Hi, I have tablet pc with Telechip 8923. I tried to change resolution with LCD resolution app, and after reboot it doesn't start. Stuck on ANDROID booting last page. I didn't have firmware, and I tried to install update.zip from freelander tablet, and then after reboot it was worse. Only 1s shows android screen and goes black. I talked to manufacturers and they sent me my tablet update.zip but its doesn't helped. Nothing changed. first screen and after 1 second goes black.
What to do? need full erase and then install update.zip? if there is way like this. Or need drivers and firmware from computer? to install via USB? I know It's my big mistake.
I have only update.zip
Tablet is with DVB - T, GPS, 1,2Ghz cortex A5 dual.
Tablet called a777
operating system is 4.0.3
new question then. what it's in update.zip? exiting rom update files? not new full rom?
hey! need info!! Can I broke tablet with wrong update.zip ?? maybe other was wrong too? if I'll have gut update.zip for my tablet, it can rewrite new good firmware?
Related
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
i have a chinese tablet 9.7" with android 4.0.4. i have installed titanium backup it shows status that device is rooted but the prob is that i cant found cwm for my tablet i have tried rom manager also but no luck.
bcause tablet restart after every five to 10 min and very slow also.
here is all details plz give me link to good rom and cwm and all other which i needed.
Name.
Apex IPS pro
MOdel No.
S5
Android Version
4.0.4
Baseband version.
1.4rc3.
kernel version
3.0.8+
[email protected] #2
i have found cwm and install it through teminal emulator and install cyanogen mod 10 after enter in cwm i have wipe/factory reset and install CM10 rom and reboot but after that my chinense tablet wont show any thind just showing balck screen i tried to enter in cwm but nothing will appear i press tha power button lcd suddenly off and again black screen will appear what should i do plz help
Build No.
03F2-P1-H1-H01-AH40-20120708T
plz help
i have found cwm and install it through teminal emulator and install cyanogen mod 10 after enter in cwm i have wipe/factory reset and install CM10 rom and reboot but after that my chinense tablet wont show any thind just showing balck screen i tried to enter in cwm but nothing will appear i press tha power button lcd suddenly off and again black screen will appear what should i do plz help
thanks in advance
Do you want to wipe data?
Try it on setting in the mobile only.
Do you want to wipe dalvik-cache, then do it through rom manager.
Wiping is easy, why do u want to do it through cwm only????
Ur tab doesn't have all hardware support i feel...
It's bricked... If you want to enjoy custom ROMs and kernels, at least get a device that is supported.
display
sanjaykumar.sanjay69 said:
Do you want to wipe data?
Try it on setting in the mobile only.
Do you want to wipe dalvik-cache, then do it through rom manager.
Wiping is easy, why do u want to do it through cwm only????
Ur tab doesn't have all hardware support i feel...
Click to expand...
Click to collapse
it doesnt show display only black screen will appear after i power on or i plug in charger only bright black screen... how to wipe i cant see any thing.
plz help
Lim Wee Huat said:
It's bricked... If you want to enjoy custom ROMs and kernels, at least get a device that is supported.
Click to expand...
Click to collapse
yes you are right sir... i have sony ericsson arc s also it had a problem like this and it stuck on boot loop i found sony updator and update my phone so i want to ask that any tool that update android or to restore my orignal firmware... i have backup my rom with cwm and that is present in sdcard but how can i restore that because tablet doesnt display.
help plz
i have try live suit but it always show yellow exclamation mark when i connect the tablet and i also not find the correct firmware for my tablet .....
its not bricked sir coz i have read in many forums that allwinner a10 chipset is practically unbrickable
what should i do any onew plz help me
looks like your tablet is having Allwinner A10 BOXCHIP CPU.
Do you have the original stock .img ROM( not the cwm backup) ?
if yes then press the power button for about 10-15 secs to switch it off then connect it to PC and try to flash it with livesuit tool.
have you look on needrom.com if have the rom for you ?
nooooooooooooooo
shadab007g said:
looks like your tablet is having Allwinner A10 BOXCHIP CPU.
Do you have the original stock .img ROM( not the cwm backup) ?
if yes then press the power button for about 10-15 secs to switch it off then connect it to PC and try to flash it with livesuit tool.
Click to expand...
Click to collapse
no i dont have stock firmware thats the problem i have find on many sites but no luck manufacturer have a site but there are too many models of named S5 what to do
Souled62 said:
have you look on needrom.com if have the rom for you ?
Click to expand...
Click to collapse
there is no rom for my tab actually i dont know what shoud i type to search the correct rom for my tab i have searced cortex A8 rom and boxchip firmware etc etc, with cortex A8 rom that i have livesuit show always yellow exclamation mark
ubaidbhatti said:
no i dont have stock firmware thats the problem i have find on many sites but no luck manufacturer have a site but there are too many models of named S5 what to do
Click to expand...
Click to collapse
ok.... can you provide me the full info of your tablet?
pm me.... lets talk there.
Try a factory reset or you could simply try a root program and try un rooting it then rooting it back cause my phone was slow after root but I tried again and it worked like a charm (back up before formating)
DoNt FeEd ThE tRoLls !
(PrOhOpEr) <------ I own !
Please thank me it only takes a click or two!
i have flashed wrong rom and my tab dosent show any display then how can i factory reset when i cant see any thing
I am having the same issue, I am trying to revive a Chinese "vigo" 7 in tablet for kicks.
I get the boot screen and when I plug it into my win 7 PC I can see a drive like icon but I cant access it .
Livesuite just complains about nothing needs updating when I try that.
7" 5-Point Capacitive Touch Screen
Boxchip A10 1.2Ghz Cortex A8
Android 4.0 w 4GB Memory and 512MB RAM
Micro SD (Upto 32GB)
HDMI, Headphone Socket, Mini USB
Wireless N w Front Camera
Supports most Video and Audio formats
Li-ion battery 3000mAH
I can get it to the boot and splash screen but thats it, I can see windows is trying to load it but the drivers dont seem to be there but there is no complaint from windows either and nothing in the Device manager.
I have Livesuit here and installed but it cant see the tablet. Windows shows 2 new "drives" when I plug the tablet into my PC but I cant access them.
Any thoughts?
TIA
Hi,
i have Dmtech tablet 1032dc. I have not tried to flash, upgrade or anything, it just wont work anymore. Last time it worked was everything ok, was shutted down properly and placed in a box.
Now it is stuck on load screen, i have tried factory reset, sometimes it freeze on formatting data, other times it finishes wiping data. But after restart boot logo hangs as before. I have tried to connect to pc with a usb cable but it wont show any devices in device manager (only if is turned on and stuck in loading animation it shows 2 removable devices as partitions, who cant be accessed). Tied Win xp and win 8.1.
CPU: aml8726-mxs 1,5 Ghz
Android 4.1
Recovery system is original
What steps should i take next in order to make it working again?
All i can think of is to flash original firmware with sd card, but i cant find any roms of this device. Pls help.
firststepsandroid said:
Hi,
i have Dmtech tablet 1032dc. I have not tried to flash, upgrade or anything, it just wont work anymore. Last time it worked was everything ok, was shutted down properly and placed in a box.
Now it is stuck on load screen, i have tried factory reset, sometimes it freeze on formatting data, other times it finishes wiping data. But after restart boot logo hangs as before. I have tried to connect to pc with a usb cable but it wont show any devices in device manager (only if is turned on and stuck in loading animation it shows 2 removable devices as partitions, who cant be accessed). Tied Win xp and win 8.1.
CPU: aml8726-mxs 1,5 Ghz
Android 4.1
Recovery system is original
What steps should i take next in order to make it working again?
All i can think of is to flash original firmware with sd card, but i cant find any roms of this device. Pls help.
Click to expand...
Click to collapse
You may find a solution here [Q] Help unbrick AMLogic aml8726-mx tablet by Futaba0rus
Because there is not a specific forum for your device, this thread will be moved to general/help
sd_shadow said:
You may find a solution here [Q] Help unbrick AMLogic aml8726-mx tablet by Futaba0rus
Because there is not a specific forum for your device, this thread will be moved to general/help
Click to expand...
Click to collapse
Thanks for reply. Anyway i already fixed it, tablet is booting now. Lots of information on this forum, good job guys
firststepsandroid said:
Thanks for reply. Anyway i already fixed it, tablet is booting now. Lots of information on this forum, good job guys
Click to expand...
Click to collapse
Great, thanks for the update.
Solution ???
Please post how you fix this problem.I have the same issue and maybe others are looking for the fix too.
Thank you
hello everybody...
i have a (spanish jazztel) i-joy 10" tablet, cortex a7 quad core.
i made a mess with titanium backup and when tried to recover factory settings i realized that i had screwed the recovery data.
system would boot up, tablet would work but with many errors and "stopped working" pop ups.
i looked for a stock rom just to find out there is NONE in the WHOLE INTERNET!!!
then, googling here and there i read about some compatible roms, from allwinner, kalley and other chinese brands.
i downloaded all img files i could find, i flashed them correctly with phoenix usb pro, one after another.
first two worked well except for the cameras, that wouldnt work.
then i tried ICOU10GT firmware, flashed correctly...but touch DOES NOT work, i cannot go any further from welcome screen since the touch screen is not recognized.
i am 100% sure is not a hardware problem, all physical buttons work, screen works but not touch.
since i cannot reach the "enable usb debug mode" option i cannot flash any other img.
when entering recovery mode, if i choose update from adb the tablet is not fully recognized by windows (driver says device cannot start).
i´ve tried sd burning with phoenixcard but doesnt work either, tablet doesnt boot up from external sd card.
is there any way to recover this working-but-bricked tablet?
please help!!!
------------------
if there is not....is there a 100% safe and sure way to commit a "perfect murder" with the tablet to send it to post-service and being able to claim "it just stopped working" and them not being able to see i flashed it? i guess you know what i mean.
planetapluton said:
hello everybody...
i have a (spanish jazztel) i-joy 10" tablet, cortex a7 quad core.
i made a mess with titanium backup and when tried to recover factory settings i realized that i had screwed the recovery data.
system would boot up, tablet would work but with many errors and "stopped working" pop ups.
i looked for a stock rom just to find out there is NONE in the WHOLE INTERNET!!!
then, googling here and there i read about some compatible roms, from allwinner, kalley and other chinese brands.
i downloaded all img files i could find, i flashed them correctly with phoenix usb pro, one after another.
first two worked well except for the cameras, that wouldnt work.
then i tried ICOU10GT firmware, flashed correctly...but touch DOES NOT work, i cannot go any further from welcome screen since the touch screen is not recognized.
i am 100% sure is not a hardware problem, all physical buttons work, screen works but not touch.
since i cannot reach the "enable usb debug mode" option i cannot flash any other img.
when entering recovery mode, if i choose update from adb the tablet is not fully recognized by windows (driver says device cannot start).
i´ve tried sd burning with phoenixcard but doesnt work either, tablet doesnt boot up from external sd card.
is there any way to recover this working-but-bricked tablet?
please help!!!
------------------
if there is not....is there a 100% safe and sure way to commit a "perfect murder" with the tablet to send it to post-service and being able to claim "it just stopped working" and them not being able to see i flashed it? i guess you know what i mean.
Click to expand...
Click to collapse
In the edit comment you wrote "Last edited by planetapluton; 28th May 2015 at 07:44 AM. Reason: problem solved!" This thread will be closed.
If you have another issue with this device, please post in Android Q&A, Help & Troubleshooting
i try to able ''multiwindow'' in my k1 with marshmallow (the latest version table without stylus)
and i modify the build.prop ... something gone wrong when i restart mi tablet
start nvidia logo and them nothing happens
my tablet is rooted and i have twrp
what can i do ??
i try:
-put on the build.prop with adp many times.. (i think that i make the right way.....)
-factory reset
i need to install a new rom? sctock rom?
please help me, i only have my table one month :crying: