bricked onda vi40 ultimate - Android Software/Hacking General [Developers Only]

Hi all
I hope someone can help I think I may have bricked my onda vi40 ultimate tablet I was running ics 4.04 latest update from onda
I did try to flash CyanogenMod 9 and I managed to get it installed however now my tablet is dead (i wont power up the screens black)
I think it’s in recovery mode as ive tried to re-flash with live suit back to ver 4.04 however it gets stuck on 3% and wont go any further
Any ideas????
i followed this guide Unofficial CyanogenMod 9 for many AllWinner A10

Related

HELP ME PLEASE ( TOUCH SCREEN PROBLEM ) flash issue

hi i have an allwinner tab similar hardware to ainol novo 7 advanced
i flashed few firmwares on it of different tabs( ployer momo 9 , ly f1) and they were working good
except novo 7 advanced firmwares ( touch was not working at all )
then i flashed a different firmware(onda v140) on it and the screen went white when powered on .
then again i flashed my default firmware everything is working now but touch screen is responding very differently . this is a capacitive touch . i have even tried flashing those firmwares which were working perfectly before but now the problem is common in all firmwares i flash .
see the video
http://www.youtube.com/watch?v=T1IZqA-verU
then after that i tried flashing onda firmwares for 7 inch tablet that has auto recalibration of screen function after flash.
the touch points changed from previous one.
now my question is since this is a software/drivers issue how can i get it back
is my tablet bricked ? any chance f bringing it back to life.
rest everything is working fine including camera. and i am able to use adb on pc and run commands easily ..
please help anyone
please please please !!
thanks
the firmware that i flashed accidentally was for 9.7 inch tablet and after that the controls changed .
does any one has a solution
same thing happened with another guy .
http://www.pandawillforum.com/showthread.php?7918-momo9-touck-problem-please-help-me!!
same problem . please somebody help
have you tried to shutting it down by holding power button for a long time (it will skip the do you want to shutdown option) and turn it back on again?
i had a trouble once with mine. a lot of resets (the small hole button) and reflashing ICS did not help. but strangely when i shut it down normally like that, it came back normal
edited: sorry if it doesnt work, my problem came suddenly, not because of changing firmware.
Don !
I Know how to make you solve your prob ! Just flash momo9 compatibility 1.2.0.zip:good:

Wanted: a Working CnM touchpad 9.7SC firmware image

I have tried to install CM10 on my CnM touchpad 9.7 SC and something went wrong, My tablet features the allwinner X10 chip and I tought that I could give it a try installing CM10 to get most out of the device.
Now I have flashed the firmware on the Cnm website, the firmware turns out to be not working right, I get a messed up booting creen and when boots up it's just a black/grey and white messed up screen.
I am now looking for a working firmware image for my CnM touchpad, if any of you guys has one please upload it for me

Onda V919 Dual Boot Firmware . download here ..

http://chinagadgetsreviews.blogspot.co.uk/2015/01/download-android-444-stock-firmware-for.html
This may help rom makers for other tablets as the bios is also downloadable, and as we know you can boot between windows 8 and Andoid without rebooting your tablet.
Hope this helps rom makers, to get a better rom ready for the Onda V919 Dual Boot when they arrive in stock

[Q] Allview speed 2 quad (onda v812 rebranded)

Heloo all,
I have a serious problem with my allview speed 2 quad tablet.After a restart my tablet always opened in recovery mode but in that menu i couldn't move down or up because the touchscreen seems that it doesn't answer to touch.I try different software and flash them with PhoenixSuit but until now i didn't find the right one.I try a original firmware(Allview2_M809Q5_20130903) from a thread around here but after i flash it the tablet open in the menu but the touch doesn't respond to command.
I tryed all version of Onda v812 software:
-V812Core4_v1.35
-V812Core4-V1_v2.0
-V812Core4-V5_v2.0
-V812Core4-V5_v1.35,but in all those version the camera and the wifi motherboard isn t recognized by the Onda software so i can't use camera and WIFI.
Anyone can help me with a original software for this tablet or a modify image firmware that works on this tablet?

My new tecno 7C android 5.0 is brocken! Help please...

Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.
Hello! Nobody to answer me?

Categories

Resources