My Milestone 2 is totally dead now...the screen is totally black or no display...initially it was on bootloader mode and windows do recognized the Motorola interface..but now its not even getting recognized....
Is there any way to make the M2 to bootloader mode or is there any way to recover it....?
Hi i had the same issue, but i found that only the display was not correct powered. Wipe data and cache in stock recovery and pull battery. Then start in bootloader mode and connect to pc rsd lite says usb connected, you can flash even you dont see anything from bootloader screen.
Gesendet von meinem A953 mit Tapatalk 2
M2/4.2.2 said:
Hi i had the same issue, but i found that only the display was not correct powered. Wipe data and cache in stock recovery and pull battery. Then start in bootloader mode and connect to pc rsd lite says usb connected, you can flash even you dont see anything from bootloader screen.
Gesendet von meinem A953 mit Tapatalk 2
Click to expand...
Click to collapse
If the display is not working, how you wiped data in stock recovery ? Now my phone is not getting recognized by pc...
harisit2005 said:
My Milestone 2 is totally dead now...the screen is totally black or no display...initially it was on bootloader mode and windows do recognized the Motorola interface..but now its not even getting recognized....
Is there any way to make the M2 to bootloader mode or is there any way to recover it....?
Click to expand...
Click to collapse
If its not recognized but detected I think would mean you need correct drivers. When my phone failed it was also not recognized but I heard windows noise like when connecting any device so installed old drivers and it was detected.
harisit2005 said:
My Milestone 2 is totally dead now...the screen is totally black or no display...initially it was on bootloader mode and windows do recognized the Motorola interface..but now its not even getting recognized....
Is there any way to make the M2 to bootloader mode or is there any way to recover it....?
Click to expand...
Click to collapse
I also had this problem. I bought an external battery charger and charged the battery in it, then put it back in the device.
The problem is, when the battery is empty, it won't charge in the device and RSD Lite won't work.
My advice is to get the battery charged somewhere and put it in bootloader mode then flash it.
I don't remember very well but I had the same issue when I make mistake and flashed 2.3.6 and after that trying to put 2.3.4.
U can try flashing tje one of 2.3.6 (vivo brasil etc), but after that u are stuck on bl 4 roms.
Does anyone have UK MILS2_U6_2.2.16 version sbf....i need exactly this version..if someone have this please do upload it somewhere..
harisit2005 said:
Does anyone have UK MILS2_U6_2.2.16 version sbf....i need exactly this version..if someone have this please do upload it somewhere..
Click to expand...
Click to collapse
If it helps you, I can upload MILS2_U6_2.4.24 DACH. It is German Froyo 2.2.2.
It is almost same as UK except for keyboard layout.
---UFO--- said:
If it helps you, I can upload MILS2_U6_2.4.24 DACH. It is German Froyo 2.2.2.
It is almost same as UK except for keyboard layout.
Click to expand...
Click to collapse
Thanks , i got it...and somehow i restored the rom...
DJPatriX said:
I don't remember very well but I had the same issue when I make mistake and flashed 2.3.6 and after that trying to put 2.3.4.
U can try flashing tje one of 2.3.6 (vivo brasil etc), but after that u are stuck on bl 4 roms.
Click to expand...
Click to collapse
Yes, exactly this happened to me. I was not able to enter the bootloader mode, the phone didn't visually react on any keys including the PWR... Looked like a brick. But it wasn't!
As a last chance I started sbf_flash with proper SBF file, waited for the "Waiting for phone" message, inserted the battery to the MoMi2 and without pressing anything, just connected it. After about 5 seconds, sbf_flash properly detected the phone, initiated and executed the RAM loader, the display revived and showed the same as with regular flashing... and that's the happy end .
Related
I've searched the whole sight and tried a bunch of so called fixes and still when i plug in my atrix 2 in boot mode (only it boot mode it does this) all i hear is instead of the dehdo that lets u know its connected i hear duhduhduh and RSD doesnt detect my device... im trying to fxz to 2.3.5 then ota upto ICS then root but i cant do any of these because of this please help.
greatanomaly said:
I've searched the whole sight and tried a bunch of so called fixes and still when i plug in my atrix 2 in boot mode (only it boot mode it does this) all i hear is instead of the dehdo that lets u know its connected i hear duhduhduh and RSD doesnt detect my device... im trying to fxz to 2.3.5 then ota upto ICS then root but i cant do any of these because of this please help.
Click to expand...
Click to collapse
First and foremost, this belongs in the q&a section. Is your phone an MB865, an ME865, is it AT&T branded? Have you tried uninstalling then reinstalling the Motorola drivers on your PC? Tried a different USB port and/or another PC? Can you give a little more information? Awesome sound effects, by the way.lol
Sent from this thing.
1BadWolf said:
First and foremost, this belongs in the q&a section. Is your phone an MB865, an ME865, is it AT&T branded? Have you tried uninstalling then reinstalling the Motorola drivers on your PC? Tried a different USB port and/or another PC? Can you give a little more information? Awesome sound effects, by the way.lol
Sent from this thing.
Click to expand...
Click to collapse
thank u lol but im sure u can imagnine the sound an...
AT&T
MB865
and i do believe i said ive tried nearly everything that is listed on this site well other sites to...
I dont need special files for my special model phone or the fact that its at&t but if that information helps u make it connect to my pc like it does when its not in fastboot then there ya go and btw to the Q/A section they can move it...
greatanomaly said:
thank u lol but im sure u can imagnine the sound an...
AT&T
MB865
and i do believe i said ive tried nearly everything that is listed on this site well other sites to...
I dont need special files for my special model phone or the fact that its at&t but if that information helps u make it connect to my pc like it does when its not in fastboot then there ya go and btw to the Q/A section they can move it...
Click to expand...
Click to collapse
Yeah, I was kidding. This site can be too serious at times. I know you said you tried everything, but a lot of people say that and it isn't always true, especially when they ask questions on the same day they became a member. I wasn't trying to offend you or insinuate anything. I asked if you had an AT&T branded phone because I was curious as to why you wanted to flash to 2.3.5 then ota to 2.3.6 then ota again to 4.0.4 instead of using this:
http://forum.xda-developers.com/showthread.php?t=1961310
to go straight to 4.0.4?
So your PC isn't detecting your phone, but ONLY when in fastboot mode, correct? Is the phone detecting the PC? By that I mean, on my phone when I boot into fastboot mode, at first it says:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Connect USB
Data Cable
Then when I connect it to the PC it changes to:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Transfer Mode:
USB Connected
Are you at least getting that?
Sent from this thing.
stuck on boot logo
1BadWolf said:
Yeah, I was kidding. This site can be too serious at times. I know you said you tried everything, but a lot of people say that and it isn't always true, especially when they ask questions on the same day they became a member. I wasn't trying to offend you or insinuate anything. I asked if you had an AT&T branded phone because I was curious as to why you wanted to flash to 2.3.5 then ota to 2.3.6 then ota again to 4.0.4 instead of using this:
http://forum.xda-developers.com/showthread.php?t=1961310
to go straight to 4.0.4?
So your PC isn't detecting your phone, but ONLY when in fastboot mode, correct? Is the phone detecting the PC? By that I mean, on my phone when I boot into fastboot mode, at first it says:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Connect USB
Data Cable
Then when I connect it to the PC it changes to:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Transfer Mode:
USB Connected
Are you at least getting that?
Sent from this thing.
Click to expand...
Click to collapse
no sir ny fone is not showing this
it still says
Connect Usb
data cable
i stuck while i was on jbleak 4.1.2 and through SD card i flashed CM 10.1
once it worked but now it stucked on the boot logo ... it appears and gone ... and then shows black screen.
even in recovery when i tried to reinstall same zip file of CM10.1 it failed on signature verification.
please help me sir help me..!!
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Gr8mobiPro said:
no sir ny fone is not showing this
it still says
Connect Usb
data cable
i stuck while i was on jbleak 4.1.2 and through SD card i flashed CM 10.1
once it worked but now it stucked on the boot logo ... it appears and gone ... and then shows black screen.
even in recovery when i tried to reinstall same zip file of CM10.1 it failed on signature verification.
please help me sir help me..!!
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Chill man..nothing to worry about..please install motorola drivers..it should work.
its still not working
nishant203 said:
Chill man..nothing to worry about..please install motorola drivers..it should work.
Click to expand...
Click to collapse
wot motorola driver ..?? i have installed moto device manager and it is not showing any thing connected.. because it remain in boot mode..:crying::crying::crying::crying::crying::crying::crying:
Use Virtual PC
I still have the same issue. I have installed Windows 7 on VM Ware workstation i.e virtual desktop and then followed the below steps :-
-Reboot your Virtual PC
-Install Motorola drivers.
-Reboot your computer
-Install RSD Lite
-Reboot your computer
-Boot your phone into Fastboot mode
-Connect your phone to your computer using a high-quality (preferably OEM) cable.
-Let your PC install any necessary drivers. When it finishes it should tell you that the device "Fastboot Edison S" is ready for use.
-Turn your phone off, disconnect the cable
-Reboot your computer
-Boot your phone back into Fastboot mode
-Wait a couple seconds then connect your phone to your computer
-Wait a couple more seconds, then look at the bottom text that's displayed on your phone. It should say
This means that your phone is connected to your computer.
-Open up RSD Lite
-Wait a couple seconds. At the top of the list should be your phone (under model it should say "Fastboot Edison S")
-If you've done all this and everything has worked out for you, flash the fxz! Make sure to follow the instructions in the noob thread as specifically as possible
Gr8mobiPro said:
wot motorola driver ..?? i have installed moto device manager and it is not showing any thing connected.. because it remain in boot mode..:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
This seems to be happening more lately. it IS a driver issue of some sort, that is for sure. I would just use one of the scripts, or moto-fastboot manually. they do the same thing as rsd but through command line either with your own typing, or a .bat script.
This may also work better in linux, so you can try downloading a live cd/usb of ubuntu and seeing if it is recognized. no need for drives with linux, just download one of the scripts that includes the moto-fastboot utility. Let me know if you need more help.
same issue
i am having the same issue with my at&t atrix 2. it is soft bricked due to an upgrade from gb to jbleak. ap fastboot flash mode (s) oa.65 battery ok ok to program connect usb data cable same message i have installed different motorola usb driver versions. i have also soldered the 4 pin to the 1 red+5v factory usb cable
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNE6DkvEZi41YPAYKVPqH_AlA4f4cQ
but still my pc says unable to recognize usb device. i dnt what to do any more. im in mexico and purchasing a new phone is very expensive i need help is there something any one can do i am sure my device is not completely bricked i just cant get the mofokin pc to recognize the mofokin phone in fastboot
hello..
so i bought a nexus s i9020t from a guy for cheap price...he told me he was updating to ics and someting went wrong and now his device wont boot up...
i can enter fastboot mode with vol+ and power button...but when i try to unlock bootloader it says failed(ive done this many times and with proper drivers and method)..and i cant flash any custom recovery or stock rom from fastboot(also im guessing usb debugging was off).. i also tried adamoutlers resurrection tool...
but it says
sbl injection failure
failed to find device
and that fails to put my fone into download mode..
im stuck and cant run my fone...any kind of help is appreciated..
as you were writing me by pm, i answering here....
#
unfortunatelly, i don't know how to fix it.
i am not familiar with adam outler's resurection tool, maybe a usb jig is working in another way, to bring you into dl mode
Doh. Seems you PMed all RDs around?
How about not unlocking it and just flashing stock Google ROM?
update: when i hold both volume buttons and insert the usb cable..odin recognises the device but the device does not show download mode...instead it shows unlock bootloader screen with no, yes or no options..and when when i flash a package with odin it also says failed...
and rebellos-- "how about not unlocking it and flashing stock google rom"......can u give me pointers how to do that..though i think i know..but nothing is leading me to anything fruitful
plz help me get my fone back..
need help..still in the same position...
Read this: http://forum.xda-developers.com/showthread.php?t=1572307
Sent from my Nexus S using Tapatalk 2
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.
Hi,
I have the honor 8 FRD-Al00 (chinese) only 2 days .
The phone ask to update the emui, and i did but now the phone is stock in erecovery mode when ask to download the latest version and recovery via wifi but fail every time.
I try to reset to fabric settings but don´t work.
i don´t know what happen and i don´t know what to do anymore.
Please anyone can help me?
Thanks
Rommco05 said:
Where you buy phone? You have warranty?
Click to expand...
Click to collapse
is a gift, but i know is from gearbest but if i can resolve the problem here is better than send the phone to chine and all the process.
Rommco05 said:
hm another bad situation. For your model isn't (or I don't know where) full firmware which can be useful. Try this, install HiSuite to PC and here is one section to repair phone, follow instruction in this program.
edit: try reset your wifi setting, setup for short without possword and try again download via eRecovery latest version
Click to expand...
Click to collapse
i have try the two methods but don´t work. via wifi fails everytime. via hisuite the recovey said the phone is not supported
Rommco05 said:
Fastboot recognized phone? If yes which Android you have last one? You can try unlock bootloader and flash custom recovery TWRP and after custom rom, thats maybe can help but warranty will be gone after amd I really don't know what happened after unlocking bootloader
Click to expand...
Click to collapse
you want to know if i can enter in menu fastboot? power and volume down key? yes and said Phone locked Frp lock. the android in the begin are 7.0 but after this happen i try to reset to fabric so now i don´t know.
Rommco05 said:
FRP lock and in HiSuite isn't option rollback?
edit: check this http://cn.club.vmall.com/thread-11316965-1-1.html
Click to expand...
Click to collapse
in hisuite the only option is system recovery but the phone is not supported
Rommco05 said:
Sorry man I think you must use warranty or some other member have more info like me
Click to expand...
Click to collapse
Thanks for try to help me.
If anyone else knows how to help me please let me know.
And i continue to investigate and if i know a solution i post here for others with the same problem.
Do you have unlocked bootloadrr
venugopalu007 said:
Do you have unlocked bootloadrr
Click to expand...
Click to collapse
no, i have made anything to the phone
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Rommco05 said:
ufff, factory reset in stock recovery? Or try again repeat setup
edit: how you fix boot to ROM?
Click to expand...
Click to collapse
i made the factory reset but the phone is stuck in startup. don´t exit the startup
i have some firmwares for this and i try lol if i can make this to work right i make here my all processe and links for everyone. but know i'm stuck on this
Rommco05 said:
It is Nougat or Marshmallow?
Click to expand...
Click to collapse
Marshmallow
Rommco05 said:
Again flash ROM via dload
Click to expand...
Click to collapse
i made but is the same
MagicMinds said:
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Click to expand...
Click to collapse
hold a moment , do you use VOLTE based Sim??
Honor 8 FRD-AL00 Briked
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
bugsbunny69 said:
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
Click to expand...
Click to collapse
Are you able to flash twrp?
Unfortunately, I can not get in any way to restart with recovery from SDcard but it does not recognize any firmware stops at 5% with the following message (software install failed).
thank you!
Rommco05 said:
U can boot to fastboot, if yes which status have FRP and PHONE are both unlocked?
Click to expand...
Click to collapse
No! I have already explained it does not enter fastboot and is not recognized by the PC, the only way is sd card but I tried various firmware stops at 5% even seza sd card.
When it enters sdcard recovery mode and connects to the PC it is reconnected in this way as a CDROM (linux file-cd gadget usb device).
Thank you!
Rommco05 said:
I don't know what next, leave him again discharged because u need fastboot and in recognise phone, if u can't boot to fastboot u can't do anything this a serious problem
Click to expand...
Click to collapse
I know I just have to try to give it back, hoping it's a guarantee with the Chinese people, I've already made a complaint that after two days the smartphone gave me problems, but the support office opens on 28/8.
Thanks for everything!
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
I need help ;-;
gagi92bb said:
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
Click to expand...
Click to collapse
I have a honor 8 al00, i can't restore ;-;
can somebody provide me files of firehose and patch file for my device
gagan.gowdaaa said:
can somebody provide me files of firehose and patch file for my device
Click to expand...
Click to collapse
could you provide details about how your device is hard bricked? Are you able to boot into download mode?
barryallen3038 said:
could you provide details about how your device is hard bricked? Are you able to boot into download mode?
Click to expand...
Click to collapse
i just updated from ray os to pixel, after booting up and using for some time my device started acting wierdly and i restarted it,from that time my phone is not responding, and cant even go to the download mode, its in a dead state
gagan.gowdaaa said:
i just updated from ray os to pixel, after booting up and using for some time my device started acting wierdly and i restarted it,from that time my phone is not responding, and cant even go to the download mode, its in a dead state
Click to expand...
Click to collapse
aah, you should have installed stock before moving to pixel...
Are you sure you tried everything? Could you send a video of what happens when you power it on? Also, does it accept charge when you connect it to the charger?
barryallen3038 said:
aah, you should have installed stock before moving to pixel...
Are you sure you tried everything? Could you send a video of what happens when you power it on? Also, does it accept charge when you connect it to the charger?
Click to expand...
Click to collapse
i tried to boot it up at every possible way but it wont ,it accepts charging also ,i got to know that when i put my phone with the power bank, when i try to turn on it wont respond,it doesnt even vibrate also , so i tried to put it to edl mode and it worked and it got connected to my pc by qualcom driver
gagan.gowdaaa said:
i tried to boot it up at every possible way but it wont ,it accepts charging also ,i got to know that when i put my phone with the power bank, when i try to turn on it wont respond,it doesnt even vibrate also , so i tried to put it to edl mode and it worked and it got connected to my pc by qualcom driver
Click to expand...
Click to collapse
That's great! You should be able to force flash the stock firmware through this mode.
This video might help..
barryallen3038 said:
That's great! You should be able to force flash the stock firmware through this mode.
This video might help..
Click to expand...
Click to collapse
thank you so much for helping me sir ;0
gagan.gowdaaa said:
thank you so much for helping me sir ;0
Click to expand...
Click to collapse
No problem man. Did you manage to unbrick it?