Related
i cant believe i did this but i have a sprint tp2 and i accidentally install the wrong rom, i installed 1.8b_Sense_2.5_2012_Full, and after the update the phone wont turn on so i cant even do the bootloader. and hard reset either, nothing is responding. is there any way i can get out of this with a working phone?? would the people at sprint be able to help? and please no smart ass comments im really bummed out about this right now
It should be ok if you only install a gsm rom. If you installed a gsm unlocker than it is bricked. Just push the bootloader buttons with the phone off. If it doesn't go to bootloader it is bricked.
i installed the rom but i think the damn thing CAME with the radio unlocker inside the rom. i cant get into bootloader...
please help
If you can't get into bootloader and it wont turn on it is bricked.
Not to hijack the thread, but on the subject of bricking the phone...
I tried to install Hard SPL using SSPL Manual (downloaded from a link on ppcgeeks.com). I ran it from the phone, and the screen blanked as normal, but no USB device was detected after doing so and the manual Hard SPL would not work either.
I tried to reset and remove the battery. The phone will not turn on, will not enter boot loader mode, nothing! EXCEPT for one thing, when I plug in USB now, it is detected as a Qualcomm CDMA Technologies MSM. No driver though (Win 7 or Win XP).
Is there any way to recover from this?
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
ted2001 said:
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
Click to expand...
Click to collapse
Hi, I have the exact same issue as the member above. I tryed to go to the ftp site you reccomended, but can't download. Can you please help! I cant sleep or think of anything else. Can't believe I did that to my phone.
go here and then to touch pro 2 stock roms. ftp://up.ppcgeeks.com/
Thanks for the replies.
I can't load the stock ROM since the phone is not recognized by ActiveSync. While you can see it when you connect USB, it isn't actually usuable as there is no driver loaded for it. And many drivers I've tried for it do not work either.
I did try [to install the ROM] though just to make sure there was no magic going on behind the scenes, but no go.
EDIT: Grammer fix
I've searched the whole sight and tried a bunch of so called fixes and still when i plug in my atrix 2 in boot mode (only it boot mode it does this) all i hear is instead of the dehdo that lets u know its connected i hear duhduhduh and RSD doesnt detect my device... im trying to fxz to 2.3.5 then ota upto ICS then root but i cant do any of these because of this please help.
greatanomaly said:
I've searched the whole sight and tried a bunch of so called fixes and still when i plug in my atrix 2 in boot mode (only it boot mode it does this) all i hear is instead of the dehdo that lets u know its connected i hear duhduhduh and RSD doesnt detect my device... im trying to fxz to 2.3.5 then ota upto ICS then root but i cant do any of these because of this please help.
Click to expand...
Click to collapse
First and foremost, this belongs in the q&a section. Is your phone an MB865, an ME865, is it AT&T branded? Have you tried uninstalling then reinstalling the Motorola drivers on your PC? Tried a different USB port and/or another PC? Can you give a little more information? Awesome sound effects, by the way.lol
Sent from this thing.
1BadWolf said:
First and foremost, this belongs in the q&a section. Is your phone an MB865, an ME865, is it AT&T branded? Have you tried uninstalling then reinstalling the Motorola drivers on your PC? Tried a different USB port and/or another PC? Can you give a little more information? Awesome sound effects, by the way.lol
Sent from this thing.
Click to expand...
Click to collapse
thank u lol but im sure u can imagnine the sound an...
AT&T
MB865
and i do believe i said ive tried nearly everything that is listed on this site well other sites to...
I dont need special files for my special model phone or the fact that its at&t but if that information helps u make it connect to my pc like it does when its not in fastboot then there ya go and btw to the Q/A section they can move it...
greatanomaly said:
thank u lol but im sure u can imagnine the sound an...
AT&T
MB865
and i do believe i said ive tried nearly everything that is listed on this site well other sites to...
I dont need special files for my special model phone or the fact that its at&t but if that information helps u make it connect to my pc like it does when its not in fastboot then there ya go and btw to the Q/A section they can move it...
Click to expand...
Click to collapse
Yeah, I was kidding. This site can be too serious at times. I know you said you tried everything, but a lot of people say that and it isn't always true, especially when they ask questions on the same day they became a member. I wasn't trying to offend you or insinuate anything. I asked if you had an AT&T branded phone because I was curious as to why you wanted to flash to 2.3.5 then ota to 2.3.6 then ota again to 4.0.4 instead of using this:
http://forum.xda-developers.com/showthread.php?t=1961310
to go straight to 4.0.4?
So your PC isn't detecting your phone, but ONLY when in fastboot mode, correct? Is the phone detecting the PC? By that I mean, on my phone when I boot into fastboot mode, at first it says:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Connect USB
Data Cable
Then when I connect it to the PC it changes to:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Transfer Mode:
USB Connected
Are you at least getting that?
Sent from this thing.
stuck on boot logo
1BadWolf said:
Yeah, I was kidding. This site can be too serious at times. I know you said you tried everything, but a lot of people say that and it isn't always true, especially when they ask questions on the same day they became a member. I wasn't trying to offend you or insinuate anything. I asked if you had an AT&T branded phone because I was curious as to why you wanted to flash to 2.3.5 then ota to 2.3.6 then ota again to 4.0.4 instead of using this:
http://forum.xda-developers.com/showthread.php?t=1961310
to go straight to 4.0.4?
So your PC isn't detecting your phone, but ONLY when in fastboot mode, correct? Is the phone detecting the PC? By that I mean, on my phone when I boot into fastboot mode, at first it says:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Connect USB
Data Cable
Then when I connect it to the PC it changes to:
AP Fastboot Flash Mode (S)
0A.72
Battery OK
OK to Program
Transfer Mode:
USB Connected
Are you at least getting that?
Sent from this thing.
Click to expand...
Click to collapse
no sir ny fone is not showing this
it still says
Connect Usb
data cable
i stuck while i was on jbleak 4.1.2 and through SD card i flashed CM 10.1
once it worked but now it stucked on the boot logo ... it appears and gone ... and then shows black screen.
even in recovery when i tried to reinstall same zip file of CM10.1 it failed on signature verification.
please help me sir help me..!!
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Gr8mobiPro said:
no sir ny fone is not showing this
it still says
Connect Usb
data cable
i stuck while i was on jbleak 4.1.2 and through SD card i flashed CM 10.1
once it worked but now it stucked on the boot logo ... it appears and gone ... and then shows black screen.
even in recovery when i tried to reinstall same zip file of CM10.1 it failed on signature verification.
please help me sir help me..!!
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Chill man..nothing to worry about..please install motorola drivers..it should work.
its still not working
nishant203 said:
Chill man..nothing to worry about..please install motorola drivers..it should work.
Click to expand...
Click to collapse
wot motorola driver ..?? i have installed moto device manager and it is not showing any thing connected.. because it remain in boot mode..:crying::crying::crying::crying::crying::crying::crying:
Use Virtual PC
I still have the same issue. I have installed Windows 7 on VM Ware workstation i.e virtual desktop and then followed the below steps :-
-Reboot your Virtual PC
-Install Motorola drivers.
-Reboot your computer
-Install RSD Lite
-Reboot your computer
-Boot your phone into Fastboot mode
-Connect your phone to your computer using a high-quality (preferably OEM) cable.
-Let your PC install any necessary drivers. When it finishes it should tell you that the device "Fastboot Edison S" is ready for use.
-Turn your phone off, disconnect the cable
-Reboot your computer
-Boot your phone back into Fastboot mode
-Wait a couple seconds then connect your phone to your computer
-Wait a couple more seconds, then look at the bottom text that's displayed on your phone. It should say
This means that your phone is connected to your computer.
-Open up RSD Lite
-Wait a couple seconds. At the top of the list should be your phone (under model it should say "Fastboot Edison S")
-If you've done all this and everything has worked out for you, flash the fxz! Make sure to follow the instructions in the noob thread as specifically as possible
Gr8mobiPro said:
wot motorola driver ..?? i have installed moto device manager and it is not showing any thing connected.. because it remain in boot mode..:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
This seems to be happening more lately. it IS a driver issue of some sort, that is for sure. I would just use one of the scripts, or moto-fastboot manually. they do the same thing as rsd but through command line either with your own typing, or a .bat script.
This may also work better in linux, so you can try downloading a live cd/usb of ubuntu and seeing if it is recognized. no need for drives with linux, just download one of the scripts that includes the moto-fastboot utility. Let me know if you need more help.
same issue
i am having the same issue with my at&t atrix 2. it is soft bricked due to an upgrade from gb to jbleak. ap fastboot flash mode (s) oa.65 battery ok ok to program connect usb data cable same message i have installed different motorola usb driver versions. i have also soldered the 4 pin to the 1 red+5v factory usb cable
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNE6DkvEZi41YPAYKVPqH_AlA4f4cQ
but still my pc says unable to recognize usb device. i dnt what to do any more. im in mexico and purchasing a new phone is very expensive i need help is there something any one can do i am sure my device is not completely bricked i just cant get the mofokin pc to recognize the mofokin phone in fastboot
heyyy!!! im jerickypops05 i posted in this forum about a few months ago.... this is my new account in xda, because i forgot my password...this is the same problem i posted in my last account..
I installed TWRP on my Verizon Galaxy S3 SCH-I535 using Flashify....after the recovery installed ,i restarted my device and this message appear with a triangle (color yellow) and an exclamation point....
"system software not authorized by verizon wireless" and in the top-left corner was "Secure Fail: Kernel"
Please help me i tried all the possible solutions on google but no luck
i tried going into download mode but the key combination is not working
and when i tried the key combination the phone vibrates every second
the download mode message is not showing only black screen
PLEASE HELP ME!!!!:crying::crying::crying:
JeRiCkY_pOpS said:
heyyy!!! im jerickypops05 i posted in this forum about a few months ago.... this is my new account in xda, because i forgot my password...this is the same problem i posted in my last account..
I installed TWRP on my Verizon Galaxy S3 SCH-I535 using Flashify....after the recovery installed ,i restarted my device and this message appear with a triangle (color yellow) and an exclamation point....
"system software not authorized by verizon wireless" and in the top-left corner was "Secure Fail: Kernel"
Please help me i tried all the possible solutions on google but no luck
i tried going into download mode but the key combination is not working
and when i tried the key combination the phone vibrates every second
the download mode message is not showing only black screen
PLEASE HELP ME!!!!:crying::crying::crying:
Click to expand...
Click to collapse
Read some Stickies, there's guides written to fix this. It's in Android development, called softbrick repair guide.
If you're still confused do a search, this question was answered 1000 times. It's an easy fix.
JeRiCkY_pOpS said:
heyyy!!! im jerickypops05 i posted in this forum about a few months ago.... this is my new account in xda, because i forgot my password...this is the same problem i posted in my last account..
I installed TWRP on my Verizon Galaxy S3 SCH-I535 using Flashify....after the recovery installed ,i restarted my device and this message appear with a triangle (color yellow) and an exclamation point....
"system software not authorized by verizon wireless" and in the top-left corner was "Secure Fail: Kernel"
Please help me i tried all the possible solutions on google but no luck
i tried going into download mode but the key combination is not working
and when i tried the key combination the phone vibrates every second
the download mode message is not showing only black screen
PLEASE HELP ME!!!!:crying::crying::crying:
Click to expand...
Click to collapse
Your device has a locked bootloader, you can't flash TWRP on a device with a locked bootloader. Don't just assume you can flash anything on any device, there are factors that change what can be flashed or even if anything can be flashed at all.
Your only options are:
1) flash stock firmware via Odin
2) follow this thread to unbrick Verizon S3
https://forum.xda-developers.com/showthread.php?t=2581166
3) send your device to a repair shop that offers a JTAG service.
4) replace the motherboard in your device
5) buy a new device.
Side note: the moderators/Admin here can remove your old account, they don't like members having more than one account, you need to let them know to remove it, post in the thread below to inform them so they can find it and remove it.
https://forum.xda-developers.com/showthread.php?t=1976627
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
BadUsername said:
Read some Stickies, there's guides written to fix this. It's in Android development, called softbrick repair guide.
If you're still confused do a search, this question was answered 1000 times. It's an easy fix.
Click to expand...
Click to collapse
i will try that.........thank you:angel:
Droidriven said:
Your device has a locked bootloader, you can't flash TWRP on a device with a locked bootloader. Don't just assume you can flash anything on any device, there are factors that change what can be flashed or even if anything can be flashed at all.
Your only options are:
1) flash stock firmware via Odin
2) follow this thread to unbrick Verizon S3
https://forum.xda-developers.com/showthread.php?t=2581166
3) send your device to a repair shop that offers a JTAG service.
4) replace the motherboard in your device
5) buy a new device.
Side note: the moderators/Admin here can remove your old account, they don't like members having more than one account, you need to let them know to remove it, post in the thread below to inform them so they can find it and remove it.
https://forum.xda-developers.com/showthread.php?t=1976627
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
i'll let them know about my old account...thanks for sharing that.:good::good:
Is my device Hard-Bricked??
i dont want to go to a repair shop, i dont have enough money....
JeRiCkY_pOpS said:
i'll let them know about my old account...thanks for sharing that.:good::good:
Is my device Hard-Bricked??
i dont want to go to a repair shop, i dont have enough money....
Click to expand...
Click to collapse
It's just softbricked, you don't need to use JTAG or the hard brick guide, just follow the softbricked guide with a ne1 stock ROM. The one by the pagel works perfectly.
BadUsername said:
It's just softbricked, you don't need to use JTAG or the hard brick guide, just follow the softbricked guide with a ne1 stock ROM. The one by the pagel works perfectly.
Click to expand...
Click to collapse
i followed all your instructions, but i see in this thread "https://forum.xda-developers.com/showthread.php?t=2586319" that it is needed to go to download mode to debrick the soft-bricked Verizon galaxy s3..... and as i said i can't go to download mode......and when i go to this thread "https://forum.xda-developers.com/showthread.php?t=2581166" this fix work on hard bricked devices for example "the device wont turn on at all, no odin mode, no download mode"
But i think my device is softbricked and also hard bricked because i can turn it on (like softbrick) and stating the message "system software not authorized by verizon", and also can't go to odin/download mode (like hardbricked)
What's happening in my Device?? :crying::crying::crying:
JeRiCkY_pOpS said:
i followed all your instructions, but i see in this thread "https://forum.xda-developers.com/showthread.php?t=2586319" that it is needed to go to download mode to debrick the soft-bricked Verizon galaxy s3..... and as i said i can't go to download mode......and when i go to this thread "https://forum.xda-developers.com/showthread.php?t=2581166" this fix work on hard bricked devices for example "the device wont turn on at all, no odin mode, no download mode"
But i think my device is softbricked and also hard bricked because i can turn it on (like softbrick) and stating the message "system software not authorized by verizon", and also can't go to odin/download mode (like hardbricked)
What's happening in my Device?? :crying::crying::crying:
Click to expand...
Click to collapse
The boot from SD card method that I gave you a link to might work in your situation.
Or, you can try buying a USB jig from eBay for $3-5, it's a tool designed to force your device into download mode. It isn't guaranteed to work but if it does you can flash the firmware. If it doesn't then you only lose $5.
If you can't fix it yourself then a JTAG service is your best option, it isn't guaranteed to work either and it usually costs around $50 plus it has to be shipped to the shop, repaired and then shipped back to you.
Or you can buy another motherboard and put the new one in your device. This is an option you can do yourself of you're careful.
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
JeRiCkY_pOpS said:
i followed all your instructions, but i see in this thread "https://forum.xda-developers.com/showthread.php?t=2586319" that it is needed to go to download mode to debrick the soft-bricked Verizon galaxy s3..... and as i said i can't go to download mode......and when i go to this thread "https://forum.xda-developers.com/showthread.php?t=2581166" this fix work on hard bricked devices for example "the device wont turn on at all, no odin mode, no download mode"
But i think my device is softbricked and also hard bricked because i can turn it on (like softbrick) and stating the message "system software not authorized by verizon", and also can't go to odin/download mode (like hardbricked)
What's happening in my Device?? :crying::crying::crying:
Click to expand...
Click to collapse
There's no reason why you can't get into download mode.
USB jig, or use ADB and force it into download mode.
There is absolutely no way you're hard bricked, booting from an SD card won't work in this case because your phone turns on normally. Just keep trying every method you can find to force your phone into download mode and work from there.
BadUsername said:
There's no reason why you can't get into download mode.
USB jig, or use ADB and force it into download mode.
There is absolutely no way you're hard bricked, booting from an SD card won't work in this case because your phone turns on normally. Just keep trying every method you can find to force your phone into download mode and work from there.
Click to expand...
Click to collapse
I agree, I don't see any reason why it can't get to download mode. Something should work.
JeRiCkY_pOpS said:
i followed all your instructions, but i see in this thread "https://forum.xda-developers.com/showthread.php?t=2586319" that it is needed to go to download mode to debrick the soft-bricked Verizon galaxy s3..... and as i said i can't go to download mode......and when i go to this thread "https://forum.xda-developers.com/showthread.php?t=2581166" this fix work on hard bricked devices for example "the device wont turn on at all, no odin mode, no download mode"
But i think my device is softbricked and also hard bricked because i can turn it on (like softbrick) and stating the message "system software not authorized by verizon", and also can't go to odin/download mode (like hardbricked)
What's happening in my Device?? :crying::crying::crying:
Click to expand...
Click to collapse
Have you tried pulling the battery out, then holding the volume down+home+power then inserting the battery to "bump" it into download mode?
It's a little tricky but has been known to work pretty reliably.
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
I agree, I don't see any reason why it can't get to download mode. Something should work.
Have you tried pulling the battery out, then holding the volume down+home+power then inserting the battery to "bump" it into download mode?
It's a little tricky but has been known to work pretty reliably.
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
it does not work...:crying::crying:
BadUsername said:
There's no reason why you can't get into download mode.
USB jig, or use ADB and force it into download mode.
There is absolutely no way you're hard bricked, booting from an SD card won't work in this case because your phone turns on normally. Just keep trying every method you can find to force your phone into download mode and work from there.
Click to expand...
Click to collapse
how can i force this to download mode using ADB if the PC can't detect my device??
JeRiCkY_pOpS said:
how can i force this to download mode using ADB if the PC can't detect my device??
Click to expand...
Click to collapse
USB jig, or keep trying the power + volume down combination.
BadUsername said:
USB jig, or keep trying the power + volume down combination.
Click to expand...
Click to collapse
im gonna try USB JIG i'll tell you if it works.....thanks
iT WORKS NOW!!!!! I am using it now while replying......:laugh: I used USB JIG and it works....thank you all for helping me..I appreciate it so much:victory:
Ok so I went to flash twrp recovery onto my phone and something went wrong while using oden... My usb debugging is turned on and OEM Unlocked. Now my phone screen stays completely black. Its caught in a bootloop and No buttons work to bring it back into download mode, Only Upload mode works.. But Odin will not flash anything to my phone in Upload mode. It changes my samsung usb drivers to msm upload or modem drivers. I have been at this for weeks trying to get my s8+ to attach to my computer again using ADB, ODIN, SD CARD, AND EVEN THAT JIG Thing to force it into download mode but TO NO AVAIL.. I Have to some how get back into download mode but no button combinations will work.. It seems to bootloop on me before it reaches those commands. The bootloader is obviously gone to a certain degree since upload mode still works.. Is there any way to use Odin in upload mode? Or is there any other way I can reflash stock rom to fix this issue? I have no recovery, no safe mode, no download mode?? My phone is basically a paper weight right now.. When I know All my stuff is still on there. This S8+ Phone has put up a good fight with me on my pc But Im not one to loose. I love a good challange.. Any suggestions. I thought ADB Was my best bet but with no connect I cant do any thing. I cant' get Adb to find my device. Oh even tryed older versions of odin with low level quallcom drivers and that didn't work either. Odin will read a com port to my device but i'm in the wrong mode (Upload Mode) and Odin cant establish a connection. When in Upload Mode its the hellish one as xda deveopers have said before..
S8+ phone is Model Number SM-G950U
Witch I believe has now been upgraded to SM-G955U OR F.. But I have the original stock rom still for SM-G950U if only I can get into some kind of Download Mode.
Ive even sat watching odin as I push every single button combination watching the ports appear and dissapear as it reboots trying to find some kind of way to download to the phone... But no luck..
UNKNOWN ERROR
DDR VENDER : UNKNOWN
SOC_HW_REVISION : 2.1
SKIP PRINT_SUMMERY_TO_LCD
GENERATING SUMMERY........
GENERAL INFO
DDR INFO
DCVS INFO
RPM INFO
RECOVERED FROM AN EXCEPTION
DONE
Then if I hold the up button for a few seconds I get this underneath
SYNCHRONOUS EXCEPTION
LR : 0x0000000085e36d98
sp : 0x000000001407bbb0
pc : 0x0000000085e36df8
Not sure what that means or how to look up those codes but I know its all bad.. If anyone can think of any other way to connect my phone to reflash stock rom to fix Please let me know any theories or suggestions you may have for me to try... Thank You...
Gkeplar said:
Ok so I went to flash twrp recovery onto my phone and something went wrong while using oden... My usb debugging is turned on and OEM Unlocked. Now my phone screen stays completely black. Its caught in a bootloop and No buttons work to bring it back into download mode, Only Upload mode works.. But Odin will not flash anything to my phone in Upload mode. It changes my samsung usb drivers to msm upload or modem drivers. I have been at this for weeks trying to get my s8+ to attach to my computer again using ADB, ODIN, SD CARD, AND EVEN THAT JIG Thing to force it into download mode but TO NO AVAIL.. I Have to some how get back into download mode but no button combinations will work.. It seems to bootloop on me before it reaches those commands. The bootloader is obviously gone to a certain degree since upload mode still works.. Is there any way to use Odin in upload mode? Or is there any other way I can reflash stock rom to fix this issue? I have no recovery, no safe mode, no download mode?? My phone is basically a paper weight right now.. When I know All my stuff is still on there. This S8+ Phone has put up a good fight with me on my pc But Im not one to loose. I love a good challange.. Any suggestions. I thought ADB Was my best bet but with no connect I cant do any thing. I cant' get Adb to find my device. Oh even tryed older versions of odin with low level quallcom drivers and that didn't work either. Odin will read a com port to my device but i'm in the wrong mode (Upload Mode) and Odin cant establish a connection. When in Upload Mode its the hellish one as xda deveopers have said before..
S8+ phone is Model Number SM-G950U
Witch I believe has now been upgraded to SM-G955U OR F.. But I have the original stock rom still for SM-G950U if only I can get into some kind of Download Mode.
Ive even sat watching odin as I push every single button combination watching the ports appear and dissapear as it reboots trying to find some kind of way to download to the phone... But no luck..
UNKNOWN ERROR
DDR VENDER : UNKNOWN
SOC_HW_REVISION : 2.1
SKIP PRINT_SUMMERY_TO_LCD
GENERATING SUMMERY........
GENERAL INFO
DDR INFO
DCVS INFO
RPM INFO
RECOVERED FROM AN EXCEPTION
DONE
Then if I hold the up button for a few seconds I get this underneath
SYNCHRONOUS EXCEPTION
LR : 0x0000000085e36d98
sp : 0x000000001407bbb0
pc : 0x0000000085e36df8
Not sure what that means or how to look up those codes but I know its all bad.. If anyone can think of any other way to connect my phone to reflash stock rom to fix Please let me know any theories or suggestions you may have for me to try... Thank You...
Click to expand...
Click to collapse
You have a 950 u locked bootloader. First mistake trying to flash twrp. Only option you have is finding the revision bootloader you where on edl files and pinout to 9008 edl mode. There as of last known no fix other than for upload mode only.
Thank You
TheMadScientist said:
You have a 950 u locked bootloader. First mistake trying to flash twrp. Only option you have is finding the revision bootloader you where on edl files and pinout to 9008 edl mode. There as of last known no fix other than for upload mode only.
Click to expand...
Click to collapse
Thank You I will try that And reply back with results
Gkeplar said:
Thank You I will try that And reply back with results
Click to expand...
Click to collapse
What revision bootloader was it on? I have several of them but not all
TheMadScientist said:
What revision bootloader was it on? I have several of them but not all
Click to expand...
Click to collapse
It was on its original bootloader for the Samsung Galaxy S8+ SM-G950U. It was SnapDragon bootloader
TheMadScientist said:
What revision bootloader was it on? I have several of them but not all
Click to expand...
Click to collapse
I'm working on reading this thread now trying to follow there instructions, https://forum.xda-developers.com/galaxy-s8/help/s8-g950u-hardbrick-t3668572
Gkeplar said:
It was on its original bootloader for the Samsung Galaxy S8+ SM-G950U. It was SnapDragon bootloader
Click to expand...
Click to collapse
Mate there are 7 different revisions of the 950 u bootloader. Across all the software updates. No offense intended. But if you can't even give this little bit of info I can assure you. Your not gonna be able to dissemble this device. Ground out the test points to enter edl. And flash needed repair files. Which is very tedious. If there is any issues. I would mark this device as lost and get another. I dont feel that you have the necessary skills needed to complete this process...
---------- Post added at 10:49 PM ---------- Previous post was at 10:38 PM ----------
Gkeplar said:
I'm working on reading this thread now trying to follow there instructions, https://forum.xda-developers.com/galaxy-s8/help/s8-g950u-hardbrick-t3668572
Click to expand...
Click to collapse
Unless you are on revision 2 bootloader that is no use to you
---------- Post added at 10:51 PM ---------- Previous post was at 10:49 PM ----------
Gkeplar said:
I'm working on reading this thread now trying to follow there instructions, https://forum.xda-developers.com/galaxy-s8/help/s8-g950u-hardbrick-t3668572
Click to expand...
Click to collapse
Unless you are on revision 2 bootloader that is no use to you
You are not in edl mode. You are stuck in upload. The only way to get to edl mode is disassemble the device flip the motherboard upside down while hooked up. Ground out a test pin on the mother board while connecting the usb cable.
Hello, i wanted to ask how to fix the fastboot mode.
Everytime when i try to access it, it just says "Entering Fastboot..."and thats all.
I dont want to close it, thats not my problem, i just wanna flash a recovery.img, and the fastboot seems not working. Any ideas?
M3DUS4 said:
Hello, i wanted to ask how to fix the fastboot mode.
Everytime when i try to access it, it just says "Entering Fastboot..."and thats all.
I dont want to close it, thats not my problem, i just wanna flash a recovery.img, and the fastboot seems not working. Any ideas?
Click to expand...
Click to collapse
this could be because the galaxy A51 wasnt built with fastboot, and the code to launch this option was just reused from a different device, or because something isnt connecting properly.
Hello, I have the same ... Android 11 (and currently 12) (from Frija). So it is not the fault of incorrect configuration or with connecting. Only something is wrong with this phone ...
I have this device and this solved it for me:
Enable OEM unlocking in developer settings
Shut down the phone
Hold volume up and volume down
Plug in a USB cable connected to a computer (the computer being turned on)
Keep holding
You're in download mode!
Side note: This might not work in USA or Canada, I am from europe and it works here. I have no idea if it works in another region. Also, you can't just flash a recovery.img on Samsung since there is no real "fastboot", you have to use download mode and Odin.
But I know how to enter download mode... Problem is Fastboot mode...
There is no fastboot mode on a modern Samsung device. If there is, it's fake and you cannot flash anything with it. As you can see even from Wikipedia, Odin is the Samsung replacement of fastboot.
So no fastboot, only download mode.
If a guide is saying to use fastboot, it is not compatible with Samsung.
If you would tell me why you specifically need fastboot, I'll be happy to tell you how you can do it with Odin, if possible.
Because I have Samsung Galaxy A51 5G (A516B) with new Android 12 and I can't do a root! Because I can't upload TWRP (custom recovery) because I haven't OEM unlock option in Deveoper Option. I tried trick with set back date by 7days but not succes. Everything I;ve metioned here - I did at my phone with Android 11.
And... I have read that I can turn this fu**ing OEM option by comend at ADB: fastboot oem unlock.
Phew ...
So this fastboot method is the last method to do a root with my phone.
Upload TWRP by Odin in download mode -ends red warning - of corse...
Have you any ideas?
I would be grateful for help...
I have read this fastboot method at:
How to Unlock Bootloader On Samsung Galaxy Phones [EASY GUIDE]
Are you looking for a Complete tutorial on How To Unlock Bootloader on Samsung Galaxy Phones? If yes, then you have come to the right place.
www.guidetoroot.com
Yeah, that guide is not relevant on any modern Samsung device. Besides, even if it was, which it isn't, you would first need to enable OEM unlocking from the Developer Settings.
But the fact that you don't have an option for OEM unlock is weird, since I have the exact same device model and it is there for me.
May I ask what is your region and is your phone locked to a telephone carrier?
My region is PLS - Poland. And not - phone is not locked. Have you the newest system Android 12?
Yes, I do. It's weird that there isn't even an option for you.
I'll try to come up with some new ideas if I have time...
I'll be glad for it...
Hej, do you have any idea?
stanwin said:
Hej, do you have any idea?
Click to expand...
Click to collapse
Have you tried everything listed here?
BloodyFruitDestroyer said:
Have you tried everything listed here?
Click to expand...
Click to collapse
Yes, I did. Evething exept the last one...
You could try it. It might be risky, but it's the only option I personally can come up with right now.
I've tried this option but Odin stuck on "files verification". Any help?
have any of you encountered this problem?
And how did you solve it?
You can also try searching for combination firmware for your device online