Database Info

How to root P6200 Galaxy Tab running ICS v 4.0.4(Austria)

I upgraded my P6200 Galaxy Tab 7.0 plus with Austria ICS 4.0.4. Now, how to root this version? Please, help me or write a tutorial post. I'll be waiting.........

Root Galaxy Tab P6800/P6200 ICS 4.04
kyawswaraung said:
I upgraded my P6200/P6800 Galaxy Tab 7.7/7.0 plus with Austria ICS 4.0.4. Now, how to root this version? Please, help me or write a tutorial post. I'll be waiting.........
Click to expand...
Click to collapse
It's Root for Galaxy tab 7.7/7.0 Plus ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800/P6200 ICS4.0.4
Instruction Below.
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
* Apply update from internal storage, instead of external storage
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once cwm recovery is installed, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
When Finish, REBOOT. You're done!
Credit:
Great thanks to, http://forum.xda-developers.com/showthread.php?t=1756304
Tutorial by: Wayne Yong
http://www.wayneyong.com

Thanks a lot. I'll try this evening and I'll get back you tomorrow.
Thanks again

kyawswaraung said:
Thanks a lot. I'll try this evening and I'll get back you tomorrow.
Thanks again
Click to expand...
Click to collapse
Confirmed on my 6200 with ICS - followed steps above and voila - sorted
Thanks

michaelmmr said:
Confirmed on my 6200 with ICS - followed steps above and voila - sorted
Thanks
Click to expand...
Click to collapse
After i enter to CWM recovery, I choosed Install update from sd and choose root.zip but there are four option after that. All are NO.
How can I choose YES? When I choose NO, it back to previous state and at the top of all NO option, the sentence say " Can't mount SD"
What should I do?
Thanks for your confirm.

kyawswaraung said:
After i enter to CWM recovery, I choosed Install update from sd and choose root.zip but there are four option after that. All are NO.
How can I choose YES? When I choose NO, it back to previous state and at the top of all NO option, the sentence say " Can't mount SD"
What should I do?
Thanks for your confirm.
Click to expand...
Click to collapse
Use your volume button to scroll up (or down), there are a lot of NO's but there is a YES there

michaelmmr said:
Use your volume button to scroll up (or down), there are a lot of NO's but there is a YES there
Click to expand...
Click to collapse
Thanks a lot all. I got it. Finally my device has been rooted. ( I found YES option)

Thank you.
Just upgraded from the cranky GB and now rooted!
Will there be a CWM icon (cos I don"t see it), I have install ROm mananger as well.

michaelmmr said:
Use your volume button to scroll up (or down), there are a lot of NO's but there is a YES there
Click to expand...
Click to collapse
i've try all the step carefully but still not root my phone
it's say can't mount sd card update something like that...help me please

jerung16 said:
i've try all the step carefully but still not root my phone
it's say can't mount sd card update something like that...help me please
Click to expand...
Click to collapse
hi jerung please select install from internal you can see root.zip file there once completed just back and reboot thanks:good:

hi,I've upgraded my tablet's OS to Android 4.0.4 Vietnam! Is it any different than the root you've given or it's the same?!
My Tablet:Samsung Galaxy P6200+
OS:Android 4.0.4 Vietnam
My Country:Iran
Thank's a lot

yong223 said:
It's Root for Galaxy tab 7.7/7.0 Plus ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800/P6200 ICS4.0.4
Instruction Below.
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
* Apply update from internal storage, instead of external storage
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once cwm recovery is installed, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
When Finish, REBOOT. You're done!
Visit webpage for more details:
StageAccessorize International
Contact: Waine Yong
[email protected]
+65 91922227
Credit:
Great thanks to, http://forum.xda-developers.com/showthread.php?t=1756304
Click to expand...
Click to collapse
hi,I've upgraded my tablet's OS to Android 4.0.4 Vietnam! Is it any different than the root you've given or it's the same?!
My Tablet:Samsung Galaxy P6200+
OS:Android 4.0.4 Vietnam
My Country:Iran
Thank's a lot

UNTD said:
hi,I've upgraded my tablet's OS to Android 4.0.4 Vietnam! Is it any different than the root you've given or it's the same?!
My Tablet:Samsung Galaxy P6200+
OS:Android 4.0.4 Vietnam
My Country:Iran
Thank's a lot
Click to expand...
Click to collapse
Same method. You can try this. :cyclops:

yong223 said:
It's Root for Galaxy tab 7.7/7.0 Plus ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800/P6200 ICS4.0.4
Instruction Below.
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
* Apply update from internal storage, instead of external storage
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once cwm recovery is installed, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
When Finish, REBOOT. You're done!
Visit webpage for more details:
StageAccessorize International
Contact: Waine Yong
[email protected]
+65 91922227
Credit:
Great thanks to, http://forum.xda-developers.com/showthread.php?t=1756304
Click to expand...
Click to collapse
success! thanks a lot dude..working fine with ICS (Malaysia)

Not working
braderj said:
success! thanks a lot dude..working fine with ICS (Malaysia)
Click to expand...
Click to collapse
Hi, I am running ICS 4.04 on my P6200. My recovery only gives me an option to install from external SD but does not read the installed sd card. Tried it with two different SD cards. Any help please

Help needed. I've brick my GT-P6200L
Can anyone please help me unbrick my GT-P6200L.
Got messed up somewhere between cwm.
Now everything all gone.
I can't boot up at all no matterwhat i've tried.

kyawswaraung said:
After i enter to CWM recovery, I choosed Install update from sd and choose root.zip but there are four option after that. All are NO.
How can I choose YES? When I choose NO, it back to previous state and at the top of all NO option, the sentence say " Can't mount SD"
What should I do?
Thanks for your confirm.
Click to expand...
Click to collapse
I had the same problem just format ur sd card or change it it will work
Sent from my GT-P6200 using xda premium

authentication failed
yong223 said:
It's Root for Galaxy tab 7.7/7.0 Plus ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800/P6200 ICS4.0.4
Instruction Below.
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
* Apply update from internal storage, instead of external storage
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once cwm recovery is installed, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
When Finish, REBOOT. You're done!
Visit webpage for more details:
StageAccessorize International
Contact: Waine Yong
[email protected]
+65 91922227
Credit:
Great thanks to, http://forum.xda-developers.com/showthread.php?t=1756304
Click to expand...
Click to collapse
It's telling me the authentication failed after trying to install the root.zip. Do you know what i can do or am I doing something wrong?

Can anyone teach me how to UNroot?

Thanks
UNTD said:
hi,I've upgraded my tablet's OS to Android 4.0.4 Vietnam! Is it any different than the root you've given or it's the same?!
My Tablet:Samsung Galaxy P6200+
OS:Android 4.0.4 Vietnam
My Country:Iran
Thank's a lot
Click to expand...
Click to collapse
Thanks :good:
It worked
It helped solve my Copy and Paste problems too.

[Q] HTC Desire How to

Hello guys
First of all, i have red all main posts about this issue and could not find the answer i am needing; may be it is here somewhere, i just can not find it. My english is not perfect and this could be a problem when trying to find specific answers.
I have, through Revolutionary, done something to my phone that i cannot say they are well done... i tried to root it few years ago and i got stucked.
here is what is happening:
When i turn my htc on, whil pressing volume down, appears the so called white screen, saying this:
--------------------------------------------
-Revolutionary.
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL- SYNT0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
HBOOT
vol up - prev item
vol down - next item
power - slect item
FASTBOOT
RECOVERY
CLEARSTORAGE
SIMLOCK
----------------------------------------------
My questions:
1) What does this all mean?
2) What should i do next to install (step by step) to install android 4.0 or a previous version just to see if it works??
Thanks for the attention/help guys.. sorry my english, but i just got stuck here!
Cheers
andre32065

andre32065 said:
Hello guys
First of all, i have red all main posts about this issue and could not find the answer i am needing; may be it is here somewhere, i just can not find it. My english is not perfect and this could be a problem when trying to find specific answers.
I have, through Revolutionary, done something to my phone that i cannot say they are well done... i tried to root it few years ago and i got stucked.
here is what is happening:
When i turn my htc on, whil pressing volume down, appears the so called white screen, saying this:
--------------------------------------------
-Revolutionary.
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL- SYNT0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
HBOOT
vol up - prev item
vol down - next item
power - slect item
FASTBOOT
RECOVERY
CLEARSTORAGE
SIMLOCK
----------------------------------------------
My questions:
1) What does this all mean?
2) What should i do next to install (step by step) to install android 4.0 or a previous version just to see if it works??
Thanks for the attention/help guys.. sorry my english, but i just got stuck here!
Cheers
andre32065
Click to expand...
Click to collapse
well man u unlock the phone with revolutionary and it works.
now download the rom u like put in the main folder of your sd card
now in the white sreen (pwr button & volume -) select recovery,
go to -> wipe -> wipe cache & dalvin cache then go back and select flash a zip from your sd card (the zip of the rom of course) follow the instruction and wait

Husky34 said:
well man u unlock the phone with revolutionary and it works.
now download the rom u like put in the main folder of your sd card
now in the white sreen (pwr button & volume -) select recovery,
go to -> wipe -> wipe cache & dalvin cache then go back and select flash a zip from your sd card (the zip of the rom of course) follow the instruction and wait
Click to expand...
Click to collapse
nice!! just put the rom in my sd card and do it from recovery?? wow... 2 years to figure this out!
thanks a lot...
one more question... from where can i download the zip file of android 4.0 to put in my sd card
OR
where can i download cyanogen mod (the rom i want to install) and which is the latest version
thanks a lot
i am downloading the first link here
http://download.cyanogenmod.org/?type=stable&device=bravo
just put this zip file in sdcard and follow your instructions?
cheers

yes
"This" is a list of our Desire S rom, have a look an take the one u like
---------- Post added at 03:55 PM ---------- Previous post was at 03:53 PM ----------
andre32065 said:
nice!! just put the rom in my sd card and do it from recovery?? wow... 2 years to figure this out!
thanks a lot...
one more question... from where can i download the zip file of android 4.0 to put in my sd card
OR
where can i download cyanogen mod (the rom i want to install) and which is the latest version
thanks a lot
i am downloading the first link here
http://download.cyanogenmod.org/?type=stable&device=bravo
just put this zip file in sdcard and follow your instructions?
cheers
Click to expand...
Click to collapse
mmm the rom in your link is old and with old android..from my link above u can find newest rom with the last android

and when i hit recovery, it appears a black screen with a cell phone in it and green icon - this green icon changes to a triangle with exclamation poin in it... and red! may be something wrong
cheers

andre32065 said:
and when i hit recovery, it appears a black screen with a cell phone in it and green icon - this green icon changes to a triangle with exclamation poin in it... and red! may be something wrong
cheers
Click to expand...
Click to collapse
press volume + and pwr button CWM should appear

Husky34 said:
press volume + and pwr button CWM should appear
Click to expand...
Click to collapse
i am in that white screen now...
i have the file i told you in sd card
i press recovery right??
when i do this, a black screen and green icon appears but it turn into a red icon, saying that is something wrong...

GOT A NEW SCREEN!!!
a blue one this time
it has:
-----------------------------------
android system recovery <3e>
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
E: Can't open /cache/recovery/comand (in yellow)
-------------------------------------------------------------
whats next?
thanks a lot for helping me
cheers

andre32065 said:
GOT A NEW SCREEN!!!
a blue one this time
it has:
-----------------------------------
android system recovery <3e>
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
E: Can't open /cache/recovery/comand (in yellow)
-------------------------------------------------------------
whats next?
thanks a lot for helping me
cheers
Click to expand...
Click to collapse
wipe cache partition (and inside wipe cache & dalvin cache)
wipe data (this will delete all your data so make a beckup first )
then press update from sd card and select the rom
np mate

Husky34 said:
wipe cache partition (and inside wipe cache & dalvin cache)
wipe data (this will delete all your data so make a beckup first )
then press update from sd card and select the rom
np mate
Click to expand...
Click to collapse
REBOOTING..................
no changes?? same icons, same everything....
the ROM is just the zip file i downloaded??
i applyed the update from sdcard and my phone looks just the same...
can you tell me whta rom you use?? may be a recent one will work... this did not worked for sure

andre32065 said:
REBOOTING..................
no changes?? same icons, same everything....
the MOD is just the zip file i downloaded??
i applyed the update from sdcard and my phone looks just the same...
Click to expand...
Click to collapse
did you select the rom? wich one is it?
edit:i'm using flinny rom (cyanogen 10.1) , link in my signature

Husky34 said:
did you select the rom? wich one is it?
edit:i'm using flinny rom (cyanogen 10.1) , link in my signature
Click to expand...
Click to collapse
it is the one i told you in previous post... may be old...
i have a zip file with the rom in my sd card...
when i selected the option to upgrade from sd card, i did not have to select any other option, like a file or something...
it rebooted instantly

andre32065 said:
it is the one i told you in previous post... may be old...
i have a zip file with the rom in my sd card...
when i selected the option to upgrade from sd card, i did not have to select any other option, like a file or something...
it rebooted instantly
Click to expand...
Click to collapse
mmm when u boot the phone normally do you have an icon called superuser or superSU in your menu?

Husky34 said:
mmm when u boot the phone normally do you have an icon called superuser or superSU in your menu?
Click to expand...
Click to collapse
no, i do not.

You need a custom recovery like 4EXTrecovery to flash your rom, it will not work with stock recovery.

chninkel said:
You need a custom recovery like 4EXTrecovery to flash your rom, it will not work with stock recovery.
Click to expand...
Click to collapse
where can i find the file of 4EXT and what should i do with it?

follow This topic
u don't need to do step so skip it and in step 4 u don't have to do :
"Boot into recovery, connect your phone to your computer and select fastboot on your phone.
Go to start->run-> type cmd and press enter. A command prompt will now appear.
Type:
Quote:
cd c:\android-tools [press enter]
fastboot flash boot boot.img [press enter]"
those command is only for htc Dev unlocked phone
instead the reaper rom flash the rom u like

here it is: 4extrecovery touch 1.005 rc8

Husky34 said:
follow This topic
u don't need to do step so skip it and in step 4 u don't have to do :
"Boot into recovery, connect your phone to your computer and select fastboot on your phone.
Go to start->run-> type cmd and press enter. A command prompt will now appear.
Type:
Quote:
cd c:\android-tools [press enter]
fastboot flash boot boot.img [press enter]"
those command is only for htc Dev unlocked phone
instead the reaper rom flash the rom u like
Click to expand...
Click to collapse
WHAT STEP I DO NOT NEED TO DO???
will try
thanks a lot...
continue following this topic, i beleive i will find one or two moer questions... thanks a lot...
where did you download your ROM Husky?? can put the link here??
cheers, mate
thanks for the patience

andre32065 said:
will try
thanks a lot...
continue following this topic, i beleive i will find one or two moer questions... thanks a lot...
where did you download your ROM Husky?? can put the link here??
cheers, mate
thanks for the patience
Click to expand...
Click to collapse
np i'm using
Flinny 10.1 version 15
u have to flash this package too after the rom (this is the google application)
just like another rom
Google apps

[Q] TF101 - upgrade or buy a new tablet ?

Hi All, new to this forum... what brought me here is trying to figure out if I can upgrade the TF101 to android higher than 4.0.3 that seems to be the "normal" latest version you can get.
Issues I have are: lockup, freeze, twitter post (crash twitter), screen weird colors (need reboot) etc... Maybe I have some hardware issue... planing to open the case and verify all connectors are ok and well seated.
I just spent 4 hours looking around this forum and saw the KatKiss 4.4.4 thing... I say thing because I have no clue (and did not find how) to install this thing.
So! Is it worth it that I spent hours more on understanding how to upgrade, debug and all... or I just go buy a new tablet?
I saw some post around the twitter issue that did not work either after KatKiss upgrade, so not sure if it's worth it ?
I was looking at the Samsung Pro tablets with 8 cores... seems amazing! But pricy!
Anyhow, recommendations?
If you say... sure try to upgrade to 4.4.4 with KatKiss... ok, I can try that, but from the last 4 hours of reading/looking around, I did not find instructions steps I could understand.
Most of those steps I have not clue what they are!
These builds are designed to be installed from your favorite recovery. MAKE SURE TO INSTALL A COMPATIBLE ANDROID 4.2/4.3 RECOVERY!
TWRP >= 2.3.2.3 is recommended, new TWRP available here
Backup everything !
Go to recovery
Make a full wipe / factory reset (you can skip this step if you're already on KatKiss-4.4, if ever you encounter a problem do the full wipe and try again before reporting )
Format /system (only if Version<026)
Flash the rom
Flash KatKiss gapps
Wipe cache/dalvik
Reboot
Click to expand...
Click to collapse
Thanks for any feedback
Cheers!
Simon

I have the tab pro and i like it a lot.
I also have the tf101 running katkiss.
The katkiss is running smooth for me.
All is well and no issues this far.
So I would say try katkiss.
Verstuurd vanaf mijn SM-G900F met Tapatalk

r2go said:
I have the tab pro and i like it a lot.
I also have the tf101 running katkiss.
The katkiss is running smooth for me.
All is well and no issues this far.
So I would say try katkiss.
Verstuurd vanaf mijn SM-G900F met Tapatalk
Click to expand...
Click to collapse
Would love to try katkiss.... but I did not find a how-to steps I can understand.... Any help would be nice.
:laugh:
Simon

SimonFiliatrault said:
Would love to try katkiss.... but I did not find a how-to steps I can understand.... Any help would be nice.
:laugh:
Simon
Click to expand...
Click to collapse
Hi Simon.
Is your device already rooted?
You need to root your device first.
What android version are you running?
Verstuurd vanaf mijn SM-G900F met Tapatalk

r2go said:
Hi Simon.
Is your device already rooted?
You need to root your device first.
What android version are you running?
Verstuurd vanaf mijn SM-G900F met Tapatalk
Click to expand...
Click to collapse
Device not rooted... Android 4.0.3.
I am looking for step-by-step instructions... if they exist?
Never did that type of mod before.
Thanks,
Simon

SimonFiliatrault said:
Device not rooted... Android 4.0.3.
I am looking for step-by-step instructions... if they exist?
Never did that type of mod before.
Thanks,
Simon
Click to expand...
Click to collapse
Easiest way, use Easyflasher (If your TF101 has a serial number B6O or eariler (Some B7O), it is an SBK1, most B7O and all higher are SBK2) choosing the wrong one in Easyflasher will not do any harm, it just won't work
http://forum.xda-developers.com/showthread.php?t=1688012
1: Flash TWRP recovery with Easyflasher
2. Download KatKiss ROM #33 & Latest Gapps and copy to your MicroSD, stick MicroSD Card into TF101
3: Boot to TWRP Recovery by powering off the TF, then pressing and holding Power & Volume Down until the white text appears at the top of the screen, then quickly hit Volume Up once
4: Goto the WIPE menu, and wipe everything apart from External Storage (This will 100% wipe your TF, so if you have anything you want to keep, back it up, you can also make a Nandroid backup inside of TWRP, so make sure your MicroSD Card has enough room if you choose that)
5: Once everything is wiped, goto the INSTALL menu and install KatKiss ROM you copied to the MicroSD Card (Might have to select External from the INSTALL menu to navigate to the MicroSD Card)
6: When the ROM says it is completed the install, go back to the INSTALL menu and install the GAPPS you also copied to the MicroSD Card
7: Once GAPPS have completed installing (Ignore any messages about failing to mount partitions etc) WIPE Cache and Dalvik Cache (Might ask you immediately after flashing Gapps, if not, do it from the WIPE menu
8: Choose REBOOT > SYSTEM or POWER OFF > REBOOT
9: All being well, you are now running the KatKiss ROM
---
TIPS:
When using Easyflasher, you're gonna need to install the "Universal Naked Drivers" from the Easyflasher thread - use a 32bit Windows 7 for least chance of any problems, 64bit windows requires driver signing, and so do all versions of Windows 8.x, you can use 8.x but you'll need to disable driver signing mode before installing them
---
Any problems, reply here and I`ll check every now and then

ok here's the detail steps I did...
1) I have a TF101, B60... S/N, thus SBK1 (what ever that means!)
2) Using this thread: http://forum.xda-developers.com/showthread.php?t=1688012
- Need APX Drivers: http://forum.xda-developers.com/showthread.php?t=1514942
Found those instructions that partially work:
http://forum.xda-developers.com/showthread.php?t=1514942&page=4
Search in the start menu for Device Manager and open it.
Plug in your tablet via USB while in APX mode (hold power button and volume (+) until the screen turns off).
The driver should try to automatically install off the tablet upon plugging it in to your computer.
If it fails to install, you will have an "Unknown Devices" section in Device Manager.
Right click on Unknown Devices and hit update driver.
Then hit manually install driver. Point the file browser to the root folder of the extracted package that you downloaded.
For clarification: You downloaded the zip in the OP called Universal_Naked_Driver_0.72.zip.
When you extract it, you should get something like Universal Naked Driver 0.72 or something like that.
Point that file browser to the newly extracted folder, NOT the subfolders.
If you point it to the amd64 or the i386 subfolders it will not work. Hope this helps you out!
That is partly true... here's what I did:
1. power button + volume up
2. device manager showed "other devices" - APX
3. right-click APX and update driver
4. point to extracted naked driver folder
5. Cannot install - hash not present issue!
6. Found this how-to on installing unsigned drivers: http://dhakshinamoorthy.wordpress.com/2012/05/14/installing-an-unsigned-driver-in-windows-8-x64/
- Cannot find the control panel advanced startup menu!!!
Found those that work! http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
Method 2: PC Settings
Swipe from the right to open the charms bar.
Tip: If you have a keyboard, use WIN+I and then skip to Step 3.
Tap or click on Settings.
Tap or click on Change PC settings at the bottom of the charms bar.
Choose Update and recovery from the list of options on the left of the PC settings window.
Note: Prior to Windows 8.1, choose General instead and then skip to Step 6.
Choose Recovery.
Locate Advanced startup, at the bottom of the list of options on your right.
Tap or click on Restart now.
Wait through the Please wait message until Advanced Startup Options opens.
After reboot, I could install the Asus Transformer APX interface.
downloaded easy flasher: http://yarr.ntg.cx/pub/EasyFlasher-0.8.3b-STABLE.zip
extracted and started with SBK1
Choose TWRP 2.2.1 and clicked flash
Tablet need to be in APX mode (power + volume up)
click flash and ok
Saw this on easy flash:
Running Wheelie..
>Tablet is now ready for Nvflash
Flashing twrp.SOS
>Finished, now reboot into recovery!
Saw this on tablet:
Entering NvFlash recovery mode / Nv3p Server
Chip Uid: xxxx
!!! phone update success !!!
!!! phone update success !!!
Copying those file to root of flash drive
- KatKiss-4.4.4_032b.zip
- gapps-KatKiss-4.4.4_20140720.zip
- fsync_on.zip
3) Booted to TWRP Recovery
1. Pressing and holding Power & Volume Down
2. when white text appears at the top of the screen, then quickly hit Volume Up once
Now we see the TWRP!
4) Goto the WIPE menu, and wipe everything apart from External Storage (This will 100% wipe your TF, so if you have anything you want to keep, back it up, you can also make a Nandroid backup inside of TWRP, so make sure your MicroSD Card has enough room if you choose that)
- cache
- Dalvik cache
- Factory reset
- System
- Internal storage
- Format data
FAILED!
Unable to format data
5) Once everything is wiped, goto the INSTALL menu and install KatKiss ROM you copied to the MicroSD Card (Might have to select External from the INSTALL menu to navigate to the MicroSD Card)
- Choose katkiss rom
KatKiss-4.4.4_032b.zip
- clicked home
6) When the ROM says it is completed the install, go back to the INSTALL menu and install the GAPPS you also copied to the MicroSD Card
- gapps-KatKiss-4.4.4_20140720.zip
- Home
7) Also installed fsync_on.zip
- This is optional to have more speed, but can cause data loss if tablet reboot
8) WIPE Cache and Dalvik Cache
9) Reboot - System
- Should see the new OS start - with the dog and colored circles!
10) After a short minute... you will get the welcome and setup screen
- Do standard setup!
Tablet is up and running... NICE!
Thanks a LOT!
Will now re-install my stuff and test... will keep you posted.
Do this detailed how-to exist somewhere?

CRAP!!! The main reason I updated this tablet was in the hopes to fix the twitter issue... that is, when trying to post a new tweet, the app crash and restart...
SAME issue!
Any tips on this one would be wonderful.

It's easy.
First root it. Rooting has a few basic common steps. just get the files right.
Then install the rom in recovery!
Voila!

SimonFiliatrault said:
ok here's the detail steps I did...
1) I have a TF101, B60... S/N, thus SBK1 (what ever that means!)
2) Using this thread: http://forum.xda-developers.com/showthread.php?t=1688012
- Need APX Drivers: http://forum.xda-developers.com/showthread.php?t=1514942
Found those instructions that partially work:
http://forum.xda-developers.com/showthread.php?t=1514942&page=4
Search in the start menu for Device Manager and open it.
Plug in your tablet via USB while in APX mode (hold power button and volume (+) until the screen turns off).
The driver should try to automatically install off the tablet upon plugging it in to your computer.
If it fails to install, you will have an "Unknown Devices" section in Device Manager.
Right click on Unknown Devices and hit update driver.
Then hit manually install driver. Point the file browser to the root folder of the extracted package that you downloaded.
For clarification: You downloaded the zip in the OP called Universal_Naked_Driver_0.72.zip.
When you extract it, you should get something like Universal Naked Driver 0.72 or something like that.
Point that file browser to the newly extracted folder, NOT the subfolders.
If you point it to the amd64 or the i386 subfolders it will not work. Hope this helps you out!
That is partly true... here's what I did:
1. power button + volume up
2. device manager showed "other devices" - APX
3. right-click APX and update driver
4. point to extracted naked driver folder
5. Cannot install - hash not present issue!
6. Found this how-to on installing unsigned drivers: http://dhakshinamoorthy.wordpress.com/2012/05/14/installing-an-unsigned-driver-in-windows-8-x64/
- Cannot find the control panel advanced startup menu!!!
Found those that work! http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
Method 2: PC Settings
Swipe from the right to open the charms bar.
Tip: If you have a keyboard, use WIN+I and then skip to Step 3.
Tap or click on Settings.
Tap or click on Change PC settings at the bottom of the charms bar.
Choose Update and recovery from the list of options on the left of the PC settings window.
Note: Prior to Windows 8.1, choose General instead and then skip to Step 6.
Choose Recovery.
Locate Advanced startup, at the bottom of the list of options on your right.
Tap or click on Restart now.
Wait through the Please wait message until Advanced Startup Options opens.
After reboot, I could install the Asus Transformer APX interface.
downloaded easy flasher: http://yarr.ntg.cx/pub/EasyFlasher-0.8.3b-STABLE.zip
extracted and started with SBK1
Choose TWRP 2.2.1 and clicked flash
Tablet need to be in APX mode (power + volume up)
click flash and ok
Saw this on easy flash:
Running Wheelie..
>Tablet is now ready for Nvflash
Flashing twrp.SOS
>Finished, now reboot into recovery!
Saw this on tablet:
Entering NvFlash recovery mode / Nv3p Server
Chip Uid: xxxx
!!! phone update success !!!
!!! phone update success !!!
Copying those file to root of flash drive
- KatKiss-4.4.4_032b.zip
- gapps-KatKiss-4.4.4_20140720.zip
- fsync_on.zip
3) Booted to TWRP Recovery
1. Pressing and holding Power & Volume Down
2. when white text appears at the top of the screen, then quickly hit Volume Up once
Now we see the TWRP!
4) Goto the WIPE menu, and wipe everything apart from External Storage (This will 100% wipe your TF, so if you have anything you want to keep, back it up, you can also make a Nandroid backup inside of TWRP, so make sure your MicroSD Card has enough room if you choose that)
- cache
- Dalvik cache
- Factory reset
- System
- Internal storage
- Format data
FAILED!
Unable to format data
5) Once everything is wiped, goto the INSTALL menu and install KatKiss ROM you copied to the MicroSD Card (Might have to select External from the INSTALL menu to navigate to the MicroSD Card)
- Choose katkiss rom
KatKiss-4.4.4_032b.zip
- clicked home
6) When the ROM says it is completed the install, go back to the INSTALL menu and install the GAPPS you also copied to the MicroSD Card
- gapps-KatKiss-4.4.4_20140720.zip
- Home
7) Also installed fsync_on.zip
- This is optional to have more speed, but can cause data loss if tablet reboot
8) WIPE Cache and Dalvik Cache
9) Reboot - System
- Should see the new OS start - with the dog and colored circles!
10) After a short minute... you will get the welcome and setup screen
- Do standard setup!
Tablet is up and running... NICE!
Thanks a LOT!
Will now re-install my stuff and test... will keep you posted.
Do this detailed how-to exist somewhere?
Click to expand...
Click to collapse
I am essentially trying to do this although I have a C20 so I use SBK2 in Easy Flash. However, after I do my wipes, then go to flash my rom, I get an error message that it can't open the zip file What is strange is that I have done this before and have had KK installed on my tablet.

706
Razor64 said:
It's easy.
First root it. Rooting has a few basic common steps. just get the files right.
Then install the rom in recovery!
Voila!
Click to expand...
Click to collapse
Unsure what you are referring to?
1) Rooting the TF101
2) Fixing Twitter issue
As you see in the thread, I have successfully installed 4.4.4 KatKiss.

barkeater said:
I am essentially trying to do this although I have a C20 so I use SBK2 in Easy Flash. However, after I do my wipes, then go to flash my rom, I get an error message that it can't open the zip file What is strange is that I have done this before and have had KK installed on my tablet.
Click to expand...
Click to collapse
Did you make sure the zip on the flash drive are ok? Did you try to open them on a PC?

Found a solution for twitter! Simply installed which is better! TWEEDLE

Razor64 said:
It's easy.
First root it. Rooting has a few basic common steps. just get the files right.
Then install the rom in recovery!
Voila!
Click to expand...
Click to collapse
KatKiss is already rooted!
SimonFiliatrault said:
Found a solution for twitter! Simply installed which is better! TWEEDLE
Click to expand...
Click to collapse
Great pleased you managed to get it working in the end, you can now update TWRP to either the latest official 2.3.2.3 or the unofficial which has been taken over by another member, that's possibly why you ended up with the DATA failing to wipe
Twitter works ok for me, but there are 2 different types of KatKiss, there is the normal one which has a speed increase, and the NonLinaro version which has much better compatibility with apps
Its possible twitter is not liking the Linaro version (Normal one)
Anyway, you are set to flash whichever ROMs you like now you have TWRP, but Id advise updating to 2.3.2.3 to avoid issues, that's the version Ive been running since it was released
Oh and SBK1 and 2 mean, Secure Boot Key, SBK1 was leaked and therefore very easy to flash recovery and other stuff to that required the key, SBK2 did not leak, so devs had to find workarounds in order to flash recovery

Wow Simon.
Already so much.
By the way you sound like a pro already
Now just follow what *detection* says.
That Rom is fast and smooth.
Verstuurd vanaf mijn SM-G900F met Tapatalk

I now want to update again since I have some issue with wifi disconnecting and would like to have original Twitter app working.
So here's a couple of questions:
1. TWRP... before I used EasyFlasher that have TWRP 2.2.1
- I did not find easy flasher with TWRP 2.3.2.3 what do you recommend to use to update TWRP? Link please.
2. You said Twitter work for you and you installed the NonLinaro... right?
- I would be using this link: http://forum.xda-developers.com/showthread.php?t=2592890
That's good?
Any other tips, new version since you last post?
Thanks,
Simon

SimonFiliatrault said:
I now want to update again since I have some issue with wifi disconnecting and would like to have original Twitter app working.
So here's a couple of questions:
1. TWRP... before I used EasyFlasher that have TWRP 2.2.1
- I did not find easy flasher with TWRP 2.3.2.3 what do you recommend to use to update TWRP? Link please.
2. You said Twitter work for you and you installed the NonLinaro... right?
- I would be using this link: http://forum.xda-developers.com/showthread.php?t=2592890
That's good?
Any other tips, new version since you last post?
Thanks,
Simon
Click to expand...
Click to collapse
I can help you with 2.3.2.3 TWRP
Code:
https://mega.co.nz/#!0MFjWR5L!Xsf2b83h54I97z5Zsp_1PUn6mDHi6itZIc2GGoFkAeI
This Easyflasher has 2.3.2.3 updated inside (Credit to Frederuco)

*Detection* said:
I can help you with 2.3.2.3 TWRP
Code:
https://mega.co.nz/#!0MFjWR5L!Xsf2b83h54I97z5Zsp_1PUn6mDHi6itZIc2GGoFkAeI
This Easyflasher has 2.3.2.3 updated inside (Credit to Frederuco)
Click to expand...
Click to collapse
Ok... Downloaded this new version and ran it:
Running Wheelie..
>Tablet is now ready for Nvflash
Flashing twrp.SOS
>Finished, now reboot into recovery!
on the tablet, I see the !!!!! phone update success!!!! 2 time
Trying now to get in "recovery mode"...
Tried simple reboot in recovery from KatKiss, does not work.
Ideas?

SimonFiliatrault said:
Ok... Downloaded this new version and ran it:
Running Wheelie..
>Tablet is now ready for Nvflash
Flashing twrp.SOS
>Finished, now reboot into recovery!
on the tablet, I see the !!!!! phone update success!!!! 2 time
Trying now to get in "recovery mode"...
Tried simple reboot in recovery from KatKiss, does not work.
Ideas?
Click to expand...
Click to collapse
Did you reboot fully into KK before trying to get into recovery after flashing 2.3.2.3?
You need flash 2.3.2.3 > reboot fully into KK to complete the install > then reboot into recovery
Also you can try powering off the TF, then hold Vol down and Power until you see the white text at the top of the screen, then release all buttons and quickly tap Vol up to enter recovery

*Detection* said:
Did you reboot fully into KK before trying to get into recovery after flashing 2.3.2.3?
You need flash 2.3.2.3 > reboot fully into KK to complete the install > then reboot into recovery
Also you can try powering off the TF, then hold Vol down and Power until you see the white text at the top of the screen, then release all buttons and quickly tap Vol up to enter recovery
Click to expand...
Click to collapse
After first attempt, yes I entered KK then did reboot in recovery and did not work.
I have tried many time to do power with vol down and vol up... I see "cold-booting linux"... then KK, not recovery mode
I started another thread for this, not sure where the best place to discuss this is?

[ROOT][RECOVERY]Asus Zenfone Max ZC550KL Qualcomm Snapdragon 615 MSM8939

Guide for rooting and Twrp installation for Zenfone max ZC550KL 615 MSM 8939 :
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
FILES NEEDED
DRIVERS\TOOLS
a. adb setup; http://www.mediafire.com/file/jsbx6isfpgle319/adb-setup-1.4.3.exe
b. Android usb drivers ;http://www.mediafire.com/file/57fzehmcfqk0y7t/ASUS_Android_USB_drivers_for_Windows_20150212.zip
c.minimal adb and fastboot : http://www.mediafire.com/file/0h36wb7e8aoimvb/minimal_adb_fastboot_v1.3.1_setup.exe
d. Asus bootloader unlock tool for 8939 device : http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
TWRP\ROOT FILES
e. custom recovery image file (Twrp) :
https://www.mediafire.com/file/1kyk0q3b99kcrue/Twrp_3.0.2.img
f. SuperSU file (root) : http://www.mediafire.com/file/dchiph3qkml3u8g/PRO-SuperSU-v2.67.zip
STEP BY STEP GUIDE
1. Download and install adb and Android usb drivers if you don't have them already installed, otherwise, you can skip
2. Download and install minimal adb and fastboot and put icon on desktop
3. Download the Asus bootloader unlock tool .apk file to your device and install like an application in order to unlock bootloader(follow on-screen messages)
4. Boot device into CSC MODE(fastboot\bootloader) and connect to PC via usb cable. (To boot into CSC MODE , press and HOLD "volume up key+power key")
5. open minmal adb and fastboot and enter the following commands:
Code:
[COLOR="Red"]fastboot devices[/COLOR]
hit enter on keyboard and the serial number of your device SHOULD show in minimal adb window, if it does'nt then you've not installed your Android usb drivers correctly !
Code:
[COLOR="Red"]fastboot flash recovery[/COLOR]
after this command press the SPACE KEY ON KEYBOARD AND DRAG THE "CUSTOM RECOVERY IMAGE FILE TO THE MINIMAL ADB WINDOW then hit the enter key on your keyboard and Twrp will be flashed .
IMPORTANT !!
After flashing the TWRP file, you should boot directly into recovery by holding VOLUME DOWN+POWER BUTTON do not allow device to boot into home screen at first boot, otherwise stock recovery will be restored !!!
6. After booting into TWRP , FLASH THE ROOT FILE IMMEDIATELY !
WARNING !
if you don't flash the root file once in twrp, you might encounter a bootloop!
some users report a password prompt while in Twrp, just press "cancel" then go to twrp home screen , WIPE-FORMAT DATA, after formatting data , go back to twrp home screen -REBOOT-RECOVERY , after that flash the root file (make sure your root file is on an external sd card .

Just followed instructions word by word and successfully rooted my Asus Max SD 615 !
Thanks !:good:

Plez upload video..
Please upload video for how to root,twrp and adb installing..because i m a android beginner.

Nandha2335 said:
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Click to expand...
Click to collapse
Well i guess if you follow it step by step there won't be any problem.If you get stuck at some point just comment here.And installing adb is just like the normal installation of any setup files in windows.Regarding the flashing of twrp there is nothing much to do than the steps mentioned above.If you still need a video go for this.https://youtu.be/kmq2Eyzl3wA NOTE:This video makes use of files for the sd410 model,so don't use the files in that video.Get the files from this post.This video can make you familiarize the process,but steps mentioned here is slightly different.

Nandha
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..

Nandha
Thank u so much bro ..i m following as per u r procedure now my mobile was rooted ...

Nandha2335 said:
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Click to expand...
Click to collapse
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).

Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193

jide1 said:
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
Click to expand...
Click to collapse
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Bro how to change notification panel ..and status bar

Nandha2335 said:
Miui 8 rom properly working or not
don't ask me, i didn't post any rom here, ask him https://forum.xda-developers.com/showthread.php?p=73339833
Click to expand...
Click to collapse

Nandha2335 said:
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Bro how to change notification panel ..and status bar
Click to expand...
Click to collapse
Try using gravity box after installing xposed framework.There a lot of graphical tweaks in gravity box.

Internal Storage Files Missing
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.

Place the root file on an external sd card.

jide1 said:
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Click to expand...
Click to collapse
Thank for your fast reply. By following your steps, I was successful in rooting the phone but when rebooting back to home screen, the black screen's still there.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
I guess you have copied the super su file to external sd card.Formatting data as mentioned by jide1 did remove the encryption for me.If it doesn't work do advanced wipe with only the data,cache and dalvik cache boxes checked.Note:don't check any other box.Then reboot into twrp.Go to mount in twrp and see that your external sd is mounted.Now access the external sd card in install option and you will find the files of super su.

How to get into twrp recovery?
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost

6goyal said:
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
Click to expand...
Click to collapse
Flash twrp again ,disconnect usb cable from pc, then press and HOLD "volume down" AND "power button" when device vibrates, RELEASE "power button" WHILE still holding "volume down" , that should do the job.

Need stock boot.img
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.

Volker802 said:
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Click to expand...
Click to collapse
Download the official firmware from Asus website and unpack the zip file, and you'll see the boot.img file there.

Beanstalk question .

Hi everybody, I'm new here and I hope my question does not sound too stupid . My grandson brought me his Galaxy tab 2 GT-P5113 and it is a rooted device . It has android version 4.2.2 installed and it will not update because the device has been modified appears . He does not have the original data cable just a cable that will charge . Here is the question. Do I need to hook up to a PC to install Beanstalk rom or can it be installed off of the SD card ? Any help and install procedure would be greatly appreciated . Thank you .

As long as it has a custom recovery installed such as TWRP you can download and flash any rom that you like without a pc

twfs said:
As long as it has a custom recovery installed such as TWRP you can download and flash any rom that you like without a pc
Click to expand...
Click to collapse
Can you explain ? Thank you.

jtag2014 said:
Can you explain ? Thank you.
Click to expand...
Click to collapse
Search for twrp recovery and download and install the correct version for your device (if it's not already installed). Then install the rom using twrp (no pc needed for this).

Greetings,
THIS IS A LONG(will take upto 1 hour of your time) BUT EASY PROCESS. SO DON'T WORRY.
After reading your question I understood that you want to install beanstalk ROM on your device.
I suggest you NOT to install beanstalk as it is discontinued and not updated ROM.
To install the ROM you should have a custom recovery.
I will proceed you as following :
1. Installing a custom recovery.
- Download Flashify from play store.
- Download this recovery from here :- https://androidfilehost.com/?fid=962021903579495495
- Open Flashify and open the flash(or install tab), it must be opened by default anyways.
- Select 'Flash Custom Recovery' and navigate to the file downloaded.
- After you click install, you device will reboot.
- Now you have a custom recovery installed.
2. Downloading the ROM and correct gapps
I suggest you to install this ROM(as it is updated and supported at the moment) :-
- Download the ROM. :- https://androidfilehost.com/?fid=746010030569950580
- Open this website :- https://opengapps.org
- Select ARM, then 7.1, then Pico and download the GApps(google apps, play store and all).
3. Flashing
- Power off your device(make sure you have atleast 30% battery).
- Press Volume Up + Power button until your device vibrates.
- If you get some sort of message, just click "Keep read only".
- Click wipe.
- Click advanced.
- Select : Data, Dalvik/ART, System and cache.
- Swipe the slider to right and wait until you see " Done in the dialog box"
- Press the home button
- Click Install
- Locate the ROM first and select it and swipe the slide towards right again.
- Once you see "script succeeded result = 1.000000" press home button.
- Click install again.
- Locate to the GApps.
- Install it just as you did with ROM above.
- After installation click home button.
- Click wipe and select : Cache, Data and Dalvik/ART. DO NOT CLICK SYSTEM.
- Click the home button.
- Click reboot.
- Click system.
- Done!!
IMPORTANT :- The first boot will take around 5-15 minutes, this is normal. After your device boots, please connect it to your charger and keep it aside for 5 minutes and then set it up.
Thank you, if you have any problem or doubt just write me back.

I have downloaded everything you suggested and will try and install everything later . Thank you again for the instructions .