure..
---------- Post added at 09:12 PM ---------- Previous post was at 09:09 PM ----------
owusupisco said:
If i could get any help, Jime, i woould go on and take it. I only know xda. I am ready to try anything. If you could help me with one, i would be very grateful. thank you.
Click to expand...
Click to collapse
Have you tried this link
http://southerntelecom.com/polaroidsupport/firmware_guide.html
Heloo all,
I have a serious problem with my allview speed 2 quad tablet.After a restart my tablet always opened in recovery mode but in that menu i couldn't move down or up because the touchscreen seems that it doesn't answer to touch.I try different software and flash them with PhoenixSuit but until now i didn't find the right one.I try a original firmware(Allview2_M809Q5_20130903) from a thread around here but after i flash it the tablet open in the menu but the touch doesn't respond to command.
I tryed all version of Onda v812 software:
-V812Core4_v1.35
-V812Core4-V1_v2.0
-V812Core4-V5_v2.0
-V812Core4-V5_v1.35,but in all those version the camera and the wifi motherboard isn t recognized by the Onda software so i can't use camera and WIFI.
Anyone can help me with a original software for this tablet or a modify image firmware that works on this tablet?
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
I have sent you a private message
Where to get firmware to this device? Astar-y3 v11 i search everywhere
rock6963 said:
I have sent you a private message
Click to expand...
Click to collapse
Mine is Astar-y3 v11 10.1 the board is GA10H_V1.1 20141110
I been search for the firmware everywhere without any luck
This rom will works fine for your tablet , http://www.filefactory.com/file/15k...X0233_DBL2855_ESP8089_GSL3675_HD_20150206.rar
Flash (iso) file for Softwinner V11 A33
Hy,
I am looking for flash possibilities, because I deleted settings app from my Softwinner V11 chinese tablet, and it stays at first logo.
Android Build: astar_y3_eng 4.4.2 KVT49L 20150403 test-keys
Vendor: sun8i
SDK version: 19
Thanks in advance
Attila
all winner v11 10.1" tablet
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
akapusy said:
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
Click to expand...
Click to collapse
i'll send a PM with links, asap
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
What about gps ? Tablet : softwinner 717
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
Hey, I got 2 similar tablets for my kids - both are plagued with malware that won't go away on factory resets - du speed booster, du battery meter, 'facebook' popups on bottom right corner (kids don't have FB).....
The tablet seems to be rooted, and there's a recovery already in place.
Could someone kindly give me a malware-free ROM to flash please ? Any maybe indicate how to go about it ?
Basic info should be fine - I've rooted and custom rommed a number of devices....
thanks a bunch!
David
Hi would anyone happen to have the links to this firmware s my astar-y3 10.1 tablets giving me trouble?
Cheers
digitiser dont work now
gewoonrobbie said:
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Click to expand...
Click to collapse
my digitiser does not respond at all
I can see that you have been bombarded.
Sorry that so many people are looking to you for a33 flash files and i am additionally sorry for adding to it. My a33-10ql-v1.1 flash file seems to be the "Bigfoot" of flash files. I cannot, for the life of me, find the file. I have been searching, relenlessly, since December last year. Im not usually one to stack on a full pile but i sure could use the help. If you could bring youself to find the time i would be forever greatful. Thank you, whether you can or cannot. Have a great evening.
A few days ago I rooted my phone, using ADB commands it let me but into bootloader but my phone didn't show the option to boot into recovery. It turned out i had to use another usb-c cable and then it did