Related
Hello all, I have a problem because when you unlock my mobile phone started looping off and in general does not start.
I can not enter into TWRP because I gave erase all data. :crying:
What do I need to download? Where all this throw?
Im from poland and I do not know which version of the software should be good
I would greatly appreciate if anyone will be able to help me! :good:
EDIT#1
I download old firmware 5.1.1 from producent page i put dload folder on sd card and this is what happens
https://youtu.be/OyyD1vd8NHA
EDIT#2
If i connect usb cable to phone, instalation started, but its stuck on 90%
refresh!
hi.
try to Enter to fastboot mode. what does it tells you? locked or unlocked? and is it known in ADB?
@erfan7979
Its unlocked, adb dont see my phone
refresh
if i put same update.app my phone tells me its wrong software, what is going on...
http://forum.xda-developers.com/showthread.php?t=3163407
Sent from my CHM-U01 using Tapatalk
ShowMustGoOn said:
@erfan7979
Its unlocked, adb dont see my phone
Click to expand...
Click to collapse
you dont have some drivers.
phone have to be known in adb by :fastboot devices
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Anyone? Still locked out of my phone. :crying:
Reboot normaly > go to settings > developer setting > oem unlock check yes
#gggirlgeek
Reboot normaly > go to settings > developer setting > oem unlock > check yes
I can't get into the phone at all. It is FRP (Google) locked because I did a factory reset from recovery. I can only manipulate it from PC or stock recovery. I have ADB, Odin and Samsung Kies on my PC if that helps.
What is the reason I am getting the ODIN error: "Complete(Write) operation failed"? Is it due to the FRP lock?
If not, would flashing the same stock firmware even help? (I have read that it's not possible to flash older firmware versions.)
Is the boot partition where the FRP status is stored? Is it possible to flash a new boot image to reset it?
I assume flashing a custom recovery would be useless? I doubt it could be done without USB debugging/ADB being enabled anyway.
One of the reason for that odin error is flashing an old build of stock ROM, your guess is right
Even if you are able to flash a stock FW via ODIN you'll still not be able to boot to your OS.
You have to login using the same google id that was previously logged in
OR you have to bypass the Google Account Login Screen.
There are varous method on youtube (i know you saw them) to bypass that screen (Side Sync method worked for me at the 10th attempt) inorder to install a 3rd party app either to
1. enable the developer option or enable OEM unlock ( to flash custom ROM or custom recovery)
OR
2. to overwrite the previous google account saved with your new account details. (THIS ONE HELPED ME)
WITH FRP LOCK ON, ODIN SHOULD NOT GIVE YOU ERROR ONLY IF YOU ARE FLASHING STOCK ROM. BUT STILL YOU WILL BE LOCKED WITH GOOGLE ACCOUNT LOGIN SCREEN BECAUSE OF FRP LOCK ON AND STOCK ROM
FRP info. is saved in Sboot. Flashing a new sboot works only for devices those were never upgraded to Android 6. For J7 2015 that was upgraded to android 6, flashing Sboot bricks the phone as said by a cell phone repair agent
Regards,
Sid
@saddam.khan999 : Thank you so much for replying. This is helpful. :highfive:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Tried different USB ports, and even different PC's to get it to pop up on the phone. Tried old usb drivers too. Sidesync never senses it, and My Computer only show MTP folder that won't accept any file pasted to it.
You did this with Android 6.0.1 October 2016 update? They fix more holes every time.
Also, can you give me the link to the unlock tutorial you used with Sidesync? Just want to compare my method.
Hi,
gggirlgeek said:
This is helpful. :highfive:
Click to expand...
Click to collapse
How grateful I am to read the above line! Thanks :good:
gggirlgeek said:
You did this with Android 6.0.1 October 2016 update?
Click to expand...
Click to collapse
Yes on Android 6.0.1 but i dont remember the build date.
gggirlgeek said:
Also, can you give me the link to the unlock tutorial you used with Sidesync?
Click to expand...
Click to collapse
I tired two different tutorials of SideSync to crack it. Once I reach home in the next 10 hours from now. I'll search on youtube and give u the links. Right now I cannot remember it.
gggirlgeek said:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Click to expand...
Click to collapse
I followed below step to fix popup issue
1. Uninstall all samsung apps like, Kies, SmartSwitch, SideSync everything.
2. Uninstall Samsung USB drivers
3. Install SmartSwicth (to get best drivers)
4. Now install SideSync (latest)
5. Open SideSync and check for OTA updates in your PC (update it if available)
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
gggirlgeek said:
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
Click to expand...
Click to collapse
@gsmDabbler this guy says he/she can solve FRP issue for 5$ on skype. I dont know if he's fake or real. Best of luck
1. At welcome screen push next.
2. Connect to wifi and push next.
3. Accept terms and conditions and push next
4. Attempt to sign in to your google account.
5. On loopback to sign in page, push back intel you see the welcome screen again.
6. Push emergency dialer.
7. Dial 112
8. Put in on speaker and when the disbatcher askes what is your emergency, quickly swipe where the speaker option is to your left and click on email.
9. Ask the disbatcher for the number for non-emergency. (EXTREAMLY IMPORTANT TO NOT SKIP THIS STEP)
10. Sign into your email.
11. Compose a new message.
12. On another device download drive.google.com/file/d/0B3quVdCaxqLfaG9VY2xjd3hhWmM/view?usp=drivesdk[/url]
13. Move this file to a microsd card, and put it into the j7.
14. Push attach
15. Locate your sdcard and select es file explorer.
16. Once attached to the email, click on the box inside the email that says es file explorer. If redirected to security setting check the box that says "Unknown Sources".
17. If then redirected to install screen for es file explorer, install app and skip the next step.
18. Push back intel your on the screen with your new composed email with attachment, and once again click on es file explorer, and then install...
19. After install, restart your phone.
20. On welcome screen, plug your j7 into a power source.
21. Toggle your power button off, and then back on.
22. Click on the far right last bubble.
23. On home screen of es file explorer, take the sdcard out of the j7 and put back into the extra device you downloaded es file explorer to, and download these 2 files.
drive.google.com/file/d/0B3quVdCaxqLfNVFvMHlOWnNnY2M/view?usp=drivesdk[/url]
&
drive.google.com/file/d/0B3quVdCaxqLfc0gyRTBTNGNXOTA/view?usp=drivesdk[/url]
24. Copy these files to your microsd card from earlier, and put back into your j7.
------------> continued to next post of mine!
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip"]J700TUVU2APJ3_J700TTMB2APJ3_TMB[/URL].tar.md5
Where I got firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip[/URL]
Click to expand...
Click to collapse
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
?guys...no.. just Go to settings tap build 7 times go to developer options, turn on oem unlock, turn on usb debugging.ta dah.
mohitmallick17 said:
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
Click to expand...
Click to collapse
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
victhesunshine said:
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
Click to expand...
Click to collapse
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Saw a same issue please check & follow this steps if it helps you some way.
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
fullofhell said:
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
Click to expand...
Click to collapse
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
hightech316 said:
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
Click to expand...
Click to collapse
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
fullofhell said:
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
Click to expand...
Click to collapse
Thanks.
Drivers are installed.
Just cannot move from the google sign in.
There is a guide that shows how to use a USB drive with a shortcut apk on it , hooked up via OTG and is able to open settings. Although that did not work for me as well...
Maybe N version is different than MM ?
Almost the same problem here.....but in my j700f, I can't boot to recovery at all...can't flash stock firmware also due frp locked
"Custom Binary blocked by FRP lock" & Odin/PC won't recognize the device
Okay so,
My phone has been rooted for a year, I disabled OEM Unlock by accident, my antivirus was always telling me its unsecure with this feature on and to 'click here' to disable it.. I forgot how important this was to have enabled while rooted and ended disabled it and that night rebooting my device.
I get this error when trying to boot my device:
"Custom Binary blocked by FRP lock"
I have the original stock firmware, and Odin and want to reset the phone but when I plug this device in ( while in download mode ) > the windows PC doesn't recognize it (no new device sound or any change in devicemanager) and therefore odin isn't recognizing anything either - - I can grab my other 2nd-device and boot it into download mode, plug it into the same setup and boom > recognized and 'Ready!' Status in odin almost immediately so I don't think it's my PC or the cables -- I don't think 1st-device has usb debugging enabled either and I'm not sure how to proceed ...
any help is much appreciated ...
Try to use Smart Switch (from Samsung website), which also has the latest drivers, to recover your phone. (Google "how to recover with smart switch")
Alright,
Forgot to mention I tried Samsung Kies but cannot find the serial number on the device, I'll give Smart Switch a try this evening on my other PC and report back... hopefully that PC recognizes it, my tablet connects to this laptop but not the phone.. could USB debugging being disable cause this?
How close to bricked is this?
I'm such a fool!
Thanks for the feedback so far..
Hi boot tar flash odin frp lock of after stock rom flash
I went through this a few weeks back. I found my serial number (was a sticker originally on back of phone) and used smart switch to recover firmware. Then enabled developer options, oem unlock, flash TWRP thru ODIN etc etc.
So if I find the serial number, I save it .. good to know, thanks!
Hi boot tar flash odin frp lock of after stock rom flash
Click to expand...
Click to collapse
Can you elaborate just a bit?
zerotrick said:
Okay so,
My phone has been rooted for a year, I disabled OEM Unlock by accident, my antivirus was always telling me its unsecure with this feature on and to 'click here' to disable it.. I forgot how important this was to have enabled while rooted and ended disabled it and that night rebooting my device.
I get this error when trying to boot my device:
"Custom Binary blocked by FRP lock"
I have the original stock firmware, and Odin and want to reset the phone but when I plug this device in ( while in download mode ) > the windows PC doesn't recognize it (no new device sound or any change in devicemanager) and therefore odin isn't recognizing anything either - - I can grab my other 2nd-device and boot it into download mode, plug it into the same setup and boom > recognized and 'Ready!' Status in odin almost immediately so I don't think it's my PC or the cables -- I don't think 1st-device has usb debugging enabled either and I'm not sure how to proceed ...
any help is much appreciated ...
Click to expand...
Click to collapse
Hey man, im having the exact same issue with my S7 edge.
So I got my IMEI number, and with my number I went to imei. info / and I got my serial number through a warranty check through the site, you have to register to do it.
I used Smart Switch and I get an error when trying to use the emergency recovery "Model number cannot be initialized"
I'm also getting the error on my PC when trying to connect my device to odin saying that "USB device cannot recognize" and with that I cannot flash the stock firmware on the device.
So if you have gotten any solution to the FRP lock please let me know.
Serial number is engraved on back cover next to the imei number -,- @samuraichick0n about "Model number cannot be initialized" try to write it in diffrent forms eg. G935f or SM-G935f uppercase or lowercase.
Domino5 said:
Serial number is engraved on back cover next to the imei number -,- @samuraichick0n about "Model number cannot be initialized" try to write it in diffrent forms eg. G935f or SM-G935f uppercase or lowercase.
Click to expand...
Click to collapse
Thank you for the response. I will give this a go when I get home later today.
samuraichick0n said:
Thank you for the response. I will give this a go when I get home later today.
Click to expand...
Click to collapse
If smartswitch doesn't work you can download latest firmware for you model number and flash using odin, should solve your issue very quick
dusterphil said:
If smartswitch doesn't work you can download latest firmware for you model number and flash using odin, should solve your issue very quick
Click to expand...
Click to collapse
PC doesnt want to recognize my device, so Odin doesn't pick it up.
Try it with other usb cable. What is given together with the charger is incongruent, it happened to me, the same problem. (galaxy s6, s7)
And you need the newest odin. Excuse me my crappy English.
feri1969 said:
Try it with other usb cable. What is given together with the charger is incongruent, it happened to me, the same problem. (galaxy s6, s7)
And you need the newest odin. Excuse me my crappy English.
Click to expand...
Click to collapse
I've tried everything, and I still cant get the PC to pickup the phone to flash with Odin.
samuraichick0n said:
I've tried everything, and I still cant get the PC to pickup the phone to flash with Odin.
Click to expand...
Click to collapse
Tried a different PC?
*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
samuraichick0n said:
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
Click to expand...
Click to collapse
Hardware fault with the phone then
Need same kind of help
samuraichick0n said:
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
Click to expand...
Click to collapse
Hi just wanted to no did you get it fixed and if so how I can’t find help anywhere. Thanks
ladyhypa said:
Hi just wanted to no did you get it fixed and if so how I can’t find help anywhere. Thanks
Click to expand...
Click to collapse
Hello, after exhausting all options I had to take the device to Samsung themselves - eventually they had to replace the motherboard on the phone to fix it.
So check if your phone is under warranty and take it in.
I fixed this when I first rooted by flashing the stock bootloader, firmware etc everything through odin
Thanks
samuraichick0n said:
Hello, after exhausting all options I had to take the device to Samsung themselves - eventually they had to replace the motherboard on the phone to fix it.
So check if your phone is under warranty and take it in.
Click to expand...
Click to collapse
Ok seems like what most people are saying but unfortunately mine is not under warranty but thanks for your reply anyway.
Hi,
I have the honor 8 FRD-Al00 (chinese) only 2 days .
The phone ask to update the emui, and i did but now the phone is stock in erecovery mode when ask to download the latest version and recovery via wifi but fail every time.
I try to reset to fabric settings but don´t work.
i don´t know what happen and i don´t know what to do anymore.
Please anyone can help me?
Thanks
Rommco05 said:
Where you buy phone? You have warranty?
Click to expand...
Click to collapse
is a gift, but i know is from gearbest but if i can resolve the problem here is better than send the phone to chine and all the process.
Rommco05 said:
hm another bad situation. For your model isn't (or I don't know where) full firmware which can be useful. Try this, install HiSuite to PC and here is one section to repair phone, follow instruction in this program.
edit: try reset your wifi setting, setup for short without possword and try again download via eRecovery latest version
Click to expand...
Click to collapse
i have try the two methods but don´t work. via wifi fails everytime. via hisuite the recovey said the phone is not supported
Rommco05 said:
Fastboot recognized phone? If yes which Android you have last one? You can try unlock bootloader and flash custom recovery TWRP and after custom rom, thats maybe can help but warranty will be gone after amd I really don't know what happened after unlocking bootloader
Click to expand...
Click to collapse
you want to know if i can enter in menu fastboot? power and volume down key? yes and said Phone locked Frp lock. the android in the begin are 7.0 but after this happen i try to reset to fabric so now i don´t know.
Rommco05 said:
FRP lock and in HiSuite isn't option rollback?
edit: check this http://cn.club.vmall.com/thread-11316965-1-1.html
Click to expand...
Click to collapse
in hisuite the only option is system recovery but the phone is not supported
Rommco05 said:
Sorry man I think you must use warranty or some other member have more info like me
Click to expand...
Click to collapse
Thanks for try to help me.
If anyone else knows how to help me please let me know.
And i continue to investigate and if i know a solution i post here for others with the same problem.
Do you have unlocked bootloadrr
venugopalu007 said:
Do you have unlocked bootloadrr
Click to expand...
Click to collapse
no, i have made anything to the phone
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Rommco05 said:
ufff, factory reset in stock recovery? Or try again repeat setup
edit: how you fix boot to ROM?
Click to expand...
Click to collapse
i made the factory reset but the phone is stuck in startup. don´t exit the startup
i have some firmwares for this and i try lol if i can make this to work right i make here my all processe and links for everyone. but know i'm stuck on this
Rommco05 said:
It is Nougat or Marshmallow?
Click to expand...
Click to collapse
Marshmallow
Rommco05 said:
Again flash ROM via dload
Click to expand...
Click to collapse
i made but is the same
MagicMinds said:
i manage to boot the phone but now is in startup menu to choose the language and so on, but in loop, when i finish with the finger print he go to the first step. anyone can help me?
Click to expand...
Click to collapse
hold a moment , do you use VOLTE based Sim??
Honor 8 FRD-AL00 Briked
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
bugsbunny69 said:
Hi I have a problem also with honor 8 with rom FRD-AL00, I unlocked the phone I installed the twrp recovery while installing the rom eu L09 the smartphone turned off black screen but it was a fastboot, i restored with the original ROM with DC -Phoenix everything ok but with android test, later because I'm stubborn, I tried to flash the rom L09 with DC_Phoenix successfully the L09 but I found them all changed zero and also the S / N, I tried several times to reflash with the Original rom but at some point it is briked the phone lights up alone when it is loaded and then comes into sdcard recovery but always with 5% and software install failed, even without SDcard inserted, does not vieve recognized by the PC, does not enter In fastboot, the PC only recognizes it when it's on the software install failed screen with the entry (Linux File-CD Gadget USB Device) this is the only way to connect to the computer. I also tried all the options with volume and power buttons but nothing. Looking for help as I can solve it?
Thank you!
Click to expand...
Click to collapse
Are you able to flash twrp?
Unfortunately, I can not get in any way to restart with recovery from SDcard but it does not recognize any firmware stops at 5% with the following message (software install failed).
thank you!
Rommco05 said:
U can boot to fastboot, if yes which status have FRP and PHONE are both unlocked?
Click to expand...
Click to collapse
No! I have already explained it does not enter fastboot and is not recognized by the PC, the only way is sd card but I tried various firmware stops at 5% even seza sd card.
When it enters sdcard recovery mode and connects to the PC it is reconnected in this way as a CDROM (linux file-cd gadget usb device).
Thank you!
Rommco05 said:
I don't know what next, leave him again discharged because u need fastboot and in recognise phone, if u can't boot to fastboot u can't do anything this a serious problem
Click to expand...
Click to collapse
I know I just have to try to give it back, hoping it's a guarantee with the Chinese people, I've already made a complaint that after two days the smartphone gave me problems, but the support office opens on 28/8.
Thanks for everything!
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
I need help ;-;
gagi92bb said:
I have honor 8 al00 . And the same thing happens to me. But you just need to put the firmeware on the sd card and start it from the bootloader.
if you need help send me a message
Click to expand...
Click to collapse
I have a honor 8 al00, i can't restore ;-;
So far I always found answers to all my questions here without ever asking. This forum is awsome! Thanks to everyone here doing good work!
My problem: I have the European version of the Honor View 10. I opened bootloader, I installed the Magisk correctly with the 15.4 version, worked all fine. (thank you topjohnwu)
Then MY mistake ... I wanted to install Xposed Installer. I was not concentrated that moment and took the wrong version! From my other Honor phone (android 6.0, version 89, arm64). Absolutely stupid!
Phone restarted ... bootloop ... and goes into eRecovery. I tried everything I could there, clear dalvik cache, factory reset. > no change!
Then I thought ok, connect to PC, safe mode ... adb ... but no success. adb devices brings no result. PC does not find my phone anymore. I hoped I could get into my phone by connecting with PC, but it seems I am unable. So I can not help myself this way.
Next try was to force the phone to update with SD card. I only found asian update software, but I already did not care. I want to save my phone. Update starts, but after 5% it stops, update fail.
Now I hope that someone here can help. I have no idea what else I could do. Best regards, Markus
mark_at said:
So far I always found answers to all my questions here without ever asking. This forum is awsome! Thanks to everyone here doing good work!
My problem: I have the European version of the Honor View 10. I opened bootloader, I installed the Magisk correctly with the 15.4 version, worked all fine. (thank you topjohnwu)
Then MY mistake ... I wanted to install Xposed Installer. I was not concentrated that moment and took the wrong version! From my other Honor phone (android 6.0, version 89, arm64). Absolutely stupid!
Phone restarted ... bootloop ... and goes into eRecovery. I tried everything I could there, clear dalvik cache, factory reset. > no change!
Then I thought ok, connect to PC, safe mode ... adb ... but no success. adb devices brings no result. PC does not find my phone anymore. I hoped I could get into my phone by connecting with PC, but it seems I am unable. So I can not help myself this way.
Next try was to force the phone to update with SD card. I only found asian update software, but I already did not care. I want to save my phone. Update starts, but after 5% it stops, update fail.
Now I hope that someone here can help. I have no idea what else I could do. Best regards, Markus
Click to expand...
Click to collapse
Did you already try ro flash ramdisk and system sith stock images via fastboot?
alohahe3000 said:
Did you already try ro flash ramdisk and system sith stock images via fastboot?
Click to expand...
Click to collapse
I would flash anything ... if I could! That is my problem at the moment and I can not solve it.
When I start phone I get into Huawei eRecovery after two tries to boot > does not help!
When I connect to PC > phone gets not detected! (during boot try it gets connected shortly ... but then gets disconnected after some seconds, in between I can not get into phone via PC)
So when I would want to use fastboot .... not possible because of that issue. I tried to connect in fastboot mode ... but no difference. Actually I do not understand why I can not connect to PC anymore!
The only way I can imagine now is flash or update something via SD card. I tried with asian update.zip, but it will only go to 5% .... and then ends.
But to be honest ... I am not very optimistic about finding any solution. I think only some very smart pro from this site might have an idea. But not sure if these guys read questions about bootloops.
mark_at said:
Next try was to force the phone to update with SD card.
Click to expand...
Click to collapse
Try to flash via Fastboot the stock rom... do a full wipe and reboot.
here the link to the stock ROM:
https://mega.nz/#!W9hjiTgZ!_ZGq7V83bkWPF_Ue7_c41wVXNrQ_YjnsQUxRS0_MevU
Taobaibai said:
Try to flash via Fastboot the stock rom... do a full wipe and reboot.
Click to expand...
Click to collapse
Thanks for the link. But how can I flash via fastboot when my phone is not detected from the PC? That is my main problem at the moment!
That is why I wrote about all things I had tried already. And being unable to connect to the computer is really worrying me!
"adb devices" will not find my phone!
mark_at said:
Thanks for the link. But how can I flash via fastboot when my phone is not detected from the PC? That is my main problem at the moment!
That is why I wrote about all things I had tried already. And being unable to connect to the computer is really worrying me!
"adb devices" will not find my phone!
Click to expand...
Click to collapse
You have to boot into fastboot modus. When booting, push power and Volume down button. A white screen appears if device is connected with PC.
Then try "fastboot devices". If your device is displayed, you can flash with "fastboot flash" system image. Stock system.img download link can be found in AOSP thread, second post.
alohahe3000 said:
You have to boot into fastboot modus. When booting, push power and Volume down button. A white screen appears if device is connected with PC.
Then try "fastboot devices". If your device is displayed, you can flash with "fastboot flash" system image.
Click to expand...
Click to collapse
Exactly
alohahe3000 said:
Stock system.img download link can be found in AOSP thread, second post.
Click to expand...
Click to collapse
Or just use my link. I copied it from the AOSP Thread
I managed to get my phone displayed when I entered fastboot devices.
And I managed to flash the img!! Hurra !!
Thank you very very much to everyone here helping me ...
I thought that nothing would work because when I typed "abd devices" nothing happened. But when I typed "fastboot devices" the phone was there.
mark_at said:
I managed to get my phone displayed when I entered fastboot devices.
And I managed to flash the img!! Hurra !!
Thank you very very much to everyone here helping me ...
I thought that nothing would work because when I typed "abd devices" nothing happened. But when I typed "fastboot devices" the phone was there.
Click to expand...
Click to collapse
It wasn't so difficult.
Viel Spaß mit dem Smartphone!!!
one more thing I have to add:
after flashing the system.img from the link above .... I have FRP lock .... that was not before.
does it mean I have to relock my bootloader and then unlock it once again? In some other thread I found that information.
mark_at said:
one more thing I have to add:
after flashing the system.img from the link above .... I have FRP lock .... that was not before.
does it mean I have to relock my bootloader and then unlock it once again? In some other thread I found that information.
Click to expand...
Click to collapse
and now I relocked bootloader .... and guess what? bootloop again ... and I can not unlock it again, because I did not think about enable OEM unlock! It says necessary to unlock FRP before.
I am terribly sorry for being such an idiot!!
mark_at said:
and now I relocked bootloader .... and guess what? bootloop again ... and I can not unlock it again, because I did not think about enable OEM unlock! It says necessary to unlock FRP before.
I am terribly sorry for being such an idiot!!
Click to expand...
Click to collapse
Never ever relock bootloader untill you have a backup plan. We have dload method till emui 7 buut not sure on EMUI 8 so can't suggest you anything at the moment. Someone played with EMUI 8 can guide you through it.
I understand that I was not allowed to relock bootloader! I feel awful and stupid about it ... believe me!
I was able to erase FRP with HCU client from DC Phoenix.
After that I was in phone again
And afterwards I could open the bootloader again.
Halleluja!!
Thanks for everyone's help here ...