Hi,
I have the honor 8 FRD-Al00 (chinese) only 2 days .
The phone ask to update the emui, and i did but now the phone is stock in erecovery mode when ask to download the latest version and recovery via wifi but fail every time.
I try to reset to fabric settings but don´t work.
i don´t know what happen and i don´t know what to do anymore.
Please anyone can help me?
Thanks
Rommco05 said:
Where you buy phone? You have warranty?
Click to expand...
Click to collapse
is a gift, but i know is from gearbest but if i can resolve the problem here is better than send the phone to chine and all the process.
Rommco05 said:
hm another bad situation. For your model isn't (or I don't know where) full firmware which can be useful. Try this, install HiSuite to PC and here is one section to repair phone, follow instruction in this program.
edit: try reset your wifi setting, setup for short without possword and try again download via eRecovery latest version
Click to expand...
Click to collapse
i have try the two methods but don´t work. via wifi fails everytime. via hisuite the recovey said the phone is not supported
Rommco05 said:
Fastboot recognized phone? If yes which Android you have last one? You can try unlock bootloader and flash custom recovery TWRP and after custom rom, thats maybe can help but warranty will be gone after amd I really don't know what happened after unlocking bootloader
Click to expand...
Click to collapse
you want to know if i can enter in menu fastboot? power and volume down key? yes and said Phone locked Frp lock. the android in the begin are 7.0 but after this happen i try to reset to fabric so now i don´t know.
Rommco05 said:
FRP lock and in HiSuite isn't option rollback?
edit: check this http://cn.club.vmall.com/thread-11316965-1-1.html
Click to expand...
Click to collapse
in hisuite the only option is system recovery but the phone is not supported
Rommco05 said:
Sorry man I think you must use warranty or some other member have more info like me
Click to expand...
Click to collapse
Thanks for try to help me.
If anyone else knows how to help me please let me know.
And i continue to investigate and if i know a solution i post here for others with the same problem.
Do you have unlocked bootloadrr
venugopalu007 said:
Do you have unlocked bootloadrr
Click to expand...
Click to collapse
no, i have made anything to the phone
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Rommco05 said:
ufff, factory reset in stock recovery? Or try again repeat setup
edit: how you fix boot to ROM?
Click to expand...
Click to collapse
i made the factory reset but the phone is stuck in startup. don´t exit the startup
i have some firmwares for this and i try lol if i can make this to work right i make here my all processe and links for everyone. but know i'm stuck on this
Rommco05 said:
It is Nougat or Marshmallow?
Click to expand...
Click to collapse
Marshmallow
Rommco05 said:
Again flash ROM via dload
Click to expand...
Click to collapse
i made but is the same
MagicMinds said:
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Click to expand...
Click to collapse
hold a moment , do you use VOLTE based Sim??
Honor 8 FRD-AL00 Briked
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
bugsbunny69 said:
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
Click to expand...
Click to collapse
Are you able to flash twrp?
Unfortunately, I can not get in any way to restart with recovery from SDcard but it does not recognize any firmware stops at 5% with the following message (software install failed).
thank you!
Rommco05 said:
U can boot to fastboot, if yes which status have FRP and PHONE are both unlocked?
Click to expand...
Click to collapse
No! I have already explained it does not enter fastboot and is not recognized by the PC, the only way is sd card but I tried various firmware stops at 5% even seza sd card.
When it enters sdcard recovery mode and connects to the PC it is reconnected in this way as a CDROM (linux file-cd gadget usb device).
Thank you!
Rommco05 said:
I don't know what next, leave him again discharged because u need fastboot and in recognise phone, if u can't boot to fastboot u can't do anything this a serious problem
Click to expand...
Click to collapse
I know I just have to try to give it back, hoping it's a guarantee with the Chinese people, I've already made a complaint that after two days the smartphone gave me problems, but the support office opens on 28/8.
Thanks for everything!
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
I need help ;-;
gagi92bb said:
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
Click to expand...
Click to collapse
I have a honor 8 al00, i can't restore ;-;
Related
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
ST4NL3//Y said:
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
Click to expand...
Click to collapse
till now is no news about that, how? when? where? what? i dont know
ST4NL3//Y said:
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
Click to expand...
Click to collapse
i'm waiting too :crying:
maybe other solution?(
can someone smart can help us?
Can pay someone?
MadL1fe said:
i'm waiting too :crying:
maybe other solution?(
can someone smart can help us?
Can pay someone?
Click to expand...
Click to collapse
bring your phone to services center, your problem will solved but you must pay it
I already tried everything, but it looks like we will have to wait even. there is no any news about a tool I'm sad without my moto G
Sandivisi said:
bring your phone to services center, your problem will solved but you must pay it
Click to expand...
Click to collapse
in my country no motorola service centers
many of us have lost the guarantee of motorola
ST4NL3//Y said:
many of us have lost the guarantee of motorola
Click to expand...
Click to collapse
I will pay what I can, if someone will help restore .Here is a lot of clever people ... that no one can help?
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
konsolen said:
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
Click to expand...
Click to collapse
no man, the phone doesnt boot into fastboot
and we need blankflash/mbm-ci for new bootloader lollipop to make it work
correct need of blankflash compatible with 5.0
i dont need fastboot.
i upload with a serial line in raw format.
konsolen said:
i dont need fastboot.
i upload with a serial line in raw format.
Click to expand...
Click to collapse
how?
my phone dead after downgrade to 4.4.3 then upgrade to 4.4.4 from android 5.0
Sandivisi said:
how?
my phone dead after downgrade to 4.4.3 then upgrade to 4.4.4 from android 5.0
Click to expand...
Click to collapse
me was exactly the same
Then go to the store.
i will give you my help and you want inform me about updates.
i read that, but you shredder your masterboot register in nandflash.
there is no android. this is the lowest level of a device. name it layer 0.
you crashed the register where the cpu looks what he must do, to start the first sequence.
konsolen said:
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
Click to expand...
Click to collapse
come on, help us
---------- Post added at 10:54 PM ---------- Previous post was at 10:47 PM ----------
konsolen said:
Then go to the store.
i will give you my help and you want inform me about updates.
i read that, but you shredder your masterboot register in nandflash.
there is no android. this is the lowest level of a device. name it layer 0.
you crashed the register where the cpu looks what he must do, to start the first sequence.
Click to expand...
Click to collapse
i dont understand what you mean, so what should I do
ok.the qualcomm driver is installed right?
then load the teamviewer.exe app.
i look for the right snapdragon 400 mbr and connect then to your pc.
konsolen said:
ok.the qualcomm driver is installed right?
then load the teamviewer.exe app.
i look for the right snapdragon 400 mbr and connect then to your pc.
Click to expand...
Click to collapse
yes, it already installed
and for what teamviewer?
i must connect to flash.
same problem with me .I flashed stock rom to downgrade to 4.4.3 from rooted stock lollipop OS because of messing up build.prop file.After that,I have installed OTA update to 4.4.4,then the problem starts no bootloader,no boot,no fastboot,no adb,no recovery and except qhsusb_bulk when connected to PC.After 2 days ,its now showing sometimes as usb input device ,with LED light blinking.Not sure if there is solutuion for this.pls help if anyone found the solution
Hello all, I have a problem because when you unlock my mobile phone started looping off and in general does not start.
I can not enter into TWRP because I gave erase all data. :crying:
What do I need to download? Where all this throw?
Im from poland and I do not know which version of the software should be good
I would greatly appreciate if anyone will be able to help me! :good:
EDIT#1
I download old firmware 5.1.1 from producent page i put dload folder on sd card and this is what happens
https://youtu.be/OyyD1vd8NHA
EDIT#2
If i connect usb cable to phone, instalation started, but its stuck on 90%
refresh!
hi.
try to Enter to fastboot mode. what does it tells you? locked or unlocked? and is it known in ADB?
@erfan7979
Its unlocked, adb dont see my phone
refresh
if i put same update.app my phone tells me its wrong software, what is going on...
http://forum.xda-developers.com/showthread.php?t=3163407
Sent from my CHM-U01 using Tapatalk
ShowMustGoOn said:
@erfan7979
Its unlocked, adb dont see my phone
Click to expand...
Click to collapse
you dont have some drivers.
phone have to be known in adb by :fastboot devices
So far I always found answers to all my questions here without ever asking. This forum is awsome! Thanks to everyone here doing good work!
My problem: I have the European version of the Honor View 10. I opened bootloader, I installed the Magisk correctly with the 15.4 version, worked all fine. (thank you topjohnwu)
Then MY mistake ... I wanted to install Xposed Installer. I was not concentrated that moment and took the wrong version! From my other Honor phone (android 6.0, version 89, arm64). Absolutely stupid!
Phone restarted ... bootloop ... and goes into eRecovery. I tried everything I could there, clear dalvik cache, factory reset. > no change!
Then I thought ok, connect to PC, safe mode ... adb ... but no success. adb devices brings no result. PC does not find my phone anymore. I hoped I could get into my phone by connecting with PC, but it seems I am unable. So I can not help myself this way.
Next try was to force the phone to update with SD card. I only found asian update software, but I already did not care. I want to save my phone. Update starts, but after 5% it stops, update fail.
Now I hope that someone here can help. I have no idea what else I could do. Best regards, Markus
mark_at said:
So far I always found answers to all my questions here without ever asking. This forum is awsome! Thanks to everyone here doing good work!
My problem: I have the European version of the Honor View 10. I opened bootloader, I installed the Magisk correctly with the 15.4 version, worked all fine. (thank you topjohnwu)
Then MY mistake ... I wanted to install Xposed Installer. I was not concentrated that moment and took the wrong version! From my other Honor phone (android 6.0, version 89, arm64). Absolutely stupid!
Phone restarted ... bootloop ... and goes into eRecovery. I tried everything I could there, clear dalvik cache, factory reset. > no change!
Then I thought ok, connect to PC, safe mode ... adb ... but no success. adb devices brings no result. PC does not find my phone anymore. I hoped I could get into my phone by connecting with PC, but it seems I am unable. So I can not help myself this way.
Next try was to force the phone to update with SD card. I only found asian update software, but I already did not care. I want to save my phone. Update starts, but after 5% it stops, update fail.
Now I hope that someone here can help. I have no idea what else I could do. Best regards, Markus
Click to expand...
Click to collapse
Did you already try ro flash ramdisk and system sith stock images via fastboot?
alohahe3000 said:
Did you already try ro flash ramdisk and system sith stock images via fastboot?
Click to expand...
Click to collapse
I would flash anything ... if I could! That is my problem at the moment and I can not solve it.
When I start phone I get into Huawei eRecovery after two tries to boot > does not help!
When I connect to PC > phone gets not detected! (during boot try it gets connected shortly ... but then gets disconnected after some seconds, in between I can not get into phone via PC)
So when I would want to use fastboot .... not possible because of that issue. I tried to connect in fastboot mode ... but no difference. Actually I do not understand why I can not connect to PC anymore!
The only way I can imagine now is flash or update something via SD card. I tried with asian update.zip, but it will only go to 5% .... and then ends.
But to be honest ... I am not very optimistic about finding any solution. I think only some very smart pro from this site might have an idea. But not sure if these guys read questions about bootloops.
mark_at said:
Next try was to force the phone to update with SD card.
Click to expand...
Click to collapse
Try to flash via Fastboot the stock rom... do a full wipe and reboot.
here the link to the stock ROM:
https://mega.nz/#!W9hjiTgZ!_ZGq7V83bkWPF_Ue7_c41wVXNrQ_YjnsQUxRS0_MevU
Taobaibai said:
Try to flash via Fastboot the stock rom... do a full wipe and reboot.
Click to expand...
Click to collapse
Thanks for the link. But how can I flash via fastboot when my phone is not detected from the PC? That is my main problem at the moment!
That is why I wrote about all things I had tried already. And being unable to connect to the computer is really worrying me!
"adb devices" will not find my phone!
mark_at said:
Thanks for the link. But how can I flash via fastboot when my phone is not detected from the PC? That is my main problem at the moment!
That is why I wrote about all things I had tried already. And being unable to connect to the computer is really worrying me!
"adb devices" will not find my phone!
Click to expand...
Click to collapse
You have to boot into fastboot modus. When booting, push power and Volume down button. A white screen appears if device is connected with PC.
Then try "fastboot devices". If your device is displayed, you can flash with "fastboot flash" system image. Stock system.img download link can be found in AOSP thread, second post.
alohahe3000 said:
You have to boot into fastboot modus. When booting, push power and Volume down button. A white screen appears if device is connected with PC.
Then try "fastboot devices". If your device is displayed, you can flash with "fastboot flash" system image.
Click to expand...
Click to collapse
Exactly
alohahe3000 said:
Stock system.img download link can be found in AOSP thread, second post.
Click to expand...
Click to collapse
Or just use my link. I copied it from the AOSP Thread
I managed to get my phone displayed when I entered fastboot devices.
And I managed to flash the img!! Hurra !!
Thank you very very much to everyone here helping me ...
I thought that nothing would work because when I typed "abd devices" nothing happened. But when I typed "fastboot devices" the phone was there.
mark_at said:
I managed to get my phone displayed when I entered fastboot devices.
And I managed to flash the img!! Hurra !!
Thank you very very much to everyone here helping me ...
I thought that nothing would work because when I typed "abd devices" nothing happened. But when I typed "fastboot devices" the phone was there.
Click to expand...
Click to collapse
It wasn't so difficult.
Viel Spaß mit dem Smartphone!!!
one more thing I have to add:
after flashing the system.img from the link above .... I have FRP lock .... that was not before.
does it mean I have to relock my bootloader and then unlock it once again? In some other thread I found that information.
mark_at said:
one more thing I have to add:
after flashing the system.img from the link above .... I have FRP lock .... that was not before.
does it mean I have to relock my bootloader and then unlock it once again? In some other thread I found that information.
Click to expand...
Click to collapse
and now I relocked bootloader .... and guess what? bootloop again ... and I can not unlock it again, because I did not think about enable OEM unlock! It says necessary to unlock FRP before.
I am terribly sorry for being such an idiot!!
mark_at said:
and now I relocked bootloader .... and guess what? bootloop again ... and I can not unlock it again, because I did not think about enable OEM unlock! It says necessary to unlock FRP before.
I am terribly sorry for being such an idiot!!
Click to expand...
Click to collapse
Never ever relock bootloader untill you have a backup plan. We have dload method till emui 7 buut not sure on EMUI 8 so can't suggest you anything at the moment. Someone played with EMUI 8 can guide you through it.
I understand that I was not allowed to relock bootloader! I feel awful and stupid about it ... believe me!
I was able to erase FRP with HCU client from DC Phoenix.
After that I was in phone again
And afterwards I could open the bootloader again.
Halleluja!!
Thanks for everyone's help here ...
Hi all. I have the Canadian Huawei P20 (EML-L09 from Koodo) and the bootloader is locked. Also, USB debugging was never enabled on this phone. After an OTA update my phone is stuck on the eRecovery screen with the following 4 options:
1) Download latest version and recovery
2) Wipe data/factory reset
3) Reboot
4) Shutdown
I've tried all of the above options and the phone always take me back to this eRecovery screen. When I tried option 1, it tells me "Package info failed" or something.
I've searched around and read that I can flash the Service firmware using the sd card method, however, I am not sure which version of the service firmware I need to get? Could anyone of you with the Canadian version help me out? Is it the C900 version, if so, where can I download it since I can't seem to find it anywhere. Please help and thanks in advance!
EDIT: Just realized that the P20 does not have an sd card slot...
Have you tried to download the relevant firmware on a computer, and connect to device to the computer? Thinking usb otg...
I haven't done this on a P20, but on a nexus 6p.
Skickat från min EML-L29 via Tapatalk
Kaherdin said:
Have you tried to download the relevant firmware on a computer, and connect to device to the computer? Thinking usb otg...
I haven't done this on a P20, but on a nexus 6p.
Skickat från min EML-L29 via Tapatalk
Click to expand...
Click to collapse
Thanks for the suggestion, Kaherdin! I will try it out and report back.
So far, I've tried flashing the boot, recovery, cust, and system partitions via fastboot without any luck. It always came back with remote: command not allowed. I am guessing that's due to the bootloader/FRP is locked?
When you're frp is locked you can't use ADB/fastboot.
You're always end in erecovery? Just to make sure, you have unplugged USB cable? When you select latest firmware you've entered the right WiFi code?
QAndroid said:
Thanks for the suggestion, Kaherdin! I will try it out and report back.
So far, I've tried flashing the boot, recovery, cust, and system partitions via fastboot without any luck. It always came back with remote: command not allowed. I am guessing that's due to the bootloader/FRP is locked?
Click to expand...
Click to collapse
My spontaneous comment to you is; Call Huawei and let them/service partner fix it.
EML-L29 via Tapatalk
curtricias said:
When you're frp is locked you can't use ADB/fastboot.
You're always end in erecovery? Just to make sure, you have unplugged USB cable? When you select latest firmware you've entered the right WiFi code?
Click to expand...
Click to collapse
Yes, it always boot back into the erecovery screen and the USB cable was not plugged in. When I selected latest firmware I've made sure the WiFi password is correct but it gave me the " Failed to download package info" error.
Kaherdin said:
My spontaneous comment to you is; Call Huawei and let them/service partner fix it.
EML-L29 via Tapatalk
Click to expand...
Click to collapse
I've tested the OTG dload method and it gave me the "Software installation failed." I will contact Huawei and have them fix it since I purchased the phone only 2 months ago. Thanks everyone for the help!
That's why you should always go for the full package download. Unless you did, then that's very unlucky. hope youll get it fixed asap!
Hello everybody
I am a beginner and before look for bootloader my Huawei m5 8.4, I would know if it is possible to have Android 10 or 11 on my tablet (Sht-w09)?
Thanks for your help
Perhaps my request seem strange but it is important for me to have the answer to do not mistake.
If it is impossible, I don't touch at my bootloader
Officially you will not get Android 10 or 11 on your SHT-W09, inofficially you can run the GSI-builds, e.g. from https://github.com/phhusson/treble_experimentations/releases
Thanks. I like the inofficialy solution
If I understood, I must install treble on my tablet and choose any version of Aosp?
you do not need to "install" treble. The Android version of the M5 is based on treble and that enables you to install those GSI images.
... are you sure you know what you are doing and you have your bootloader already opened? Please read and study a bit before starting to mess with ROM flashing. It's quite easy to create a brick
Yes you have reason when you wrote your post because I had use DC-unlocker for my bootloader but when I installed test point, my tablet has turned off and no longer turns on, no longer charges.
I tried power bottom during 30 s, volume bottom etc.
My tablet is dead.
@Renarde I'm really sorry to hear that. It's always better to be save than sorry.
Thanks you AnDiSa, but I think that nothing can be save
Anyone can help me please.?
Renarde said:
Yes you have reason when you wrote your post because I had use DC-unlocker for my bootloader but when I installed test point, my tablet has turned off and no longer turns on, no longer charges.
I tried power bottom during 30 s, volume bottom etc.
My tablet is dead.
Click to expand...
Click to collapse
It is not clear, did you successfully unlock your bootloader?? If yes, did you flash the right phh treble "*.img"?
No I don't unlock my bootloader, I only install Software testpoint and then my tablet had turn off for ever I think.
I do that :
DC-phoenix enable software TP
DCphoenix enable software testpoint
www.dc-unlocker.com
Renarde said:
No I don't unlock my bootloader, I only install Software testpoint and then my tablet had turn off for ever I think.
I do that :
DC-phoenix enable software TP
DCphoenix enable software testpoint
www.dc-unlocker.com
Click to expand...
Click to collapse
I read that that sw is able to downgrade emui, contact the dc-unlocker team or you could restore the original firmware with the Huawei suite.
My pc don't detect my Huawei m5
Renarde said:
My pc don't detect my Huawei m5
Click to expand...
Click to collapse
Neither in fastboot mode???
Fastboot mode don't work, I try it.
The screen is black, nothing happen, no light etc
Renarde said:
Fastboot mode don't work, I try it.
The screen is black, nothing happen, no light etc
Click to expand...
Click to collapse
I suggest to search on the web, any android devices should boot in fastbost or recovery mode. Do you try to downgrade the firmware or flash a wrong one?
I remember to enter in fastboot mode: while is off, press VOL UP then connect to a usb port the M5.
For the recovery mode: the M5 is off, press POWER+VOLUP.
I downgraded via Hi suite to Android 8 before doing the manipulations.
I try fasboot mode and recovery mode without sucess
Renarde said:
I downgraded via Hi suite to Android 8 before doing the manipulations.
I try fasboot mode and recovery mode without sucess
Click to expand...
Click to collapse
But android 8 booted? i think no. There is a guide to downgrade the os, you cannot simply flash an older firmware.
I found this, this user uses erecovery.