hi i have an allwinner tab similar hardware to ainol novo 7 advanced
i flashed few firmwares on it of different tabs( ployer momo 9 , ly f1) and they were working good
except novo 7 advanced firmwares ( touch was not working at all )
then i flashed a different firmware(onda v140) on it and the screen went white when powered on .
then again i flashed my default firmware everything is working now but touch screen is responding very differently . this is a capacitive touch . i have even tried flashing those firmwares which were working perfectly before but now the problem is common in all firmwares i flash .
see the video
http://www.youtube.com/watch?v=T1IZqA-verU
then after that i tried flashing onda firmwares for 7 inch tablet that has auto recalibration of screen function after flash.
the touch points changed from previous one.
now my question is since this is a software/drivers issue how can i get it back
is my tablet bricked ? any chance f bringing it back to life.
rest everything is working fine including camera. and i am able to use adb on pc and run commands easily ..
please help anyone
please please please !!
thanks
the firmware that i flashed accidentally was for 9.7 inch tablet and after that the controls changed .
does any one has a solution
same thing happened with another guy .
http://www.pandawillforum.com/showthread.php?7918-momo9-touck-problem-please-help-me!!
same problem . please somebody help
have you tried to shutting it down by holding power button for a long time (it will skip the do you want to shutdown option) and turn it back on again?
i had a trouble once with mine. a lot of resets (the small hole button) and reflashing ICS did not help. but strangely when i shut it down normally like that, it came back normal
edited: sorry if it doesnt work, my problem came suddenly, not because of changing firmware.
Don !
I Know how to make you solve your prob ! Just flash momo9 compatibility 1.2.0.zip:good:
Related
greetings, excuse my poor english please.
I'm using an Arnova 7 G1 tablet with the last official firmware (jul. 2011)
When flashing it with rooted YAR 0.28 rom using RKAndroidBatchUpgrade.exe the tablet screen showed fuzzy pixels and system freezes.
I' power it off, but when i power it on, there was no life sign : no boot , no ARNOVA logo , and no connection with XP.
I tried the RESET button , but no chance !!!.
Did i killed my tablet, and is there any way to recover it -any chance to be detected by XP to reflash. Is there any way to open it and short some circuit for some hot reset ????.
Please Help
thanks in advance.
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
hi all,im not sure iff this is ment to be posted here so iff its not could some kind mod move it to appropriate place,here is my problem:
i rooted this fone bout 4 weeks ago and installed cwm5.0 perm and everything was fine,my wife accidently dropped the phone and broke the digitiser and screen,finally monday digitiser and lcd finally came,so after reading up and watching youtube i replaced both.
I then turned on fone and i think its soft bricked but not sure,i dont no iff me taking it to bits as dun this but really need some help.
back to it,when the fone is turned on it boots up samsung galaxy ace gt-s5830i and plays boot up tune.
Every 2 or 3 boots it goes to a some sort of home screen just like it should but 3 quarters of the screen has the sammy logo on and the top quarter it as the bt icon and facebook icon just like it would if it worked ok but sticks with what i just said.i no the digitiser works because wen the baclite goes out i swipe screen it lites back up.
Also i no screen is ok because i can get it in to download mode and screen looks perfect.
I cant enter recovery mode no matter what i try.
Also the sd card that i saved cwm and root on is not detected by the fone,the fone is recognised py the pc but when i goto removeable storage it says please insert disk,this card defo works because i put it in my note 2 everything is there.
And i did make a backup (nandriod backup) of the fone using cwm b4 i started messing with roms but odin wont load it .
So help please, this fone is only 6 weeks old and my wife is driving me up the wall about it so all info is appreciated,and yes i have seached and tried nearly everything on here and other sites but still the same,
and sorry again iff this is in the wrong place and thanks for reading
by the way i have a friend with the exact same same fone,can i use that fone in someway without damage it to help me?
And this is what it says on about fone
Model: GT-S5830i
Andriod ver: 2.3.6
baseband ver: 5830iXXLK1
Kernel ver: 2.3.35.7 [email protected] 234#1
Build number Gingerbread.XXLK3
???
come on guys suym of must of had the same prob as im having.............
[HELP] N9589T Touch Screen Problem
My phone was bricked, after alot searching i unbricked the phone using preloader for star7589. But now i have other problem: After installing the latest firmware 20130527 http://bbs.ydss.cn/thread-329790-1-1.html
My touch screen doesnt work properly + buttons back and menu don't work properly.
I've made video for my problem http://www.youtube.com/watch?v=zaHWTitL-is
I've tried a lot other roms for n9589 + other models but the problem is still here
Can you help me to fix the problem, i really want to fix my phone.
Thanks for reading my thread
Can anyone help me, i realy need your help.
.....
Bump! I need your help guis
Hi Experts . Could you please help me on the issue I have .
I have Flashed the Rom downloaded from XXX site which says update 12/10 but unfortunately that was fake rom/buggy and I flashed it now my screen /display everything fine .But the Touch in the phone became Inverted .Pressing something it does not press or open something else ..Pressing down area of screen opens up the applications on up area...
I have Done the following so far
1. Flashed the Official Firmware from Ulehone Website .
2. Restored the NVRAM backup taken earlier .
3. Tested with MTK engineering Tool . In validation It shows me point error .XXX55XX (Some numbers)
4. Touch screen area shifted to left side ..Right Side Corner it does not show any Tocuh in Testing .
5. I suspect that there is Touch Axis issues as Touch is now inverted .
Please help me to fix this or guide me the right tool to fix ..........Please HELP HELP >.........Help
Did I Lose my calibrated data of Tocuh screen
shanky76 said:
Hi Experts . Could you please help me on the issue I have .
I have Flashed the Rom downloaded from XXX site which says update 12/10 but unfortunately that was fake rom/buggy and I flashed it now my screen /display everything fine .But the Touch in the phone became Inverted .Pressing something it does not press or open something else ..Pressing down area of screen opens up the applications on up area...
I have Done the following so far
1. Flashed the Official Firmware from Ulehone Website .
2. Restored the NVRAM backup taken earlier .
3. Tested with MTK engineering Tool . In validation It shows me point error .XXX55XX (Some numbers)
4. Touch screen area shifted to left side ..Right Side Corner it does not show any Tocuh in Testing .
5. I suspect that there is Touch Axis issues as Touch is now inverted .
Please help me to fix this or guide me the right tool to fix ..........Please HELP HELP >.........Help
Click to expand...
Click to collapse
Here I can show the exact problem
https://youtu.be/VJtSoBttvkc
Hi XDA Mods , It is very known problem If someone can share experience of any fixes it may help many who are struggling with this issue
Hi,
To better assist you, please post your device model number.